At the moment, the heating device based on the processing of liquefied or natural fuel by a gas boiler is considered the most economical way of heating. The "heart" of this system is a gas boiler. This is a device for obtaining thermal energy for heating and hot water supply in the process of combustion of gaseous fuel.
The Ariston gas boiler was made in Italy, but during its development all Russian realities were taken into account - low gas pressure, power surges, polluted water and very cold winters. In other words, Italian engineers took into account all the potential dangers and made really high-quality equipment.
General specifications
All models of heating equipment from Ariston are equipped with almost the same functions, regardless of the type and cost of equipment. There are some minor differences in the form of the design of the unit, its size and purpose.
Each Ariston gas boiler has a convenient function - "auto". The sensor is responsible for the temperature in the room. The smart device will independently control temperature regime, select the optimal value based on the temperature indicators in the house and on the street.
It is also worth noting other general technical characteristics that Ariston boilers have:
- Built-in automatic air vent to eliminate accumulated air in the system.
- Protection against freezing, scale and contamination of the circulation pump.
- Semi-automatic make-up for the primary circuit.
Whole the lineup equipped with good sound insulation, thanks to which the operation of the unit is almost inaudible.
The manufacturer took care of installing high-quality thermal insulation that protects the equipment from low temperatures.
Comes with instruction manual and menu.
All information documents are provided in Russian, which greatly simplifies the work with the unit, since if the heating system malfunctions, you do not have to contact specialists, it is enough to study the manual and identify the cause of the inoperability.
The guarantee for the Ariston gas boiler is only two years, if it is a condensing type - three years. On average, the dimensions of the system are equal to 700x420x600mm, which is slightly larger than that of competing companies.
Newer models have a convenient control system. With it, you can set certain parameters remotely. Also, the devices are equipped with automatic diagnostics of operation, as a result of its functioning, an error code can be detected, the decoding of which will be prompted by the operating instructions.
VIDEO: Wall-mounted boilers Ariston Genus EVO
Types of heating system
There is a wall-mounted gas boiler Ariston and floor. The first is compact copper heat exchanger(in rare cases, steel), the package includes all the necessary strapping elements, functions auto tuning microclimate and modulating burner. The unit is installed on a flat wall surface.
Wall-mounted gas boilers are considered more sensitive to unstable gas supply pressure and water supply.
The equipment is made of cast iron material, has a large weight, dimensions, good service life, is adapted to Russian weather conditions and has a power of up to 64 kW, which is enough to heat a building with an area of up to 500 sq.m.
Wall-mounted gas boiler with a built-in accumulative two-section stainless steel boiler for 40 liters Ariston
The outdoor device is quite "capricious" in relation to the control of temperature conditions.
By functional features gas systems subdivided into:
- Single-circuit, which are based only on space heating.
- Double-circuit - designed for home heating and supply hot water. When supplying water automatic system the unit closes the valve of the primary circuit, and directs all the power to water heating. A double-circuit gas boiler Ariston will serve good decision two basics of life support at once - heat and hot water.
By type of burner and thrust:
Boiler series
The official website of the company provides a catalog with three main lines of Ariston gas boilers.
Gas boiler Ariston Genus
The double-circuit wall-mounted unit is equipped with two heat exchangers, one consists of copper, the second steel, LCD display, remote control and power from 24 kW to 35.
The Ariston gas boiler of the Genus modification has two subspecies:
- The Ariston Genus-Evo model is a two-circuit type of device with a closed and open combustion chamber.
- Premium - condensing type equipment with a large coefficient useful action. Often used for heating industrial rooms.
Small Clas double-circuit heating systems have automated functionality settings, several levels of water supply filtration and expansion tank, up to 8 liters.
ARISTON CLAS X 24 FF, price 36400 rubles.
- Evo - the modification is capable of performing Auto, Info plus tasks. The unit is equipped with a closed combustion chamber with a power of 28 kW, open - 24 kW.
- Clas B - a two-circuit system with the ability to connect a boiler directly to an indirect type of water heating.
- Premium Evo - condensing type with "Auto", "Info +" bs 24 ff and 30 functions.
- Premium series - condensing heating system without add-ons.
The devices have the smallest dimensions, weight, low performance and economical fuel consumption. Users especially highlight the Egis Plus model. According to the operating instructions, the Plus series prepares water using a heat exchanger made of steel, and the coolant is heated using a copper heat exchanger.
Ariston EGIS Plus 24FF
The unit is adapted to bad weather conditions and is designed for critical frosts. Even at a temperature of -50 ° C, the unit does not issue any delays, problems or other malfunctions.
