Liquid soap is very popular these days. It is used in offices, in many institutions and even at home. This soap has a number of advantages, including hygiene and ease of use. However, liquid soap needs a special reservoir from which it must be dispensed. Such a tank is called a dispenser and is sold in almost any supermarket. However, we would not have coped with our task if we did not offer you a method for making a liquid soap dispenser at home.
First of all, as always, we invite you to familiarize yourself with the process of making a homemade dispenser in the author's video.
So what do we need:
- stationery knife;
- empty vial detergent;
- clerical clip;
- scissors.
The author of the video uses a bottle of window cleaner. Let's start making a homemade dispenser.
First we need to remove the gun from the vial.
There is a tube on the gun through which the detergent is dispensed. It is this tube that we need to cut off next.
Next, we need to make a slot at the bottom of the vial to insert the mount there. In our case, we use an ordinary clerical clip as a fastener, more precisely, one of two metal springs, which we also remove.
We will fasten the clamp so that we can hang our dispenser, so the slot should not be very wide, otherwise the ears of the spring will not have anything to cling to.
After we have made a slot with a clerical knife, we insert our clip into it. As for the process of cutting the bottom, it is advised to do it with a hot knife, since the bottom of detergent bottles is usually thick.
Today, experienced housewives are increasingly choosing liquid soap dispensers instead of conventional soap dishes. And this is not surprising. The convenience and hygiene of this device will be discussed in this article.
Peculiarities
You may have noticed that water is constantly retained in an ordinary soap dish after using soap, and stagnant moisture is an excellent environment for the appearance and reproduction of fungal bacteria. Therefore, it is imperative to keep the soap dish clean and dry, but there is not always time to focus on this. Therefore, convenient dispensers have replaced ordinary soap dishes. They are extremely easy to use and keep clean, in addition, they have a very beautiful and stylish appearance. There are a huge variety on the market various models dispensers, so it will not be difficult to choose a device according to your criteria.
Unlike conventional bar soap, liquid soap dispensers are hygienic. It has a rich aroma and is more economical to use. Therefore, more and more often you can meet them in public places and places of large crowds of people. And rightly so, it is unlikely that anyone will want to wash their hands with an incomprehensible bar of soap, which hundreds of people have washed their hands before, or maybe he still managed to lie somewhere. A fragrant, beautifully colored liquid soap in a dispenser is another matter.
Despite the fact that the purpose of such a device as a dispenser (dispenser) is simple and clear, manufacturers are trying to surprise their customers with new types and models of equipment. So be sure to read before buying. possible options dispensers. The choice of them on the market is quite large, and they all have a wide classification in several areas.
Kinds
As mentioned above, there are a lot of types of dispensers. The choice depends on your budget, as well as on the functionality you need. To do this, you need to understand the advantages and differences of some models from others.
Briefly, the entire range of dispensers can be divided into:
- mechanical;
- elbow;
- sensory.
Mechanical liquid soap dispensers are the most popular dispensers in the world. household. They operate on the principle of pressing a button. In this case, the required amount of soap is dispensed. If it was not enough, you can repeat the process. It is a necessary accessory for a bathroom or kitchen, which has a nice price and a huge variety of different designs and options. You can easily find what suits you.
Elbow dispensers are activated by elbow pressure. These are highly hygienic devices because they allow you to avoid manual contact with its elements. The soap dosage is also determined by pressing the elbow on the dispenser lever. Often these types of dispensers can be found in medical institutions or in catering kitchens where absolute hygiene is essential. The cost of such mechanisms is low, but most likely they will not fit the house in their appearance. Too simple and unremarkable.
Sensor dispensers can also be called automatic or non-contact. These are the most advanced models that allow you to completely avoid physical contact with the device, providing one hundred percent hygiene. In order to use soap, just put your hands to the dispenser, and it will automatically give you a metered amount of liquid. As a rule, such devices are powered by C or D batteries. These batteries have a fairly long life, so they will last for a large number of operations. You don't need to change them often. Dispensers installed in public areas can be mains-operated or have the ability to run on both batteries and electricity. In terms of cost, these are the most expensive devices, it is not always advisable to use them at home.
