The concept of " running meter” is often found in articles on repair and interiors, and sometimes it confuses a person. In this article we will talk about what a running meter means, how it differs from a square meter and how to determine it.
The concept of "linear meter" is used to determine the length of products and materials in the event that the width is standard or does not matter. It is equal to the usual meter, or 100 cm, and is abbreviated as "lin. m.
In the production of furniture in linear meters measure:
- roll materials - various fabrics, finishing braid, piping;
- piece plastic and wooden products - slats, planks, bars;
- built-in cabinet furniture - kitchens, wardrobes.
When repairing and building in running meters, they also measure:
- rolled metal - corner, channel, pipes and other profile products;
- rolled building materials - linoleum, substrate, geotextiles;
- water, sewer and ventilation pipes;
- wood - a bar, a board;
- fencing, fences;
- cable products.
Note! The remaining parameters of materials and products measured in linear meters - diameter, width, thickness, profile shape - are standard. They are selected in accordance with the project and are not measured when buying.
What is the difference between a running meter and a square meter
Square meters measure the area of a surface or material. To calculate the area of a material, you need to multiply its length, expressed in meters, by the width, also in meters.
Recalculation from linear meters to square meters may be required if the project measurements are carried out in linear meters, and the price of the material is indicated per square meter.
Calculation example
According to the project, it is necessary to buy 5.5 linear meters of material 240 cm wide, the price of the material is expressed in square meters and amounts to 300 rubles. per m 2. It is necessary to calculate the total cost of the material.
- The first step is to convert centimeters to meters. To do this, all values in centimeters must be divided by 100. The width of the material will be 240 / 100 = 2.4 m.
- The length and width of the material in meters must be multiplied. The area of the material will be 5.5 x 2.4 = 13.2 square meters a.
- The resulting area of the material must be multiplied by the price of the material: 13.2 x 300 = 3960 rubles.
In square meters, not only the material can be measured, but also the cost of any finishing works– cleaning, painting, upholstery of furniture. In this case, measure the width and length of each of the surfaces to be trimmed, multiply them, and add the results obtained.
Linear meter of fabric and other roll materials
To measure a linear meter, you can use any measuring tool - a tape measure, a folding or wooden meter, a centimeter tape. On some materials, for example, decorative films, markings are applied from the inside, according to which you can measure the desired length without a tape measure.
The markings on the tool or materials, as well as the dimensions on the drawings, may be indicated in other units of measurement, they must be converted to meters according to the table.
Table. Converting various units of measurement to linear meters.
Having picked up the material of the desired width and configuration, proceed to the measurements. Rolled materials are laid out on a flat surface and measured right amount running meters, and then cut off.
Linear meter of piece products
Piece products - various strips, slats, skirting boards - usually have a standard length. To purchase the required number of piece products, you must:
- find out the standard length of the product;
- the total number of linear meters for the project divided by the standard length of the product;
- Round the result up to an integer.
Calculation example
According to the kitchen project, a wall plinth is required in the amount of 7 linear meters. The standard length of the plinth is 2 m. It is necessary to determine the required number of bars.
- The total number of linear meters is divided by the standard length of the bar: 7/2 = 3.5 pcs.
- The result is rounded up and get the required amount - 4 pcs.
Note! Sometimes the length of piece products is non-standard, for example, when buying wooden bars, slats. In this case, each selected unit of the product is measured and the values expressed in meters are summarized.
Manufacturers of kitchen furniture often indicate its base cost not per set, but per linear meter. Thanks to this conventional unit, when compiling individual project can be quickly calculated approximate cost the entire kitchen, multiplying its estimated length by the price for 1 linear meter. m.
Video - Linear meter of the kitchen
The basic package of the kitchen usually includes a set of cabinets and cabinets of standard height with the simplest finish, as well as the minimum necessary fittings. When drawing up an individual project, the cost per linear meter of a kitchen may change.
The basic package does not include:
- built-in appliances;
- sink and mixer;
- hood;
- cornice, lighting panel;
- wall panels, apron;
- wall plinth.
Postforming countertops can also be calculated separately, not by the number of linear meters of the kitchen, but by the number of plates used for its manufacture, this nuance also needs to be clarified with the manufacturer.