Operation manual and equipment package
All information about the installation of equipment contains the instruction manual. It describes in detail in Russian the rules for installing an Ariston gas boiler.
The following components are often included in the package of the device:
- Equipment;
- fasteners;
- Union;
- Dowels, rings;
- Instructions for use, maintenance.
Chimney sold separately.
Reviews, price, pros and cons
Based on the statistics of the heating equipment market, Ariston equipment can be classified as medium price category. Prices for devices vary between 29,000-65,000 rubles.
Consumers identify several main advantages and disadvantages of boilers:
Mandatory measures before putting the boiler into operation:
- checking the fluid pressure in the system;
- gas pressure check;
- automation testing.
Any gas equipment must be serviced by qualified personnel. It is recommended to sign a contract for service maintenance and check all systems once a year.
Boiler malfunctions are mainly associated with installation errors and a drop in water pressure. A common problem - in the shower, the water begins to alternate from hot to cold and vice versa. With sufficient pressure in the pipes, this problem can be solved.
VIDEO: Autonomous heating. Malfunctions and repair of the gas boiler "ARISTON"
When conducting overhaul it may be necessary to install a new heating system. Today, a huge range of heating boilers is offered, the differences between which are the fuel used, the manufacturer’s power, etc. Note that the Ariston double-circuit gas boiler is in greatest demand, which has excellent technical specifications and accessibility.
Gas equipment manufactured by Ariston
Gas equipment manufactured by Ariston, depending on the model under consideration, is designed for installation in autonomous heating systems up to 500 m 2 in area. Note that these models are capable of not only working to heat the coolant, but are also able to provide the user with hot water.
The double-circuit wall-mounted gas boiler Ariston is distinguished by its compact external dimensions, as well as simplicity and ease of operation and maintenance. For the installation of equipment, it is not necessary to allocate a separate room, as, for example, for liquid and solid fuel heaters.
Due to the wide power range, Ariston equipment can be easily selected for installation in a specific system, based on the characteristics of the room to be heated.
List of mandatory functions in heating equipment
- The language menu on absolutely all models offers the Russian language.
- The AUTO function is set, which allows you to automatically adjust the power based on the indoor and outdoor air temperatures.
- Absolutely all Ariston units have heat and sound insulation.
- The manufacturer gives a two-year guarantee for all its products of the traditional type, and three years for the condensing type.
Safety in the operation of the equipment is ensured by the following built-in functions:
- semi-automatic make-up;
- pumping air out of the system;
- blocking the operation of the circulation pump;
- protection against freezing and scale formation.
gas boilers heating double-circuit turbocharged Ariston are simple and easy to operate and maintain.
The main advantages of Ariston equipment
Ariston equipment is offered in two versions: wall-mounted and floor-mounted. The former are used for installation in the heating systems of private houses, in which, in addition to heating, it is important to receive hot water. Depending on the model, the equipment may be:
- with an open combustion chamber (combustion products are discharged naturally);
- with a closed combustion chamber (removal is carried out by force).
Closed chamber equipment is connected to coaxial chimney. The difference lies in the fact that these models have a built-in fan, thanks to which the combustion products are removed in a timely manner.
The main advantage of devices of the second type is high safety, as well as the fact that air is taken from outside the room, devices of the first type take the oxygen necessary for normal gas combustion from the room.
It is important to note that Ariston gas double-circuit wall-mounted boilers stop working for heating the coolant immediately after the hot water intake is turned on. This point is important to consider when choosing and buying a device.
Outdoor appliances have a large power range. This equipment is excellent for use in systems autonomous heating living quarters of any size. As a rule, floor-standing units are not designed for heating water, so if this issue is relevant for you, you will have to buy a boiler separately.
Design features and equipment arrangement
All offered options for gas boilers differ in the type of combustion chamber: closed or open. If the device is equipped with an open chamber, then it will need to be connected to a chimney, while the air is taken from the room in which the unit is installed.
In the event that the Ariston wall-mounted double-circuit gas heating boiler is equipped with a closed chamber, then the removal of combustion products occurs forcibly, using a built-in fan. Such equipment is connected to a coaxial chimney. The air intake is carried out from outside the room, which is a great advantage, since the operation of the device does not burn the oxygen in the room.
Gas wall double-circuit boilers heating Ariston in their design have two heat exchangers. One is designed for heating process water, the second for heating the coolant. Their production can be carried out in several versions: bithermic, separate and with a built-in boiler.
