How to glue wallpaper delight on the wall. How to stick photo wallpaper on a wall with wallpaper: materials, tools, sequence of work

How to properly glue photo wallpapers on the wall, since they will attract the eye when you first examine the room. Think carefully not only color solution, but also what you want to see on them.

Wall murals are one of the strongest design tools that can drastically change the appearance rooms. But at the same time, you can spoil the interior. Therefore, it is necessary to know not only what to choose, but also to be able to competently glue photo wallpapers.

Today we will talk about how to properly glue photo wallpapers so that they look good in the future. Wallpaper can be pasted alone, here.

Helpful information:

Tool

  1. Bucket or bowl for glue.
  2. Clean rag to remove excess adhesive.
  3. Tape measure, pencil or ruler.
  4. Roller or brush for applying glue.
  5. Spatula, knife, scissors.

How to choose glue

  • You can choose glue and our production. In terms of quality, it will be the same as imported, but cheaper.
  • The glue must be moisture resistant and must not have strong odors when the package is opened.
  • It is necessary to dilute the glue according to the instructions. Read it right on the package. One of the rules is the thicker the wallpaper, the thicker it is necessary to make the adhesive mass.

Wall preparation

It is necessary to glue photowall-paper only on a flat, dry and clean surface. Each tubercle on the wall will be visible through thin photo wallpaper. So .

If the walls are even, then they must be carefully removed and switches, sockets, if any. When sticking photo wallpapers in the room, doors and windows should be closed to prevent the slightest draft during work and within a day after its completion.

Important! You can not glue photo wallpaper on old wallpaper, as over time the pattern from the old wallpaper will appear. If the photo wallpapers have light colors, then it is recommended to paint the walls in the same tone, or just white water-based paint.

How to mark a wall

The first step is to spread the sheets on the floor and combine the edges to get a single picture. The wall murals on the wall must match perfectly at the seams, so marking the wall is very important in the process of gluing.

Start from any of the top corners. Using a ruler, plumb line, and pencil, mark the location for the first piece. Between the horizontal and vertical lines, you should get a strictly 90 degree angle. in the same way, we mark up each of the fragments along the entire wall.

Step-by-step process of gluing photo wallpaper

  • Via sharp knife and rulers we cut off the white fields on the extreme fragment of the photo wallpaper.
  • We lay each fragment correctly on a clean floor front side down. The first fragment should be the top one.
  • Apply glue with a brush or roller. Make sure there are no lumps of glue. If there are any, we remove them immediately. You can also coat the wall with glue.
  • Exactly according to the markup, we glue the first fragment of the photo wallpaper on the wall and, starting from the center, carefully smooth it out with a rag or roller. Wipe off any excess adhesive with a clean cloth.
  • Carefully and accurately combining the pattern, we glue the remaining fragments. In those places where there was a socket or switch, carefully cut out circles.

It is necessary to apply on glued photo wallpapers protective layer from ultraviolet light so that they do not lose their bright colors.

Is it easier to stick self-adhesive photo wallpapers?

Most people think that self-adhesive photo wallpapers are much easier and faster to decorate a room. However, it is not. Gluing photo wallpapers on glue is easier, since after gluing to the wall you can not only trim them if necessary, but also take them away and reapply the glue to glue them. With self-adhesive wallpaper, the situation is different.

It often happens that the fragment does not even have time to convey to the wall, as it accidentally twisted and stuck together. It is practically impossible to unstick self-adhesive photo wallpapers without damaging the pattern.

Once you separated protective film from self-adhesive, you need to quickly and accurately stick the fragment on the wall. It is very difficult to do all this qualitatively and quickly, especially for an unprepared person.

If you pasted the fragment and the result was wrinkles, then you will not smooth them out in any way. Especially if you decide to glue photo wallpapers on the ceiling, then this is generally without options.

Video on how to glue wallpaper with high quality

How to glue photo wallpaper correctly with a video example.

