Magicar 5 alarm operating instructions. Scher-Khan Magicar V - operating instructions

Today, anti-theft systems are very popular among owners of various vehicles. Thanks to the latest developments, highly intelligent car alarms prove their effectiveness. Their installation makes driving safe and comfortable.

What are the main features of the presented system are very popular today, experts' reviews will help to understand. Having studied the instructions from the manufacturer, as well as the recommendations of experts, you can be sure of the safety of your car.

Main characteristics

Auto which in without fail studied by the user before starting work, is a popular anti-theft system. It is known for its versatility and reliability. The alarm software is compatible with almost all transmissions that are installed in modern vehicles.

Experts say that this is one of the most reliable and efficient systems that are on the auto market today. "Sherkhan Magikar 5" was created on the basis of a vehicle. Information about its status is displayed on the LCD key fob display. A clear interface, ease of setup allows the user to fully control the state of their car systems.

Alarm "Sherkhan Magikar 5", instruction which will allow you to use existing functions fully, has a whole list of built-in programs. They improve the safety of the car, the driver and all participants. traffic. Some programs increase the comfort of using the vehicle. The first of these is the autorun function. However, this is far from the only program that improves driver comfort.

Each vehicle owner can choose a specific set of commands for himself. To do this, it is important to carefully study the instructions, as well as the advice of specialists. This will highlight the most appropriate list of system functions.

Peculiarities

Wiring diagram "Sherkhan Magikar 5" presented in the manufacturer's manual, which is supplied with the device. She is quite complex. The alarm involves installation in the engine compartment of the car. In order for all systems to work correctly, it is better to entrust this work to a specialist. Only in this case, you can be sure that the software will work without failures. Special companies give a guarantee for the installation of car alarm components.

"Sherkhan Magikar 5" is compatible with gasoline or diesel engines. Its versatility allows installation on almost all modern machines. The limitation set by the manufacturer applies exclusively to the voltage in the wiring. It should be 12 V. This ensures stable operation of all system components.

A computer installed in the car collects signals from sensors. They are mounted in the main systems of the car. After processing the received data, the on-board computer transmits information to the key fob of its owner. The remote control has a liquid crystal display.

This allows the driver to understand what state the systems of his car are currently in. If necessary, he gives commands to the software at a distance. The signal range in open areas is about 1.5 km. The car should be parked in an open area. Houses, tree branches and other obstacles can delay the signal and reduce its range. The driver must see his car.

Expert reviews

Signaling "Sherkhan Magikar 5" has a lot of advantages. High manufacturability, ease of operation make it in demand. Experts say that when correct installation this system has a high level of reliability. All of its sensors have a special protection class. The antenna and processor are also completely closed from unauthorized entry inside software. If desired, the installation of the system can be done independently. However, experts argue that this increases the likelihood of a user making a mistake. This compromises the reliability of the equipment.

A loud siren is installed in the engine department. It has virtually no failures. All components of the system were manufactured using the latest scientific developments. Due to the unique standards that were used in the development and creation of the alarm system, Sherkhan Magikar 5 is considered one of the most high-tech, intelligent security systems. During the manufacturing process of all components, testing is carried out at all stages of production. This ensures high reliability of the system.

"Sherkhan Magikar 5", price which is about 5-6 thousand rubles, belongs to the middle segment of security products. This product is available to almost everyone. Separately, you can purchase a keychain with an LCD display for 1.2-1.4 thousand rubles. Removable covers are also sold separately. Their cost is about 300 rubles. They help protect the remote control from scratches. The availability of additional elements of the presented alarm system allows each car owner, if necessary, to update his security system.

Beginning of work

Alarm "Sherkhan Magikar 5", installation and the operation of which must be carried out exactly according to the recommendations of the manufacturer, is considered a simple, understandable system. Before starting work, you must carefully study all the provisions of the instructions. Experts recommend immediately highlighting those functions that will be used by the driver. This will simplify the process of remembering and managing the device. After completing this task, you can start working with the security system.

