Make a stork with your own hands step by step instructions. Good stork from a plastic bottle

Olga Druzhinina

It will take:

1. An empty five-liter canister.

2. Steel bar for legs (we took an old arc from the gym and flattened it).

3. Steel wire for the frame.

4. Mounting foam 3 cylinders.

5. Disposable spoons (fortunately there were a lot of them in the garden after the oxygen cocktail).

6. Two simple 1.5 liter bottles (for the neck).

7. 5-liter container from under the water (for wings).

8. About 15 white and a half from under koumiss or ayran (wings and tail)

9. 2 liter iron cans (we found from under the beer) for the beak.

10. Stationery knife with a replaceable block.

11. Red duct tape for legs.

12. Red beak paint and black feather paint.

13. Glue-liquid nails.

14. Copper wire for attaching feathers to the wing and tail.

15. Several self-tapping screws for fastening the wings and tail.

Work description:

They took a steel arc (I asked my parent, he welded a small plate to it and screwed a canister on it). I cut off a corner of the canister and twist it in the shape of a neck and head steel wire inserted into the canister and foamed with mounting foam. Wait until it grabs and holds on.

then cut one and a half from the neck and bottom (I took only the flat part) and, having put it on the neck, she began to foam both the torso and the neck. I did the neck in several stages, waiting for the previous part to dry out.

Then I foamed the whole structure.

After complete drying, I cut off everything unnecessary, giving the structure an outline. stork.

At the spoons, she cut off everything she held and began to glue from the neck.

Separately, I cut a 5-liter bottle in half, formed wings and attached pre-prepared blanks with wire and an awl to the wings (from long to short). Then the wings were attached to the structure with long self-tapping screws.

Then I formed a beak from iron cans and fitted them with the help of the same self-tapping screws. Then painted with red paint. I wrapped my legs with red electrical tape, more in the area of \u200b\u200bthe knees, eyes - a painted spoon.

A small touch from a can of black paint and stork ready!

We all know the song from childhood "Stork on the Roof - Peace on Earth" for a long time. And Alena Zinovieva, already familiar to us from the village of Chastaya Oakwood, decided to plant a couple of white storks in love in her garden, which symbolize peace in her friendly family. These beautiful birds are also made from waste material: plastic foam, metal mesh, plastic bottles and plastic cans.

For the manufacture of storks we need:

1. Two canisters of 5 liters
2. Metal mesh for wings
3. Strong wire
4. Plastic tubes for legs and neck
5. Styrofoam for the head
6. White milk bottles
7. Dark beer 1.5l
8. Hose from a vacuum cleaner (can be replaced with a corrugation)

1. For the head I use construction foam 10 cm wide

2. I cut out the workpiece, highlight the eye sockets, make a flat beak.

3. I grind to smoothness with sandpaper, insert eyes (or beads)

4. I glue the eyelids, strengthen the beak with part of plastic bottle, gluing on the "Titan". At the second stork, I make the beak open.

5. For the body I take 5 liters. canister.

6. I cut off the handle.

7. I bend the mesh in the shape of a canister - this STORK will have wings folded.

8. I round off the "wings".

9. I bend the wire for the legs.

10. A liter milk bottle is cut into 6 feathers.

11. I cut feathers.

12. I start to fasten the feathers from the lower part of the body.

13. I strengthen the wire for the neck and put a hose on it.

14. I fasten a number of feathers to the hose with self-tapping screws.

15. Side view.

16. I cut the halves of milk bottles with a fringe and fasten them around the neck with adhesive tape.

17. I start with the flight feathers on the edge of the wing.

18. The second row overlaps the first by one third.

19. The third and subsequent rows of white bottles.

20. Paws from 0.5 l bottles.

21. Making the body for the second stork.

22. As with the first one, I cut off a part of the canister from above - it is necessary for screwing the feathers.

23. I cover the body with feathers, but, unlike the first, I fasten the feathers to the entire canister.

24. This stork's wings are slightly open. The first row of feathers from 1.5 l bottles (6 pcs from one)

25. I screw the second row only on the rounding of the wing.

26. The third is for the whole wing.

27. I make the tail - it is short, the feathers are slightly parted.

28. Turn the wings over to screw the feathers onto the underside.

29. The last row, covering the edge of the wing, is made from feathers bent in half, rounded on both sides.

30. Approximately so it looks.

31. Each of the subsequent feathers closes the junction of the previous one.

And we will soon meet again with Alena and her new works.