According to the type of attachment, dispensers are wall-mounted, desktop and built-in. Wall mounted dispensers are great for use in public areas or small home bathrooms to save space. They usually have a convenient button to press, a reliable pump and a viewing window that allows you to control the level of soap in the device. The floor double dispenser can be opened with a key.
Tabletop dispensers are popular for use in the kitchen or bathroom. They have a huge design range to meet the requirements of any interior. The built-in mechanism dispenses soap, thereby saving its consumption. Such dispensers do not cause inconvenience during their care, they are quite easy to unwind and wash inside and out if necessary. Such dispensers are made of moisture-resistant and wear-resistant materials, they can be of various shapes, colors and have an affordable price.
Embedded devices are distinguished by their stylish look. The mortise soap container is hidden under the tabletop, which creates free space on top. You don't have to go under the sink to refill the tank. As a rule, you can add soap to the device from above. The dispenser is easy to install and easy to use. The body and feed tube are made of high-strength plastic, which eliminates the occurrence of corrosion under the influence of water and chemical detergents. The disadvantages of this device include its high cost.
For a room where food is prepared, it is advisable to choose a kitchen hanging or hanging appliance.
materials
Having done right choice liquid soap dispenser, you will not only protect yourself from unpleasant and harmful bacteria, but also transform the interior of your kitchen or bathroom. And in order for the selected dispenser to serve you faithfully for a long time, you should pay attention to the material from which its body is made, as well as to the pump mechanism.
The standard material from which dispensers are made is stainless steel, glass or plastic. Each of them has both pros and cons. Next, we consider the characteristics of these materials.
The main advantage of plastic is its cheapness. Despite this, you can find plastic dispensers of fairly high and decent quality. For the convenience of customers, designers have developed a huge variety of different designs, shapes and colors of plastic dispensers. It is best to choose a dispenser from this material if a portable type of device is required.
Glass dispensers are best for wall placement. So you protect yourself from tipping over the device. Such models on the wall, filled with fragrant and pleasant in color liquid soap, look very stylish, neat and expensive. The downside of this type of device is its high price.
Stainless steel product is versatile, convenient, practical and beautiful device , which will easily fit into different styles of bathroom or kitchen design. It can be wall-mounted, placed on a shelf or on a sink. The dispenser made of steel is a reliable and safe device in operation.
When choosing a dispenser, be sure to pay attention to whether the chosen model fits the style of your bathroom or kitchen. To achieve the best effect, use not only the dispenser, also try to choose a set of accessories from the same series. For example, a dispenser and a glass for toothbrushes in the same style and color.
The above are the main materials from which dispensers are made, but today on the market you can also find dispensers made of materials such as ceramics, stone, wood, bronze, brass and others.
Dosing mechanisms
The dispenser is a container that is filled with liquid, and the mechanism by which the liquid is dosed and dispensed to the consumer. In another way, this mechanism can be called a pump. Dispensers are also distinguished by the type of dosing mechanism and the form of liquid dispensing. There are three forms of liquid supply:
Jet
When pressed, the liquid is given out by a jet. As a rule, this form is suitable mainly for dispensers with liquid soap. The soap has a thick consistency, so the outlet should be fairly large. Also, this type is suitable when using a gel-like antiseptic, because their consistency is similar.
Foam
The dosing mechanism is equipped with a special foamer. Thanks to him, foam immediately forms from the soap
Spray
This type of dosing mechanism is used in antiseptic dispensers. When pressed, the liquid is sprayed. The outlet of the mechanism is very small, thanks to which the spraying of the antiseptic on the hands occurs evenly.
