In the article we will tell you how to choose the right place to install the dishwasher, in what order to connect it. After the dishwasher is delivered to your home, you can immediately connect and start it yourself, without overpaying for the services of a master.
How to install a dishwasher in the kitchen
There are two options for installing PMM: in a finished kitchen or in a pre-designated place in kitchen set. Dishwashers vary in type and dimensions:
- Compact. Holds from 3 to 5 sets of dishes. Dimensions 50x60x50 cm. Mounted on the countertop or under the sink.
- Narrow. Width 45 cm, capacity from 6 to 10 sets. It can be fully or partially built-in.
- Full size. Dimensions 65x65x90 cm, holds from 10 to 15 sets of dishes. Can be built-in or freestanding.
Usually, manufacturers in any kitchen set provide a place to place appliances. For this, the dimensions of a narrow dishwasher are taken, 5-10 cm are added to them from all sides. If your kit does not have a special cabinet, then it is better to choose a freestanding machine. You can install it in any convenient place, even between the cabinets.
When choosing a free-standing PMM, it must be taken into account that appearance cabinets matched the design of the kitchen.
If you have prepared drawings in advance for placing a Samsung, Miele or other brand dishwasher, there will be no installation problems. Otherwise, for embedding, pick up a cabinet near the sink. Keep in mind that the distance from the PMM case to the back wall must be at least 5 cm for normal ventilation.
If you have a small family, and the area of \u200b\u200bthe kitchen does not allow you to install a full-sized model, choose the desktop version. You can put it under the sink, and the connection rules do not differ from other models.
- Before buying built-in appliances, measure the dimensions of the kitchen cabinet.
- Dishwasher legs can be adjusted in height. Use a level to level the machine. Some Hotpoint Ariston, Whirlpool models are very sensitive to tilt even as low as 2 degrees. This may affect their future work.
- Mount the machine near a sink. This will make it easier to connect the drain and water without having to extend the hoses. Experts say that lengthening the hoses can lead to leakage, as well as create a large load on the drain pump.
- When building into furniture, install a metal plate under the countertop to protect the wood from steam. In built-in models, the plate is included.
Take a look at the instruction manual. The order of installation and embedding of the dishwasher is indicated there. Included are templates for hanging the door.
- To connect the equipment to the network, a separate moisture-resistant socket is used. Do not connect with extension cords or tees.
Independent connection of the dishwasher
It is recommended to immediately install the machine on site, and then deal with the connection. But in the case of the built-in model, it is more convenient to first connect the hoses, and then mount the machine in a niche or cabinet. How to install an embedded PMM, read our separate article.
What you need to connect
Accessories:
- euro socket with a moisture-resistant housing and grounding;
- copper three-core cable (for organizing wiring);
- stabilizer;
- brass tee with stopcock;
- clutch;
- corner tap;
- extension cord and additional hose;
- siphon with two outlets (for connecting dishwasher and washing machine simultaneously);
- hose "Aquastop" (if not available);
- fum tape for sealing joints;
- filter;
- clamps, gaskets.
Tools:
- pliers;
- screwdriver;
- wrench;
- level.
Organization of electrical wiring
The dishwasher cord is specially made short. The European type plug can be connected to a special socket, which is located no higher than 45 cm from the floor.
Do-it-yourself replacement of the plug on the dishwasher will void the warranty.
How to organize the electrical connection correctly:
- Drill a channel in the wall, lay a copper wire.
- Arrange a moisture-resistant socket with grounding.
- Connect the outlet through a 16-amp difavtomat. For safety, it is recommended to install a voltage stabilizer. How to choose a dishwasher stabilizer, read in a separate article.
Plumbing work
You know how to install and connect the electrical part of the machine. Any model of PMM Korting, Hansa, Gorenje, Beko, Ikea, Ariston is connected to the water supply in the same way. The most simple solution will be connected through a mixer. But if you install the equipment far from the sink, then the method of tapping into a cold water pipe is suitable.
To connect to a water pipe:
- Using a grinder, cut a piece of pipe.
- Install the release clutch.