The main characteristics of gas boilers "Ariston"
- the menu of the device is displayed in Russian, if necessary, you can easily set the required temperature for heating the coolant and hot water;
- high resistance to sudden voltage drops in the network;
- the equipment will continue to work stably even at reduced pressure of water and gas in the respective systems;
- ease and convenience in installation, maintenance and operation;
- high operating efficiency.
As for the shortcomings of the equipment, it is important to note here the inability to simultaneously work on heating the coolant and sanitary water, but this problem, if desired, can be easily solved by installing a boiler.
The gas double-circuit wall-mounted boiler Ariston can have in its design special sensors for determining the internal and external air temperature. All operating parameters are displayed on the built-in display, which makes it easy to control work processes and, if necessary, make the necessary adjustments to them.
Causes of malfunctions of gas-type boilers
Even if the operating instructions for the Ariston gas boiler are thoroughly studied, it is impossible to insure that the device will not break. There are many reasons why equipment can fail, for example:
- maintenance of the device was not performed in a timely manner or with violations;
- insufficient air supply to the combustion chamber;
- unprofessional repair or maintenance of control units or burner adjustment;
- when carrying out maintenance, low-quality spare parts were used;
- incorrect temperature setting.
There are other more complex breakdowns of gas heating boilers, which should only be repaired by an employee. service department. Therefore, regardless of the complexity and cause of the malfunction, the Ariston double-circuit gas boiler must be repaired and maintained by a master who has not only special tools and experience, but also a special permit for repair and maintenance of gas heating boilers.
Do not save on the purchase, installation and connection of gas equipment, trust the implementation of all work processes only to professionals.
Gas boiler Ariston Genus EV - video
The most popular models of gas boilers "Ariston"
Genus Premium 35 NG belongs to the condensing type devices, which are easily programmed for various operating modes. The advantage of the equipment is its high efficiency. Double-circuit gas boilers Ariston, equipped with a closed combustion chamber, provide high safety and reliability of equipment in operation.
Exhaust gases are discharged through a coaxial chimney forcibly. It is important to note that the equipment is capable of self-diagnosis, which allows you to quickly identify a malfunction and take measures to eliminate it.
Equipment Egis 24 CF NG (EAA1) is equipped with an open combustion chamber. The unit is connected to a chimney, the diameter of which must be greater than 12.5 cm. Two heat exchangers are installed in the design of the device. Type of installation wall.
Ariston Clas is highly economical in operation. Today, options are offered, the power of which can range from 24 to 28 kW.
The combustion chamber in Ariston Clas can be closed or open. The design of the device is equipped with two heat exchangers. The main advantage lies in the ability to continue to work stably under plummet pressure in the gas pipeline or water supply system.
If you decide to buy a wall-mounted double-circuit gas boiler Ariston of any other series, you can be sure that the equipment you purchase will also differ in quality, reliability and efficiency in operation.
Features of the choice of heating equipment
When choosing heating boilers, it is important to take into account the height of the ceilings, the area of \u200b\u200bthe premises, the material from which the structure and interfloor ceilings are built, the quality of window blocks. Lot useful information You can find out if you carefully study the instruction manual for the Ariston gas boiler. Having correctly determined all the above-mentioned parameters, you can find out what power the device will be most profitable to purchase.
Calculations should be performed according to the following scheme. If, for example, a house has an area of 150 m 2 with a ceiling height of 2.7 - 3 meters, windows, ceilings and walls are well insulated, then at the rate of 1 kW per 10 m 2, we get 15 kW of device power, to which it is recommended to add 10 %. As a result, we get the maximum required power of heating equipment. If, in addition to heating, there is a need for hot water, then 4 kW of power should be added to the result.
In addition to the considered parameter, there are others, which in no case should be forgotten when choosing. Therefore, if you doubt that you can properly deal with the choice of a gas boiler, then contact a specialist who, taking into account all the requirements and features of the house in which the device will be installed, will select it according to all the necessary parameters.
Double-circuit gas appliances make our life more comfortable and enjoyable. They are quite practical to use, suitable for heating country houses, and small apartments. They are used for heating industrial or warehouse buildings, the area of which is not more than 500 sq.m.
The advantages of Ariston boilers are that, in addition to heating buildings in winter period, they heat the water used in the home all year round. It is quite convenient and does not require the installation of additional equipment.
General characteristics of Ariston boilers
The description of Ariston gas units must begin with the characteristics of their main part - the burner. This element is used to burn fuel and to transfer thermal energy to the heating system.
Types of boiler burners:
- ordinary
- modulation
The modulating burner is more convenient to use. It provides for automatic power control depending on the temperature of the device.
