Vertical heated towel rail with lateral connection. Water heated towel rail with side connection

Most manufactured by manufacturers of sanitary equipment water heated towel rails have lateral connection(or supply). Among them:

classic coil devices M-shaped or U-shaped;
foxtrot devices;
devices - "ladder", etc.

A water heated towel rail is essentially the same radiator, only with slightly different functions. In order for the device to successfully fit into existing system heating and hot water supply, without disturbing its functioning, it is necessary to perform its correct connection.

Towel rails with side connection have two or four holes. The easiest way to connect is for devices with two holes. They are connected to two pipes - "supply" and "return". The first is the pipe through which hot water enters the appliance, the second is the one from which the water comes out and follows further through the heating system.

The device can be connected to the heating system or directly to the hot water riser. When connected to the heating system, it will function throughout the heating season. When combined with a hot water system, the intensity of heating will directly depend on the intensity of your hot water consumption.

To connect the device to heating or hot water pipes, fittings or an adapter with an internal or external thread (“American”) are used. When connecting appliances to centralized heating with a separate riser, it is recommended to use radiator valves that regulate the intensity of the water flow.

In assortment online store MirCli presents a wide variety of product models with side connection. You can choose devices with the most diverse pipe shapes, designs, surface colors and textures (mirror, glossy, matte), number of connection points, etc. You can buy all the models presented in the catalog of the online store at the best price in Moscow and other regions of Russia.

You can buy heated towel rails with side connection water from stainless steel at competitive prices in Moscow in our online store with delivery! A wide range of side heated towel rails in many sizes - 50, 32, 60 and 40, 30 and 80. You can choose the right model for your bathroom thanks to a variety of stylistic and design solutions. We offer heated towel rails with a side connection with a ladder and with a shelf for every taste and budget!

Advantages of heated towel rails with lateral connection.

The side connection of a heated towel rail can be considered classic, because in most Soviet and Russian apartments they are connected that way. Stainless towel warmers with lateral connection easier to install, with them there are fewer problems during operation. They fit under standard sizes pipes in apartments.

The appearance of the coils of such coils varies according to your preferences. You can choose the classic M or U-shaped version, experiment with style, or buy a small ladder with a shelf for convenient drying of clothes.

Towel rail with side connection perfectly complements the bathroom, made in a classic or strict European style. Small size, time-tested functionality and excellent consumer qualities make these radiators a modern, practical solution.

Before buy side heated towel rail, it is worth deciding on appearance, dimensions and the possibility of placement in your bathroom. The SanPrice store has a huge range of dryers for affordable prices with the author's, non-standard or classic design.

You can always choose a coil yourself or ask our consultants for help.

Water heated towel rails with side connection and vertical connection are leaders in the market of heated towel rails. Today, almost all bathrooms in high-rise buildings are equipped with heated towel rails. These useful devices, in addition to their main function - drying towels and a variety of small linen, heat these rooms, create a favorable microclimate there, which prevents the formation of dampness, fungus and unpleasant odors. The most popular of them is a water heated towel rail with a side connection. The existing modern market offers a huge range of these devices, and experienced professionals offer their installation services. To figure out how to choose the right bathroom accessory, understand the installation and connection process, you need to study a certain amount of information and choose the best option for yourself.

1 Benefits lateral connection
2 What to look for when choosing a heated towel rail
3 The procedure and nuances of replacing a heated towel rail
- 3.1 Materials and tools
- 3.2 Dismantling
- 3.3 Installation and arrangement of the bypass
- 3.4 Features of installation, fastening, connection
4 Conclusion

Benefits of side connection

The connection of the heat carrier to the heated towel rail in our houses can be made from a hot water supply riser or a heating system. At the same time, the most reliable way of its supply and installation is the lateral connection.

You need to correctly name such an installation vertical connection, since the location of the heated towel rail in relation to the riser can be on the left or right sides of the model. Its advantage is that it:

Not associated with damage to the surface of the walls;
Can be performed after completion of finishing work;
It does not require additional laying of pipelines and is mounted in the main risers.

What to look for when choosing a heated towel rail

To choose the right equipment for drying towels in the bathroom, you should always remember that it will be in conditions high humidity and coolant pressure. Therefore, when choosing, you need to focus on:

The indicator of working pressure, which must be at least 6 atmospheres;
The diameter of the outer pipe, the optimal size of which is desirable is 22 mm, since a smaller diameter will reduce heat transfer;
The interval between the axes of the dryer;
The presence of a nickel-plated surface to increase the anti-corrosion resistance of the product;
The distance between the openings of the inlet and outlet of the coolant;
The configuration of the device that affects the effectiveness of its functionality;
The material of its manufacture.

Towel warmers that represent on modern market manufacturers are made from various materials as:

Stainless or galvanized steel;
Chrome plated brass;
polymer materials.

The best are, of course, stainless steel products. Almost all of them are covered with a chrome layer and polished to a mirror finish.