Have you thought, dear readers, that it can be used as ... a material for the manufacture of art objects. Although it may not be art, as such, in its literal sense, but a decoration for the garden - a small sculpture, it is quite possible to do. Indeed, polyurethane foam is unusually plastic, quickly hardens and is easily processed - why not a material for creativity?

Today I will tell you how to make polyurethane foam sculpture of a stork to decorate your garden or suburban area. There are very few materials needed, and they are very cheap. If you pay attention to how much garden sculptures cost in hardware stores, you will realize that the price of a pair of foam cans is incommensurate with their cost. In addition, the stork will work out much better for us. So let's get started.

stork frame

To begin with, we will select a suitable body for the stork - a frame on which foam will be sprayed. A plastic canister from under water with a capacity of 5 liters will do just fine. We make the neck of the stork from wire, and to add volume, you can wrap strips of foam plastic on the wire. The legs of the stork can also be made from wire, and the nose and head can be cut out either from foam or from wood - whichever is more convenient and preferable.

Sculpture making

After making a simple frame, we start spraying foam on our sculpture - we do it carefully, presenting the contours of the finished stork. To make it easier, print out a large bird. If the foam does not fall as you intended, no problem - after drying, the excess is easily removed with a knife. By the way, if you wish, you can use real bird feathers for the tail - who knows, maybe you can do it instead of a peacock stork. After the foam has dried and finished with a knife, we paint the sculpture with ordinary acrylic paint, fix it in place in the garden, and invite friends to appreciate your creative genius. Good luck!

It is very easy to make a stork from plastic bottles with your own hands, a master class will allow you to complete this product in a short time. In this case, it is necessary to strictly follow all the instructions in order to get a really good result. The product can be placed on a personal plot, which will make it possible to decorate the territory.

A master class allows you to make a stork on your own, for which you need to use plastic bottles and other improvised materials. To make the craft look the most realistic, it is necessary to make blanks from plywood. Wings and torso are drawn on them. Prepared templates must be carefully cut.

For work you will need the following materials:

plastic bottles;
insulating tape;
self-tapping screws.

It is better to take bottles that are opaque (white) and dark, and then arrange them, and only red is suitable for electrical tape.

Previously prepared templates need to be connected. To do this, you will need self-tapping screws. To make feathers, white bottles are used, in which dairy products are usually sold. They need to be cut so that strips of the same width are obtained. Along the edges, you need to make many shallow cuts to get a fringe.

The resulting wings are fixed on the body of the bird. To make the mount as strong as possible, use a glue gun. It must be applied carefully, without leaving traces of glue on the body. To make the tail and the rest of the body, which will be located below, you need to use dark plastic bottles. In such containers, for example, beer is sold.

The beak can be obtained from the blank of a plastic bottle, since the stork has a red beak, the base is wrapped with red tape. Need a stork and legs. For their manufacture, you can use a thick wire. For the eyes, take large beads, which are attached to the head with glue. On this, a stork for a garden with your own hands can be completed. It can be placed near a flower bed or on some kind of stand.

Details of the production of the second option

To make a talisman bird for the garden with your own hands, you should prepare the following materials and tools:

empty plastic bottles;
2 wooden beams: thick and wide (will serve as a base);
thick aluminum wire (you can use a rod) to make lower limbs;
polystyrene (thickness 10 cm);
corrugated hose;
plastic canister (2 pcs., capacity 5 l);
metal mesh (under the wings);
stapler.