Wallpapering walls with photo wallpapers. When sticking photo wallpapers, there is a certain instruction that helps to do everything right and achieve an excellent result. First of all, it is necessary to prepare improvised materials that are necessary for this work:

1. Bucket, which is needed to mix the glue.
2. Non-synthetic photo wallpaper glue package. It is best to choose a natural-based glue.
3. Brush, which will be needed to apply glue.
4. Roller for smoothing wallpaper.
5. A stationery knife in order to neatly trim the edges of the wallpaper.
6. Roulette for measuring the wall.
7. Level.
8. Spatula.
9. Pencil.

Before you start, you should make sure that the surface of the wall is even, smooth, cleaned and ready to work, see. Do not forget that the wall must be absolutely dry - this is very important. Your wall should not be left with old wallpaper and bumps. If they exist, then you should get rid of them with a spatula. An equally important factor is that the temperature of the room where you are going to glue the photo wallpaper should be at least twenty degrees. Remember that you must completely eliminate drafts, otherwise you risk getting a far from ideal result of your work, as the wallpaper may not dry evenly, wrinkle and stretch in some places.

Go ahead. Lay out the picture panels on the floor to see the full picture. Now you should compare the dimensions of the resulting image with the dimensions of your wall. Next, using a pencil and a level, mark the wall on each part of the drawing, so you can achieve the best result and the correctness of the image. Moreover, it will be easier for you to glue the panels. Now the walls are covered with wallpaper.

Now you can mix the adhesive according to the instructions on the package and apply it with a brush to the first panel. If your wall surface is not smooth, but more porous, then you may need to apply several coats of adhesive. Next, evenly along the outlined lines, attach the first panel to the wall, and, using a roller, glue it, carefully smoothing it. Smooth the panel from the center to the edges. Do exactly the same work with the second, third and fourth panel.

Starting to glue the fifth panel, you should pay close attention to ensure that the picture matches. To do this, you need to lightly lay the fifth panel on panel number one (this is about five millimeters). Therefore, panel six, seven and eight must be superimposed on subsequent panels so that the resulting pattern completely coincides and corresponds to the intended result. It is necessary to carefully wipe off all the glue that has got on the front side of the photo wallpaper with a dry and clean rag. If it becomes necessary to trim the edges of the photo wallpaper, then this should be done only after the glue and the photo wallpaper are completely dry. To do this, you should use a clerical knife prepared in advance.

Before you start applying the photo wallpaper panels to the wall, it should be treated with glue. After you have applied the glue to the surface, you need to wait a bit until the glue is partially dry. This is necessary so that all unnecessary moisture is absorbed, but the wall remains sticky. The photo wallpaper panel must be carefully placed on the wall, which is smeared with glue, and make sure that part of the photo wallpaper coincides with the line drawn in advance. A very important tip is to press the wallpaper from the center and evenly smooth it to the edges with a roller. Each next part of the photo wallpaper must be glued either exactly end-to-end or overlapped, that is, follow the instructions of the wallpaper that you have chosen for yourself - this will help to achieve the perfect result upon completion of the work. Do not worry too much if you suddenly see small bubbles on the surface - they will definitely go away after the glue dries, they are not picky if you follow the pasting technology.

Video how to glue wallpaper on the wall

Photo drying time:

The drying time of the glue and photo wallpaper depends very much on the humidity of the air and the temperature of the room where this work takes place. If the room is dominated normal conditions, then the adhesive layer can dry in just three and a half hours. But it must be remembered that after applying the adhesive layer to the wall, installation of photo wallpapers should be done no more than three and a half hours later.

But after applying the glue, the wallpaper and the wall must dry for at least one hour. The use of infrared rays or hot air can significantly reduce the drying time, but not more than sixty degrees.

Cleaning the surface of the photo wallpaper after sticking to the wall:

In order to remove the liquid glue that remained on the front side of the photo wallpaper and at the joints after gluing them to the wall, you must use water or a soapy solution. If the glue is already dry, then you should resort to using ethyl alcohol or acetone. But it is very important to do this carefully, as these substances can damage the surface of the photo wallpaper.