First of all, you need to insert the battery into the remote control. It comes with a keychain. After installation, you can turn on the remote control. It has 4 buttons and a display. The set of functions includes a vibrating alert, automatic backlight. The screen displays information about the state of charge of the battery and the temperature in the passenger compartment of the car.

By pressing certain combinations of the available 4 buttons, you can set various commands to the control unit. Signal transmission encoding is highly reliable. She is unique. Any other remote control, even from a similar system, will not be able to control the car alarm.

The key fob must be linked to the system. The package may also include additional key fobs. They also need to be registered in the program memory. Moreover, this procedure is performed simultaneously for all remotes. You can overwrite if necessary.

Arming

Alarm setting "Sherkhan Magikar 5" carried out in accordance with established rules. First of all, experts recommend mastering the security mode. To do this, you need to turn on the alarm. All vehicle doors must be well locked. Glass should be raised to the stop. The driver must check that the trunk and hood are closed.

If all the doors and windows in the car are tightly closed, the user presses the first button on his main key fob. The locks should be locked at this point. It also disables the starter. Keychain alarm "Sherkhan Magikar 5" it will emit a special signal. The siren will also produce the sound provided by the program. The machine must turn the headlights on and off 5 times.

The interior indicator will light up. If it flickers with a certain frequency, this indicates the successful activation of the security mode. The frequency of the LED light signal should be once per minute.

If the driver did not close the doors tightly, did not fully raise the windows or open the trunk, the key fob will beep 3 times. The siren will also emit 3 beeps. This needs to be monitored closely. If the indicator does not light up, then it is necessary to check the operation of the system. This will help you avoid trouble in the future.

PIN code programming

Understanding the issue how to set up "Sherkhan Magikar 5", you must also consider the procedure for setting a special password for the system. It may be required if, due to certain circumstances, the driver cannot disarm the alarm. The on-board computer may in some cases not respond to the key fob signals.

The driver sets the password himself. It can be two or four digits long. Each code element can be set from one to four. To program a password, the vehicle owner must follow a specific procedure.

First, the security mode is disabled. Next, the driver must open the car and insert the key into the ignition socket. It is turned to the ON position. The motor remains off. On the remote control, you must simultaneously hold down the second and fourth buttons. The siren will sound once and the headlights will turn on and off.

You should press any button on the key fob. This procedure must be done within 4 seconds. The button number specifies the first digit of the code. After that, an identical number of signals will sound. The remaining digits of the password are set in the same way. After completing the procedure, the system will exit the setup mode. The siren will sound twice, the headlights will flash twice.

Disarming

Alarm "Sherkhan Magikar 5", instruction which considers in detail all cases of disarming, in rare cases it is not turned off in the standard way (for example, a key fob is lost). In this case, you must enter the previously set password.

We need to open the car. The siren will sound an alarm. Three times the key is turned in the ignition from the OFF position to the ON position. The siren will stop. Within 4 seconds, the key must be turned the number of times corresponding to the first digit of the code. The headlights will turn on and off once. Then the remaining digits of the password are entered.

The block will be removed. If the password is entered incorrectly, the alarm will turn on again. Therefore, the password to the system should be remembered accurately.

Autostart security system

A few more settings to learn alarm "Sherkhan Magikar 5". How to set up autoplay? The manufacturer's recommendations will help. This is a convenient program that allows you to increase the comfort of driving.

To enable it, the driver must close all the doors of the car and turn on the security mode. Next, you need to activate the autorun function on the key fob. It will turn on the security mode on its own. This feature improves system reliability. If the driver forgets to turn on the security mode, when the autostart is on, the alarm will block the car after 30 seconds.

Information about the inclusion of autorun is displayed. The screen should show the word PASSIVE. Every 10 seconds, the system transmits data on the state of the armed mode to the display.

Auto engine start

Autorun "Sherkhana Magikar 5" produced in time. It is possible to set the engine start period by temperature or battery voltage. However, these functions are secondary. They cannot be started without programming an auto start time.