How to make a stork with your own hands? The procedure will take a little time, but the algorithm of work is simple. On the paths personal plot or a stork will appear in the garden after a few hours of execution.

First you need to start making the head and beak of the bird. These parts are cut out of foam. On the surface, you can either draw eyes with black paint or glue 2 black buttons (you can use beads).

The beak itself must be cut out of a dark plastic bottle. It will consist of 2 parts, glued to the head. To get the body of a bird, you need to cut off the handle from the canister.

Bending tightly around the contour of the canister, bend metal mesh. Remove excess material. You can perform the lower limbs if you bend a rod, the ends of which should be fixed in a wooden block. Plastic feathers are cut from bottles. They are attached to the base of the canister. Attach the tail first.

You can plant the neck of a stork by fastening the wire to the armature. The next step is to put the prepared hose on the wire. Since the feathers on the neck should be small, they are attached with tape. Feathers along the body are fixed on a metal mesh.

Since the bird in the garden will be upright, its wings will be folded. They need to be fixed with a stapler. Feathers should be arranged so that the details of each subsequent row overlap the previous row by 1/3. This will give the craft naturalness and naturalness.

The master class ends with the fastening of individual elements. To give the product maximum attractiveness, you can perform decorative tinting of the beak, eyes, legs. The craft can stand on the street throughout the summer, it is not afraid of bad weather.

Alternative product

The original DIY stork for the garden can be complemented by a baby in the nest. The implementation of this option will help to make the home happy and bring prosperity and well-being to the house. For the manufacture of a stork sitting in a nest, patterns of the Tilda bird are used as the basis. This is a fairly modern and fashionable home-made toy made of fabric. Patterns for her are simple.

Cut out of dense and durable fabric individual elements crafts. The pieces are sewn together with a thread. To give the body volume, you need to fill it with any filler, so you don’t need to completely stitch the bird right away. Burlap, sawdust, straw, feathers, unnecessary flaps, etc. can act as a filler. After completing the filling stage, the hole is completely sewn up.

The beak is made separately. To create it, you need a strong red cardboard. The finished part is attached to the already made head. You can sew clothes. To do this, you need to take measurements from the finished bird. At the final stage, the eyes are glued, the baby is wrapped in a light cloth and placed next to the mother.

If you install crafts on the branches of trees in the garden, when it rains, you need to remove it from there so that appearance product is not damaged. Another such bird is placed on the windowsills, it will be in perfect harmony with indoor flowers.

Based on a fabric stork, the feathers are obtained from white plastic bottles that sell milk or other dairy products. They are fastened together. Finally the wings come out.

Unusual option

Noteworthy is the master class on making a stork, which is based on a large plastic bottle with a volume of 6 liters. To make the head, you need to use foam, which will need to be carefully cut. Do not forget about the shape of the beak and eyes. Black pebbles can act as eyes, which are fixed with glue.

The beak can be made from an ordinary plastic bottle. It also sticks to the head. A large plastic bottle will act as the body. It needs to cut off the neck. Special metal mesh - wings. If the bird's wings are bent, it is necessary to make appropriate bends on the grid.

The legs are made of wire, which is folded in several layers. Feathers will be from light-colored plastic bottles. They are cut so that individual feathers look realistic. Fixing is done with a wire to the wings themselves.

To make the neck look voluminous, the bottles need to be finely chopped, you get a fringe. They are arranged in rows. Small bottles are put on the paws, which are also cut at the base. If the fixation of parts seems weak, then the fastening process can be carried out using self-tapping screws.

Making a stork is not a very long and difficult undertaking. To bring the idea to life, you can use the above recommendations. However, you can make certain adjustments to the idea that will allow you to create a unique and original product.

Each dacha is a small corner of paradise for its owner. And if for some reason this is not the case, something needs to be changed. For example, to make the site more comfortable, lively. Perfect for this garden sculptures, and it's great if they are made by yourself.

