The circulation pump WILO TOP-S 40/10 DM PN6/10 is used for the circulation of water or a water-glycol mixture in heating or air conditioning systems. Also used in underfloor heating systems. It is a reliable and proven pumping equipment. Installed directly on the pipeline, designed for continuous trouble-free operation.
Designation
- TOP-S - standard pump
- 40 - nominal inner diameter
- 10 - nominal head (delivery height), m
- DM - three-phase pump, 3~230/400 V, 50 Hz
Features of the circulation pump WILO TOP-S 40/10 DM PN6/10
- The "wet" rotor provides almost silent operation.
- Three modes of operation corresponding to different degrees of power. You can choose the optimal frequency, thereby optimizing energy costs.
- Cataphoretic coating for protection against corrosion and condensation.
- Supplied with thermal insulation.
- Wide range of temperatures of the pumped liquid - from -20 to +130 C.
Specifications
| Head, m | 10 |
| Consumption, m3/hour | 21 |
| Rated power, W | 350 |
| Power, W | 365 / 465 / 585 |
| Current, A 230/400 | 0,65 / 0,82 / 1,17 / 1,12 / 1,43 / 2,02 |
| Electrical connection | 3~230/400V, 50Hz |
| Electrical protection class | IP44 |
| System pressure (max.), bar | 10 |
| Pressure in front of the pump at t | |
| + 50 °C | 0.05 m. |
| + 95 °C | 5 m. |
| + 110 °C | 11 m. |
| + 130 °C | 24 m |
| Pump installation | horizontal / vertical |
| Pumped medium | pure |
| Fluid temperature | from -20 to + 110 °С |
| short term | from -20 to + 140 °C |
| Connection to the pipeline | flanged |
| Flange inner diameter, mm | 40 |
| Ambient temperature | up to 40°C |
| Mounting length, mm | 250 |
| Weight, kg | 12.5 |
Equipment and functions
Flow characteristics
Design and operational features
- "Wet rotor" - the rotor is located directly in the pumped liquid, which lubricates the pump bearings.
- Applicable materials
- housing - Gray cast iron
- shaft - Stainless steel (X46Cr13)
- impeller - Synthetic material (PPE)
- bearings - Metal graphite - Has built-in overheating protection
- After an emergency shutdown, the pump automatically turns on after cooling
- Pumping of water and water-glycol mixture is allowed (max. 1:1; for glycol content more than 20%, the performance must be checked).
Contents of delivery
- Pump
- thermal insulation
- With seals for threaded connection
- Washers for flange screws (for nominal connection diameters DN 40/DN 65)
- Installation and operating instructions
Accessories (not included in the basic package)
Threaded connections for threaded connection
- Compensators
- For 3~400V pumps:
- Switching plug 3~230 V, 50 Hz (not TOP-S 80/15, TOP-S 80/20)
- Wilo C protection module, 3~400 V
- For 1~230V pumps:
- Disconnect device Wilo SK 602N/SK 622N for complete motor protection
- Wilo C protection module, 1~230 V
This circulation pump is used as part of medium and large heating and air conditioning systems. It is a reliable and proven equipment.
How to buy a circulation pump WILO TOP-S 40/10 DM PN6/10
You can buy a WILO TOP-S 40/10 DM PN6/10 pump by making a purchase directly on the website of the online store, or by calling by phone in the Contacts section. Our manager will contact you and arrange delivery or reserve the goods for pickup.
If you need a drainage pump in Moscow or the Moscow region, we offer delivery around the city and in the nearest suburbs. For buyers from other regions of Russia - delivery of any transport company or postal service as agreed.
Payment for goods is carried out in the following ways:
1. Payment in cash.
When picking up from the store, or upon receipt of the goods by the courier.
2.Bank transfer - payment according to the invoice for payment as for legal, and for physical persons.
When placing an order, select the payment method: "Bank Transfer".
After confirming the order, our specialist will contact you and after agreeing on all organizational issues, you will be sent an invoice by e-mail which you can pay in any bank or through an internet client.
1. Pickup.
Pickup times and times:
PVZ m. Sokol: you can pick up the order the next day after the order from 10 to 18 on weekdays. The order is stored at the point of issue for 3 working days.
Pickup cost:free of charge when ordering from 1,000 rubles. (when ordering less than 1,000 rubles - pickup cost - 80 rubles)
Attention! In the point of issue of orders are only pre-reserved goods!
The employee of the point of issue does not give any advice on the goods!
The route map to the pickup point is located on the page CONTACTS
2. Delivery in Moscow within the Moscow Ring Road
The following items are delivered free of charge:
Kerosene heaters brand "Sengoku" ("Sengoku")
Cost of delivery:
If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!
Time of delivery:
Delivery is carried out on weekdays from 10:00 to 20:00.
Per 30-90 minutes, the courier calls you and agrees on the exact time of arrival.
Exact delivery address (city, street, house number, apartment or office number, intercom code)
The contact person
Contact phone numbers
3. Delivery outside the Moscow Ring Road and further in the Moscow region
Cost of delivery:
If the WEIGHT is not indicated in the product card, you can check it with the manager.