The volume of the dose of liquid per operation varies depending on the form of the mechanism. There is no universally accepted norm, so each manufacturer sets its own.
Approximate averages are shown below.
- liquid soap is dispensed with approximately 1 ml per press;
- soap-foam - about 0.6 ml at a time;
- skin antiseptic - 1.5 ml per 1 actuation.
Some manufacturers leave the user the right to change the amount of liquid dispensed per actuation. There are few such devices, but sometimes they are necessary and in demand.
The pump according to its device can be either built into the dispenser body or removable. When choosing a dispenser, remember that the removable mechanism has clear advantages. Firstly, the removable pump can be easily removed and washed if necessary. Secondly, in the event of a breakdown, it can also be easily removed and replaced with a new one. And in the case of a built-in mechanism, you will have to dismantle and change the dispenser completely.
Before making a choice of the necessary dispenser, decide on the type of liquid that you will use. Because if you use the dosing mechanism for other purposes, negative consequences may soon appear that will lead to equipment breakdown.
Design
From an aesthetic point of view, the use of dispensers looks very impressive and stylish. Thanks to their design, they can bring a bright accent to the interior and decorate any room. May be faced with huge selection stylish, unusual and colorful dispensers for every taste. For example, the square version is quite popular.
Many devices are equipped with a special window that allows you to control the level of liquid soap and replenish it in a timely manner. The existing touch panel allows you to wash your hands with soap and water without touching the accessory itself.
original and practical design at the dispenser with a sponge for washing. It has a fixed stand for a washcloth or sponge. This version is very convenient to use, it can be installed directly in the shower or in the bath.
Among the most popular colors of these products:
- Brown;
- Red;
- lilac;
- green;
- blue;
- gold;
- transparent;
- Orange.
So, let's figure out what you need to pay attention to when choosing a plastic dispenser. First, the plastic liquid soap dispenser must be made of a material with a high degree of shock and moisture resistance. Second, make sure the dispenser has a corrosion resistant valve that won't rust.
If we talk about the strength of the liquid soap dispenser, the ceramic dispenser clearly loses to its counterparts made of stainless steel or durable plastic. But on the other hand, it can very organically fit into the interior of your bathroom and decorate it.
Probably the most winning option is a stainless steel liquid soap dispenser. Such dispensers are the strongest and most durable.
We have already discussed all the pros and cons of the materials from which a liquid soap dispenser can be made. Let's now deal with the types and types of dispensers. What types of soap dispensers are there, how to determine exactly what you need?
The bathroom soap dispenser is a modern trendy accessory that can be seen in almost any bathroom. And if relatively recently it could only be found in public places, such as hotels or restaurants, today the liquid soap dispenser is a familiar inhabitant of our apartments. The range of dispensers that manufacturers offer is simply huge, so we decided to make it easier for you by making a small virtual review.
What are the dispensers
Sensor dispensers
The automatic dispenser, as the dispenser is also called, is very convenient. Here it is not tedious to press any buttons or levers to get the necessary single dose of soap. The touch soap dispenser works automatically, you just have to bring your hand to the hole through which the liquid soap is supplied. This is made possible thanks to design features device.
Completely non-contact, it is equipped with a special infrared sensor that responds to gestures and gives a command to issue a dose of detergent. Then the next one is automatically dialed. The only thing that is required of you is to adjust the dosage after installation. Subsequently, the required portion will be served without your participation.
Such models are equipped with fairly quiet pumps, so sensor dispensers do not create much noise. Devices work from a network of an electric current.
Wall dispensers
The wall-mounted version not only looks great, but also does not require space on the shelf, since the device is mounted directly to the wall. The device is very easy to use. In order to get a portion of detergent, you just need to press the top valve. The button, which also acts as a piston, will push the soap into the outstretched palms.
You can install this type of dispenser yourself. For this you will need:
- electric drill;
- screwdriver or screwdriver;
- a special drill if the bathroom walls are covered with ceramic tiles;
- pencil;
- self-tapping screws.