One of the guardians of the site is a stork. At least this idea appealed to many summer residents, because the stork nests only where they live good people. This bird is a symbol of prosperity, peace, tranquility, family nest.

Materials and tools

Let's try to make a stork on our own based on a plastic container. We will need the following materials:

a five-liter plastic bottle (for example, from drinking water);
Styrofoam;
mounting foam;
wire;
Scotch;
dye;
brushes.

In the process of decorating, we can use other materials. This stage is entirely up to your imagination and creativity.

Now let's get to the step by step instructions.

The plastic container is the body. We will attach the rest of the parts to it. The neck is a wire, which is lined with pieces of foam, fixed with adhesive tape. With adhesive tape, we attach the neck to the body, that is, to the bottom of the plastic bottle.

We put a piece of polystyrene on the neck - this is the head. We're trying to round it up.
The hips are also made from foam by inserting equal pieces on both sides of the neck of the bottle. We fix everything with tape.
The legs will be from used electrodes. But metal rods of equal length are also suitable, and just neatly folded wire several times.

The beak will be a long nail. You can plant a piece of wood on it.
On top of the resulting layout, we apply mounting foam with our own hands.
We grind. All excess must be carefully trimmed.

Acrylic paints need to paint the sculpture.
Real feathers can be inserted into the tail and wings.

Here is our garden bird!

We will need:

opaque black and white plastic containers;
a sheet of plywood for the template;
self-tapping screws;
glue gun;
red tape.

From plywood we cut out with our own hands a template for the body and wings of a stork. Templates are fastened to each other with self-tapping screws. Feathers are plastic milk bottles. We cut them into strips, make a fringe. The strips must be the same width. We take a glue gun, attach the feathers to the body of the bird. We make the tail and lower part of the body, the bottom of the wings from black bottles (for example, from shampoo). We simply wrap the beak with red electrical tape. Legs can be made of wire and painted. You can draw eyes, or you can buy special decorative ones, in any needlework store there are such (for toys).

The process is laborious, but it turns out very beautifully.

Compositions with a stork

Of course, a garden stork can be quite a self-sufficient sculpture. But after all, you can make everything more interesting by arranging a whole composition.

For example, you can build a stork nest with your own hands. Put dry branches on the wheel from a bicycle or an old cart. If necessary, fix them with threads between each other. Often the branches are also painted with spray paint for structural strength.

Stork from plastic bottles (video)

And your bird can also become the ancestor of a whole bird family in the country. For example, a stork can open a bird gallery, but homemade flamingos, peacocks, herons will continue it ... Fantasy is limitless! Some craftsmen simply paint a plywood blank, varnish it. It turns out such a kind of painting on wood, where fantasy images are combined with your own creative abilities.

Your garden will indeed become a place of miracles.

What else can you make a stork from

We list only the most popular options

car tires (perhaps the most popular option);
forged parts;
plastic lids (but this is jewelry work);
tree;
shells;
disks.

The easiest option is a plywood stork. You simply make a template with your own hands, according to which you cut out the future sculpture. Paint your bird of happiness on both sides with acrylic paints. Or those that you have, covering the pattern with construction varnish on top.

DIY decor for a summer residence (video)

A stork in the country can only be the beginning of your creative experiments. As practice shows, appetite comes with eating: even people who are far from artistic work get a taste, and other interesting characters appear on the site over time. And this is great, they delight not only the owners, but also the guests, who are becoming more and more in connection with such country art.

They say that when luck and happiness do not go to the house, then they must be lured. Put some positive, light sculpture next to it. In this case, everything is used: birdhouses, funny ones and, of course, a stork from a plastic bottle. After all, he is always associated with a peaceful sky, ringing children's laughter and love.