If you did not adhere to the rules of the photo wallpaper application technology, after which you developed deformations and bubbles, then this case is not considered a guarantee, and such photo wallpapers are not subject to exchange.

Color scheme - how to choose the color of the walls for photo wallpaper:

Wall mural - flowers on the wall.

Very often, photo wallpapers are associated with the earth, the sun, the hearth, and fire. Cold colors when choosing photo wallpapers are considered to be green, blue, cyan, blue-green and all kinds of shades of these colors. Some colors that are printed on the wallpaper panels can give the impression of an object approaching or receding. It is important to know that if warm colors predominate in a room, then it visually decreases, and, therefore, for small rooms it is recommended to choose wallpaper in cold colors, thereby you will optically enlarge the space.

Colors that can create a feeling of proximity to an object, as well as increasing its volume, are:

1. Orange.
2. Brown.
3. White.
4. Red.
5. Pink.

Colors that visually reduce the volume of an object and create a sense of its remoteness are:

1. Gray.
2. Black.
3. Blue.
4. Purple.
5. Blue.

As for the green color, it belongs to neutral tones, which means that it cannot affect either the removal or the approach of the object. All this is very important when choosing photo wallpaper, because it is worth considering what you and your home need. But do not forget about the relevance of the image, that is, where it will be located - in the bedroom, living room, nursery, office, and so on. See. Now you can start, because you already know how to glue photo wallpapers on the wall correctly and we hope you watched the video tutorials.

And in conclusion, briefly the whole sequence of actions:

Let's go through the gluing technology again, because it is worth remembering that this technology consists of several stages:

1. Cleaning the wall surface.
2. Measuring the wall and matching its dimensions to the dimensions of the drawing.
3. Removing the plinth. Appropriate temperature and draft free.
4. Laying out the drawing in accordance with the required image.
5. Outlining lines on each photo wallpaper panel.
6. Glue preparation.
7. And, directly, the wallpaper itself.

Another thing worth knowing is that in order to avoid visual reduction of the room, you should step back from the ceiling about five or six centimeters. Do not forget that you should press and smooth the photo wallpaper from the center to the edges. And also remember how to stick photo wallpaper on the wall correctly - glue each part of the photo wallpaper should be in accordance with the technology of your type of photo wallpaper, that is, either exactly butt or overlap. Helpful video and good luck!

Admire the landscape of your favorite painting or wake up every morning on the picturesque ocean shore, being in your apartment, perhaps with the help of photo wallpapers. Tastefully selected photo wallpapers will visually enlarge the space and help create the desired atmosphere in any room. Sticking such wallpaper is almost no different from installing ordinary ones.

Before gluing, close all windows to prevent drafts. For work you will need: glue, a rubber roller or spatula, a stepladder, large and small brushes, a plumb line or level, a stationery knife and a clean rag. Make sure the walls are well prepared. The surface must be smooth, clean and free from roughness. Remove the remnants of old wallpaper, hooks and hammered nails, carefully repair cracks. Ideally, the walls should be leveled and puttied.
Absolutely smooth walls are rare. Use a plumb or level to stick the wallpaper evenly. Draw a straight, vertical line on the wall where you plan to start.


On the floor, previously covered with newspapers or film, lay out the photo wallpapers in the order that forms the desired image. In order not to get confused when gluing, put sketchy numbers on the wall with a pencil corresponding to the sequence of sheets. It is most convenient to glue the wallpaper from right to left.


Choose the right adhesive for the wallpaper. In the instructions of the purchased photo wallpaper there will be recommendations on which glue is suitable. It must be thoroughly mixed without leaving lumps.