To enable the mode, you must turn off the security mode, ignition, open the door. The engine can be started every two, four or eight hours. At the same time, the first and second buttons of the key fob are clamped. Next, you need to press the fourth button 13 times. The siren beeps every time. If you press the second button, the engine will automatically turn on every 8 hours. The third button sets the frequency once every four hours, and the fourth - once every two hours.

Auto start by battery temperature and voltage

Has additional features alarm "Sherkhan Magikar 5". How to set up autoplay motor temperature and on-board voltage, we will tell you now. To do this, follow a sequential procedure.

You need to enter the program mode by pressing the first and second buttons. To set the auto start function by temperature, you need to press the fourth button 21 times. The siren will make an appropriate sound each time. If you press the second button on the remote control, the motor will start at an interior temperature of -15 ºС. The third button corresponds to the level -25 ºС, and the fourth one -60 ºС. Next, the timer is turned on (press buttons two and four).

In some cases, the driver wants to turn on auto start to limit the start of the engine when the voltage in the on-board network drops. To do this, as before, enter the programming mode and press the fourth button 20 times. To activate the timed engine start restriction mode, press the second button on the key fob.

Certain management features are different alarm "Sherkhan Magikar 5". How to set up autoplay turn on the security mode and other functions, you now know. In this case, the reliability of the system will be high.

MANUAL

PURPOSE OF THE BUTTONS OF THE KEY FOB-COMMUNICATOR

Example notation:

I - quick (0.5 sec.) button press

I– – long (2 sec.) button press

(I+II) - fast (0.5 sec.) simultaneous pressing of the buttons

(I + II) - - long (2 sec.) simultaneous pressing of the buttons

Number

buttons

Time

pressing

Function (mode)

Enable security mode

Stop alarm mode

Enable starter/ignition interlock

close locks

Disarm

Stop alarm mode

Disable starter/ignition interlock

open locks

Enable/disable the "Free

Turn on/off display backlight

Checking System Status

open trunk

PANIC or JackStop™ modes. For

stop press button I or II

Enable/disable siren signals

Additional management channel 1

Shock sensor enable/disable

Additional management channel 2

Enable/disable timed start

TURBO mode enable/disable

Enter programming menu 1

SCHER-KHAN MAGICAR 5

1) Factory value. Two step disarming is disabled. For
disarming, just press the button "II" of the key fob
2) Confirmation of disarming is required. If using the code
PIN1 disabled (programmable function 1-6 in factory setting),

it is necessary to press the button "II" of the key fob again. If used

four- or two-digit PIN1 code (programmable function 1-6

has the value II or III), it is necessary after pressing the button "II" of the key fob

sequentially press four (or two) buttons on the key fob with numbers,

the corresponding digits of the PIN1 code. Only after correct

the second step, the system will be disarmed. If the code is not

entered within 15 seconds or an incorrect code is entered, the system will go

into a state of alarm

Programmable function 1-20: "Auto start
battery voltage"

to perform an automatic start timer.

This programmable function has two meanings:

1) Factory value. Automatic voltage start
battery is not used
2)
the battery voltage does not drop below 11.5 V, or

the temperature condition assigned to the programmable

function 1-21

Programmable function 1-21: "Auto start
temperature threshold"

This function allows you to enable or disable the corresponding condition

to perform an automatic timer start, and select

temperature threshold.

This programmable function has four meanings:

1) Factory value. Automatic threshold trigger
temperature value is not used
2) The next timed start will be delayed until
the temperature will not drop below -15

C or battery voltage is not

Scher-Khan Magicar V - one of the past generations of the popular alarm system, combining security, control and boost performance characteristics car features. Scher-Khan Magicar V is one of those types of car alarms that have feedback using a remote control.

The Scher-Khan Magicar V alarm is controlled remotely using a key fob with a display located on it. The key fob allows you to remotely control the alarm functions using several keys on the key fob (I, II, III, IV), various combinations of buttons and the length of pressing - short presses (0.5 sec) and long presses (2 sec).