Master class: stork from a plastic bottle

Materials and tools:

plastic canister for 5 liters;
white and black 2-liter plastic bottles;
large diameter wire;
corrugated plastic sleeve;
a piece of foam;
fine-mesh mesh Chain-link;
scissors, stationery knife, wire cutters;
furniture stapler, sandpaper;
acrylic paint, glue for plastic.

To make a stork, you need a large preparatory work. It is necessary to cut out a large number of feathers: long ones for future wings and tail, medium ones for the body, small ones for a slender long neck and head. It is advisable to lay out all the blanks in separate packages, so it will be easier to work when finishing the body.

After the plumage is prepared, it is necessary to make the frame of the figure. The role of the body is performed by a plastic canister, in which the handle is cut off. A wire or rod is pushed into the neck, after which you need to fix the position of the “neck” and put on a corrugated sleeve. From a piece of foam, it is necessary to cut out the head of a stork, proportional to the body. To make the bird look neater, the head must be sanded with sandpaper and then painted.

Next, on the body you need to attach a piece of fine mesh, to which feathers will be attached. To make your stork have a beautiful plumage, overlap the plastic feathers and checkerboard. Smaller feathers, for example, for the neck, it is desirable to slightly fluff, finely cutting the ends of the blanks in the form of a fringe and straightening the strips in different directions.

Usually the stork has white plumage with black edging on the edges of the wings. Therefore, you can either use bottles different colors when creating a bird, or color it at your discretion. It is important not to forget about the red paint, which is needed for the beak and legs. The limbs are made of a metal rod bent in half, which is threaded into pre-prepared holes in the bottom of the plastic canister - "torso". Toes are easy to make from two brown plastic bottles that are cut and folded outward.

There are other options for creating a stork, some of them are simpler, others are much more difficult than the above. Usually, the bird is only decorated with feathers made from plastic bottles, while inside there is a rigid and dense frame made of wood, plastic, polyurethane foam, metal, etc.

In this case, the frame is first prepared according to the sketch, and then the individual parts are connected together. Only after that, feathers are glued to the entire body in several rows. Do not forget about the beautiful ready-made eyes that you can buy in all stores with sewing accessories. Then a beautiful coquettish stork with long eyelashes will settle on your site, which will surely bring love and peace to your house!

An old legend says that God gathered all the reptiles from the Garden of Eden into one bag and ordered the man to throw him into the sea with his own hands. And the curious Homo sapiens wanted to look at the creatures, untied the bag, and, of course, missed everyone. Vladyka became angry and turned this man into a stork so that he would protect other people from all kinds of toads and snakes. Since then, storks have always settled near a person, feed on reptiles and bring us happiness.

Many old pictures depict a stork with a baby. Among the Slavic peoples, it is customary to believe that this particular bird is responsible for childbearing and well-being. If storks settled on the roof, the house will be full of happiness and children's laughter. And if you haven’t settled, then a wonderful stork with a baby can be made with your own hands from improvised material and installed on a skate or on an apple tree in the center of the garden.

bottled happiness

It will take

To make a stork from plastic bottles for the garden, we need to prepare the following materials:

empty bottles;
thick wide board for the base;
a rod or thick wire for legs;
a piece of foam 10 cm thick;
corrugated hose from a vacuum cleaner;
2 plastic canisters with a volume of 5 l;
metal mesh for wings;
stapler.

Master class on making happiness

It only takes a few hours of passionate DIY work to make almost real storks appear on the paths of your garden.

Cut out a head with a beak from a piece of foam, draw eyes or glue black beads with your own hands.

Cut out a two-piece beak from a dark bottle and glue it in place.

We begin the master class on making the torso by cutting off the handle in the canister. Then you need to bend the mesh in the shape of a canister with your own hands and cut off the excess.

To make the legs, bend the bar and fasten its ends to the board.

We are holding a master class on the preparation of plastic feathers.

We attach the feathers to the canister, starting with the tail.

The master class on fitting the neck begins with attaching the reinforcement wire. Then a hose is put on it.

Attach small "feathers" on the neck with tape.