The method of applying glue depends on the type of photo wallpaper. Cover paper photo wallpapers evenly with glue using a brush, paying particular attention to the edges. Without folding them, leave them in this form for 3-5 minutes so that the glue is well absorbed.
Non-woven or vinyl photo wallpapers should not be covered with glue. Using a wide brush or roller, apply the adhesive evenly and thoroughly to the wall itself. Usually glue dries within 3 hours. During this time, you need to have time to paste all the wallpaper. Sticking self-adhesive wallpaper will require good skill. Remove the protective layer and get to work immediately, because the glue applied to the wallpaper dries very quickly. It is important to glue such panels accurately evenly, since any deformation is practically impossible to correct. Take the first panel of photo wallpapers. Stick the panel from the floor to the ceiling, parallel to the line marked with a plumb line. Remove the resulting air with a rubber spatula or roller, gently smoothing the surface from the center to the edges. Remove excess glue with a damp cloth.


Proceed to gluing the next sheets. If the drawing requires it, overlap the wallpaper panels, smearing the joints with the previous sheet with a small brush. When all parts of the photo wallpaper are pasted, cut off the excess parts of the wallpaper near the floor and ceiling with a clerical knife. Do not open the windows in the room until the glue has completely dried, according to its instructions.


Installing photo wallpapers is an economical and easy way to give a familiar space a special and unique look. Qualitatively pasted photowall-paper will become a unique and durable decoration of any room.

The content of the article:

Wall murals are a very interesting material for wall decoration. They are able to give a special flavor to any room and immerse its inhabitants in an atmosphere of comfort and amazing sensations. Using modern technologies the process of pasting the surface becomes not so much difficult as more and more exciting. For this reason, many home craftsmen prefer to do this work on their own, saving a significant part of the family budget. Today our article will tell you how to properly glue photo wallpapers on the wall.

The main types of photo wallpaper for walls

Wall murals are made by printing a picture on a suitable basis. It is difficult to list all types of these products, which differ in the way of sticker, type of image, base material, purpose, texture and many other parameters. Consider the classification of photo wallpapers according to the main features.

Wallpaper base material

According to the material that is used as the basis for production, wallpapers are divided into the following types:

  • paper wallpaper. This finishing material has a cellulose base, which has excellent hygroscopicity, excellent color transfer, but is very sensitive to moisture and can fade in the sun. Paper photo wallpapers differ most affordable price but they are short lived.
  • Vinyl wallpapers. They are made by applying a polymer coating to a vinyl or paper base. In the first case, the material is more resistant to moisture, in the second - it is more convenient to install. In both cases, the wallpaper pattern does not get worse over time.
  • Non-woven wallpaper. They have a base consisting of modified cellulose fibers with the addition of polyester. In the manufacture of photo wallpapers, a vinyl layer is sprayed onto it. The material is good in that it is able to be corrected in case of an unsuccessful location of the canvas. Such photo wallpapers do not wrinkle, do not fade and are easy to clean, while their pattern does not deteriorate at all. The moisture resistance of the coating allows you to endure even pipe leaks.
  • Fabric wallpaper. Their appearance is simply excellent, despite the fact that this material is very capricious and expensive. It is made from natural fabrics: cotton, silk or linen.

The structure of the photo wallpaper


The classification of the material is also carried out depending on the structure of the surface. On this basis, there are such types of photo wallpapers for walls:
  1. smooth wallpaper. They have glossy and matte surfaces. Wallpapers of the first type have a shine, a photographic image looks great on them, the structure of matte wallpapers highlights the picture well.
  2. Embossed wallpaper. They often imitate the pattern of wood, leather, stone and other materials. For relief, the material requires a thick base, so interlining and vinyl are used as it.
  3. Wallpaper "canvas surface". Such material is ideal for the artistic depiction of objects and the creation of reproductions.
In addition to the wallpapers listed above, manufacturers offer finishes that mimic the structure of a mat, frost, and even clay tiles. A special offer from them is a laminated coating of non-woven and vinyl materials to protect their surface from mechanical damage.

Type of pattern on photo wallpaper


The drawing can be made in the form of an ornament, a landscape, a photograph, an abstract holographic pattern, or a reproduction of a painting. You can use ready-made wallpapers or make them to order.