The final cost of the kitchen is also affected by:
- Non-standard width and height of cabinets and cabinets;
- additional fittings, accessories;
- the choice of other fittings, facade decoration, countertop material;
- calling specialists to install the kitchen and other additional services.
Video - What affects the cost of the kitchen
Note! Modules with hinged doors on cabinets and cabinets cost 1.5-2 times cheaper than similar cabinets with drawers and facades with lifts.
Technology for calculating the kitchen by linear meters
For the calculation, you need a plan of the room indicating the dimensions, as well as the price of 1 linear meter. m. kitchen of the selected model.
Step 1. Choose a way to arrange furniture depending on the size and layout of the room, as well as personal preferences.
Kitchen furniture layout plan Total length of kitchen furniture Calculation of the total length of the kitchen Step 4 Multiply the specified length of the kitchen by the base price per linear meter of the selected model. Keep in mind: if the length of the lower and upper parts of the kitchen is different, then it is better to calculate their cost separately. At the same time, the "bottom" of the kitchen is taken as 60-65% of its total cost.
Note! Custom-width modules tend to be more expensive, as they require reconfiguration of equipment to produce.
The concept of "linear meter" often confuses people. Although there is nothing mysterious, and even more terrible, in this phrase. Consider several options where this concept can be applied, and learn how to calculate the required number of running meters.
A running meter is the usual length in meters, but taking into account the width of any finishing or household material (carpet, linoleum, plastic or vinyl film). Let's say you have a room 4.5 meters wide and 6.0 meters long, and you are going to lay new linoleum in this room. In the store, you need to choose a material that is suitable in quality and pattern and be sure to pay attention to the width of the rolls. Linoleum width can be 1.5 meters, 2.0 meters or 2.5 meters. Since the width of the room is 4.5 meters, in order to cover it with linoleum, you will need to put a few pieces. It can be three pieces of 1.5 each (1.5m * 3 = 4.5m) or two - one with a width of 2.0 and the second - 2.5 (2.0m + 2.5m = 4.5m).At least three pieces of a smaller width, at least two of a larger one, should correspond in length to the length of the room (6 meters). This means that in order to cover a room with linoleum 1.5 meters wide, you need to buy 18 linear meters (6 * 3 = 18). If you decide to lay linoleum with a width of 2.0 and 2.5 meters, then you only need to buy 12 linear meters - 6 meters with a width of 2.0 and 6 meters with a width of 2.5 (6 + 6 = 12).
Any other rolled floor coverings are also sold in running meters. But to cover the floor with carpet, it is enough to buy as many linear meters as the length of the room. Carpet is usually not joined, as is done with linoleum flooring, so you need to choose the width that completely covers the floor.
By linear meters you can buy both a film for finishing greenhouses and a film for pasting any surfaces. You can calculate how much material is needed for pasting, for example, a door, in the same way as for laying linoleum. But in order to buy polyethylene for a greenhouse, you first need to draw on paper all its parts separately on a scale. Next, calculate the lengths and widths of all individual parts, and then calculate the running meters.
If you are going to buy ready-made kitchen furniture - it is also sold in running meters. You will only need to add up the lengths of all the walls along which the kitchen will be installed, and then only choose the appropriate furniture option. In the case of kitchen furniture, in addition to the standard width, the cost per linear meter will include kitchen facades, internal shelves and drawers, as well as fittings. Please note that the cost per linear meter does not include the cost of the hob, oven and dishwasher.
Running meters are considered to be a variety of cornices and pipes - all those materials that require docking with each other. And in running meters, any fences, for example, metal fences, are considered.
In order not to make a mistake with the calculation of linear meters, it is better to come to the store with a drawn room plan. It should indicate the length and width of the room, and if it is a kitchen, then the height and location of windows and doors. Good luck with the calculation and repair!
Running meter - how much? This is an analogue of the usual meter. The linear meter is used when measuring length in situations where the indication of width or height can be neglected for one reason or another.
In construction, there is such a thing as a "linear meter". For many, this measure of length remains a mystery for a long time. We hasten to reassure you, there is nothing terrible here, except for the expression itself.
Let's try to understand this concept and learn how to correctly calculate the required number of running meters.
Running meter. How much is this?