If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!
Time of delivery:
Delivery is carried out within 1-3 working days from 10:00 to 20:00 no reference to noon.
Per 1-2 hours before delivery, the courier will call you and agree on the exact time of arrival.
What is important to specify when ordering:
Exact delivery address ( city, district, locality, street, house number, apartment or office number, intercom code)
The contact person
Contact phone numbers
4. Delivery to the regions of the Russian Federation
We can send you the goods of any of the following companies.
CDEK - www.cdek.ru
First Forwarding Company (PEC) - www.pecom.ru
The estimated cost of delivery of goods can be found on the websites of these companies or contact our specialist.
What is important to specify when ordering:
Passport series and number, date of issue
Full Name
City of receipt
If none of the above methods suits you, we will send the goods to your address in another way - as agreed with you.
The coolant in the heating system must constantly circulate. Its movement is provided by circulation pump, which is indispensable in heating systems with forced circulation. But in addition to the movement of the coolant in the system, the circulation pump can perform an energy-saving function, which is especially relevant in old systems of large diameter pipes.
How does this happen? If you buy a circulation pump and install it in the heating system, then the coolant will move faster and return to the boiler without having time to give up all its heat. Accordingly, significantly less energy is required for reheating, which can result in savings of 20-30%.
Circulation pump prices and types
Circulation pumps are of two types: with a wet and dry rotor. In "wet" pumps, the rotor is separated from the electric motor by sealing rings, and the function of lubricating and cooling the motor is performed by the coolant. Its advantages are:
- noiselessness;
- compactness;
- economy,
- as well as long uninterrupted operation and ease of repair and operation. The disadvantages of "wet" type pumps include low efficiency, which limits their use in domestic heating systems.
In "dry" type pumps, the rotor does not come into contact with the coolant. They are much more powerful than "wet" ones (if the efficiency of "wet" is about 50%, then the efficiency of "dry" is 80%), which determines their use in industry. "Dry" pumps create noise and are demanding on the purity of the coolant.
When choosing a circulation pump, the price plays an important, but still secondary role. In the first place are the features of the heating system of a particular building and the pressure characteristics of the pump itself, which must provide the necessary amount of heat to maintain the required microclimate. The calculation is usually made by heating engineers, who take into account the average outside temperature, the material of the walls, roof and floor, the characteristics ventilation system and other characteristics. The result of the calculation is the indicator of the volumetric supply of the coolant in the heating system.
An important factor when choosing a pump is also its flow rate, or the dependence of the power of the heat source on the difference in water temperatures in the supply and return pipelines. As for manufacturers of pumping equipment, pumps from European manufacturers GRUNDPOS and Wilo have excellent characteristics, also good quality Korean KITURAMI are famous. Among Russian companies, the undoubted leaders are Gileks and Espa, which provide comparative quality at a lower price.
WILO circulation pump for heating and air conditioning systems
0.00 RUB
Delivery
- Delivery in Moscow and the Moscow region is made within 1-2 days from the date of order, by courier or company vehicles. The cost of delivery depends on the destination and urgency, and is specified with the manager. If the delivery coincides with the planned schedule, the delivery is free of charge.
- Delivery to the regions of Russia is carried out by carrier companies (Business Lines, Autotrading or any other company at the request of the customer). Delivery cost in accordance with the carrier's tariffs, delivery to the terminal in Moscow is free.
Circulation pump WILO TOP-S 40/10 EM PN6/10 is designed for circulation of coolant in heating systems, air conditioning systems, closed cooling circuits and industrial circulation systems.
Not requiring Maintenance circulation pump WILO TOP-S 40/10 EM PN6/10 with a wet rotor, with flange connections, manual switching of speed stages.
Equipment and functions
– Manual power adjustment with 3 speed levels
– Pumps with 1-phase electric motor: – P2 up to 90 W: built-in winding protection against overheating;
– Pumps with 3-phase electric motor: – P2 up to 90 W: built-in winding protection against overheating;
– P2 ≥ 180 W: Complete motor protection via winding safety contact in combination with tripping device (option: SK 602N/SK 622N)
– Mains connection 3–230 V with optional switching plug
– Cataphoresis-coated pump housing for optimum corrosion protection
– Combination flange PN 6/PN 10 (for DN 40 – DN 65)
- heat-insulating casings.
materials
Pump body: Gray cast iron (EN-GJL-250)
Impeller: Synthetic material (polypropylene - 50% GF)
Pump shaft: Stainless steel (X46Cr13)
Bearings: Metal graphite
Operating parameters
Pumped liquid: Water 100%
Flow rate MAX: 22.7 m3/h
Head MAX: 10.0 m
Fluid temperature: 20 °C
Min. fluid temperature: -20 °C
Max. fluid temperature: 130 °C
Maximum operating pressure: 10 bar
Minimum support at
50°C/95°C/110°C: 0.5m/5m/11m
Motor and electronics
Electromagnetic compatibility:
Emitted interference: EN 61000-6-3
Interference immunity: EN 61000-6-2
Mains connection: 1~230V/50Hz
Power consumption P1: 0.12 kW … 0.205 kW
Max. speed: 2150 1/min … 2500 1/min
Current consumption: 0.9 A ... 0.99 A
Degree of protection: IP X4D
Threaded entry for cable: 1×13.5
Mounting dimensions
Circulation pump Wilo TOP-S 40/10 DM standard series with flange connection, housing with cataphoretic coating (for corrosion protection), pre-selectable speed levels, indicator lamp for direction of rotation and generalized fault signaling. This pump is used for forced circulation of fluid (water or glycol solution) in heating, air conditioning, cooling, floor heating, as well as hot water supply in private or apartment buildings.