Fix the feathers on the grid.

The stork for our garden will stand with its wings folded, so we simply fasten all the feathers with a stapler with our own hands, overlapping each previous row by a third.

We finish the master class by connecting all the details and decorative tinting of the eyes, beak and legs. This bird can be installed with your own hands in the depths of the garden for the whole summer. It will not deteriorate from the rain and will not fly away.

Tilda stork

Fashionable toys today, hand-sewn from plain fabric according to simple patterns. We will not fully describe the master class for their manufacture.

Cut out the details of the craft from the fabric, sew and stuff with any filler.

Separately, you need to make a beak (can be made of cardboard) and attach to the head. It remains to make clothes, glue eyes, wrap the baby and hand it to the stork.

Of course, you cannot settle such a wet bird on the branches of a garden, but flower pot on the windowsill she can decorate.

Stork with a baby on the nest

Another way to make your home rich and happy is to make a stork on a nest. As a basis, you can take patterns of a tilde bird. Cut feathers out of plastic white milk bottles, fasten them together and make wings, decorating the ends with real feathers. Place a few white feathers on top of your head. Form a tail out of real feathers, sew or glue eyes and a tie, and plant the bird in the nest.

It can be made from ordinary rods, fastened with wire. To get a stork with a baby, put any doll in his wings. The master class on making a lucky amulet is over.

simple happiness

These two rag birds cannot be left on the paths of the garden, and the master class for making the first stork requires a lot of time and materials. Do not be upset and just make a nest and cut a flat bird out of textolite or plywood. Color it in, give it a string bag with a baby doll in its beak and that's it, the stork with the baby has already settled on your roof.

A well-groomed and attractive garden will always please the eye. To make your garden more comfortable, you can decorate it with various handmade ones. Today we'll talk about how to make a stork for the garden and what materials can be used for this.

Let's start with the simplest - PET bottles.

Option number 1. Making a stork from plastic bottles

Before you get started, you need to take a small sheet of plywood and make templates out of it. The templates must be made in the form of the body and wings of a bird, as shown in the image. You will also need opaque plastic bottles (preferably white or black), red tape and self-tapping screws. The procedure is as follows.

Step 1. First you need to connect the previously made templates with self-tapping screws. Plastic milk bottles will be used as feathers. The bottles should be cut into strips of the same width, and then make a fringe on the edges of each of them.

Step 2 Next, the finished feathers must be fixed on the "body" of the stork with a glue gun. It is characteristic that PET bottles of already black color will be used for the lower part of the body and tail (usually shampoo containers are used for this).

Step 3 The beak should be wrapped with red tape.

Step 4 For the manufacture of legs, ordinary wire is used. Eyes for a bird are bought at any needlework store. That's it, the stork is ready with your own hands!

Option number 2. Making a stork from polyurethane foam

Now let's talk about another option for making a stork for the garden with your own hands. Now you need to prepare plastic container for 5 liters, polyurethane foam, polystyrene and adhesive tape. The algorithm of actions should be as follows.

Step 1. First, body parts are attached to the bottle using a container. For the neck, an ordinary wire is used, overlaid with pieces of foam. The hips must be made in a similar way (using foam and wire). An ordinary large-diameter nail is quite suitable as a key.

Step 2 The blank will look at the preliminary stage as shown in the image below.

Step 3 For the legs of the bird (at least in this implementation), used electrodes are used. In the absence of electrodes, you can select a similar material - for example, a thick wire twisted into several turns, or metal rods from thin reinforcement.

Step 4 So, all parts of the "body" of the stork are assembled, but before proceeding to the next step, it is necessary to carefully check the strength and reliability of the fasteners.

Step 5 After that, the entire layout must be covered with mounting foam.

Step 6 All excess is neatly trimmed.

Step 7 Now the sculpture is almost ready. If the mounting foam is already completely dry, then the bird needs to be painted with acrylic paint.