In order for the purchase to be in good working order and please with its durability, the walls of the heated towel rail pipe must have a thickness of at least 1.5 mm. Products for drying towels can be chosen in various shapes, these can be:

Ladders;
coils;
non-standard;
Lyre-shaped;
P or M shaped designs.

The total length of the dryer pipe and the number of steps has a direct relationship with the size of the bathroom. If the area of the room is up to 8 square meters, then it will be sufficient for him to install a device with 3-4 steps or a zigzag. With an increase in the area, this heater must also be increased.

The procedure and nuances of replacing a heated towel rail

In the case of replacing an old heated towel rail with a new device, it is necessary to turn off the heat carrier supply. If, before the repair, a spare channel was not installed in the bathroom for emergency disconnection from the DHW or heating system, it will be necessary to resolve the issue with the Housing Office for the temporary shutdown of the entire riser. If the dryer is connected to the heating pipes, these works can be carried out painlessly in the summer when the heating system is not working.
The whole process of the procedure for installing a new dryer is carried out in three main stages.

The old heated towel rail is removed, and pipes are prepared for the installation of new equipment.
A bypass is arranged and connected to the main pipe of the coolant supply system with a ball or valve valve.
The main installation of new equipment to the pipes of hot water supply or heating is carried out and its performance is checked.

Materials and tools

To perform work on the dismantling of old equipment with your own hands and the installation of a new one, you need to stock up on certain tools and materials, namely:

Welding inverter for cutting old pipes or a grinder;
A die for threading a heating pipe;
bypass;
Required fittings;
Ball or control valves;
Tees for a bunch of branched pipelines;
Shut-off valves;
Tape fum for wrapping threads at the joints.

For connecting pipes, you can use:

Copper;
steel;
Polypropylene.

Copper pipes are characterized by durability, ease of installation, absence of rust in them during operation. Steel - are subject to corrosion, have a significant weight, but are cheaper than their counterparts. Polypropylene - the most convenient. They are lightweight, durable, mounted with fittings, do not corrode.

When installing a new heated towel rail, you need to choose pipes from a material that will be compatible with the main coolant supply pipes.

Dismantling

Installation of a new heated towel rail begins with the dismantling of the old version. To do this, you first need:

Disable hot water in agreement with the Housing Office. This is done by closing the main valve on the riser.
After the water drains from the riser, you need to remove the old heated towel rail. If it is previously mounted on threaded connections, they are simply unscrewed. If it is welded to the pipe as a whole, use a grinder for trimming. Here it is necessary to take into account the fact that the rest of the pipe must be left long enough to cut a new thread for the fittings.
Then, holding the old dryer, it is removed from the brackets and taken out of the room.

Bypass installation and arrangement

The bypass is a jumper made of a piece of pipe between the riser and the heated towel rail, which is equipped with connecting elements. He is the zone rapid response in unforeseen situations. When installing a bypass, the ends of the heated towel rail are equipped with ball valves, which stop, if necessary, the flow of coolant. When the heated towel rail is turned off, the coolant continues to circulate through the bypass without disturbing the operation of the riser.

Thus, the bypass ensures the full functioning of the heating system or DHW in the event of repair work in the apartment. For emergency situations or removal of air from the general communication system, the jumper itself is equipped with another third valve.

Features of installation, fastening, connection

Starting the general installation, you must carefully study the installation instructions for the heated towel rail from the manufacturer and remember that:

The coolant must move from top to bottom through the heated towel rail. Therefore, the input connection must pass through the upper socket of the installed equipment.
The distance from the edge of the wall to the main axis of the dryer pipe with a diameter of up to 23 mm should be -35 mm, with a diameter of 23 to 50 mm - an indent should be 50 -55 mm.

At the stage of installing and fixing the heated towel rail with your own hands, you need to have an assistant nearby to properly align the installed device.

Before installing the heated towel rail, you need to attach the brackets that are included in the kit to it, and then attach this structure to the wall at the main location.
After the approximate installation, the places of future holes are marked on the tile with a pencil, which are made using a drill and a special tile drill. Plastic dowels are inserted into the finished holes.
Then the heated towel rail is finally attached to the wall and fastened with screws through the brackets into the dowels with a screwdriver.
Having installed the dryer on the wall, it must then be connected using fittings through the bypass and valves to the riser.
All fasteners are tightened carefully. To seal threaded connections, fum tape or linen winding is used.
After completion of work, the entire system is checked for leaks. The taps are opened very carefully to gradually fill the volume of the heated towel rail with water so that there is no water hammer.

Conclusion

V Lately installation of a water heated towel rail with side connection is the most common. Since this bathroom accessory not only dries towels, but also creates comfortable conditions for taking hygiene procedures, being an additional source of heat.

Today, new models of these devices appear in the distribution network with rotary mechanisms, additional shelves, convenient hooks that expand their functionality, make the bathroom interior more comfortable and attractive.

Modern heated towel rails perform several functions at the same time - drying clothes and heating the bathroom. The choice of equipment model depends on design features premises and the needs of the owner. Side connection devices is the most common and in demand. It eliminates the need for central heating.