Setting the time on the key fob

Setting the exact time on the key fob display is a necessary procedure in order to be able to start the car engine on a timer in automatic mode. Since the exact time is reset when the power is turned off, the setting is carried out not only before starting operation, but also when replacing the battery.

Setting the exact time on the key fob consists of several steps.

1. It is required to press a combination of buttons II and III. The duration of pressing is 2 seconds. After that, the programming mode is entered, about which the owner is notified by a sound signal from the key fob, a flashing alarm and a special symbol on the display.
2. Next, press the I button and hold it for 0.5 seconds. Thus, the mode of setting the exact time is activated, confirmed by a sound signal. The display of the device shows the current time flashing.
3. Next, the exact time is set. With button I you can change the hour, with button II you can change the minutes. To change by one step, you must hold the desired key for 0.5 seconds.
4. The last stage is the exit from the programming mode, which is carried out by pressing the combination of keys II and III. Exit from the mode is confirmed by a sound signal.

Reset to factory settings

Errors in self-programming of alarm functions may require a rollback to the factory settings. Resetting the programmable alarm functions to factory values ​​is carried out in 2 stages.

1. At the first stage, you should enter the programming mode - press buttons II and III simultaneously and hold them for 2 seconds.
2. At the second step, you need to press button III on the key fob three times (0.5 seconds each). Each press is accompanied by a flashing "emergency gang" and a sound signal. After a short period of time, 3 beeps should sound, it will also flash three times. alarm. Thus, the owner is notified about the reset of the function programming settings to the “default” settings.

Engine starting

The Scher-Khan Magicar V alarm allows you to start the car engine using the remote control. To do this, press button II of the keyfob and hold it for 2 seconds (long press). In this mode, the alarm goes into armed mode, the car doors are locked, and the engine starts. The duration of the motor can be programmed for different time periods:

• 5 minutes;
• 15 minutes;
• 25 minutes;
• 45 minutes.

The engine start is accompanied by several indicators confirming the successful execution of the request:

• siren signal
• key fob sound signal;;
• flashing "emergency gang";
• 5-fold headlights on the key fob display

If the engine start fails, the system will retry a maximum of 2 more times. If after them the engine start is not possible, then the alarm goes into normal mode.

In order to start the movement of the car, the driver, with the engine running from the key fob, needs to open the doors, insert the ignition key and turn it to the ON position. To do this, the driver has 20 seconds after opening the doors. If during this period the key is not turned to the desired position, the system will automatically turn off the engine.

The alarm may not start the engine for several reasons:

• the motor is already running;
• the ignition is already on;
• the doors or trunk are open;
• the reservation mode for vehicles with manual transmission has not been performed (the control lever has not been moved to the neutral position).

Therefore, in order to automatically start the engine, the driver of a car with a manual transmission must first, after stopping:

• set the gearbox lever to the "Neutral" position without turning off the engine;
• close the hood and trunk;
• press button II on the key fob;
• turn the ignition key to the off position and pull it out (the engine will continue to work);
• get out and slam the door (the engine will stall).

Autostart Programming

The Scher-Khan Magicar V alarm system allows automatic engine start in various modes:

• every 2 hours;
• every 24 hours.

Starting the engine every 24 hours allows you to start the engine at the same time every day, which is convenient, for example, for warming up in the morning. Starting every 2 hours allows you to maintain the temperature of the engine and interior on cold days or, conversely, to cool the interior in the summer season. Both timer modes cannot be used at the same time. The choice of the autostart mode is made through the menu of programmable functions.

To program the autostart every 2 hours, briefly press the buttons II and IV. In this case, the engine will automatically start 2 hours after pressing. Setting the time is not required in this case.

To automatically start the engine every 24 hours, you must first set the exact time on the key fob, if it is not set. (how to do this - see above). The automatic start of the motor is set as follows:

• you need to press buttons II and IV and turn off the Timer mark;
• select start time using keys I and II;
• press the II and IV keys again and turn off the Timer label.