- Screw a tap with a shut-off valve onto the coupling.
- Connect the dishwasher hose to the faucet outlet.
Through mixer:
- Disconnect the mixer hose from the pipe outlet.
- Install brass tee.
- Connect a mixer to one outlet.
- To the other - a coarse filter and the end of the inlet hose.
Now take care of the water.
Drainage work
Where to connect the drain? There are also two options to choose from here:
- Directly to the sewer.
- through the siphon.
To connect to the sewer, it is enough to install an adapter on the outlet, to which you can connect the drain hose of the dishwasher and washing machine. Connections are carefully sealed.
When installing through a siphon:
- Remove the old and install a new siphon.
- Connect the dishwasher drain hose to the outlet.
- Be sure to fasten the connection with a clamp. With strong pressure, the hose can be torn from its place, which will lead to leakage.
Observe the correct spacing and bend of the hose when draining. This will help avoid the siphon effect (see diagram below).
As you can see, you can organize the installation of PMM "Hans", "Burning" and other brands yourself. When the work is finished, run the test program without dishes to check the strength of the connections and the operation of the nodes. How to run your dishwasher for the first time, read the article.
The video will help you install the dishwasher yourself:
A dishwasher makes household chores much easier, as you do not have to spend time washing dishes. In addition, modern dishwashers save water, especially if many people live in an apartment or house.
You can connect the dishwasher yourself, almost without resorting to the help of professionals, for this you first need to choose a place for it. V modern furniture there are niches for the dishwasher, if the cabinet was purchased first, and then the equipment, then you will either have to redo the design or select a dishwasher of the right size.
You should install a grounded euro socket in the kitchen, it is best to bring a separate feed-through cable to it, which is connected to the drive shield. If a person is not particularly versed in electrics, then it is best to hire a specialist to lay the cable and connect it.
The dishwasher is connected to the water through a special outlet pipe, for this:
- A filter is first installed on the pipe, which traps rust;
- After it, a shut-off valve is installed;
- And after that, the hose is connected.
For greater sealing of joints, it is necessary to use FUM tape. There is a connection for draining water through a siphon, which is equipped with an additional outlet, and the drain hose is fixed on the furniture or on the wall, at a height of about 50 cm, after which it descends to the water distributor.
This arrangement is necessary so that dirty water from the sink or siphon does not enter the drain hose.
Naturally, all work must be carried out in compliance with safety regulations, when laying the cable and connecting it, the apartment or house must be de-energized. Also, when connecting to the water supply, taps must be closed.
Do-it-yourself dishwasher connection technology
For many people, a dishwasher is no longer a luxury, but a necessity, especially if the family is large and you need to wash a large amount of dishes after eating. In order for this household appliance to serve enough long time, it must be connected correctly, and almost all installation work quite capable of doing it by hand.
It is enough to connect a euro outlet to a regular one with a cable through a machine, but this is only possible if both of them are grounded in the house, if not, then you still have to lay an additional line.
For a cold water pipe:
- A tee or even a quadruple is installed (naturally, the water must be shut off) with a tap, one branch will just power the dishwasher.
- If a quadruple is installed, then you can also power the washing machine at the same time.
- Before the faucet, a filter designed for coarse cleaning should be installed.
The waste hose is connected directly to the sewer pipe using a tee, provided that the pipes are plastic, as this facilitates installation, or is connected to a special siphon with an additional outlet.
When all the connections are made, you should check the operation, for this the water opens, the dishwasher turns on, and the test mode starts. If this is not the case, then simply the shortest dishwashing mode. You should make sure that there are no leaks anywhere, and the machine works as it should.
Instructions: how to connect a Bosch dishwasher
To connect a Bosch dishwasher, it is not necessary to call a specialist, you can do all the installation work yourself, since now almost all household appliances are quite simple and do not require any special skills and abilities. To properly connect the Bosch dishwasher, you must follow certain steps.
It is forbidden to use extension cords powered from ordinary household sockets to connect the dishwasher.
