If a person has a little free time, patience and imagination, and in the house or in the suburban area there will be a familiar bucket from a household goods store, but a real work of art.
Advantages of homemade trash cans and urns:
Saving the family budget.
These bins and bins are brighter and more attractive than standard factory-made items.
These products are original and ideal for a specific home interior or landscape design.
Types of garbage cans, urns and handmade ashtrays
What are the ways to make your own waste containers?
1. Decoration of ready-made trash cans. To do this, just paint them with acrylic paints.
2. Making a trash can from a waste barrel. Having repaired and decorated an old barrel, you can get a capacious and original garbage container.
3. Create a trash can with plastic bottles. To make an attractive and neat trash can, you need to collect ordinary plastic bottles of the same shape. However, they can be not only the same color, but even different shades. The height of the trash can must be a multiple of the length of the plastic bottle.
4. An urn from a small barrel or bucket can also be made independently. Do not throw away old buckets. By painting them with acrylic paints or pasting them with self-adhesive tape, you can make a beautiful and bright urn.
5. You can create an urn from unused car tires. This will require only two or three tires. They need to be washed and fastened inside with metal staples. With the help of a car camera from the outside, it is necessary to mask the joints and cover the bin with a bright acrylic paint. Due to the fact that such an urn does not have a bottom, it is advisable to use special garbage bags.
6. Making an urn with a lid using a disk from a used wheel. To do this, you need to connect the disk to the bucket using metal strips and self-tapping screws. Strips of metal or metal profiles should protrude at least ten centimeters above the edge. Attach a lid of the appropriate diameter to the top of the bucket.
7. Self-manufacturing ashtrays. It is advisable to place such an ashtray near the barbecue or at the entrance to garden gazebo. Absolutely any material is used as a material. However, the easiest and most economical way is to use a regular beer or lemonade tin. Then, cuts are made with ordinary scissors, which should not reach the bottom by two or three centimeters. Usually the width of such strips reaches one or one and a half centimeters. Each individual strip should be rolled or bent.
8. You can create a floor ashtray yourself. As a basis for it, you can use an old can or part ventilation pipe.
It is enough to cover the can fine mesh and decorate and the ashtray is ready. A bucket or a bottom from it should be installed inside the trim of the ventilation pipe. Then the pipe is covered with a net and decorated. After that, the floor ashtray can be used for its intended purpose.
- Today, among summer residents, various products and decorations for the garden and vegetable garden, which are made by hand, are becoming fashionable and widespread.
- As soon as a freed plastic bottle is found in the house, the owners of their homes immediately throw it away and do the wrong thing. If you belong to the category of people who love
- If you want to do for your suburban area figurine of a cat made of concrete, then this requires reinforcing elements. To begin with, you can blind the torso, paws and tail of the cat. During manufacture
- The following information will be useful to you if you have a dacha, and there are no achievements of civilization on it at the moment. Surely, everyone in the country has an unnecessary leaky bucket. Such a bucket
- With a little patience, you can make an “eternal” mesh for a hedge, a fence inside the yard, an aviary for walking small domestic animals from plastic bottles.
In a country house, a personal plot or a private house, the collection and storage of garbage is the responsibility of the owner. The indiscriminate burning or disposal of waste is prohibited by law and is harmful to the environment. Therefore, in order to sort, collect and store garbage before disposal, it is necessary to install bins for solid waste. From improvised materials, you can make your own garbage collectors and compost pits.
According to the material of manufacture, metal, wooden, plastic and concrete containers for the collection of solid waste are distinguished.
What can you make a trash can yourself:
- wooden planks;
- cement mortar;
- plastic bottles;
- old barrel for water;
- metal sheets.
For waste of natural origin - cleaning, food leftovers, paper, weeds, plastic cannot be used, since such waste is very hot during the decomposition of organic residues. For packages, bottles and other waste, bins made of any material are suitable.
Container for solid waste from plastic bottles
PET packaging will serve as a light and free material for the waste container. The advantage of this method is the arbitrary choice of sizes and shapes.
To make a street trash can out of plastic containers, you will need:
- Pliers or pliers.
- Nail or drill.
- Metal rods 6-10 mm, wire 2-4 mm.
- Same plastic bottles.
Stickers are removed from the bottles, if necessary, the container is washed. A hole the size of a neck is cut in the bottom, and the lid is pierced or drilled along the diameter of a thin wire.
The frame is assembled from metal rods so that the structure retains its shape and is durable. To do this, three rings are bent, the ends of which are twisted with pliers or connected by contact welding. The diameter of the circles is selected according to the desired volume of the urn. For the vertical part of the frame, four pieces of rods are cut with a margin of 20-25 cm. The rings are wound at an equal distance with a thin wire using twists with pliers.
The bottles are assembled by threading a thin wire through holes in the ends. The neck of the lower bottle should fit into the cutout of the previous assembly element. The length of the faces of the bottles is selected according to the desired volume.
Bundles of bottles are attached to the frame of the rods of the rings with wire. Twisting is done with tension. Sections can be additionally fastened with hot glue. By alternating the colors of the bottles, you can give an attractive look to the urn.
The bottom is made by weaving with wire or strips cut out of PET containers to make a mesh base. If it is not planned to insert bags for collecting waste, the bottom is braided in a tight step.
If you need a blank base, you will need to cut a circle from polycarbonate, sheet metal or plywood with hydrophobic impregnation. To fix the bottom, holes are drilled around the perimeter, into which a wire is threaded for screwing to the bottom end of the wastebasket.