At automatic start engine, the key fob display shows a countdown until the moment when the engine is turned off.

Auto start by temperature

Automatic start can be set when a certain air temperature is reached, which is determined by temperature sensors installed in the car. Temperature autostart can only be used in combination with timer autostart. To set autostart only when a certain temperature is reached, you must:

• select auto start by timer;
• turn on temperature control - press the IV button 21 times;
• choose the required temperature regime(key II - -15 °C, key III - -25 °C, button IV - +60 °C);
• turn on the autorun mode by timer (see above).

How to register a keychain?

The Scher-Khan Magicar V alarm can "remember" 3 different key fobs. To synchronize a new key fob with an alarm, you must:

• turn the ignition key three times from the OFF position to the ON position - the emergency flasher should flash 1 time, confirming the entry into the programming mode;
• no later than 4 seconds after the flash, you need to press the I key on the new key fob;
• then you need to enter the key fob code into the memory of the signaling processor unit.

The memory of the processor unit can store data of only 3 key fobs, so when the fourth key fob is registered, the code of the first one is deleted from the memory.

You can exit the programming mode without taking any action within 4 seconds after writing the last digit of the code.

How to turn off the alarm?

To disable the security functions of the alarm system, a special VALET mode is provided. The deactivation function is necessary, for example, when transferring the car to the station after-sales service to prevent an alarm. To switch to the VALET mode, a short press of the I and III keys is enough. You can also turn on the mode with the ignition key - just like when registering a new key fob, you need to turn the key in the cell from the OFF position to the ON position three times, that is, enter the programming mode. Further, no action should be taken for 4 seconds, after which the system will automatically switch to VALET mode.

In VALET mode, the door opening/closing function is stored, for which you need to briefly press the I button. You can exit the VALET mode by pressing the combination of keys I and III.

Shock sensor adjustment

The shock sensor notifies the owner of the car about an incident with the car while the car is parked with the alarm on.

Scher-Khan Magicar V alarm sensors are two-level: with a weak impact, a 4-time beep sounds and an alarm flashes 4 times. With a strong impact, the key fob goes into alarm mode, lasting 30 seconds - 30 flashes of the "emergency gang" and 30 short beeps. Shock sensors can be turned on or off by pressing the combination of buttons I and III and holding them for 2 seconds.

Adjusting the shock sensor helps to avoid false alarms from the accident warning sensor, since with a sensitive sensor, even the passage of a neighboring car can be falsely perceived by the system as an emergency impact. To adjust the sensitivity of the sensors, physical access to them is required; you can find out about the location of the shock sensors at a service station. Regulators are installed on the sensors themselves, turning clockwise increases sensitivity, counterclockwise - reduces until the sensor is completely turned off.

Of everything model range alarms with autorun Scher-Khan the most unfortunate is definitely Magicar 5. This is connected not only and not only with the hacking vulnerability common to all Scher-Khan systems of these years, but also with the extremely illogical implementation of autorun. Even the classic and most convenient “software neutral” for raising the handbrake cannot be physically implemented here, there is no input for the handbrake.

In the same way, the most accurate analog method for monitoring engine operation using a tachometric signal is not provided. Therefore, the best recommendation for owners of such systems would be to replace them with more modern ones that work adequately with autorun and persistent co.

Nevertheless, many motorists continue to use previously installed (usually in car dealerships) Magicar 5, and during operation, questions inevitably arise - from how to set up the Sherkhan Magicar 5 key fob to how to disable autorun on Magicar 5 (by the way, the correct reading is “magicar”).

An auto electrician-diagnostician, a certified StarLine specialist, works on the site. If you have questions about car alarms, ask them at the end of the article in the comments or Vkontakte. When contacting, indicate the make of the car and the model of the alarm.

Keyfob programming

Although “falling off” key fobs are mainly the prerogative of the Logicar line, where the need for regular re-registration has become a byword for a long time, there is a possibility of loss of recognition here. It is not difficult to register the Sherkhan 5 keychain, it is enough to remember a simple procedure.

