How to cut tiles with a manual tile cutter - video instruction. How to cut ceramic tiles at home How to cut tiles at home

During repair work at home, it is often necessary to cut tile. The choice of tools is huge, today both modern electric devices and manual ones, which have already become a kind of classic of rifled business, enjoy the same success. In this article, we will cover all available options Let's take a look at the rules in detail.

Threaded fragments are an integral part of any facing work

Tool selection

All devices are divided into two groups: manual and electric. The first ones are good because they take up little space, are easy to use, there is practically no dust, hands are not endangered. But with durable tiles, not all fixtures will be suitable. This category includes glass cutter and manual tile cutter.

There are electrical analogues of these tools. Despite their size and risk of injury, they provide a fast process, excellent quality and the ability to process a large amount of material of any strength. A grinder and an electric jigsaw are indispensable devices in the implementation of a figured cut.

Basic Tools

Cutting tiles at home often involves dusty work, so take care of eye and respiratory protection from small particles and splinters. Purchase goggles and a respirator.

The main nuances of work

How to cut tiles with such tools? Let's highlight a few points:

Be sure to mark the material;
Water will soften the tile and facilitate the cutting process, reduce the amount of dust;
Work is carried out on the front side;
The pressure on the material should be moderate, and the movement confident, but smooth;
It is impossible to break a tile through force;
The notches along the edges are cleaned with sandpaper.

glass cutter

Most people are in no hurry to purchase expensive and very large equipment for home use. An ordinary glass cutter comes to the rescue.

A hand tool can easily cope with tiles

How to cut tiles:

Soak the material in water for a short time to soften its structure, this will facilitate the process, it will take less effort.
Mark the break point with a pencil.
Take the tool in your hand, press the tile to the work surface with the other and hold the ruler. Draw a clear straight line in one go. Apply enough pressure to form a deep groove without chipping. Work on the face of the tile.
Tap the tile with the handle of the tool along the groove on both sides.
Move the element to the edge of the table and press it with your hand, it will split into two parts along the notch line. Or tap on the edge, the fragment will fall off on its own. So the likelihood of tooth formation is less.

Bulgarian

This tool cuts any material up to metal and porcelain stoneware. To do this, use a diamond-coated nozzle with a suitable grain size.

The most popular and used device

How to cut tiles with a grinder:

Attach a dry cutting disc to the tool, check the quality of the connection.
Mark the cut line on the tile.
Work only on the front side, to avoid chipping.
Fix the tile on the work surface so that it does not move, but nothing interferes.
Start from yourself. Hold the tile with one hand. Drive the disc slightly away from the marking line.

With the help of a grinder, you can easily cut out an L-shaped or simple figured fragment.

tile cutter

There are two types of tools: manual and electric. The first option is smaller and most have it on the farm.

Ideally, tiles are cut with a specially designed tool.

How to use a manual tile cutter:

Wet the material with water.
Mark the break line with a pencil. In order to facilitate the movement of the cutter, treat this place with oil.
Lower the tool handle. Press the cutting part firmly enough to ensure that a deep groove is formed without damaging the tile itself.
Pull the handle to activate the roller cutter. Movement should be smooth and confident.
Split the tile into two pieces along the line.

How to cut tiles with an electric tile cutter:

Make a mark on the front side of the tile.
Fix it on the working surface of the tool.
If the design of your device provides for the presence of a water tank, pre-fill it and replace the tank.
Turn on the device.
When working with a tile on an electric tile cutter, do not exert much effort when moving the tile. Press it against the table just to secure it.
Gently slide the tile towards the working disk, holding on both sides if possible.
When the cutter comes to the edge, slow down a little so that you do not get a rough chip.

jigsaw

Figuratively cutting tiles, for example, in a semicircle, is difficult. To this end, it is recommended to use more maneuverable tools. Of course, you can try to do the work with a grinder or a glass cutter, but it’s better not to risk the integrity of the material and use a jigsaw.

Shape sawing tool

How to cut tiles at home with a jigsaw:

Draw a marking line with a pencil. If the tile is too dense, it is recommended to pre-soak it in water and then wipe it dry.
Install a diamond saw blade on the jigsaw.
Start off slowly to secure yourself in the furrow.
Guide the tool along the markup, but do not press hard. Until you cut through the tile, do not move it forward, otherwise you risk breaking the cutting part.
Gently bring the jigsaw to the edge, at this point it may go to the side, so hold it in the right position.