By type of image are:

  • Wallpaper. They are a common background image.
  • Subject wallpaper. They have one specific object - an animal, a flower, a portrait, and so on.
  • panoramic wallpaper. Most often, landscape is applied to them.
  • Three-dimensional murals 3D for walls. They have a holographic image that has a three-dimensional effect. This type of decoration prevails in interiors made in modern styles.
Many photo wallpapers have a fluorescent effect.

Wallpaper location


When glued, they can occupy a certain part of one wall or the entire wall or even two, forming an original panorama. The placement of photo wallpapers can drastically change the impression of a room.

It can be:

  1. Zonal. In this case, the canvas occupies only part of the wall and may look like a tall vertical fragment or picture. This method of arranging photo wallpapers is usually used to visually raise the ceiling.
  2. Modular. The image here also occupies part of the wall and consists of small elements. Usually there are several of them, most often it is a triptych.
  3. Angular. In this case, the image occupies two adjacent walls.
  4. Panoramic picture. Occupies the entire surface of the wall. It may consist of a single canvas or several of its fragments. In the latter case, the work of creating a panorama is complicated by the scrupulous execution of joints for the exact match of the individual drawings of the picture.
Photo wallpapers may differ in the way they are pasted. Ordinary wallpapers fixed on the walls with a special glue. For paper stickers, it is applied to the base and the back of the prepared canvas, when installing vinyl and non-woven fabrics - only on the wall. However, there are also self-adhesive wallpapers. They have a vinyl base and a layer of polymer adhesive, which is applied by the manufacturer to the back of the material. The adhesive layer is protected by special paper. To paste such wallpaper, you just need to remove it.

Features of the choice of photo wallpaper on the wall


The main thing in choosing photo wallpaper is to correctly determine storyline, in harmony with the style of the room, and the optimal size of their canvas. They may consist of one or more panels. The greater the number of panels, the larger the size and, accordingly, the higher the price of the wallpaper.

For example, 2-panel murals 190x135 will cost about 1000 rubles, 3-panel murals with a size of 295x135 - 1400 rubles, eight-panel murals 380x270 - from 1800 to 2200 rubles. However, it must be taken into account that all this standard sizes photo wallpapers on the walls, and they have quite approximate cost, which may vary depending on the quality of the canvas and the pattern applied to it.

Photo wallpapers made to order are more suitable for building an original drawing. In this case, you can not limit yourself to the size of factory panels. In specialized firms, they will be printed according to the sizes provided by the customer.

Mini photo wallpapers consist of one canvas. Their big advantage is that they are seamless, and their installation does not require the joining of any component parts. Such wallpapers can have standard sizes and under the order. If you order a square-shaped mini-murals, for example, 250x250 cm, they will look great on a square wall with natural side lighting. Small canvases are great for small rooms.

To create an extravagant and stylish interior it is not at all necessary to use wide format canvases. You can buy 2 or 3-panel narrow murals that will visually lengthen the wall and create a bright interior accent in the room.

Huge and colorful panels in small rooms visually reduce the already small size of the rooms. For these cases, you should buy small-format samples.

Narrow photo wallpapers can mask the small flaws of the room, emphasize its dignity and add grace to the interior. Vertical canvases on the door create the effect of increasing space.

Horizontal photo wallpapers are suitable for hallway decor if you mirror opposite walls. The most popular option for using such canvases is pasting a kitchen apron.

Wall mural large sizes fit perfectly into the interior of an office, restaurant or spacious apartment. To create a realistic picture on the entire wall, you should use large-format canvases, which consist of several panels. After their stickers, the edges of the room are erased, and it becomes visually endless. Horses running through the endless fields, tall deciduous trees and huge rivers - all this can then be observed in your room.

When choosing the best wall murals, it is very important to be able to determine the main color of the image, and you also need to take into account the general style of the artistic picture so that there is no contradiction between the design of the room and the decorative panel. Some colors have an approaching effect, others create a removal effect. For example, if the walls of the room are decorated in warm colors, then it seems smaller. If a small room needs to be visually expanded, you need to glue photo wallpapers in cold shades.