According to the type of removal of combustion products, burners are divided into:
- closed type
- open type
Units with a closed type burner are safer to operate. combustion products natural gas in this case do not fall into the room. Use is not required. A coaxial pipe is simply connected to the device and brought out.
The design of the coaxial pipe provides for the presence of two layers, which ensures the simultaneous removal of waste and the flow of air from the street into the burner.
Equipment with an open burner provides for the mandatory use of a chimney to remove combustion products.
Technical data of Ariston gas appliances
- Ariston boilers are used for heating and water heating, that is, they are double-circuit. Each modification has its own characteristics, but the common type of fuel is gas.
- The gas combustion chamber can be either open type or closed. In the presence of a chimney, units with an open chamber are used. And in apartments of multi-storey buildings, where there are not always chimneys, equipment with a closed combustion chamber is used.
- Power. Using this indicator, the gas consumption required to heat the room is calculated.
- Compactness. Wall appliances are used in small, narrow rooms. Floor-standing units used in production or storage areas are heavier and require more space for installation.
- The presence of a control unit. This element is indispensable when turning off the water, a sharp decrease in gas. In case of any malfunctions, the unit will immediately turn off the device, which will prevent damage. It can also save fuel consumption.
Ariston boilers are used for heating and water heating, that is, they are double-circuit Characteristics of Ariston boiler models
A distinctive feature of Ariston boilers is their high quality. After all, the name of the company is translated from Greek as “the best”.
Its products are especially popular among middle-income consumers. Gas boilers of this brand are purchased for space heating up to 500 sq.m. The company's products are universal. The transition to liquefied fuel is carried out only by replacing the burner.
Practical to use are dual-circuit wall-mounted gas appliances. It is represented by three lines, each with its own modifications.
For all modifications of boilers, the common is:
- small size.
- hot water supply, in the absence of its centralized supply.
Different modifications differ in structure, the common thing is their low cost and high-quality performance of parts.
Basic equipment of units from Ariston:
- double .
- electronic control module .
- carbon monoxide control.
- support of the microclimate in the building or in a separate apartment.
- control of water freezing inside the system.
Let's take a closer look existing species Ariston equipment.
Ariston Genus
- Are issued with the double heat exchanger. All modifications are double-circuit and are mounted on the wall.
- This model is considered the most functional of all Ariston devices. It has an LCD display, a control panel with buttons. Ariston Genus can be configured to work offline for a whole week.
- The display shows basic information about the status of the device and a list of possible errors. The burner is modulating, that is, fully controlled by electronics. This function increases the comfort of using this model of gas appliance, due to the minimum control by the consumer.
The Ariston Genus line includes Evo and more expensive Premium models.
The Evo model is a two-circuit gas appliance with a burner of both types: open and closed.
Genus Premium condensing boilers. They are used for heating residential buildings and commercial buildings. Power range from 24 kW to 35 kW.
Ariston Clas
- Small size device.
- This is a boiler with two circuits and a graceful appearance. The reduced dimensions did not impair its functionality in any way.
- Expansion tank for 8 liters. Hot water is heated fairly quickly
Existing modification:
- Evo is available in open and closed combustion chambers. Power with an open burner - 24 kW, with a closed - 24 - 28 kW.
- Premium Evo condensing type appliance. Has advanced comfort and freezing functions
- Premium simple condensing unit.
Ariston Egis
- Installed mainly in rooms up to 200 sq.m.
- The most common Ariston gas appliance model in our country. It heats water with a stainless steel heat exchanger, and a copper heat exchanger is used for heating.
- The compact device, differs in profitability and can be used under complicated weather conditions. For example, at sharp sub-zero temperatures.
- The device is equipped with a modulating gas burner , which allows for electronic control over the operation of the boiler.
This model is adapted to work in harsh climatic conditions. Normally withstands changes in gas pressure. The device is equipped with a collector into which condensate flows. This ensures operation at temperatures below 50 degrees.
The cost of boilers Ariston
The average cost of Ariston Genus boilers is 54,000 - 72,000 rubles, Ariston Clas - 25,000 - 34,000 rubles, Ariston Egis - 27,000 - 34,000 rubles
Choosing a gas appliance for heating
Ariston products can be found in the catalogs. There are many models of gas appliances. The main mistakes with the wrong choice of the unit are made from a lack of information. Therefore, before visiting the store, you should familiarize yourself with the basic tips for choosing a wall-mounted gas appliance.