This measure of length measures what is twisted into a roll: linoleum, corrugated board, fabric, carpet. This concept is also used to measure the amount of material needed in construction or it means the amount of work to be done. For example, a running meter of a kitchen, a pipe, a plinth, a fence, a tile, a foundation, and so on.
Frequently asked Questions
How many mm in a linear meter?
As already mentioned in our article, to calculate a running meter, the length of the material is required, since the width is already fixed and can be different. That is, in 1 meter 1000mm of the length of the product.
How many linear meters per ton of rebar?
Calculating the amount of reinforcement for the foundation in running meters. The measure of the amount of reinforcement is a ton. Therefore, you need to convert a linear meter into tons and even then look at the price. But how many meters of reinforcement are contained in a ton depends on its diameter: the thinner the reinforcement, the more meters in a ton.
Let's say you need lumber. In one square meter there can be a different number of linear meters for different materials (edge board, floor board, lining). This is because the number of square meters also depends on the width of the material.
For instance:
The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. You need to calculate as follows:
Divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of linear meters.
1 sq.m. / 0.120 m = 8.33 l.m.
How much does a running meter of paint cost?
Most often, painters consider the volume of their work in square meters. That is, the length multiplied by the width of the surface.
One "linear meter" is equal to one meter?
Example - Structural Measurement
The second option for measuring the structure along the contour (outlining line) is chosen to calculate the cost of the work.
The length of the structure is measured with a tape measure.
What calculations are made in linear meters,
which ones are square?
If the amount of laminate, parquet or ceramic tiles required for flooring is calculated in square meters x, then the amount of linoleum or carpet is calculated in p / m.
The consumption of plaster, putty, primer, paint is calculated in kilograms per square meter. The consumption of wallpaper or drywall is calculated in p / m. To calculate the cost of work, calculate the cost of work per square meter.
The calculation of wallpaper for wall covering is similar to the calculation of linoleum.
On the calculator below, you can calculate the dimensions of window slopes, which are taken into account when calculating the cost of repairs and purchasing consumables.
We are all accustomed to consider the unit of measurement of distance or length - a meter. Then what is a running meter? How is it different from the usual? Yes, basically nothing. In running meters, it is customary to measure the length of any material. At the same time, its width or height is not taken into account. They are either standard, or, when measured, they do not have a significant value.
What is measured in linear meters
In running meters, you usually measure the fabric in the store. With a width of 1.5 m, a piece of fabric 1 m by 1.5 m will be considered a linear meter. If you buy pipes, then, regardless of their thickness, the length of the pipe will be measured in linear meters. So is the electrical cable. It doesn’t matter at all what its cross section is, whether it is thick or thin, the price for it is indicated per linear meter. The same situation is with skirting boards, linoleum, various heaters and seals, etc. And when the cost of a kitchen is calculated in running meters, what do you mean?
What is a running meter of a kitchen
In this context, the linear meter is used, rather, as a conditional value. For the convenience of calculations, it is considered that a linear meter of a kitchen is the furniture that is installed along a wall 1 m long from floor to ceiling, according to the design project. It can be tables, shelves, cabinets and other modules. Usually, the cost of the kitchen is indicated as such - per linear meter. It is so convenient to immediately calculate its approximate price by multiplying the length of the wall along which it will be located by the cost of one linear meter of the kitchen.
Each of us at least once in our lives had a chance to make repairs or purchase new furniture. And quite often, when buying certain building materials, we heard about such a unit of measurement as a running meter. Such a concept confuses almost everyone, and it is rather difficult to immediately determine how this value differs from a square meter. You cannot find out what a running meter is from a dictionary, because this concept was invented by manufacturers of goods. But in this material we will understand what this unit of measurement is.
This parameter represents the usual length of one meter for products with a certain width, such as fabric or linoleum. And it is much easier to calculate the cost of goods in linear meters than in square meters. For example, you need to buy a piece of carpet of a certain length with a width of 2.5 meters. In this case, calculate square meters it will not be very convenient, because it will be necessary to calculate the area of \u200b\u200bthe product, and then divide it into squares. In general, to carry out rather complex mathematical calculations.
With a running meter, everything is simple and in order to find out the cost of the goods, you just need to multiply this unit of measurement by the length of the segment.