Other Methods

One of the non-standard, but quite effective ways to cut tiles is to use a simple nail. It should be sharp at the end and large enough to comfortably grip and apply the necessary pressure to the material. The principle of operation of the glass cutter is used. Draw a groove on the tile according to the marks, and then break it into two parts. The chip turns out to be even and fairly neat, if everything is done correctly and clearly.

Remember that not always an expensive tool is a guarantee of quality. For the most part, everything depends on the master himself, therefore, before working with the finishing material, it is recommended to practice on unnecessary fragments.

If you are tiling the surface, and there is no necessary tool it will certainly be interesting to learn about cutting tiles without a tile cutter. It is not at all necessary to spend money on the purchase of special equipment during repair work, many tools are quite interchangeable. Therefore, they cut the tile with practically improvised means, without the use of a special tile cutter.

In cutting tiles, not only a tile cutter is used

Alternative tools and their features

There are some of the most popular tricks that are sure to come in handy. So they cut ceramic tiles the following tools:

Bulgarian. This is a manual grinder, which, when changing the nozzle, is used in cutting metal, wood, tiles and other materials. She copes even with porcelain stoneware. The work uses a diamond-coated disc.
glass cutter. This hand tool is a tool comparable in size to a regular pencil. Despite its miniature size, it copes well with tiles, in particular, glazed ones. However, it requires clarity and confidence in actions.
Drill. This tool is used in making holes and creating rounds. A conventional drill or special nozzles such as crowns or ballerinas are used.
Pliers. The sharpened edges of the tool are able to cut through the top layer of the tile and create a break line. True, this will take a lot of time and effort.

Basic tile cutting tools

Also use an electric jigsaw, circular saw with a special disk and even a simple sharp nail.

Only diamond tool bits are suitable for processing tiles. Serrated saws and weak drills will not do the job and damage the material.

Bulgarian

Since they cut floor tiles without using a tile cutter with a durable and powerful tool, a grinder is better. Such a device is available from most home craftsmen. If using it on ceramic tile, change to a diamond-tipped blade for dry cutting, but leave it on wet if you work on wet substrates using water.

The tile is cut with a grinder, but the method requires certain skills, otherwise there is a high risk of spoiling the material

Work on the front. The direction of the tool should be towards you. First, mark the cut line and firmly fix the tile so that it does not move during operation and nothing prevents the passage of the cutting element. Hold the grinder straight for a straight cut. If you are cutting at 45 degrees, lock the tool on its side in the desired position.

A special cap will protect you from injury, which, in the event of a convergence of the disk, will take the blow. However, it is necessary to take additional care of personal protective equipment. A respirator or mask will cover you from dust, and construction goggles from small fragments.

glass cutter

This is the simplest and affordable way. It works on the same principle as a mechanical tool, but all operations are performed by hand.

It is better to use a diamond tip or a roller made of an alloy of tungsten and cobalt.

Application of manual glass cutter:

To do the job, you must first draw a line on the front side.
Attach a ruler and place a glass cutter on the edge farthest from you.
Apply pressure and draw a line with one confident movement. There will be no more attempts. Do not press the cutter too hard.
Tap the resulting fracture with a wooden handle.
Position the tile so that one part of it is overhanging.
Press on the edge of the tile and break it along the drawn line.

If you managed to make a deep enough incision, the edge will turn out to be even and neat, without chips on the front side.

Glass cutter - the easiest and most affordable way to separate tiles at home

Such a tool is not advisable to use with large amounts of work.

How to make a round

Sometimes they prepare tiles for laying around pipes or plumbing. Then the question arises - how to figurely cut the tile without a tile cutter.

Processing is carried out in several ways:

using a drill;
pliers;
grinder;
jigsaw;
glass cutter.

How do you get by with pliers? For this purpose, a line is drawn. Facilitate the task by scratching it with a nail. Then take the tool and start breaking off unnecessary material in small parts. The best way to do this is with carbide clips.

Inconvenient areas and curly cuts are made with pliers

As for the drill, they use ordinary drills to outline the contour, and then break off the excess with the same wire cutters. More effective method making holes of any diameter - the use of special nozzles: feather, ballerina, crown, etc.

Waterjet cutting

If there is a lot of work to be done and you need to cut hard ceramic floor tiles, but there is neither a grinder nor a tile cutter, it is better to use the services of cutting companies. building materials. The best option is waterjet cutting.