And here is the installation process itself:
- Select the location where the device will be attached. Choose the optimal location from the floor so that if there is a child in the house, it is convenient for him to use it.
- Mark the places where you need to drill holes.
- Insert the dowels into the prepared holes.
- Attach the dispenser to the wall and fix it with self-tapping screws.
Table dispensers
Visually, they are beautiful bottles. Most often sold as a single set with a soap dish and a cup for toothbrushes, creating a single stylish ensemble. The desktop dispenser in terms of the method of supplying soap does not differ at all from the previous version.
But such devices have several valuable advantages:
- Relatively low cost. For example, elegant accessories from BXG look very stylish and are very budget-friendly.
- Mobility. When compared with any wall options, which can no longer be moved, the desktop device can be rearranged to any place. And if it looks bright and unusual, then it may well become a stylish detail that enlivens the interior.
- Unlike the classic soap dish, these dispensers always look neat.
Built-in dispensers
The built-in dispenser is convenient because it allows you to remove the tube with liquid soap from a prominent place. After all, someone prefers minimalism in style, and such accessories simply do not fit into the overall interior design. And then the ability to place the dispenser itself under the sink, bringing up only the valve, will be a great solution. Only a stylish chrome-plated button and the same faucet of the soap dispenser will be in sight.
The installation process of the device is quite simple, so you can handle it perfectly on your own. It looks like this:
- The dispenser is attached directly to the sink itself, so you will need a set of tools for cutting faience.
- Cut a hole of the required size (we focus on the nose of the flask where the detergent will be stored).
- Insert the flask from the bottom of the sink, and screw the feeding device on top.
Elbow dispensers
The elbow dispenser differs from push-button analogues only in that the feeder button can also be activated using the elbow. positive moment in this case lies in the fact that you do not touch the body of the object with dirty hands. And the transmission of pathogenic bacteria is completely excluded.
Dispenser functions
The only purpose of such devices is the issuance of a certain portion of the detergent necessary for high-quality hand washing. It would seem that it is absolutely correct, but at the same time an erroneous opinion.
Modern models of dosing devices have such an elegant appearance that they can serve as an unusual part of the bathroom interior.
Stylish gold dispenser fits or
Manufacturers really did their best to look like this banal accessory: windows through which the filler is visible, mirrors installed on the front panel, lighting, various decorations, engraving and drawings - all this makes an ordinary dispenser a stylish interior decoration.
materials
The most common material used in the manufacture of dispensers is metal. To be more specific, stainless steel or aluminum. Manufacturers, seeking to attract consumers, use tempered glass or plastic. Quite often there are combined models that harmoniously combine several materials.
For more expensive exclusive models, decorative rock, natural veneer, rhinestones, mother-of-pearl, crystals. Fantasy designers as an inexhaustible source!
Detergent filling and dispensing options
In addition to the material used to manufacture the device, as well as the method of dispensing liquid soap, the choice of dispenser is also influenced by the method of refilling the product. The most common are bulk models equipped with special flasks, which act as a storage for gel or soap. When the product is completely consumed, it is enough to simply replace it with any other. It is not necessary to purchase a similar composition.
Such dispensers are suitable for the interior of the bathroom
In cartridge dispensers, the containers themselves are simply replaced. This is a somewhat simpler option than filling filling devices. But for some models, it is necessary to purchase exactly “native” cartridges, that is, from the original manufacturer. The cost of cartridge dispensers is slightly higher than filling devices.
Soap supply can also be done in several ways. Both the mechanical version and the electronic soap dispenser can dispense both liquid and gel-like fillers.
Some devices with a slightly different design convert the funds at the time of dispensing into foam, in particular dispensers from Tork.
As you can see, modern dispensers are not only easy to use, but also truly beautiful. We hope that our article will help you make a rather difficult choice.