Determination of the most optimal place for it, it should be convenient for controlling the dishwasher, as well as such an arrangement that it is close to the water supply and drain pipe or siphon (distance no more than 3 m). An electrical connection should also be provided, since the cord for many dishwashers is small, it should be provided for the installation of a separate and always grounded outlet.
Instructions:
- A branch is made from the main water pipe using a tee made of high-quality material.
- If the pipes are plastic, then the branches are also made plastic pipes that are soldered to each other.
- It is better to use a special manifold instead of a tee.
- The drain hose to the sewer must be connected in such a way that there is no backflow of water into the machine, and also that a water seal remains in it, which will prevent unpleasant odors.
- It is better and safer to connect the drain to a special siphon that has the necessary branch for this.
The Bosch built-in dishwasher is connected quite simply, with the exception of one moment. It is necessary to put the gasket in the hose that is connected to the water supply exactly according to the instructions, otherwise leaks in the connection cannot be avoided.
How to properly connect a built-in dishwasher
The built-in dishwasher is connected in almost the same way as other models. The advantage of this model is that this type of machine is built into kitchen furniture taking up minimal space in the kitchen. Hence its name came from the word built-in. Some models are fully built into the kitchen furniture, and are closed with decorative doors, while others may partially protrude outside. When installing such a dishwasher model, you should follow the advice.
.jpg)
It is necessary, together with the purchase of a dishwasher, to choose furniture for it, it will the best option. If furniture is purchased first, and then it is planned to purchase a dishwasher, then when choosing, provide a place for attaching the latter.
All connections, both to power supply, as well as to water supply and sewerage, should be made following the instructions. If you connect it, neglecting the rules, then leaks may subsequently begin, and even this may sooner or later lead to the failure of the dishwasher. The connection to the mains power supply must be carried out only through a special socket with grounding, this will prevent electric shock. Equally important is the connection to the drain, the hose must be connected to the sewer so that its height is not less than 50 cm. Otherwise, sewage may be thrown into the dishwasher. The dishwasher itself must be firmly fixed and leveled, this will also ensure the normal operation of the machine.
How to connect a dishwasher with your own hands (video)
Each person can connect any dishwasher to all communications independently. Moreover, you can connect a desktop and compact dishwasher without the involvement of a specialist.
|
Type of work |
Unit. |
Cost, rub |
|
Installing a BEKO dishwasher (without electrics) |
From 1400 rub. |
|
|
Dismantling the BEKO dishwasher (without electrics) |
From 700 rub. |
|
|
Bosh dishwasher installation (without electrics) |
From 1400 rub. |
|
|
Dismantling the Bosch dishwasher (without electrics) |
From 700 rub. |
|
|
Installing a Samsung dishwasher (without electrics) |
From 1400 rub. |
|
|
Dismantling the Samsung dishwasher (without electrics) |
From 700 rub. |
|
|
Installing a Siemens dishwasher (without electrics) |
From 1300 rub. |
|
|
Dismantling the Siemens dishwasher (without electrics) |
From 650 rub. |
|
|
Ariston dishwasher installation (without electrics) |
From 1300 rub. |
|
|
Dismantling the Ariston dishwasher (without electrics) |
From 650 rub. |
|
|
Installing an Electrolux dishwasher (without electrics) |
From 1100 rub. |
|
|
Dismantling the Electrolux dishwasher (without electrics) |
From 550 rub. |
|
|
Installing a Gorenje dishwasher (without electrics) |
From 1100 rub. |
|
|
Dismantling the Gorenje dishwasher (without electrics) |
From 550 rub. |
|
|
Installing a Hansa dishwasher (without electrics) |
From 1100 rub. |
|
|
Dismantling the Hansa dishwasher (without electrics) |
From 550 rub. |
|
|
Built-in dishwasher installation (without electrics) |
From 1600 rub. |
|
|
Dismantling the built-in dishwasher (without electrics) |
From 800 rub. |
|
|
Installing a narrow dishwasher (without electrics) |
From 1600 rub. |
|
|
Dismantling a narrow dishwasher (without electrics) |
From 800 rub. |
|
|
Removing a dishwasher from other brands |
From 550 rub. |
|
|
Sealing dishwasher joints |
From 450 rub. |
|
|
Dishwasher drain connection (sealed) |
From 650 rub. |
|
|
Stroba on brick/concrete |
||
|
Strobe for plaster and gypsum |
||
|
Drilling holes for pipes |
||
|
Wiring of sewer pipes (depending on diameter) |
From 750 rub. |
In 2007, the British company Hotpoint merged with the Italian Ariston. As a result, the Hotpoint-Ariston trademark appeared, which quickly gained a reputation as a manufacturer of reliable household appliances.
