Purity of soul and peace of mind - that's what any self-respecting person needs! For most of us, it is these concepts that are the goal to which we, without noticing it and without guessing, ourselves strive. As the proverb says, a healthy mind in a healthy body! The same can be said about purity: a clean body is a clean soul. Here, in order to achieve the purity of the soul, first of all it is necessary to achieve the purity of our body. And this is easy to achieve: just come after work and plunge into hot bath. At the moment - there is nothing easier, but such a pleasure! In addition, every person sometimes needs the smallest thing - to be with himself, relax and think about the past day and future plans, and, at the same time, no one bothers him. And where do you think this can be achieved? Exactly! In bathroom! Here, to achieve the above, the equipment and decoration of this very room plays a significant role.
In modern conditions, the so-called acrylic bathtubs have received a significant variety. From this material you can get baths of any color and shape, it all depends solely on your imagination.
You can make a choice of a bath for every taste, completely corresponding to your desires. It is these requirements that meet the bas bathtubs made of acrylic, which we offer you.
Bathtubs bas have their advantages, namely:
- the material cools down for a long time;
- baths of this type do not lose color and do not deteriorate, they will serve for a long time;
- high guaranteed service life (from two to ten years);
- in case of damage, the baths are easily restored with a grout intended for this;
- they are easy to install, operate and maintain;
- confirmed by the corresponding certificate.
Here, in order to achieve all the above requirements, we advise you to use BAS (Bath Acril Systems) bathtubs and curtains for them. Acrylic and massage bathtubs with curtains will please any whimsical client.
Acrylic bas bathtubs are made in several stages:
- 1) an acrylic sheet is heated to a temperature of 130-160°C;
- 2) a trough of the desired shape is formed;
- 3) this trough is cooled;
- 4) the received form is fixed in the right place;
- 5) the outer edge of the tub is covered epoxy resin with fiberglass in several layers (this gives rigidity and strength).
But, if the shape of the bath is too complex, then its strength will be much lower, because. plasticity of acrylic has certain limits. Therefore, you need to make a choice between the beauty of performance and reliability. If high-quality sanitary acrylic is used in the manufacture of the bathtub, then your bathtub will not be subject to corrosion, chemical and other types of influences. Hydromassage jets can be inserted into the bas acrylic bathtub. A variety of settings according to your order can provide a variety of massage modes (from pulsating to oriental). If you have an ordinary acrylic bath, then after a while you can build a hydromassage system into it, for which you only need to buy this system and call the appropriate specialist.
Consider the maintenance of our baths. Unlike cast iron or steel bath, acrylic care is even easier. The only drawback is that the tub is not suitable for soaking laundry. Sanitary acrylic is non-porous, so it is not susceptible to contamination. For care, it is enough to wipe the bath with a soft sponge with a cleaning agent (you can use liquid soap and etc. detergents). But abrasive substances and solvents are strictly prohibited. Whirlpool tubs should be disinfected and cleaned of scale deposits annually (but not more frequently). This is done with a disinfectant or vinegar (1.5 l) added to a bath filled with water. Then we switch on for 10 minutes, drain, fill the bath, and turn it on again for 1-2 minutes. Then we wash the bath from the shower.
No matter how durable the material is, but, unfortunately, it can crack and scratch. But scratches and cracks are easily eliminated. To do this, it is necessary to grind the place of damage with sandpaper. The procedure should be carried out by constantly pouring water. When buying bathtubs, you can purchase special means, adapted to remove cracks, as well as all kinds of polishing. At proper care The service life of your bath will reach up to 20 years.
For any bathroom, bathtubs of the most common - rectangular shape are suitable. The choice of sizes is quite high, from very small to huge. To save space in your bathroom, you can use corner baths that can be installed in small spaces. An example is the asymmetric Alegra bath. In addition, there are baths with common standard sizes such as Imperial or Iris. But, if the size of your room allows you to install bathtubs bigger size, then you can install a Laguna bath. The proposed choice of shapes and sizes will allow you to enjoy the procedure of taking a bath to the fullest!