The linear meter is most often used to calculate the cost of such goods:
- the cloth;
- linoleum;
- carpet;
- finishing film and polyethylene for greenhouses;
- electrical cable;
- finished furniture;
- various cornices and pipes;
- railings and metal fences.
Most consumers believe that only roll materials can be calculated in linear meters. And such an assumption cannot be considered absolutely wrong, because in most cases we are faced with this measure when buying similar products with a specific width. But running meters quite often calculate the cost of furniture.
Let's consider an example for clarity. The furniture manufacturer roughly calculated that to fill the kitchen with a length of three meters, taking into account all the cabinets, shelves, doors and fittings, it would be necessary to use materials worth 30 thousand rubles. This means that one meter of furniture will cost 10 thousand - this cost is the price per linear meter. And thanks to such simple mathematical calculations, the manufacturer can immediately indicate to the customer how much this or that set of standard sample will cost him.
But there is one nuance here, the cost of a running meter includes the price of the most cheap material and accessories, and sometimes the latter, in general, are not taken into account. So if you see a too tempting offer, then you should learn more specifically about the content of the product. After all, this technique is often used only to attract new customers.
We know about what this unit of measurement is from the school desk. And remember that a square meter is needed to measure the area of various figures. And in fact, this measure is relevant for measuring any building materials and furniture. And if the width of the product practically does not affect the linear meter, then for a square this value is of great importance. For example, you need to lay linoleum in a room with a length of 3 meters and a width of 2.5. By simple mathematical calculations, we find out that the cut is 2.5 * 3 = 7.5 square meters.
This unit measures:
- area of the room;
- area of flooring surfaces;
- area of facing materials;
- area occupied by furniture.
As for furniture, this unit of measurement is especially relevant for small kitchens, where the area of \u200b\u200bthe headset plays a very important role.
Quite often, when buying certain materials, we need to convert one unit of measure to another and vice versa. But how to do this, because a linear meter is, in fact, a unit of length, while a square meter is an area. Do not despair, because it will be much easier to do than it seems.
In order to convert a linear meter to a square meter, you will need to know the exact width of the product, which the manufacturer takes as standard. And if everything is quite simple with the calculation of linoleum or carpet - we divide one linear meter by the width of the product and get the number of square meters, then with the calculation of furniture you will have to tinker a bit.
For example, in order to find out how many "squares" are contained in a standard kitchen 5 meters long. You will need to measure the width of the floor units, not the height of the kitchen unit. Let's say it is standard 60 cm (0.6 meters). Now you need to multiply these parameters among themselves: 5 * 0.6 = 3 square meters. In this simple way, you can calculate the area occupied by the kit and measured by "squares".
Everything is measurable. It is a fact. But the values used are different. Most of the products that are rolled up, which relate to fittings and kitchen products, are today measured in linear meters. To be more precise, a running meter is how many meters in length. The width is not taken into account.
In one store, these stripes are in this form. But in the other there is just one wide strip of 3 meters long 10 meters. In essence, this is what we need. Since the cost is indicated in linear meters, in the first store we will pay three times more than in the second. The savings are huge!
Remember, 1 linear meter is 1 meter of the product in length. And then it doesn't matter what the width is. The price will not change.
Carefully!
Very often, only the number of linear meters and the price are indicated in the product information card. This means that we do not know anything about the width of the product. If you buy everything in a store or market, you can bring your own tape measure.
On the Internet, such data is often hidden. You can not order a product without making sure of its parameters. It is worth calling the store and find out its width.
When you find two identical items with different prices, do not rush to order the cheapest one. It is possible that the width of that product will not suit you.
Marking the fabric is a matter, although not simple, but accurate. With kitchens, which are also measured in linear meters, everything is much more complicated. Usually, we take into account 1 meter of standard headset. That is, simple cabinets and tables are always used for miscalculations. All additional decorative elements are negotiated separately.
If you buy a ready-made kitchen, then information about running meters is not particularly important. You already see the finished price tag and decide whether the price is right or not. But at individual orders everything needs to be carefully considered.
It is important to emphasize that you can never know the exact amount in advance. We can only judge the minimum cost of 1 linear meter of your future kitchen.