First of all, you need to remember that the entire set must be rewritten: at the beginning of the procedure, the memory of all previously stored key fobs is erased. If a problem arose on the road, when you only have one key fob with you, you should repeat the procedure upon returning home, but with complete set- otherwise, if the main key fob breaks, you will have to open the car with emergency disarming of the system. On all prescribed remote controls with an LCD screen, you need to turn off the “Hands Free” function (holding button 1 for two seconds), and the system is disarmed.

Key fob programming is performed in three stages:

1. Quickly turn the ignition on and off three times, then light signaling should give one flash.
2. Switch on the ignition again, leaving it in this state.
3. With a pause of no more than 4 seconds, alternately press buttons 1 on all prescribed remote controls (no more than three).

Exit from the keyfob assignment mode will occur automatically 4 seconds after the last press.

Re-prescribing- one of the most effective measures in case the Magikar 5 key fob does not work. Only after making sure that there is no physical connection (that is, the key fob cannot be registered), you need to look for a problem in the system or change the key fob.

Time setting, autostart by time

timer start (A);
turbo timer mode (B);
passive activation of the system (C);
automatic activation mode without pressing the buttons (D);
included siren (E);
shock detection sensor (F) is off;
vibrating alert is active in the key fob (G);
control of door locks after starting the ignition (H);
open trunk lid (J);
the engine is switched on in the autostart mode (K);
system state (L);
open doors (M);
field for displaying hours, temperature and data during autorun (N);
operating mode Valet (O);
working alarm or dimensions not switched off (P);
shock sensor triggering (Q);
key fob battery indicator (R);
signal level (S).

Since the alarm has a timer autostart mode, when the car starts every day at a specified time, for its operation it is necessary to correctly set the time on the main key fob. The procedure for setting the time on the Sherkhan Magikar 5 alarm key fob:

1. Hold down buttons 2 and 3 for 2 seconds. The display will change to something that looks like "Pro9" (actually it should be Prog, but due to the limitations of the seven-segment screen elements, it looks like this).

2. Briefly press button 1 - the current time will start flashing, the key fob will give a single signal.

3. Press button 2 to set the hours, use button 3 to enter the minutes.

Autorun by time(naturally, all the necessary connections and settings of the system itself must be made in advance) is possible in two versions. Either the car starts every day at the set time (for which the clock is set), or it happens every 2, 4, 8 hours from the moment the mode is activated and regardless of the clock setting. The type of timer autorun is set in the system settings, that is, several options cannot be activated at the same time.

To enable autorun by timer for 24 hours, you need:

1. Hold down buttons 2 and 3 for 2 seconds.

2. After the inscription “Pro9” appears, briefly press button 2 (not 1, as for setting the current time. The indications of the previously set autorun time will start blinking.

3. Use button 1 to set hours, button 2 to set minutes.

5. Press buttons 2 and 4 to turn on the TIMER indicator on the screen.

If you need to change the autorun time when the timer is already activated, you must first turn it off (similarly, by pressing 2 + 4), set the timer time, then turn it back on.

If the alarm settings are set to run periodically, just press the 2+4 buttons to turn on and off. After activating the intermittent start mode for the first time, the engine will start after 2, 4 or 8 hours, depending on the settings of the central unit.

Video: SCHER-KHAN MAGICAR 5

Auto start by temperature and voltage

Since Sherkhan Magikar 5 (in the generally accepted meaning) does not allow autostart by temperature, it is only possible to limit the periodic start. In other words, the car will try to start every 2, 4, 8 hours if the following conditions are met:

• the temperature at the installation point of the central unit is lower than the specified threshold;
• the battery voltage is lower than the set threshold.

You can set one of these conditions, or two at the same time. Their programming is described below.

Alarm settings

To change the system settings, any of the previously registered key fobs is used. The car must be disarmed, ignition off.