Visually increase and approximate the subject of red, brown, pink, white and orange. Violet, cyan, blue, black and gray tones create a feeling of remoteness and reduction in the volume of an object.

Preparatory work before mounting photo wallpaper on the wall


Wallpapering the walls is carried out at an air temperature of +5 to +20°C. For their uniform drying and prevention of flaking, there should be no drafts in the room.

Before gluing photo wallpapers on the walls, their surface must be carefully prepared. This procedure consists in removing the old coating, baseboards, mold stains, rust and grease, followed by leveling the walls and priming them. It is desirable to lighten the surface before finishing with photo wallpaper. Therefore, its alignment should be done with gypsum putty.

After preparing the walls, it is necessary to mark up the wallpaper and prepare the glue. First of all, you need to lay out the canvas panels on the floor until you get a solid picture and compare its dimensions with the dimensions of the wall. Then you should mark the wall for each panel. To do this, you need a pencil, a level and a long ruler. At this stage, it is important to observe the horizontal and vertical marking lines. This will help to correctly and easily paste the wallpaper.

First you need to draw a horizontal line equidistant from the ceiling and floor along the wall. Then mark the center of the wall on it and draw a vertical through it. This guideline will ensure that the drawing is exactly in the center of the wall. It is very important to place the first panel strictly vertically, otherwise this negligence will entail the next one after it, and the result will be obliquely glued photo wallpapers.

Wallpaper glue must be prepared, adhering to the proportions that are indicated in the instructions. It must match the type of wallpaper. After adding water to the dry mixture, the resulting mass must be stirred evenly and thoroughly. A prerequisite is the absence of lumps and the uniformity of the composition. After the initial mixing, the glue should be left to infuse for 10-15 minutes, and then continue the process until the mixture is ready for use.

Wall sticker technology


If you do not take into account the fit of the image, photo wallpapers are pasted in the same way as ordinary wallpapers. When working with a paper-based material, the adhesive composition is applied to the canvas. In the case of a non-woven base - on the wall. for sticker vinyl wallpaper both canvases and the wall are smeared with glue. If possible, it is recommended to start sticking photo wallpapers from the window. To accurately join the parts of the image, you can draw its diagram on it.

Before sticking the photo wallpaper on the wall, you need to prepare a spatula, brushes, rollers, dry, clean rags and a step-ladder. After that, the surface of the wall section must be treated with glue and wait for it to partially dry: the water should be absorbed, and the wall should remain sticky.

Then you should carefully attach an element of the photo wallpaper canvas to the wall, aligning its edge with the marking line. It is better to press a fragment of the canvas to the surface, starting from the middle. It is necessary to smooth the glued wallpaper element from the center to the edges with a special plastic spatula. Each of the subsequent parts of the image should be glued with an overlap or exactly butt.

When overlapping, you need to achieve alignment of the pattern of both parts, and then make a cut along the alignment line. In this case, both strips are cut simultaneously from top to bottom with one movement along the ruler. After that, the cut edges must be removed, the joints aligned and carefully glued.

The drying time of photo wallpaper depends on humidity and air temperature. If the conditions are normal, the glue will dry in 3.5 hours. Drying time can be shortened by using hot air up to 60°C or infrared emitters.

If liquid adhesive remains at the joints of the canvases, it can be removed with soapy water or water. Acetone or ethyl alcohol can be used to remove dried adhesive. Remember that inaccurate use of solvents can ruin the photo wallpaper laminate. Therefore, when working with acetone or alcohol, care must be taken!

Self-adhesive wallpapers of this type are easier to attach to the wall than ordinary ones, but they cost a little more. When preparing the surface in this case, in addition to leveling with putty, it must be degreased and primed acrylic composition. Then it is necessary to pre-assemble the image and draw a place for its placement on the wall.