A shower cabin can serve as a replacement for a hydromassage bath or as an addition to it. It is with the help of it that you can save space. A shower cabin is well suited for those people who do not particularly prefer a bath. In addition to its main function, the shower cabin has a number of additional features such as telephone, radio, etc. In addition, a Turkish bath and / or a hydromassage unit can be installed in the shower cabin.
Our old jacuzzi began to smell completely, the hydromassage itself had been muffled for a long time, one nozzle burst, in general, in the trash, so that I could buy this jacuzzi again ...
The question arose which bath to buy. It will be a question of choosing an acrylic bathtub without hydromassage with a size of 140cm-155cm, an angular design, symmetrical, as they also call "a part or a quarter of a circle." Hydromassage has disappeared according to previous operating experience, I will not spread for a long time, in general - no hydromassage!
Then began studying the market for acrylic bathtubs. Of course, I didn’t really understand what was the difference between an acrylic bath for 10tr and 50tr, acrylic and acrylic. Therefore, I began to study the very bottom of the market, such brands as Triton (Triton), BAS (BAS), Aquatek, Appollo, 1Marka, maybe some other names or individual models of more expensive brands got here. I came across an Apollo sale bathtub with glass headrests, a faucet for 13tr in total, but our faucet sticks out of the wall and no one is interested in redoing it, in general, it has disappeared.
A separate conversation is online shopping. It seems that people don’t need money… On the first visit, I didn’t manage to buy any bath, even to talk about something in particular. The answer was call back and silence. Summer season, spat left for the country. There occasionally returned to this issue.
After a long study, again what size is the bathtub 140cm or 155cm, is it necessary to sit in the bathtub, so that everything is included (front panel frame, etc.) or separately. In general, we came to the model of the manufacturer BAS XATIVA (Xativa), 143x143cm. And the size is what you need and there is a seat, and a huge bottom area. We have two small children, it’s just for them to splash around there. And the price was 12800r. full set with delivery and lifting to the floor. I finally got through to the BAS company store and lo and behold, everything was in stock and you could place an order. The order was carried out for a week, but was completed in a clearly defined time frame.
Bathtub installation BAS XATIVA(Xativa). Installers friendly to the online store were called, everything was well torn out of the old one, thrown out, and a new one was installed. BUT! The bath was installed, and a thin layer of sealant was walked along the walls, I thought to put tiles there, but during trial operation, the bath began to sag inward with peeling from the wall. Those. it’s good that I didn’t put the tile, everything would have fallen off. Those. the bathtub does not have sufficient rigidity on its own frame, there was clearly not enough support in the center of the bottom. Here I realized probably the difference between a bathroom for 10tr and 30tr. I called the same installers, after a short altercation, it was decided to fill up the perimeter with sealant and put an additional support from improvised means. In general, now no problems with deformation are visible to the eye, everything is rigid. The extra support helped.
In principle, they are satisfied with the bathroom, as naturally with any new bathroom, with some reservations about the design, which is clearly not finalized. Next time I will study the construction and thickness of the acrylic more carefully!
Technical features
V Lately Acrylic bathtubs are very popular among buyers. A wide range of sanitary products offers options for various bathtubs. Many modern companies demonstrate high-quality products that will be easy to use. Among them, the domestic brand Bas stands out, which produces interesting models of hot tubs. With their help, you can take the quality of rest to a new level.
Technical features
The Russian company Bas has been pleasing its customers with bathtubs, showers and bathroom accessories for over 15 years. Products are manufactured using high-quality Italian equipment in strict accordance with technological parameters and international standards. Products are sold not only in Russia, but also in Kazakhstan and Belarus.
Bas bathtubs are made of high quality acrylic, thanks to which the product is resistant to corrosion and other types of chemical attack. This material is characterized by its plasticity, so the manufacture of bathtubs with its help is a labor-intensive process, the result of which is characterized by a high level of quality.