The system has two separate settings menus. The entrance to the first menu is performed by pressing and holding the buttons 1 + 2, the second - 1 + 4. After the sound signal, you need to select the function number by pressing button 4 and make a short pause, after which the machine will give the number of the selected function by siren signals. With buttons 1,2,3 and 4, you can then set the desired value of the function.

In menu 1 The following functions are associated with the work of autorun:

• 12: Engine warm-up time at auto start, 5,15,25 or 45 minutes for settings 1 to 4 respectively.
• 13: timer start type. In value 1, the launch occurs every 24 hours according to the time set on the key fob, in values ​​2.3 and 4 - every 8.4 or 2 hours from the moment of activation.
• 14: Limit the number of autostarts, maximum 5, 7, 16. When set to 4, the number of starts on the timer is not limited.
• 16: autorun reservation type. In option 1, the ignition interception occurs every time the ignition is turned off, but with a noticeable pause during which the engine may stall. Option 2 introduces an additional condition: the doors must be closed. If you do not need autostart reservation at a particular moment, it is enough to first open the door and then turn off the ignition. There is also a delay before the ignition is intercepted. Therefore, the only adequately working backup option on the Magicar 5 is manual backup (function value 3), when you need to press and hold button 2 of the key fob before turning off the ignition.
• 17: a way to complete the "software neutral" algorithm. In option 1, the car will stall after closing the door without arming, in option 2 it will be similar, but with auto-arming. In option 3, the engine will stall only after manual arming. This is the only way to use.
• 20: Limit periodic triggers based on battery voltage. In option 1 it is not set, option 2 sets the threshold to 11.5 V - until the voltage drops below, the start will be blocked. If you choose to run every 24 hours, the setting is ignored.
• 21: auto start temperature threshold. In option 1 it is not installed, in options 2-4 the temperature is set to -15, -25 and 60 degrees, respectively (the last option is for the air conditioner to work in the heat).

Menu 2 autorun needs settings:

• 12: minimum starter rotation time, 0.6, 0.8, 1.2 or 2 seconds. It should be set to the minimum possible, since there is no automatic cut-off of the starter, as on alarms with a tachometric input.
• 13: maximum starter rotation time, 2, 4, 8, 10 sec. It should also be as low as possible to save the resource of the starter and the flywheel ring gear.
• 14: increase in starter rotation time on subsequent attempts to start after an unsuccessful one. In option 1, each new start attempt lasts 0.2 s longer than the previous one, in option 2 - by 0.4 s. Option 3 sets the fixed scroll time given by function 12.
• 15: pause between ignition on and start attempt, 2, 4, 8 and 10 seconds. The first two options are relevant for gasoline engines, options 3 and 4 are for diesel engines with glow plugs.
• 16: pause after stopping the engine until the ignition is turned off. 0, 4, 15 seconds or 4 with restart attempts.

The remaining autorun settings are related to the connection scheme for a particular car and should not be changed by the user.

Programming the CTCTS functions using a key fob consists of four steps.

1. Enter programming mode and select the programming menu. To enter Menu No. 1, press the I + II buttons simultaneously for 2 seconds. To enter Menu No. 2, press the I + IV buttons simultaneously for 2 seconds. The siren will sound one short beep and the vehicle alarm will flash once, confirming the successful completion of STEP 1.

2. Press the IV button to select the Menu function you want to change. The number of presses must correspond to the number of the selected function. For example, to select function 4, you need to briefly press the keyfob button IV four times. Each button press will be confirmed by a short siren sound (if enabled) and a flash of the car alarm.

3. Wait a few seconds. The system will confirm the number of the selected function to be changed with short siren beeps and car alarm flashes. The number of signals will correspond to the number of the selected function.

Note:

If, when choosing a function, you made a mistake with the number of clicks and (or) there are no siren and alarm signals, then you must repeat all the steps starting from STEP 1.

4. Press the I button to select the factory setting for the function. To confirm this, the siren will give one short signal, the alarm will flash once. Press the II, III, or IV button to select optional function values. To confirm this, the siren will give two, three or four short beeps, the car alarm will flash two, three or four times.