From the first canvas, the paper layer should be partially separated by 5-8 cm. Then the edge free from insulation should be pressed against the wall and held. After gluing it, the paper must again be separated by another 20-30 cm, and the canvas should be pressed against the wall. This procedure should be repeated until the entire piece of the canvas is pasted.

How to glue wallpaper on the walls - look at the video:

When you want to refresh the room or make a designer renovation, you should consider the question - how to glue photo wallpapers?

Wall murals have been included in the list of materials that have been used in repairs for a long time.

During this time they have improved and have not lost their relevance.

Photowall-paper will give the chance to make an interior unique. The owners of the premises may not completely change the old wallpaper, but only paste photographic ones in a certain part of the room.

In this article, we will talk about how to glue them with our own hands and show a tutorial video.

Depending on the density of the basis of photo wallpapers, they can be divided into 4 categories:

  1. Density from 90 to 120 g/sq.m ( paper wallpaper). Very thin base, comparable to old Soviet wallpaper. Requires careful handling when unfolding and smoothing, easily forms folds and is easily torn. You can also glue paper wallpaper with your own hands on PVA glue;
  2. Medium density base - 150 - 250 g / sq.m - vinyl. On such wallpaper, embossing can already be applied. Their sticking is carried out with special glue;
  3. High density - 300-400 g / sq.m - most often non-woven;
  4. Super density - over 400 g / sq.m - fabric wallpaper. Usually sold with glue, it is not recommended to glue them with your own hands without experience.

Wall murals are usually produced on a medium-density paper or non-woven base.

It is quite possible to glue a small canvas on a paper backing, but if you want to get a picture on the wall big size, then it is better to purchase non-woven material.

Now it remains to choose the right glue. For heavy wallpapers (which include vinyl and non-woven), it is worth purchasing products from the KLEO or Quelyd brands, making sure that the appropriate type of photo wallpaper is indicated.

For light and thin photo wallpapers, you can use any glue suitable for the paper base. Most often, the manufacturer in the attached instructions recommends one or another type of glue.

Sticking technology

First, prepare the surface - you need to remove the old wallpaper. Dried coating is often removed without the use of additional funds.

If it holds tight, then moisten the old wallpaper with water and leave for half an hour. Try to see if they are scraped off with a spatula, if not, moisten the paper wallpaper again.

When the old wallpaper is removed from the walls, look for cracks in the plaster.

If they are available, we proceed as follows: we knock down the old, easily lagging layers of plaster, stretch the plaster mesh and plaster in a rough way.

Only in this way can we protect the new wallpaper from tearing at the cracks. If there are no cracks, then plaster mesh we don’t need it, but we still have to plaster.

If the wall is relatively flat or old wallpaper is slightly preserved on it, then you can get by with fine plaster. A 2-3 mm layer applied to the prepared surface is quite enough.

If the differences in the level of the wall are more than 3 mm, then rough plaster is indispensable. When the coating is completely dry, it must be sanded.

Photowall-paper will emphasize any roughness, even fine dust will be noticeable on them. Our task is to achieve a perfectly flat surface with a grout and then blow off the dust from it.

Further surface preparation is not required, unless otherwise specified in the wallpaper instructions.

As a result preparatory work you should have a perfectly smooth wall in front of you without any color spots, and we can start gluing. Consider how to properly glue wallpaper.

The gluing technology is presented in the video.

We mark a horizontal line along which we will align the upper edge of the canvas. If you do not glue the canvas from the ceiling itself, then you may have to spend some time on the line.

Apply it with a pencil or marker and check the level. Draw a vertical outline. If the wallpaper consists of several parts, then make outlines for each.

Step back as far as you can and see if the vertical lines don't feel parallel to the walls? If visually everything looks even, then you can start gluing with your own hands.

It is much worse if you understand that the drawn rectangle emphasizes the absence of right angles between the ceiling and walls.

In this situation, you will have to glue with a slight slope, as if hiding the slope of the corners.