Using this method, even the most complex curly elements are created. The bottom line is that a thin jet of water mixed with the smallest solid abrasive particles, such as sand, is supplied under high pressure to the front side of the tile. Computerized process control allows even the most complex templates to be processed.

Each method is good in its own way. The choice of a specific alternative method depends on the scope of work and the skills of the master. With the help of these tools, you do not need to purchase a special tile cutter.

While doing finishing works ceramic tiles, it is rarely possible to avoid cutting it. Especially in those cases when the tiles we have chosen are large, and even if there are communications. But there are no hopeless situations. Now let's figure out how to cut tiles of any thickness, in any configuration using a special tool, and most importantly - without it.

What and how to cut tiles

The most common tool for cutting tiles is a manual tile cutter. An electric tool is widely used for large volumes of work, so it does not make sense for a private trader to buy it. Yes, and a manual tile cutter, the most inexpensive, will cost no less than 1000-1200 rubles, which also do not lie on the road, but if it is possible to take such a tool for a while, then why not take the opportunity to quickly fit the tiles in place without any extra tricks .

Ceramic tiles consist of a base (fired clay) on which a glaze is applied. This is the most common type of tile, although there are more difficult options to process. The main task when cutting is to cut exactly the glazed layer evenly and clearly, without chips and breaks. There are two ways to cut the tile completely - either make a deep cut on the glazed surface and break the material along the cut line, or cut it completely with a diamond tool.

If we make an incision and break the tile, then the clay base may have some curvature, which is not too critical if it is supposed to process the joints with grout or other mortar. The edge is perfect if you cut the tile with a diamond wheel, but it is quite difficult to clearly maintain the cut line without experience.

Tile cutters and how to use them

Manual tile cutter can be of two types: tile cutter machine and tile cutter tongs. The principle of operation of both tools is the same - the cutting wheel, by analogy with a glass cutter, but larger in diameter, cuts a deep groove in the glaze and parts of the base, after which the tile breaks exactly along the line without any problems. Strong guides will help to draw this line accurately and quickly on a manual tile cutter. Most tile cutters are equipped with rulers for precise tile marking, so you can cut even thin strips of tiles.

Tiles are not laid so often, so there may not be a tile cutter at home. Before cutting ceramic tiles at home with improvised means, remember that most likely we have an ordinary grinder. It will allow you to cut quickly and efficiently, the main thing is to choose the right cutting wheel. For ceramic tiles, diamond-coated wheels are used, but there are cutters for both dry cutting and wet cutting, so if the tile is wet during operation, this point must be taken into account.

We work as a grinder

Yes, to cut with a grinder, you need a certain skill, otherwise one wrong move can derail all the work. When cutting tiles in this way, it is desirable to fix the tiles on the plane and have easy access to the tiles from all sides. Any angle grinder is suitable for work, and the smaller it is, the more convenient it will be to adapt to the features of cutting ceramics:

the grinder tile is cut towards itself;

the cutting line must be clearly visible;

the cutting disc should not rest against anything after passing through the body of the tile;

the grinder is held strictly perpendicular to the plane of the tile.

And don't forget your mask and goggles.

Cutting tiles with a glass cutter

If there was no grinder at home, then an ordinary glass cutter will come to the rescue. Of course, there is no guarantee of the quality of the cut, but if the task is to cut only a few tiles, then this method will do. In principle, it is no different from cutting on manual machine, the only thing you have to use a metal guide is a ruler or other flat metal object. When working with tiles with a glass cutter, you need to remember the following rules:

the line drawn by the glass cutter should be one and only;

the glass cutter is pressed as strongly as possible with a roller to the surface of the tile and a stroke is applied in one movement, and the quality of the break depends on its depth;

after cutting the line along its length, it is tapped with a glass cutter several times so that the tile starts a directional crack;

a nail or the glass cutter is placed exactly under the cut line, after which they are sharply pressed on both ends of the tile.

Similarly, instead of a glass cutter, you can use a sharpened drill or a sharp clerical knife.

How to cut uneven tiles

In order to make a figured cut, you can use an electric drill and diamond crowns of different diameters, with which you can also make holes for communications. Sometimes they do it differently - they draw the necessary curve on the glaze with a marker, and then scratch along the line with a sharpened drill. Uneven sections are broken off with transverse wire cutters (carbide clamp) or thin pliers, after which the edge is cleaned with coarse sandpaper.

In such simple ways, you can cut ceramic tiles at home. Successful work to all!