Note:

If you hear one long signal from the car alarm siren, this means that the system has exited the function programming mode. To continue programming, repeat all steps from STEP 1.

ATTENTION!

If you want to change more than one function from the Menu you have selected, then the selection of each function to change must begin with STEP I.

Menu of programmable functions

Menu #1 [Button (I + II)-]

			[Button (II)]	[Button (W)]
	Delay before the starter rotates after the ignition is turned on. Should be increased for a diesel vehicle.
	Open door warning
	The duration of the control pulse of the central lock. Should be increased for pneumatic central locking system
	Panic mode or JackStop ™ (robbery protection)	"Panic" (Starter lockout)	JackStop™ (Ignition Interlock)
	Control central lock on and off the ignition	Turned off	Included
	Launch reservation method. (Only for manual transmission)	Automatically, every time the ignition is turned off	Automatically, whenever the ignition is turned off, but provided that the doors are closed	Only manual mode, before switching off the ignition for reservation, it is necessary to press button II for 2 seconds.
	Starter rotation time	Standard	Standard + Minimum	Standard + maximum

Note on function 1-4: This function allows you to select "Panic" or Jack Stop mode™ (robbery protection):

.
	IV button for 2 sec.	IV button for 2 sec.
	Siren sounds 1.5 min.	Siren sounds 1.5 min.
Engine lock type	Starter lock	Ignition lock (lock is disabled during automatic start)
Starter lock	Turns on immediately	Not used
Ignition lock	Not used	Turns on immediately if the ignition is off. Turns on after 30 sec. after 2 sec. pressing the IV button if the ignition is on

Resetting all programmable functions of Menu No. 1 to factory defaults

1. Enter programming mode. Press buttons I + II simultaneously for 2 sec. The car alarm siren will sound one short beep and the alarm will flash once, confirming the success of STEP 1

2. Briefly press button III on the car alarm key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time after this, three siren sounds will sound, the alarm will flash three times, confirming the factory settings of all programmable menu #1 functions.

Menu #2 [Button (I+IV)-]

		[Button (I)] Factory setting	[Button (II)]	[Button (III)]	[Button (IV)]
	Timer start operation mode	24 hours (start time is user selectable)	2 hours (periodically to warm up the engine)
	Engine warm-up time
	Pulse time for add. channel 1

Resetting all programmable functions of Menu No. 2 to factory defaults

To reset the programmable features to factory defaults, two steps are required.

1. Enter programming mode. Press buttons I + IV simultaneously for 2 sec. The car alarm siren will beep once, the alarm will flash once, confirming the success of STEP 1

2. Briefly press button III on the key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time, three siren sounds will sound, the car alarm will flash three times, confirming the factory settings of all programmable car alarm functions menu No. 2

KEYFOB-COMMUNICATOR CAR ALARM SCHER - KHAN 5

Preparing the key fob-communicator for work

Before using the key fob, you must bring it into working condition, because. during transportation and storage, an insulating gasket is installed between the contact of the battery and the contact plate of the key fob, which prevents the battery from discharging before operation. Before using the key fob, remove it. To do this, release the battery cover lock, press the cover and slide it in the direction opposite to the antenna. Remove the battery. Remove the insulating pad between the battery and the collector plate. Install the battery back, observing the polarity indicated on the bottom of the battery compartment. If there is no indication of the polarity of the battery, then it is set with a negative terminal towards the antenna. Close the battery cover. After that, the keychain is ready to work.

Symbols on the display of the key fob-communicator of the car security system

	Timer start indicator
	TURBO mode indicator
	Passive arming indicator
	"Hands free" mode activation indicator
	Siren indicator
	Shock sensor off indicator
	Power indicator vibration call
	Indicator of turning on the automatic control of the central lock by ignition
	Door open indicator
	Trunk/hood open indicator
	Shock sensor alarm indicator (optional sensor)
	Car owner call indicator