When choosing a boiler, consider the following points:
- The size of the kitchen, as the place where the heating device is most often installed. In the store, the choice begins with a consideration of the overall dimensions of the device and select it individually for your kitchen.
- Then they go to the technical data and study the type of water heater in the device. If there are a large number of people in the family, then it is not recommended to purchase a boiler with.
- In this case, it is more rational to purchase a boiler with a storage tank for hot water. and choose equipment for the amount of water that you will need for everyday use.
- Evaluate the combustion chamber of gas equipment. It is closed and open. It is recommended to choose a boiler with a closed chamber, because it is safer to operate. The presence of a chimney is optional, which is important in multi-storey buildings. It is enough to buy and bring a coaxial pipe to the street.
On this page you can find and download instructions for gas wall boilers Ariston in pdf format.
Gas wall-mounted boilers Ariston series GENUS 24 FF, GENUS 28 FF, GENUS 36 FF, GENUS 24 CF, GENUS 28 CF. User manual. Language: RU, RO | pdf 786.93 Kb
Gas wall-mounted boilers Ariston of the GENUS 24 CF, GENUS 28 CF series for heating and hot water supply. The passport. Language: RU, RO | pdf 1.09 Mb
Gas wall-mounted boilers Ariston GENUS 24 FF, GENUS 28 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 1.07 Mb
Gas wall-mounted boilers Ariston GENUS 24 FF, GENUS 28 FF series. Installation and maintenance instructions. Language: RU, RO | pdf 5.05 Mb
Gas wall-mounted boilers Ariston of the GENUS 24 CF, GENUS 28 CF series. Installation and maintenance instructions. Language: RU, RO | pdf 3.14 Mb
Gas wall-mounted boilers Ariston of the GENUS 36 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 893.17 Kb
Gas wall-mounted boilers Ariston GENUS 36 FF series. Installation and maintenance instructions. Language: RU, RO | pdf 2.00 Mb
Gas wall-mounted boilers Ariston series GENUS 24 CF, GENUS 28 CF, GENUS 24 FF, GENUS 28 FF, GENUS 35 FF. User manual. Language: RU, RO | pdf 7.32 Mb
wall single-circuit boilers CLAS System 24 FF, CLAS System 28 FF, CLAS System 32 FF. Installation and maintenance instructions. 2008 | pdf 4.71 Mb
Gas wall-mounted single-circuit boilers CLAS System 15 FF, CLAS System 24 FF, CLAS System 28 FF, CLAS System 32 FF, CLAS System 15 CF, CLAS System 24 CF, CLAS System 28 CF. User manual. 2008 | pdf 1.24 Mb
Gas wall-mounted double-circuit boilers EGIS 24 CF. Installation and maintenance instructions. 2008 | pdf 1.01 Mb
Gas wall-mounted double-circuit boilers EGIS 24 FF. Installation and maintenance instructions. 2008 | pdf 1.24 Mb
Gas wall-mounted double-circuit boilers EGIS 24 FF, EGIS 24 CF. User manual. 2008 | pdf 497.92 Kb
Gas wall-mounted boilers Ariston series BS 24 FF, BS 24 CF. User manual. Language: RU, PL | pdf 439.96 Kb
Gas wall-mounted boilers Ariston BS 24 CF series. Installation and maintenance instructions. Language: RU, PL | pdf 1.86 Mb
Gas wall-mounted boilers Ariston BS 24 CF series for heating and hot water supply. The passport. Language: RU, PL | pdf 1.05 Mb
Gas wall-mounted boilers Ariston BS 24 FF series for heating and hot water supply. The passport. Language: RU, PL | pdf 1.08 Mb
Gas wall-mounted boilers Ariston BS 24 FF series. Installation and maintenance instructions. Language: RU, PL | pdf 2.33 Mb
Gas wall-mounted boilers Ariston BS II 15 FF series. User manual. Language: RU, UA, RO | pdf 228.38 Kb
Gas wall-mounted boilers Ariston BS II 15 FF series. Installation and maintenance instructions. Language: RU, UA, RO | pdf 1.71 Mb
Gas wall-mounted boilers Ariston BS II 15 FF series for heating and hot water supply. The passport. Language: RU, UA, RO | pdf 1012.93 Kb
Gas wall-mounted boilers Ariston BS II 24 FF series. Installation and maintenance instructions. Language: RU, UA, RO | pdf 1.88 Mb
Gas wall-mounted boilers Ariston BS II 24 FF series for heating and hot water supply. The passport. Language: RU, UA, RO | pdf 1018.39 Kb
Gas wall-mounted boilers Ariston BS II 24 CF series for heating and hot water supply. The passport. Language: RU, UA, RO | pdf 1005.51 Kb