It is undesirable to put massive furniture near the resulting picture (it will emphasize the bevel), and it is better to lower the level of photo wallpaper below the surface of the coffee table.

To visually enlarge a small room, step back from the ceiling to the top edge of the wallpaper 5-10 cm, it is permissible to leave the old wallpaper.

When the contour is marked, you can proceed to the practical part and start gluing.

Dilute the glue - in a container with clean water the recommended temperature, slowly pour out the glue and stir at the same time.

Apply glue with a wide brush reverse side the first sheet of photo wallpaper, carefully lubricating the edges.

We combine with the upper left corner allocated for the photo wallpaper, and, gradually smoothing, we glue the sheet to the wall. Try not to rub the wallpaper.

Our task is to gently combine the coating and the wall, squeezing out the remaining glue. If glue leaks from under the edge of the photo wallpaper, immediately remove it with a rag. Glue the next sheet in the same way.

How to glue photo wallpapers on a wall - end-to-end or overlap - is usually indicated by the manufacturer in the instructions.

Lightweight paper, mostly glued, overlaying each other. Vinyl or non-woven should only be glued end-to-end.

The video shows that the bubbles that form when gluing photo wallpapers can be easily removed by piercing them with a needle. When all sheets are glued, make sure the edges fit snugly.

If necessary, bend the edge, apply a drop of glue and glue it again. Go over all the sheets, squeezing out excess glue from the center to the edges. Now you need to let the wallpaper dry.

During the day, do not allow open windows - the photo wallpaper should dry naturally, the adhesion between the canvas and the wall should have time to harden.

Choice of photo wallpaper

The most difficult is not so much the question of how to glue, but the moment of choosing photo wallpapers. A number of details need to be taken into account, such as the size of the photo block, its combination with the existing furniture and space.

Do not rush to glue the first ones you like, watch videos of various interiors.

A few simple tips will help you navigate:

  • We choose the size. Too large a canvas will be covered by furniture if the room itself is small. It is important to choose the optimal size, it can be slightly larger than the free space between the furniture. Large photo wallpapers located above the sofa in the living room look good. In a small room, it makes sense to avoid photo wallpapers with a large image that is disproportionate to the room. In the nursery and bedroom, almost the entire wall can be allocated for placing photo wallpapers;
  • Choose a type. For a living room, it is important to equip the design, and there are no special requirements for the type of material. You can glue non-woven, they will look great. The main criterion for choosing photo wallpapers for a children's room is the ability to wet clean, because a young child can easily get them dirty while playing. It is better to stick wallpaper in the children's room that can be washed;
  • Choose a color. In a brightly lit room, light-colored wallpapers and neutral-light images are great, but dark ones should be avoided. If the room is sufficiently illuminated by the sun's rays, but not too bright, then you can glue photo wallpapers of any color - from very bright and light to dark, depending on the interior. When watching video presentations different options design, look at the combination between the interior of the room and the color of the wallpaper. In the dark, neutral tones will look best, too light tones will attract the eye, and excessively dark ones will increase the darkness in the room. If you leave the old ones, and in addition to them you will glue photo wallpapers, then pay attention that there is no color conflict between them;
  • Visually increase your room the presence of colors of "warm" colors - pink, brown, red. The predominance of "cold" colors - blue, black, purple, blue - will visually reduce the room and "push back" the object depicted on the photo wallpaper;
  • Choose a drawing. It is important that the photo or drawing fits into the interior of the room. In the children's room for a preschooler, a cartoon picture would be ideal, and for a primary school student, an image that motivates them to new school responsibilities is more suitable. In the living room and in the bedroom, a photograph of nature will look great.

Described above technological process, how to glue photo wallpapers, makes it easy to cope with this task even without experience.

The apartment, in which only photo wallpapers were hung from the entire renovation, is already taking on a fresher look.

The design of the room with the use of photo wallpaper is available to everyone, it can be done in a short time and without a significant investment. It is very easy to glue, see for yourself.