The wide assortment of the Bas brand showcases classic and modern models of bathtubs in white, among which you can definitely choose the most suitable option for small and large bathrooms. The production of bathtubs is carried out using two different technologies.
- The traditional way - "SprayGan". With it, the acrylic base is reinforced with polyester resin and glass fiber.
- The method developed by the Italian company SIRTEK. In the manufacture of the frame, a complex two-component composition of high-strength polyurethane foam is used.
The manufacturing process itself includes the formation of the shape of bathtubs from a polymeric multilayer material - ABS sheets. With the help of high-end equipment, it is given the necessary shape of the future product and acrylic is applied, which will be 10% of the sheet thickness. This product has a high degree of strength and impact resistance.
The manufacturer Bas also offers its customers the lineup with hydromassage function. The set of such products includes jets that, with the help of a directed movement of water jets, help to achieve complete relaxation and help to get the maximum health benefits.
Pros and cons
Bas products are characterized by a number of advantages.
- High quality materials. In the manufacture of products, raw materials are used from large European manufacturers that have a positive reputation. The color of the products does not fade with age, the surface remains smooth, and the frame does not sag under heavy weight.
- Impact resistance. Production technologies make the surface of the baths resistant to mechanical damage, significantly increasing their service life.
- Antibacterial surface effect. It prevents bacteria from multiplying in a humid environment, making bath operation even more comfortable and safe.
- Easy installation. The product manual contains full information about installation. You can easily and quickly install a bathtub yourself or use the assembly service of professionals from the company.
- Convenient operation. The product form provides for all the necessary nuances of its use. Smooth lines and the necessary recesses for a comfortable pastime and quality rest attract the attention of buyers who value comfort.
- Hydromassage function. Models with this function make the process even more enjoyable, positively affecting the blood circulation in the body and allowing you to reduce the intensity of cellulite and increase stress resistance.
The disadvantages of products from the Bas brand include some characteristics.
- Insufficient points of support. When installing bathtubs complex shapes you may encounter the problem of a lack of support points for comfortable use of the product. This problem can be solved by contacting the service center of the company or independently using improvised means.
- Plastic nozzles. Customers may have problems with leaking nozzles that will have to be replaced.
- Price. many buyers price category for acrylic products seems overpriced, although the manufacturer claims the availability of its products and the ability to choose a model for any budget.
The manufacturer's products have a significant list of advantages, but no one is immune from unpleasant incidents. In any case, Bas consultants are patient with their clients and are ready to delicately solve any problem that arises.
Criterias of choice
The range of sanitary products from the Bas brand is quite large. Among it, you can easily find a bath that will meet all the needs of customers. When choosing a suitable product, the first thing the buyer relies on is the size of his bathroom. Especially for this, the range of the manufacturer includes products of different sizes. Dimensions on average vary from 1300x700 to 1800x1500 mm. For very small bathrooms, you can choose corner products that save a lot of space.
Models "Nicole" 170x102 cm and "Fantasy" 150x88 cm have similar characteristics.
Depending on the functionality, ordinary acrylic bathtubs and hydromassage models are distinguished. In fact, each model provided in the catalog can be equipped with a hydromassage function, the difference will be only in price.
Another important parameter is the shape of the product. The assortment of the Bas brand includes such bathtubs of such a form as:
- oval;
- rectangular;
- angular;
- asymmetric;
- non-standard.
When choosing, it should be borne in mind that the more complex the product, the more support points it requires, and the more it is prone to deformation.
It is better to stay on more traditional oval or rectangular models. Products are attractive to buyers not only for their appearance and quality. Bas bathtubs are ergonomically designed to fit the human body and its curves. In such models, it will be pleasant and comfortable to take water procedures.
The weight parameter for acrylic baths does not play a special role, since such products weigh much less cast iron options and do not cause difficulties with the rise to the floor and during the installation process.
Range overview
In the manufacturer's catalog, products are divided according to the shape of the product for a comfortable search for a suitable product.
Rectangular baths
standard model "Ibiza" has dimensions of 1500x700 mm. It is ideal for a small bathroom, and due to the depth of 430 mm, it will cover most of the body with water. Bath screen height - 530 mm, holds 175 liters.