Step 9 Natural feathers are inserted into the wings and tail to make the stork look as realistic as possible. See what a wonderful garden stork you will get (if you do everything right, of course).

Option number 3. Making a stork for a garden from a canister

Before you get started, make sure you have the following Supplies:

five liter cans

plastic bottles (black and white);

· plastic tubes;

· thick wire;

foam plastic;

After that, you need to perform the following sequence of actions.

Step 1. Cut out blanks from foam, use a knife to outline the head. Cut out the eye sockets, make the beak flatter.

Step 2 Use sandpaper to make the surface as smooth as possible. Place toy eyes in the eye sockets (we have already talked about where you can get them).

Step 3 Cut a beak out of a plastic bottle and secure it with glue.

Step 4 From a plastic canister, make the body of a bird, cut off the handle.

Step 5 Cut out a piece of mesh large enough to wrap around the canister. Round the mesh a little so that it looks more like wings.

Step 6 A thick metal rod must be bent and legs made from it.

Step 7 Stork feathers are cut from white bottles.

Step 8 After that, you can proceed directly to the assembly of all elements. Work should start from the "tail".

Step 9 For the “neck”, a corrugation is put on the wire (for example, from a vacuum cleaner) or something similar. Feathers are attached with self-tapping screws. Due to the fact that the wings of our bird are folded, feathers can only be fixed on the stomach and a little on the sides.

Step 10 White bottles are cut in half, fringe is formed at the cuts. Bottles are attached to the "neck" with adhesive tape.

Step 11"Wings" must be done from one edge of the prepared mesh. It is important that the second row covers the first by 1/3. On the third row, white plastic is already used.

Step 12 For the "legs" of the stork, the corresponding blanks are cut from 0.5-liter bottles.

Step 13 It remains only to paint the "beak" and "paws" of the bird in red. That's it, the garden stork is ready with your own hands!

For a more detailed acquaintance with this manufacturing method, we recommend watching the thematic video.

For work you will need the following materials:

plastic bottles;
insulating tape;
self-tapping screws.

It is better to take bottles that are opaque (white) and dark, and then arrange them, and only red is suitable for electrical tape.

Details of the production of the second option

To make a talisman bird for the garden with your own hands, you should prepare the following materials and tools:

empty plastic bottles;
2 wooden beams: thick and wide (will serve as a base);
thick aluminum wire (you can use a rod) to make the lower limbs;
polystyrene (thickness 10 cm);
corrugated hose;
plastic canister (2 pcs., capacity 5 l);
metal mesh (under the wings);
stapler.

How to make a stork with your own hands? The procedure will take a little time, but the algorithm of work is simple. A stork will appear on the paths of a personal plot or in the garden after several hours of execution.

First you need to start making the head and beak of the bird. These parts are cut out of foam. On the surface, you can either draw eyes with black paint or glue 2 black buttons (you can use beads).

The beak itself must be cut out of a dark plastic bottle. It will consist of 2 parts, glued to the head. To get the body of a bird, you need to cut off the handle from the canister.

Bending tightly around the contour of the canister, bend the metal mesh. Remove excess material. You can perform the lower limbs if you bend a rod, the ends of which should be fixed in a wooden block. Plastic feathers are cut from bottles. They are attached to the base of the canister. Attach the tail first.

Alternative product

Separate elements of crafts are cut out of dense and durable fabric. The pieces are sewn together with a thread. To give the body volume, you need to fill it with any filler, so you don’t need to completely stitch the bird right away. Burlap, sawdust, straw, feathers, unnecessary flaps, etc. can act as a filler. After completing the filling stage, the hole is completely sewn up.

If you install crafts on the branches of trees in the garden, during rain it must be removed from there so that the appearance of the product does not deteriorate. Another such bird is placed on the windowsills, it will be in perfect harmony with indoor flowers.

Based on a fabric stork, the feathers are obtained from white plastic bottles that sell milk or other dairy products. They are fastened together. Finally the wings come out.