There are two popular situations in which the answers are completely different:
1. Accurate calculation. You order an ordinary kitchen, where all drawers, cabinets and tables have standard sizes. You don't change anything. The final price may differ slightly from the planned one.
2. Completely inaccurate calculation. The kitchen is completely original. All cabinets and drawers are designed for your convenience and size of dishes and furniture. The headset fits exactly into the design of the room. The final price may be several times higher.
Why is the total going up?
It is difficult to translate linear meters. And for the sake of a new idea, you have to put up with the pricing policy. To cut costs, it is worth connecting different components. That is, it is necessary to use as many standard elements as possible, diluting them with custom ones. So you get a kitchen that fits well into the interior, and save your budget.
Don't forget that different materials and designer stuff increase the cost. One linear meter of a locker can become more expensive if you decide to install not 4, but 5 drawers in it. Each detail requires additional expenses. Carving or decorative stickers are far from cheap.
Alternative to running meter
Many shops calculate the price based on ready-made kitchens. You choose the model you like, see its price, and then change it a little, if necessary. In such cases, it is easier to evaluate a future purchase.
As a result, we see that a linear meter is a value by which many goods are measured, from fabric to kitchen. It defines the length without specifying the width. In order not to make a mistake in the purchase, you need to clarify all the points. If the Internet refuses to tell you the width, then it's not worth the risk. After all, you can just lose your money.
Almost every person must have heard the expression "linear meter". For many, this definition remains quite complicated, since it is not at all clear what is the difference between sq. m. from the usual. What is the conversation about?
One linear meter equals the usual length of one meter. It is used to measure goods that have a certain width, for example, linoleum. It is much easier to calculate the cost of goods, taking running meters as a basis, than to calculate the cost of a square one.
For example, you need to buy carpet in the store, 2.5 wide and a certain length. Make a calculation of 1 m2, such a segment is not very convenient. To do this, you need to determine the area of \u200b\u200bthe product. Then divide it into squares. In other words, it is necessary to perform complex mathematical calculations.
It's much easier to do calculations on a per-square basis. To determine the cost of the goods, you will need to multiply the length of the segment of the carpet by the number of meters.
There is a fairly large list of goods in which the cost is calculated by the number of running meters. These include.
- Fabrics.
- Linoleum.
- Carpet.
- Finishing film.
- Roll polyethylene.
- Electric wires.
- All kinds of pipes.
- Various fences.
- Fences.
Furniture calculation
A lot of consumers believe that the calculation by running meters applies only to rolled materials. However, this opinion is not entirely correct. When buying a product, we often come across a certain roll width. Linear very often determine the cost of furniture.
To make it clear, let's look at the following example.
The furniture manufacturer made an approximate calculation. To completely fill the three-meter kitchen, taking into account all the details of the furniture, he will need 30,000 rubles. Therefore, the cost of 1 m of furniture will be 10,000 rubles. In other words, such a cost will correspond to the price of one running meter. Based on such fairly simple mathematical calculations, the furniture manufacturer can tell the customer what the cost of a set of furniture of the corresponding sample will be.
However, it is necessary to take into account one important nuance. When calculating the price m, only the cost of the cheapest fittings and material was taken into account. Sometimes the cost of fittings is not included in the calculation at all.
Therefore, if a very tempting offer is made to you, you must definitely find out what material the product is made of, what accessories are installed on it. In this way, quite often attract new customers.
How many mm in a linear meter
As already mentioned, one linear meter is equal to one standard meter. From this it turns out that there are 1000 mm in 1 linear meter.
cheat sheet
So, to make it easier to deal with units of measurement, they can be summarized in one table, in which their ratio will be visible, and it will be quite easy to convert one unit to another.
What does the term "square meter" mean?
This unit is designed to calculate the area of a square, in which each side will be 1 meter. To determine the size of the area, you need to multiply the height and length of the product. For designation, the short form is used - sq. m.
Today, this unit is found in our lives almost everywhere. The most obvious example is the dimensions of a dwelling. In other words, if we are talking about an apartment of 16 m2, then the floor area is equal to this value.
The square meter is most commonly found in the construction industry. To determine the area of a wall that is 6 meters long and 4 meters high, simply multiply six by four. It turns out that the area of \u200b\u200bthe wall is 24 m2.