The ergonomic shape will allow you to enjoy water procedures, feeling comfortable. With the hydromassage function, it will include 6 nozzles - 2 large and 4 small. It can also include a shiatsu back massage function complete with a regulator faucet for balance control of water flows.
The kit includes several lighting options, LEDs, and an electronic control panel. There are several faucets to choose from: 2-position with switching to a shower or a cascade spout.
Models will have similar characteristics "Verona" 150x70 cm, "Malta" 170x75 cm and "Rio" 170x70 cm.
Product "Jamaica" with dimensions of 180x80 cm will be an excellent tool for quality rest. Thanks to big size and a depth of 430 mm, will allow the body to completely immerse in hot water. Smooth curves of the bath will make you feel comfortable. The presence of 8 or 12 jets for air massage will help you quickly relax and relieve stress.
Water volume - 230 l, screen height - 630 mm. Like the previous model, it includes backlighting and LEDs, an electronic remote control. Also included is the possibility of back massage "shiatsu" and cascading 2-position mixers.
It is also worth paying attention to the Fiesta model 194x90 cm.
Rectangular bath "Lima" size 130x70 cm is suitable for a small bathroom or for a children's bathroom due to its small dimensions. It holds only 95 liters and is characterized by a depth of 420 mm. It can include the function of hydro (6 jets) or air massage (8 or 12 jets). The height of the screen is 540 mm. It is possible to install back massage and LEDs. Lighting and other functions are controlled by an electronic remote control. In addition to the options considered, the actual products of a rectangular shape are models "Atlanta" 170x70 cm and "Indica" 170x80 cm.
Asymmetric bathtubs
Product "Lagoon" 1700x1100 mm - a corner version of the bath, which is popular with customers due to its ergonomics and stylish appearance. Despite its compactness, it has sufficient dimensions so that the owner can comfortably enjoy water procedures. It holds up to 295 liters, and the depth in the center is 440 mm. Screen height - 550 mm. Includes the possibility of installing hydromassage in 6 jets or air massage (8, 12 jets). It has a special recess for the convenience of foot massage.
Model "Alegra" has dimensions of 1500x900 mm. Unlike the previous model, it does not have a side, due to which it receives a large area for water procedures with the ability to save space in the bathroom. Depth in the center - 450 mm, holds 220 liters of water. The simple design features smooth lines and comfortable operation. Massage nozzles are scattered along the walls of the bathroom for better relaxation.
Also popular are such models of asymmetric baths as: "Capri" 170x80 cm, "Sagra" 160x100 cm, "Florida" 160x88 cm.
Symmetrical baths
For those who want to buy a "mini-jacuzzi" you should pay attention to the product "Mega" 1600x1600 mm. It has positive reviews due to ease of use and the possibility of obtaining quality rest due to the successful dispersal of nozzles: for hydromassage - 6, for air massage - 8 and 12. It is possible to backlight and turn on LEDs in the kit to create an atmosphere and mood. The capacity is 450 l, the depth of the tub is 480 mm and the height of the screen is 610 mm. There is a compartment for the possibility of receiving a foot massage without filling the tub with water completely.
All photos from the article
Acrylic bathtub Riola
The well-known company Bas has gained wide popularity due to the use of two modern technologies reinforcement of bath surfaces. The first option is based on reinforcing the bass tub with polyester resin and special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly high-density two-component polyurethane foam.
Modern bathtubs
Currently, the company's full lineup is represented by:
- bass acrylic tubs;
- curtains for them;
- shower cubicles;
- special shower enclosures.
30 modern models Bas bathtubs are available in classic rectangular, asymmetric and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.
Any Bass bath is molded using special vacuum forming machines manufactured by the well-known Italian company SELF. During the operation of such equipment, infrared heating of certain zones is used. This method allows you to bend the base sheet into any desired shape.