When working with ceramic tiles, you can not do without adjusting products. Sometimes they need to be adjusted in size, in another case, cut a circle or a recess for the pipe. Cutting ceramic tiles can be done in several ways. Each of them is good in its own way.

Ceramic cutting options

Each of the methods is good in something different and suitable in a particular case. How to cut ceramic tiles? There are three main ways to cut ceramic tiles evenly:

Using a grinder with the appropriate circle.
The use of an electric, manual tile cutter or special tongs.
Improvised tools for cutting ceramic tiles, such as a glass cutter, a well-sharpened nail or drill.

In order to understand all the subtleties of the work, you need to consider in detail each option.

Cutting ceramic tiles grinder

Cutting ceramic tiles at home is done with a grinder. If there is no specialized tool for ceramics at hand, then the grinder is always at hand. In addition, there are cases in which you need to make a fine adjustment by cutting off only a thin strip of 0.5–2 cm. The tile cutter in this case will not help because of its widely spaced support legs.

How to cut ceramic tiles at home with a grinder? It is enough to take a pencil or marker, make a line on the ceramic tile, and then cut. In the process, you should monitor the heating. Do not cut it in one go. Otherwise, the product may crack. For the desired result, the movements of the grinder are made smooth, without pressing.

Advice! It is necessary to pass the grinder along the drawn line not in the very center, but along the line, from the side of the edged part. By cutting the ceramic along a strictly marked line, the fragment will become smaller by a couple of millimeters.

How to cut ceramic tiles with a grinder? There are a few tips for this:

The process is best performed on weight, in which case the vibration from the tool will be compensated by hands.
After trimming, the edges may be sloppy. Therefore, in the place of the first cut, a neat second pass is made.
Sandpaper will help smooth out the bumps.
Bulgarian is a very dangerous tool. To protect yourself, wear gloves, wide safety goggles or a shield before cutting. Thick clothing is required, and shoes are leather.

Choice of cutting disc

It is important to know which disc to cut ceramic tiles with. Only diamond-coated metal discs are suitable for this purpose. However, there are 3 types of such products on sale:

Discs for concrete.
Discs for stone, natural or artificial.
Discs for bricks.

The disc for cutting ceramic tiles can be recognized by the missing holes on the soldering. It is even and smooth. As for the discs for concrete, they are made with slots. Using such discs, a strong vibration will be generated during cutting. This is fraught with the destruction of the facing material and the appearance of chips on it.

Important! The fragments formed in the course of cutting scatter in all directions. The chance of getting injured increases.

Using a manual tile cutter

It is this tool that is most often used when working with facing material, because for this it was created. The ceramic tile cutting machine is used by both craftsmen and amateurs. It is enough to buy it at the nearest hardware store. The price depends on the size. The minimum cost is 350 rubles. An upgraded version is available for an additional price, allowing ceramics to be cut at a 45° angle for joining.

Note! Do not buy the cheapest tile cutters. They can break finishing material, due to the incorrect balance of the elements.

How to cut ceramic tiles at home with a tile cutter? Instruction:

Ceramics is installed in the tile cutter. There is a special mark on the tool. The line on the tile, made as a guide for cutting, must converge with the mark.
The handle of the tile cutter is lowered, after which, with a smooth movement, with one speed and pressure, the handle is drawn along the tile away from you. It is necessary that the roller cut through the coating (glaze) to a uniform depth. It is enough to complete one wiring. It is not recommended to make multiple passes. They will not improve the cut, but will only aggravate the situation. Microscopic discrepancies are created and the final fault will turn out to be of poor quality.
The tile cutter has special paws with which you need to break the incised product. The movement is sharp and strong.

There is a metal tubercle on the tile cutter platform. It is protected by soft pads that help the tile not be damaged after breaking.

Tongs cutter

This is a cheap version of the ceramic tile cutter. Its price is from 190 to 350 rubles. The purchase is rational only for cutting at home, with a small volume. The facing material must be thin. Cutting technology is as follows:

Markings are applied to ceramics, taking into account seams and gaps.
A metal ruler must be attached to the tile along the line, after which one-time cut with a cutter along the ceramics. You need to put pressure on the tile cutter medium-moderately so that a visible strip forms. Swipe the tool from the edge towards you.
Smooth pressure on the handle will help to split the ceramics.