Today, Ariston dishwashers are distinguished by high European quality and innovations that competitors do not have. In terms of sales, this brand ranks third among manufacturers of household appliances. The range of Ariston dishwashers is surprisingly extensive, and San Remo is ready to help with the installation of any model.
Ariston dishwasher installation cost
Prices for the Ariston dishwasher installation service vary, depending on the individual characteristics and complexity of the installation. We do everything preparatory work and install household appliances. The approximate cost of installation work is from 1000 rubles. For more information, please contact our phone managers listed below.
Features of installing Ariston dishwashers
With us you can call the master at home at any address. The specialist will arrive in a short time, inspect the place of the proposed placement household appliance and will give his recommendations on the choice of equipment (if you have not bought it yet).
When connecting Ariston dishwashers, we pay special attention to the tightness of all connections so that even after a long time there are no leaks that can ruin your kitchen or flood your neighbors. Accuracy, reliability and quality assurance - that's what we offer to anyone who decides to order the installation of a dishwasher in San Remo.
We have prepared good discounts for our customers:
- 5% when ordering services for up to 15,000 rubles.
- 8% when ordering works with a total value of 15,000 to 20,000 rubles.
- 10% for those who order from us plumbing work in the amount of more than 20,000 rubles.
- 10% for all pensioners, disabled people, Veterans of the Great Patriotic War or Labor.
- 5% when ordering services online through the site form.
Installing a dishwasher with your own hands will save you 1200 - 2500 rubles. The work you have to do is not the most difficult. And yet, if there is no experience, then it is better not to take risks and call the master.
But if you purchased a portable PMM, then it is easy to install it yourself - you just need to connect the water supply hose to the faucet with cold water, and lower the drainage drain into the sink.
In general, connecting a dishwasher, located permanently, consists of the following steps:
- Installation of PMM at the place of operation (and dismantling of the old device, if necessary);
- If you bought a built-in dishwasher, then you need to additionally mount it in the furniture and hang it in the facade - here the main difficulty is to make the markings for the fasteners correctly so that the facade is installed evenly.
- Connecting the dishwasher to the outlets for draining and filling water (if necessary, extend the drain hose);
- Connecting to a socket (if necessary - electric installation work installation of sockets, cable laying);
- Leveling the machine;
- Installation quality check.
If you are confident in your abilities, then let's get started.
What do we need
Before you install a dishwasher in a niche under the countertop or connect a stationary model, prepare the tools and plumbing fittings.
Tool:
- Pliers, and preferably an adjustable wrench;
- Insulating tape (vinyl or cotton), it is wrapped around a metal thread on pliers so as not to damage the fasteners when tightened;
- FUM tape for waterproofing;
- Drill;
- Clamps.
Plumbing fittings:
- Waste siphon with 1 or 2 fittings - 2 fittings will allow you to immediately connect the washing machine;
- Tee, ¾ thread;
- The filter providing rough water purification;
- ball valve;
- Hank connecting pipe.
Connection features
So, step-by-step instruction how to connect a dishwasher step by step:
- If you are installing a built-in PMM, then first you need to prepare a niche, which, as a rule, should be 60 cm wide, and for narrow models 45 cm. You can level the machine with the level of the cabinets by removing the countertop and adjusting the legs of the lower cabinets. You also need to drill holes in the cabinet body for drainage, water intake hose and electrical wires.
- Installing a dishwasher hob prohibited;
- The place for installation is chosen so that the length of the drainage hose does not exceed 1.5 meters. It is allowed to increase the length up to 5 meters, but in this case it will be difficult to guarantee the stable operation of the equipment.
