Boiler diesel double-circuit kiturami turbo 30 r. Overview of Kiturami diesel boilers - technical specifications

Warranty Terms

1. The warranty is issued by the manufacturer in addition to the constitutional and other consumer rights and in no way restricts them. The warranty obligations described on the website and in the warranty card are valid in the territory Russian Federation and EAEU countries. The warranty card, together with the installation and operation manual, is the passport of the product.

1.1 Warranty obligations are provided by the trade / installation organization that sold the equipment, spare parts to the consumer.

1.2 The warranty is valid only when the equipment is put into operation (first start-up) by a specialized certified organization that has official authority to do so.

1.3 Warranty work is carried out by the organization that commissioned the equipment (in the absence of other warranty agreements) and / or a certified organization authorized by Kiturami to do so.

1.4 For the implementation of the first start-up and subsequent maintenance of the equipment Kiturami we recommend that you contact service organizations Kiturami("Kiturami"). Addresses and phone numbers of service organizations Kiturami You can ask the trade organization, dealer organization of the company Kiturami in your region, or through the site www.kiturami.ru .

1.5 Knowing the local conditions, the parameters of electricity, gas, and water supply, the service organization has the right to require the installation of additional equipment (voltage stabilizer, magnetic or polyphosphate water converter, water and gas filters, etc.).

1.6 The Buyer has the right to eliminate factory defects in the product free of charge during the warranty period.

1.7 Keep the receipt for the purchased product. Keep the warranty card together with the installation and operation manual. The warranty card is integral part installation and operating manuals.

2. Warranty periods.

2.1 The warranty period for the equipment is one year (12 months) from the date of its commissioning, but not more than 18 months from the date of sale of the equipment. Commissioning and regular service Maintenance made at the expense of the client.

2.4 List of boiler models of the company Kiturami with a warranty extended from 1 year to 3 years is determined by the regional sales organization and / or service organization independently.

2.5 The warranty period for components and components replaced after the expiration of the warranty period for the equipment is 12 months. As a result of repair or replacement of units and components of the equipment, the warranty period for the equipment as a whole is not updated.

3. Warranty obligations become invalid in the following cases:

3.1 Non-compliance with the requirements of current regulatory documents for the design, construction and operation of boiler plants, gas-using equipment and heat-consuming power plants.

3.2 Failure to comply with the requirements specified in the installation and operation manual.

3.3 Non-compliance with the current Russian norms and standards for water, fuel (gas, diesel), power supply systems.

3.4 Non-compliance with the requirements of the service organization.

3.5 Absence or illegible manufacturer's label on the product.

3.6 Careless storage of equipment, mechanical damage during transportation or installation.

3.7 Damage caused by freezing of water in the circuits of boiler equipment.

3.8 Non-compliance of liquid fuel with the requirements of GOST 305-82 Diesel fuel.

3.9 Non-compliance of the coolant with the requirements of GOST 2761-84* Quality class 1.

3.10 Damage or deterioration of the equipment due to the formation of scale.

3.11 Lack of documents confirming the commissioning of the product (first start-up) by a specialized organization.

3.12 Incorrect or incomplete filling of the warranty card, its absence.

3.13 Using the product for purposes for which it was not intended.

I was looking for a used backup diesel boiler. My main heating closes on electricity and a fireplace with a water jacket Optima Aqua 700Sh. Diesel is needed to support TA in very coldy and in case of a power outage (connected via an uninterruptible Smart UPS 3000VA).

There are few offers on the secondary market, starting from 15 tr. (at the price of a new 30 tr.), but occasionally there are offers for 10 tr. Most often, happy homeowners who have been supplied with gas get rid of diesel boilers. Therefore, the condition of the boilers is quite good, they have worked for 1-2 seasons.

And then one day I turned up Kiturami Turbo 30R (35 kW) for 7 tr. I examined it and bought it. I brought it home, tied it to CO, put a 200l plastic fuel barrel, replaced the fuel filters and 1 fuel line hose.

The boiler began to give error 01 at startup. Error 01 means that there is no ignition of the fuel. I rummaged through the Internet and formulated "troubleshooting", i.e. how to solve this problem step by step:

  1. We check the voltage in the network. The voltage should be standard 220-230 V ().
  2. Checking the fuel line. There must be no air leakage at the fuel supply to the fuel pump of the boiler.
  3. We check the fuel filter. The fuel filter may be clogged, making it difficult to supply fuel in the proper amount. If clogged, replace the fuel filter.
  4. We check that the fuel does not flow by gravity (relevant for boilers 21R, 30R).
  5. Possibly poor fuel quality. Change the fuel, or try to close the choke and apply a richer mixture. The damper is located on the left end of the burner (see diagrams below).
  6. We check the flame control sensor (photocell). The sensor can be pulled out of the burner body by turning it along the axis (see diagrams below). Wipe clean with a dry cloth, the protective cover from the end should be perfectly transparent. If the front cover is removed, the photocell may react to extraneous light and give an error.
  7. We check, clean (or change) the nozzle and ignition electrodes. They can be reached by removing the entire burner from the combustion chamber flange (see diagrams below).
  8. We check the operation of the ignition transformer. It should give a spark to the ignition electrodes (I don’t know how to check the spark, I haven’t reached this stage of troubleshooting).
Schemes of burners for diesel boilers Kiturami Turbo 13R, 17R:

Schemes of burners for diesel boilers Kiturami Turbo 21R, 30R:

I stopped at stage 5. He covered the air damper with his hand and the boiler started up. Obviously, the turbine simply blew diesel fuel into the combustion chamber with such force that the electrodes simply could not ignite it. Excess fuel after stopping the boiler with error 01 seeped through the burner flange. Using the method of scientific poke, I adjusted this damper so that the boiler starts at the next cycle without error.

The problem that I have not yet been able to overcome is condensation in the chimney. During a cold start, there was so much of it that a sickly puddle flowed onto the floor. It flowed both through the chimney steam trap and through the elbow that comes from the boiler.

  • High efficiency due to 3-PASS design
  • Low Noise Boiler
  • DHW heat exchanger made of stainless steel
  • Stable hot water in large volume
  • Built-in turbo cyclone burner
  • Compact and easy installation

Safety, convenience and customer satisfaction have been the main goal of KITURAMI for 40 years!

For increase efficiency boilers Kiturami (KITURAMI) TURBO, the design of multiple passage of combustion products inside the heat exchanger is used.

The KITURAMI TURBO boiler has the "Absence", "Shower", "Sleep" functions, which can significantly reduce fuel consumption. And also the presence safety devices as a sensor low level water, overheating and other devices will ensure complete safety when using the boiler.

The design of multiple passage of combustion products inside the heat exchanger increases efficiency, and also reduces the level of acoustic noise.

Thanks to the stainless steel DHW heat exchanger, scale formation is prevented and clean hot water is provided.


The turbocyclone burner achieves the highest efficiency of fuel combustion due to a special plate (FCH₂) heated up to 800°C, thus reducing fuel consumption.

The capacitive heat exchanger of the heating circuit of the Kiturami TURBO boiler allows you to almost instantly get hot water from the DHW circuit.

The Kiturami (KITURAMI) TURBO boiler does not require a lot of space for its installation, and is also easy to carry.

Model of boilers Kiturami (Kiturami) Turbo

13R

17R

21R

30R

Heating capacity/DHW

Average consumption of diesel fuel for the heating season

Hot water capacity

dT=25°C

dT=40°С

Heat exchanger area

Heat exchanger capacity

Pipe diameter

heating input/output

DHW inlet/outlet

chimney

Width

Length

Height

Weight

Consumed e. energy

The floor diesel copper of Kiturami TURBO-30R - the small-sized copper working at liquid fuel. This practically trouble-free, economical boiler is produced on the basis of forty years of experience in the manufacture of several million boilers and the introduction of new technologies.

Advantages of the Kiturami TURBO-30R floor standing diesel boiler

The latest computer software for self-diagnosis. The safety of the boiler is ensured by the functions "Absence in the room", " Hot water", "Sleep", sensors for combustion, lack of fuel, self-diagnosis function, which are developed using technologies corresponding to the current level of development of computer technology.

Turbo cyclone burner. Developed by latest technology world-class turbocyclone burner, in which, according to the principle of an automobile turbo engine, a secondary afterburning of fuel takes place on a special metal board heated to 800 degrees Celsius, shows the unique qualities of fuel economy and protection environment from pollution.

You can buy a floor diesel boiler Kiturami TURBO-30R in the ProTeplo-SPb online store.

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.

Delivery to the entrance (check with the manager about the possibility of raising to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Specify exact terms of delivery at the manager!

Pickup points

Delivery cost in Moscow and the Moscow region:

  • Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
  • Outside the Moscow Ring Road up to 10 km - 700 rubles,
  • Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
  • In the regions, delivery by a transport company (calculated individually).

Shipping cost for

km from MKAD

700 rub.

Unloading of bulky goods is carried out by the forces and means of the customer.

Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.

Payment bank card courier upon receipt

Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the site

To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:


After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.

This site supports 256-bit encryption. Privacy Reported personal information provided by OJSC "Sberbank of Russia". The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, interest is not charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

    Limited Liability Company "Teplovod-Service"

    OGRN: 1105003006162

    TIN: 5003088884

    Checkpoint: 500301001

    BIC: 044525225

    Bank: PJSC Sberbank of Russia

    R/s: 40702810838060011732

    K/s: 30101810400000000225

    Jur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6

Special conditions

    For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

    For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.

  • For any item shipped transport company, 100% payment is required.