Gas wall-mounted boilers Ariston BS II 24 CF series. Installation and maintenance instructions. Language: RU, UA, RO | pdf 1.38 Mb
Gas wall-mounted boilers Ariston series BS II 24 FF, BS II 24 CF. User manual. Language: RU, UA, RO | pdf 246.76 Kb
Gas wall-mounted boilers Ariston series CLAS 24 FF, CLAS 28 FF, CLAS 24 CF. User manual. Language: RU, RO | pdf 661.98 Kb
Gas wall-mounted boilers Ariston CLAS 24 CF series. Installation and maintenance instructions. Language: RU, RO | pdf 2.28 Mb
Gas wall-mounted boilers Ariston of the CLAS 24 CF series for heating and hot water supply. The passport. Language: RU, RO | pdf 1005.77 Kb
Gas wall-mounted boilers Ariston of the CLAS 24 FF, CLAS 28 FF series for heating and hot water supply. Installation and maintenance instructions. Language: RU, RO | pdf 2.78 Mb
Gas wall-mounted boilers Ariston of the CLAS 24 FF, CLAS 28 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 1.13 Mb
Gas wall-mounted boilers Ariston series CLAS B, CLAS B Premium: CLAS B 24 CF, CLAS B 24 FF, CLAS B 30 FF, CLAS B Premium 24, CLAS B Premium 35. Instruction manual. Language: RU, PL, CZ, RO, HU | pdf 2.52 Mb
Gas wall-mounted boilers Ariston CLAS B 24 CF series. Installation and maintenance instructions. Language: RU, PL, CZ, RO, HU | pdf 7.20 Mb
Gas wall-mounted boilers Ariston of the CLAS B 24 CF series for heating and hot water supply. The passport. Language: RU, PL, CZ, RO, HU | pdf 1.09 Mb
Gas wall-mounted boilers Ariston of the CLAS B 24 FF, CLAS B 30 FF series for heating and hot water supply. Installation and maintenance instructions. Language: RU, PL, CZ, RO, HU | pdf 8.84 Mb
Gas wall-mounted boilers Ariston of the CLAS B 24 FF, CLAS B 30 FF series for heating and hot water supply. The passport. Language: RU, PL, CZ, RO, HU | pdf 1.15 Mb
Ariston gas wall-mounted boilers of the CLAS EVO 24 FF, CLAS EVO 28 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 28 FF, CLAS EVO SYSTEM 32 FF, CLAS EVO 24 CF, CLAS EVO SYSTEM 24 CF, CLAS EVO SYSTEM 28 CF series. User manual. Language: RU, RO | pdf 373.49 Kb
Gas wall-mounted boilers Ariston series CLAS EVO 24 CF, CLAS EVO SYSTEM 24 CF, CLAS EVO SYSTEM 28 CF. Installation and maintenance instructions. Language: RU, RO | pdf 1.87 Mb
Gas wall-mounted boilers Ariston of the CLAS EVO 24 CF, CLAS EVO SYSTEM 24 CF, CLAS EVO SYSTEM 28 CF series for heating and hot water supply. The passport. Language: RU, RO | pdf 987.40 Kb
Ariston gas wall-mounted boilers of the CLAS EVO 24 FF, CLAS EVO 28 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 28 FF, CLAS EVO SYSTEM 32 FF series. Installation and maintenance instructions. Language: RU, RO | pdf 2.60 Mb
Ariston gas wall-mounted boilers of the CLAS EVO 24 FF, CLAS EVO 28 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 28 FF, CLAS EVO SYSTEM 32 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 990.97 Kb
Gas wall-mounted boilers Ariston series CLAS EVO SYSTEM 15 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 32 FF, CLAS EVO SYSTEM 15 CF, CLAS EVO SYSTEM 24 CF. User manual. Language: RU | pdf 306.18 Kb
Gas wall-mounted boilers Ariston series CLAS EVO SYSTEM 15 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 32 FF. Installation and maintenance instructions. Language: RU | pdf 2.33 Mb
Gas wall-mounted boilers Ariston of the CLAS EVO SYSTEM 15 FF, CLAS EVO SYSTEM 24 FF, CLAS EVO SYSTEM 32 FF series for heating and hot water supply. The passport. Language: RU | pdf 946.87 Kb
Gas wall-mounted boilers Ariston series EGIS PLUS 24 FF, EGIS PLUS 24 CF. User manual. Language: RU, RO | pdf 204.57 Kb
Gas wall-mounted boilers Ariston of the EGIS PLUS 24 FF series. Installation and maintenance instructions. Language: RU, RO | pdf 2.29 Mb
Gas wall-mounted boilers Ariston of the EGIS PLUS 24 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 973.91 Kb
Gas wall-mounted boilers Ariston of the EGIS PLUS 24 CF series for heating and hot water supply. The passport. Language: RU, RO | pdf 934.35 Kb
Gas wall-mounted boilers Ariston of the EGIS PLUS 24 CF series. Installation and maintenance instructions. Language: RU, RO | pdf 1.69 Mb