Using an electric tile cutter

If the object is large and you have to cut a lot of products, then it is rational to purchase an electric tile cutter. With him, the work will be done quickly and efficiently. The tool has a cutting wheel and a water supply system. The circle is not simple, but with a diamond coating. And water is needed to remove dust and cool the surface of ceramics. The cost of the unit is 3500-4100 rubles.

How to cut ceramic tiles with this tile cutter? The process is reminiscent of working with a grinder.

Cutting with improvised means

You don't always have to do a lot of work. Why waste money when you need to cut a few tiles. In this case, you can use the following tools:

ordinary glass cutter;
sharpened nail or drill;
mounting or clerical knife.

How to cut ceramic tiles with a glass cutter? The algorithm of actions is as follows:

The desired piece will break off. It is clear that it will not work perfectly to make a cut. But you can save money. And after that it is enough to wipe the cut with sandpaper. In addition, if just for an hour to put a tile in clean water, then the cutting process will become better.

Note! Some people ask if ceramic tiles can be cut with a jigsaw. Yes, but the cut will not turn out as high-quality as we would like. The use of an electric jigsaw is rational when adjusting tiles laid in an inconspicuous place. But, there are special diamond-coated saws for a manual or electric jigsaw. This option is allowed.

Complex curly cutting of ceramic tiles

In addition to the standard cutting of products, in which an even cut is made, there is a figured cutting of ceramic tiles. Tile cutters in this case become useless, as they can make exceptionally even cut lines.

One of the common cases is a socket. How to cut a hole for a socket in a ceramic tile? Everything depends on the circumstances. Sometimes it is enough to make a U-shaped cut to the size of the outlet. Another option is to split the two tiles into two rectangular pieces and cut them off. In this case, the long side is cut with a tile cutter, and the short side with a grinder. External corners are made in the same way.

Advice! When marking, it is taken from 1.4 to 1.8 mm for the indentation from the wall, and 2.5 mm for the grout.

There is another way to perform U-shaped cutting. For this, any acceptable method is used. For example, the same ruler and glass cutter to create cuts on the glaze. After that, the excess parts are chipped off, and the edges are rubbed with sandpaper.

But how to cut a hole in a ceramic tile for a pipe? Here it is already more difficult, since there are no right angles. The hole should be round and even. Professionals use special crowns that have a diamond coating and allow you to quickly make a hole of the desired diameter for a sewer or water pipe.

But what if there are no such crowns? The first option is to use a tile drill or a pobedite drill. This is not the easiest way, but quite implementable:

Before cutting a circle in a ceramic tile, you need to install the tile on a flat and clean surface.
Marking is applied to the surface of the tile.
A drill in a drill makes even holes in a circle. They need to be made dense, the closer the better.
Using the same drill, you need to remove the remaining gaps, doing the work at an angle of 45 degrees.
The hole will turn out rough and sloppy. Therefore, with sandpaper and large wire cutters, this is corrected.

If this hole is made under the mixer or under the sockets, then you do not need to bother with aligning the edges, they will disappear.

When you need to make a hole of a larger diameter, for example, for forced ventilation, a mini-grinder with a disc for ceramics is used. Again, markings are made on it, and with the help of a grinder, two cuts are made crosswise. After that, four even cuts are made between them to form a square. The remaining edges are bitten off with wire cutters. Do not immediately bite off large pieces. In the end, everything is cleaned with sandpaper. Another cutting option is directly along the contour of the intended circle by half the thickness. After that, a full-thickness incision is made crosswise. It remains to break off 4 elements.

You can make a hole with a jigsaw and a special string for it. The tile is marked, a hole is made in it, into which a string is inserted for manual jigsaw or sawing on a jigsaw tile. A hole is made along the contour. It will turn out even and neat.

One of the most popular ways is to use a drill called a "ballerina". The ballerina will allow you to perform as accurately as possible round holes correct form different sizes.

Conclusion

There are a lot of options on how to cut ceramic tiles. Each of them has its own advantages and disadvantages. However, they help to effectively cope with the task. For this, a grinder, special tile cutters and improvised materials are used.

18948 0

With the development of technology, the popularity of ceramic floors in buildings has increased. Kitchens, bathrooms and corridors are hard to imagine without tiles, but also for living rooms increasingly used ceramic coatings with heating. Floor tiles are easy to care for, reliable, durable and visually attractive. Also, such coatings do not burn, are not afraid of water and do not cause allergies in residents.