Bath Fantasy
Popular Bass Models
To date, the acrylic bathtub Bass is the best option in the price-durability ratio for many citizens of our country. The most famous models are considered to be all corner baths, frilly curved shapes that save space and ennoble appearance rooms.
How to choose an acrylic bath? Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:
- Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. Electrical characteristics this bath V - 220/240. Electrical wiring for powering electronic components is made using an RCD. The standard package includes:
- metal carcass;
- front panel;
- convenient removable legs for installation of a bathtub and a drain device.
In addition, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.
Bass corner bathtub model
- Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. The low price is perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner place from durable materials.
- Acrylic bathtub Bass Nicole is a fairly large bathtub. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The bed has a rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.
Bathtub with two vertical sides
Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.
Advantages of acrylic types of bathtubs
Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?
Users and installers of plumbing accessories note a number of advantages of such baths.
- Unlike steel and cast iron counterparts, Bass acrylic bathtubs are lightweight and have very high strength, which has been inaccessible to non-metal products for a long time.
- Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
- All such models of baths have ergonomic shapes, specially created close to the curves of the human body.
- The acrylic surface is highly resistant to various mechanical damages: chips, deformations and scratches.
- Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.
- The surface of such baths is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.
- The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.
Rectangular bath model
Tip: if you want to install a bathtub model with a hydromassage function, then first consider where it is most optimal to place additional equipment.
Conclusion
If it was decided to use Bas products, acrylic bathtubs will be purchased at the most reasonable price. And the number of various additional functions will turn the usual hygienic bathing into a real spa treatment.
High environmental friendliness and ergonomics of all models allows you to install and use these devices for comfortable bathing of babies and young children. They are easy to fit into any interior, thanks to the variety of shapes and convenient way installation. The only thing you should not forget about is the mandatory grounding of such baths. Do not be lazy and risk your health, relying on luck.
Gallery
The well-known company Bas has gained wide popularity due to the use of two modern technologies for reinforcing the surfaces of bathtubs. The first option is based on reinforcing the bass tub with polyester resin and special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly high-density two-component polyurethane foam.
Modern bathtubs
Currently, the company's full lineup is represented by:
- bass acrylic tubs;
- curtains for them;
- shower cubicles;
- special shower enclosures.
30 modern models have classic rectangular, asymmetric and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.
Any Bass bath is molded using special vacuum forming machines manufactured by the well-known Italian company SELF. During the operation of such equipment, infrared heating of certain zones is used. This method allows you to bend the base sheet into any desired shape.
Popular Bass Models
To date, the bass acrylic bath is the best option in terms of price-durability for many citizens of our country. The most famous models are considered to be all corner baths, frilly curved shapes that save space and ennoble the appearance of the room.
Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:
- Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic components is made using an RCD. The standard package includes:
- metal carcass;
- front panel;
- convenient removable legs for installation of a bathtub and a drain device.
In addition, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.
- Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. The low price is perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
- Acrylic bath Bass Nicole - enough. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The bed has a rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.
Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.
Advantages of acrylic types of bathtubs
Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?
Users and installers of plumbing accessories note a number of advantages of such baths.
- Unlike steel and cast iron counterparts, Bass acrylic bathtubs are lightweight and have very high strength, which has been inaccessible to non-metal products for a long time.
- Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
- All such models of baths have ergonomic shapes, specially created close to the curves of the human body.
- The acrylic surface is highly resistant to various mechanical damages: chips, deformations and scratches.
- Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.
- The surface of such baths is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.
- The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.
Tip: if you want to install a bathtub model with a hydromassage function, then first consider where it is most optimal to place additional equipment.
Conclusion
If it was decided to use Bass products, acrylic bathtubs will be purchased at the most reasonable price. And the number of various additional functions will turn the usual hygienic bathing into a real spa treatment.
High environmental friendliness and ergonomics of all models allows you to install and use these devices for comfortable bathing of babies and young children. They are easy to fit into any interior, thanks to the variety of shapes and convenient installation method. The only thing you should not forget about is the mandatory grounding of such baths. Do not be lazy and risk your health, relying on luck.
Gallery