Gas wall-mounted boilers Ariston series GENUS EVO 24 FF, GENUS EVO 30 FF, GENUS EVO 32 FF, GENUS EVO 35 FF, GENUS EVO 24 CF, GENUS EVO 30 CF. User manual. Language: RU, RO | pdf 446.18 Kb
Gas wall-mounted boilers Ariston of the GENUS EVO 24 FF, GENUS EVO 30 FF, GENUS EVO 32 FF, GENUS EVO 35 FF series for heating and hot water supply. The passport. Language: RU, RO | pdf 991.20 Kb
Gas wall-mounted boilers Ariston of the GENUS EVO 24 CF, GENUS EVO 30 CF series for heating and hot water supply. The passport. Language: RU, RO | pdf 1019.57 Kb
Gas wall-mounted boilers Ariston series GENUS EVO 24 FF, GENUS EVO 30 FF, GENUS EVO 32 FF, GENUS EVO 35 FF. Installation and maintenance instructions. Language: RU, RO | pdf 2.72 Mb
Gas wall-mounted boilers Ariston GENUS EVO 24 CF, GENUS EVO 30 CF series. Installation and maintenance instructions. Language: RU, RO | pdf 2.19 Mb
When carrying out major repairs in cottages and private houses, residents often face the need to replace the existing heating system with a new, more modern and energy efficient one. Today, the market offers a large selection of various options for gas equipment, which differ in power, as well as the fuel used, the manufacturer's brand, structural features etc.
For many years, Ariston double-circuit boilers have been in consistently high demand, which are characterized by exceptional performance and affordability.
Peculiarities
Italian-made gas boilers Ariston are presented in a wide variety of models, however, regardless of the modification, the equipment of this brand is focused on the installation of heating systems on an area of \u200b\u200bno more than 500 m2. Some boiler options work only for heating, while others are used not only to supply heat to the house, but also for hot water supply.
Speaking about the indispensable options for gas boilers of this manufacturer, the following characteristics can be distinguished.
- The presence of a multilingual menu - this allows users to choose the language they are familiar with for effective control of the boiler.
- The "auto" function - makes it possible to adjust the required power parameters offline based on monitoring the actual temperature indicators in the room, as well as inside the boiler.
- Heat and noise insulation - ensures silent operation of the equipment, and in addition, helps to keep the coolant at a given temperature for a long time even after stopping work.
- The warranty for all its equipment, for standard boilers it is 2 years, and for condensing models it is longer - for 3 years.
- Ease and ease of use - the menu is thought out very competently, thanks to which even beginners who have not yet dealt with gas installations can effectively manage the boiler.
- Safety system that prevents breakdowns caused by power outages.
- Built-in electrified elements that maintain the unit's operability and performance even in conditions of reduced water or fuel pressure.
A characteristic feature of all Ariston models is a well-thought-out and deeply technological protection system, which determines the long and uninterrupted operation of the gas installation.
It includes:
- mechanisms for feeding the boiler with water;
- built-in system of timely pumping of accumulated air;
- blocking the circulation pump;
- anti-freeze protection mechanism.
The common parameters of all Ariston models are small dimensions and the ability to supply hot water. The basic package includes: a double-type heat exchanger, a burner control module, a carbon monoxide control system, a mechanism for maintaining a normal microclimate in the room, a device responsible for controlling water freezing inside the heating system.
Characteristic
Ariston gas equipment is produced in two basic versions - floor and wall. In private houses, as a rule, wall models are used.
Depending on the parameters of the model, the unit can have an open and closed combustion chamber. In the first case, combustion products are removed from the boiler in a natural way, in the second case, a forced gas exhaust system works. Typically, closed chamber installations are connected to a coaxial chimney. The coaxial pipeline implies the presence of two structural layers, due to which it is possible to simultaneously remove carbon monoxide and provide fresh air to the furnace.