Laying tiles on the floor is not particularly difficult. Attention deserves how to properly cut or saw such material not “for firewood”, but for the floor. Of course, such precise work is only possible for qualified specialists who use special equipment to cut tiles - a mechanical or electric tile cutter equipped with a diamond wheel and water supply directly to the cut line. With this device, you can easily and quickly cut tiles.

At home, it is not always possible to use a professional tool for cutting tiles. Firstly, it is not always advisable, since the laying of floor and wall tiles takes up a small part of the total repair volume. Secondly, the tile cutter has a rather high cost, but it allows you to work only with certain sizes of tiles.

He may not be able to cope with non-standard options. Ceramic floor tiles differ from wall tiles in their thickness, relief, strength and structure. To cut it, you need to make more effort. Craftsmen have learned to solve such problems at home with the help of improvised tools and means. It is recommended to take advantage of their rich experience.

Floor tiles can be cut with:

threaded turning tool with a ruler;
glass cutter;
drills with a winning tip;
hacksaws for metal with an abrasive rod;
"Bulgarians";
drills;
jigsaw;
ordinary clerical knife;
tile cutters.

Technology for cutting tiles for the floor in the apartment

In order to make it easier to cut tiles, you need to properly prepare the material. Softening ceramic tiles at home is achieved by soaking in water for half an hour. This simple procedure removes dust, reduces brittleness and increases the pliability of the material. After that, it is not difficult to cut it even with an ordinary clerical knife and a glass cutter.

Glass cutter and stationery knife

The main thing when cutting with these tools is the accuracy and clarity of movements. It is necessary to act calmly and consistently:

use a flat surface of the floor, table or stool;
put tiles on it front side up, make the necessary marks and draw a line with a ruler and a pencil;
attach a ruler to the line until it is completely aligned;
make a clear cut along the ruler, pressing firmly on the glass cutter;
tap along the incision;
under the notch line, you can put a drill and, gently pressing on the edges, break the tile. If you place the tile along the cut groove on the edge of the countertop and gently press down, you will also get a good result;
with a good cut of the tile, it will break exactly along the line.

You need to cut with a clerical knife using a similar technology. The only difference is that the incisions must be made along the same line several times in order to deepen the furrow.

It should be noted that such methods are not suitable for cutting thick tiles. In such cases, it is necessary to duplicate the facial incision using a groove with inside.

Tile cutter

This is a small budget option for cutting tiles. There is a cutting wheel on one side and a cross plate on the other. With it, cutting ceramics is quite easy. To do this, you need a ruler with a right angle on one side.

Tile cutter is used for simple cutting

The required distance is marked on one side of the tile on the front side.
Along the marking line from the far edge of the tile towards itself, an incision is made once with medium pressure. As a result, a visible strip is formed.
The transverse plate of the forceps must be placed on top of the front side so that the fault line runs strictly along the center of the plate.
At the last stage, with a smooth compression of the tongs, the tile breaks in a straight line.
In the case of cutting thick tiles, it is recommended to also make a small groove 2-3 mm deep on the inside.

In the process of laying tiles, they face the need to cut through the tiles, make curly cutouts in order to bypass the bulges and pipes. Curly cutting It is also possible with a glass cutter, however, in this case, special wire cutters and sandpaper will be additionally needed.

Drill

You can solve this problem at home with a drill using special nozzles. Nozzles can be as follows:
"ballerina", working like a compass;
tubular drill;
"crown";
conventional drill.

It is better to drill floor tiles with a universal drill bit with a pobedite coating. In this case, before drilling, it is necessary to prepare the point of application of force by destroying the enamel. The drill must be periodically moistened with water.

jigsaw

Cut floor tiles best using electric option jigsaw with diamond wire. To do this, after laying, fix the tile on a flat surface of a chair or table. In this case, the area with a drawn line on the front side should be in weight. By running the tool along the line, you can get a smooth cut line without chips.

Bulgarian

You can cut a large amount of ceramic tiles with a grinder using a diamond blade. When carrying out these works at home, special attention should be paid to safety issues. The person working with this tool must have the necessary skills and follow clear rules. For example, cutting tiles is done strictly towards you. In this case, the tile must be firmly fixed. The respiratory tract must be protected from dust with a mask.

In general, the use of "grinder" at home has a number of disadvantages. First of all - an abundance of dust and noise. In addition, working with this tool is potentially dangerous and requires sufficient skills.

Depending on the availability of certain tools, you can choose best option repairs at home and after training on illiquid material, get to work.