The metal product is connected directly to the riser, so it does not create problems during installation and operation. Another advantage of this model is space saving in the bathroom. The heated towel rail has a compact shape, but allows you to evenly distribute the laundry over the entire surface of the pipe.

Online store "Trugor" invites you to familiarize yourself with a wide range of water heated towel rails with side connection. In the catalog you will find the following models:

large-sized structures with a large area of heat exchangers

Such a variety will allow you to choose the right model for any bathroom. Choose a trusted supplier to appreciate the high standards of service.

What should you pay attention to when choosing?

An important selection criterion is the connection point. Depending on the model, it may be located on the right or left. When buying a heated towel rail of this type, be sure to consider the layout of the bathroom.

On the website of the online store "Trugor" you can choose a model according to the following criteria:

connection side;
price;
height and width;
center distance.

Products are made of the best stainless steel, which resists negative influences environment and retains its original shine for a long time. The company supplies customers with designs with

Convenient both during use and during installation, side-connected towel rails of the “Rt” series are gaining more and more devoted fans every year. And the main merit of this, in addition to the excellent quality of such structures, is a whole list of their undoubted advantages. Welded construction ensures the reliability of the product, even in the case of sudden temperature changes and strong water stress. Whereas a sufficiently large heat transfer area is achieved due to the presence of several crossbars at once. In turn, standard connectors (32, 50 and 60 cm) guarantee that the system will fit 100% under every Russian-style water supply system. A wide range of models and size variations will allow you to choose the most suitable product for the interior of any bathroom. In addition, such "ladders" are quite versatile and are actively used not only in apartments and private houses, but also in toilet and shower rooms of public institutions or even industrial premises. These are multi-circuit models that provide maximum heat transfer.

Universal side connection towel rails

Such a heated towel rail will perfectly cope not only with drying towels or linen, but also with maintaining the optimum temperature in the room. Basically, it is recommended to install a heated towel rail with a side connection if the room does not have a lower water supply. Also, such models are in great demand when it is necessary to replace an old-type heated towel rail (for example, “P” or “M” shapes). In this case, such a stylish, functional and reliable heated towel rail as a model from the Rt collection will come in handy. However, it is worth considering the fact that the ideal way to supply "ladders" is still the bottom one. And if your bathroom provides for a bottom connection, we recommend that you pay attention to models with a bottom or universal connection, which are also presented in a large assortment in our catalog.

Dimensions of the side connection of the heated towel rail - 32, 50 and 60 cm along the axes

It is possible to manufacture a heated towel rail with outlets for connecting to the wall (back), the price is as in the table, the production time is 5 - 7 days.

Specifications
A type		Water
Main pipe wall thickness		2.0 mm
Pipe diameter		Ø - 32 mm (1 ') x 2 mm; Ø - 18 mm x 1.5 mm
Material		Stainless steel AISI 304
Surface		Mirror
Polishing		Electro-plasma
Coating		Missing
Test pressure		40 atmospheres
Operating pressure		8 atm. (24.5 max)
Water temperature		110 Cº
Life time		10 years
Manufacturer		Russia, Moscow, OOO Zigzag
Guarantee		5 years

Kit contents
Towel dryer	Mayevsky cranes	Wall mount	The passport

Standard sizes and prices of RT side connection towel rails

Connection axes 32 cm		Connection axes 50 cm		Connection axes 60 cm
	price, rub.	Connection x Width x Height cm	price, rub.	Connection x Width x Height cm	price, rub.
RT 32 x 40 x 50	4560	RT 50 x 40 x 60	4810	RT 60 x 40 x 70	5420
RT 32 x 40 x 60	4810	RT 50 x 40 x 70	5420	RT 60 x 40 x 80	5910
RT 32 x 40 x 70	5420	RT 50 x 40 x 80	5910	RT 60 x 40 x 100	7270
RT 32 x 40 x 80	5910	RT 50 x 40 x 100	7270	RT 60 x 40 x 120	8370
RT 32 x 50 x 50	4920	RT 50 x 50 x 60	5170	RT 60 x 50 x 70	5790
RT 32 x 50 x 60	5170	RT 50 x 50 x 70	5790	RT 60 x 50 x 80	6400
RT 32 x 50 x 70	5790	RT 50 x 50 x 80	6400	RT 60 x 50 x 100	7630
RT 32 x 50 x 80	6400	RT 50 x 50 x 100	7630	RT 60 x 50 x 120	8860
RT 32 x 60 x 50	5420	RT 50 x 60 x 60	5540	RT 60 x 60 x 70	6280
RT 32 x 60 x 60	5540	RT 50 x 60 x 70	6280	RT 60 x 60 x 80	6890
RT 32 x 60 x 70	6280	RT 50 x 60 x 80	6890	RT 60 x 60 x 100	8010
RT 32 x 60 x 80	6890	RT 50 x 60 x 100	8010	RT 60 x 60 x 120	9360