Wilo TOP-S 40/10 DM is equipped with a wet rotor, which means that the motor is constantly flushed with water and cooled at the same time. This design can significantly reduce the noise characteristics of the pump and the mechanical friction of the rotor. The pump can be controlled both in manual and automatic modes. Manual (setting of speed steps) or automatic control (complete motor protection with integrated electronic shutdown system) is provided.
Technical data of the circulation pump Wilo TOP-S 40/10 DM
|
A type
Glandless circulation pump with threaded or flange connection
Application
hot water heating systems, industrial circulation systems, air conditioning systems and closed cooling circuits
Designation
Product features/benefits
- Used in heating and cooling/air conditioning systems from -20 °C to +130 °C (TOP-S 25/13, TOP-S 80/15 and TOP-S 80/20 from -20 °C to +110 °C )
- Pump housing with cataphoretic coating (KTL) for protection against corrosion due to condensation.
- Manual power adjustment with
3 speed steps - The pump is easy to install thanks to the combination flange PN 6/PN 10 (for DN 40 - DN 65)
Specifications
- Permissible temperature range -20 °C to +130 °C,
short-term (2 h) up to +140 °C (TOP-S 25/13, 80/15, 80/20 and pumps with Wilo protection module: -20 °C to +110 °C) - Network connection:
- 1~230V, 50Hz (depending on type)
- 3~230 V, 50 Hz (optional with switch plug)
- 3~400V, 50Hz
- Protection class IP X4D
- Threaded or flanged connection (depending on type) Rp 1 to DN 100
- Max. operating pressure with standard version: 6/10 bar or 6 bar (special version: 10 bar or 16 bar)
Equipment/functions
Operating modes
- Switching speed stages
Manual control
- Speed setting: 3 speed steps (2 speed steps for single-phase pumps with P 2 ≥ 350 W)
Automatic control
- Full motor protection with integrated electronic shutdown system (standard equipment only for three-phase pumps with P 2 ≥ 180 W and single-phase pumps P 2 ≥ 350 W, optionally for all types with Wilo?C protection module)
External management
- Control input "Off" priority" (optional for all types with Wilo?C protection module)
Signaling and indication
- Separate/collective fault signaling (floating NC contact) (optional for all types with Wilo?C protection module)
- Collective fault signaling (floating NC contact) (standard equipment only for 3~pumps with P 2 ≥ 180 W and 1~ pumps with P 2 ≥ 350 W, optionally for all types with Wilo-C protection module)
- Separate operation signaling (potential-free NO contact) (optional for all types with Wilo?C protection module)
- Protective winding contact (SCD, potential-free break contact) only for single-phase pumps with P 2 = 180 W)
- Fault indicator light (standard equipment only for three-phase pumps with P 2 ≥ 180 W and for single-phase pumps with P 2 ≥ 350 W, as an option for all types with Wilo-C protection module)
- Direction of rotation indicator lamp (only for three-phase pumps)
Dual pump control (double pump or two single pumps)
- Main/standby operating mode (automatic pump changeover on fault/timer): as an option for all pump types with Wilo-C protection module
Equipment
- For flanged pumps: Flange versions
- Standard version for pumps DN 40 - DN 65: combination flange PN 6/10 (flange PN 16 according to EN 1092-2) for counter flanges PN 6 and PN 16,
- Standard version for DN 80/DN 100 pumps: flange PN 6 (designed PN 16 according to EN 1092-2) for counter flange PN 6,
- Special version for pumps DN 40 - DN 100: flange PN 16 (according to EN 1092-2) for counter flange PN 16,
- Cable entry possible on both sides (only for single-phase and three-phase pumps with P 2 ?180 W)
- Serial equipment of pumps used in heating systems with thermal insulation.
materials
- Pump housing: Gray cast iron
- Impeller: Synthetic material
- Shaft: Stainless steel
- Bearings: metal graphite
Scope of delivery
- Pump
- thermal insulation
- With seals for threaded connection
- Washers for flange screws (for nominal connection diameters DN 40 ÷ DN 65)
- Installation and operating instructions
Options
- Special version for operating pressure PN 16 (for a fee)
- Version for special voltages on request.
Accessories
- Threaded connections for threaded connection
- Compensators
- For 3~400V pumps:
- Switching plug 3~230 V, 50 Hz (not TOP-S 80/15, TOP-S 80/20)
- Wilo C protection module, 3~400 V
- For 1~230V pumps:
- Disconnect device Wilo SK 602N/SK 622N for complete motor protection
- Wilo C protection module, 1~230 V