- The next step is connecting to electricity. Please note that the socket must be of the "euro" type. You need to replace the socket if it does not meet the standards (but not the plug of the machine). Do not forget that when connected, we ensure safety, and the dishwasher is characterized by significant energy consumption. This determines the ban on the use of tees and extension cords. Installation of the outlet involves the use of a wire with a diameter of more than 2 mm. Besides, in electrical panel in addition, a 16A circuit breaker is mounted. Grounding is also performed using a 3-core wire, and it cannot be brought out to the pipes.
- Next - connect the dishwasher to the water supply. To do this, the water is shut off, a tee is connected to the pipe, then a filter, a ball valve and a hank. All threaded joints are insulated with a fumka - it must be wound at least 10 layers.
It is also mandatory to install a coarse filter, as it will prevent sand and rust from entering the machine from the water pipe.
- As for connecting the equipment to the sewer, here you can go the simple way by installing a siphon with an additional outlet and valve. In order to protect the device from water ingress from sewer pipe, you need to place the drain hose in a special way - at the exit to the sewer network, it is placed at a height of 600 mm along the wall, and then bent to ensure water flow.
- The final step in connecting the dishwasher is to check the device for operability. In this case, the machine is tested idle, controlling the rate of water inflow, its heating, as well as operation in the drying mode. The check is carried out without dishes, but with the obligatory addition of regenerating salt and detergents.
subsequent consultations. In case of sale, transfer
or moving check that this technical
manual accompanied the product.
Read the instructions carefully: they
In case of moving, transport the car to
vertical position. In case of extreme
if necessary, the car can be put back
side down.
This machine is intended for household or
other similar use, namely:
- in rooms intended for cooking
for the staff of shops, offices and other institutions;
- in agro-tourist estates;
- for use by residents of a hotel, motel and
other places of residence;
- in hotels of the "room plus breakfast" type.
Location and leveling
1. Remove the packaging from the product and check that it is
there was no damage caused during transportation.
If damage is found, do not connect the machine,
and contact the seller.
2. Install the dishwasher in the niche of the kitchen
headset, so that the sides or back it is adjacent to
wall or kitchen elements. The product can also
be integrated under the solid worktop of the kitchen
headset
(see installation diagram).
3. Place the dishwasher on a level and
hard floor. Level the machine by unscrewing or
screw the front support legs to perfect
horizontal position of the machine. Precise leveling
guarantees stability and helps to avoid vibrations,
noise and displacement of the machine.
Adjust the height of the rear support by turning
hexagonal red bushing located at the front, in
the center bottom of the dishwasher,
hex wrench opening 8 mm
clockwise to increase height and counterclockwise
clockwise to decrease it. (see sheet with
built-in installation instructions supplied with
vehicle documentation).
Plumbing and electrical
connection
Electrical and water connections
machines must only be carried out by qualified
technician.
The dishwasher must not press on the pipes
or on the power cord.
The product must be connected to a water supply
with new pipes.
Do not use used pipes.
Water and drain pipes and power cable
should be located to the left or right of the
optimal machine setup .
Connecting the water supply hose.
Water connection cold water: firmly
screw the water supply pipe to the threaded tap
3/4 hole gas. Let the water drain before spinning
until it becomes transparent to avoid
clogging the machine with sewage.
Water connection hot water: if in
centralized heating system in your home,
dishwasher can be powered hot
tap water if the water temperature is not
exceeds 60°C.
Screw the pipe to the faucet as described above for the pipe
cold water.
If the length of the water hose is
inadequate, please contact
specialist shop or authorized
plumbing ( see Maintenance).
The water pressure must be within the values
specified in the table Technical data ( see side).
Check that the water hose is not
broken or compressed.
Drain hose connection
connect the drain hose, without bending it, to the drain
pipeline with a minimum diameter of 4 cm.
The drain hose must be located at a height of 40
up to 80 cm from the floor or from the dishwasher platform
machines (A).
Before connecting the drain hose to the sink siphon
take off plastic stopper(V).
Only available on some models