In addition, the chamber has a built-in fan, which is responsible for the timely removal of burnt gas and hot air. These models are more secure than devices with an open camera.
In addition, they take the air necessary to maintain combustion from outside the living space, this is another advantage compared to closed chambers, since they take oxygen from inside the house, thereby worsening the microclimate in the building.
Floor boilers have quite a lot of power, so they are used for industrial purposes or in residential buildings with a large area. Usually they are designed only to supply heat to batteries and radiators, so if you need to heat water, additional boilers should be purchased.
The main element of any boiler equipment is a burner, which is responsible for burning fuel and supplying heat to the heating system. Burners can be conventional and modulating. More modern and technologically advanced are modulation, since they allow you to automatically adjust the power of the device depending on the results. internal control for the temperature level.
Ariston double-circuit boilers have 2 heat exchangers: the first is necessary to provide domestic hot water, and the second is directly for heating the main coolant. Their manufacture can be carried out in three versions: they are separate, bithermic or with a boiler.
Two autonomous circuits are simultaneously placed in the common boiler body:
- heating - it is responsible for supplying radiators with heated water;
- water - this mechanism is connected to water pipes.
Water heating can be done in several ways:
- flowing - this option only works when using hot water: after passing through the burner, it enters the final consumer in a heated form;
- boiler - such a device implies the presence of an additional reservoir in which water heated to a predetermined temperature accumulates and from there it enters the tap.
A double-circuit boiler operating in boiler mode is more economical.
According to the location of the circuits, boilers are divided into 2 types.
- Bithermic - in such installations, the water pipe is located inside the heating system. The heating circuit in this case heats up more actively and gives off part of its heat to the water supply.
- Duothermic - include two tubular heat exchangers that evenly transfer heat to both systems. In this case, the energy is used most rationally, however, the heating rate is also significantly reduced. In addition, this principle of operation creates the prerequisites for the emergence lime deposits Therefore, such devices need regular cleaning.
Depending on the method of combustion, Ariston boilers are conditionally divided into those operating on the principle of turbocharging and natural draft. A turbocharged boiler has a rather high heating rate, however, gas is also consumed in large volumes. The second type of models heats water rather slowly, but fuel consumption is more economical.
Gas boilers of this manufacturer are most often produced with a capacity of 15, 18, as well as 24 and 28 kW, the most purchased modification is a unit with a capacity of 24 kW, it can provide heat to a living space up to 230 m2.
Pros and cons
Gas boilers Ariston installations popular all over the world this is due to their exceptional performance characteristics:
- effective built-in protection against power surges in the network - devices can operate in the voltage range from 150 to 260 V;
- the ability to effectively control the rate of water heating: in the case when the flow rate does not go beyond 6l / minute, the temperature can reach up to 37 degrees, in order for the water to heat up faster, you just need to increase the boiler power;
- simultaneous operation in the mode of a water heater and an efficient heater;
- the possibility of automatic shutdown of the gas in case of flame extinction, regardless of its causes;
- automatic shutdown of the heater in the event of a decrease in water pressure in the system to a critical level;
- the presence of two heat exchangers;
- a wide range of models;
- excellent adaptation to use in Russian conditions;
- Italian assembly;
- European quality control system.
However, there are also disadvantages, among them are the following:
- very high cost in comparison with analogues;
- use of components made in China.
Russian users highlight the boilers of this brand as high-quality, reliable and practical. Reviews of the owners of private houses point to such advantages of Ariston as compact dimensions, energy-efficient gas consumption and ease of control of the mechanism. Among the shortcomings, the dependence of its operation on the power supply is distinguished, but this feature applies not only to Ariston - almost no gas equipment works without being connected to an alternating current network.
Boilers have an aesthetic appearance, thanks to which they fit into any interiors.
User manual
The first thing to remember before proceeding with the installation of a gas boiler is that only certified specialists should install and connect the device. Self installation is not recognized by the gas services as legal, in this situation the inspection company has the right to cut off the gas supply to the house and impose a fine on the owner of the dwelling. And this is at best, and at worst - the boiler can fail or even explode and cause harm to life, health and property.
Before use, check the level of ventilation- The room where the gas equipment is installed must be well ventilated. Throughout the entire period of operation of the boiler, it is necessary to constantly monitor the water pressure in the heating system. Normally, it is 1.5-2 bar, if the pressure drops, the boiler turns off, and the control display shows an error. In this case, you should make sure that there are no leaks and “energize” the installation.
Even if the installation and connection were carried out by professionals, and the use of the boiler was carried out strictly according to the instructions, there is always the possibility of a breakdown of the device.