The resulting container is suitable for collecting household waste. Do not throw cigarette butts and objects that can ignite into a plastic bin. To protect from rain, the garbage collector must be placed under a canopy or roof visor.
Cement Waste Container
To make a stable and durable concrete bin, you will need:
- Sand.
- Cement.
- Copper vitriol.
- Wood saw.
- Polyethylene bag.
- Scotch.
- Nails with a hammer.
First, formwork is made from improvised wooden objects. The sizes are chosen arbitrarily. It is easier to hammer together the outer shape of a cubic shape. The edges are glued with adhesive tape to eliminate gaps.
Prepare a solution from a mixture of river sand, cement and water in proportions - 3: 1: ½, respectively. Half a cup of copper sulphate is added to the mixing bucket to prevent mold and bacteria from growing in the pores of the concrete.
Cement is poured into the bottom of the mold with a layer of 10 cm. Next, you need to insert a box, barrel or other smaller container inside, after wrapping it in a plastic bag or film. The resulting empty space is filled with cement, and the structure is left for a week until it is completely cured.
When the solution becomes strong, the formwork is dismantled, the inner container is removed. It turns out a concrete container for garbage, which still needs to be processed before operation. Irregularities and sharp corners are ground with a grinder, the inner surfaces are covered with bitumen or tar to prevent rotting. Outside, the container can be painted or finished with stones using cement.
Wooden solid waste box
Wooden containers are suitable for collecting garbage in the country and making compost from waste. For manufacturing you will need:
- Boards of coniferous breeds.
- Nails with a hammer or screws with a screwdriver.
- metal corners.
- Polyethylene film or covering material.
- Impregnation against rot.
The waste box in the country should have a collapsible front wall for access to the lower layers of the compost and the ability to turn over the waste. Therefore, first, four sides of the box are assembled using corners with nails or self-tapping screws - the bottom, back and side walls. The lid and front wall are assembled separately to make the trash box collapsible. To fix the top and outer part, you can use hooks or drive in a long nail on each side that can be bent.
Because compost requires oxygen, the boards in the walls should not fit snugly together. The lid for the waste container is complemented by a wooden block handle and folding hinges on request. When the parts are assembled, the wood is treated with stain or anti-rot impregnation. Without processing, the box will decay and become unusable.
Before loading organic waste, a sheet or garden covering should be laid on the bottom of the container. From above, under the lid, the pile can be additionally covered with polyethylene to accelerate the greenhouse effect.
As it rots, you need to take the compost from the bottom and mix the pile. Only organic matter can be thrown into such a box: scraps, weeds, roots, cleanings, paper, straw. For the rest of the garbage, you need to arrange another urn.
Do-it-yourself trash can made of metal
To make an iron garbage bin, you will need materials and tools:
- Sheet steel 1-2 mm thick.
- Rectangular profile or pipe.
- Bolts, washers, nuts.
- Hacksaw for metal.
- Scissors, a circular saw or a guillotine for cutting metal.
- Electric welding machine with 2 mm electrodes.
The urn will last longer if you choose stainless steel as the material. Ordinary iron will rust and thin metal will become brittle.
First you need to cut the blank from the sheet according to the scan. To transfer the dimensions, you can print a drawing of the urn in parts and combine it with adhesive tape. The diagram shows approximate dimensions that can be increased by observing the proportions.
Garbage bin drawing with dimensions
Drawing of a simple conical sheet metal waste bin with a development and dimensions
When the workpiece is cut out, the reamer is bent along the lines in three places, and the joint is connected by welding. Without experience in such work, thin metal can be damaged, burned through, not boiled, or deformed by influxes with reverse side. Therefore, it is better to practice on scraps of steel. To get a thin seam, you need to use electrodes no thicker than 2mm.
Next, the triangular ends are bent towards the center to obtain an even cone and the resulting joints are welded together. For ease of emptying, a U-shaped piece of metal sheet is welded at the bottom, which will serve as a handle.
To make the design stable, a stand is assembled. Two T-shaped parts are welded from a square section profile, which can be fastened together with a horizontal segment for rigidity.
Holes are drilled in the upper part of the finished tank and stand, the parts are connected with bolts and nuts. The finished assembly is cleaned with sandpaper and painted with powder paint. The joints with the legs must be protected with a coating of copper, graphite or lithol grease.
In a similar way, you can make a large-sized waste collection bin according to the following scheme:
Drawing of a truncated metal trash can with dimensions
Instead of a profile for stands, you can use iron pipes or corners. When you need to cut large workpieces, it is better to use electric scissors according to sheet metal.
If there is no welding machine, you can make a trash can from a water barrel. First, rust is removed from the surface, dried, a primer and paint are applied. You can put a trash bag inside to make it easier to empty the container. If the barrel is too high, you can reduce the length with circular saw.
old barrel can be used as a waste incinerator. To do this, you need to punch 5-6 holes in the body. This will create a strong draft when the waste is burned, which will reduce emissions. harmful substances to the air. It is allowed to burn garbage in this way on personal plots, if the territory is not adjacent to agricultural land.
Do you want to equip household plot? Here you can find a lot of original and simple decor ideas. For example, you can make a creative path from a leaf-shaped bud, but today we suggest you create a stylish concrete urn decorated with burdock leaves. You can also choose a ready-made urn in a particular style.
To create a waste bin you will need:
Boards (old trim);
Cement + sand;
Polyethylene film, adhesive tape;
Nails, hammer, grinder;
Burdock leaves (for pattern);
Lacquer for yachts + color.
Waste bin step by step:
Initially, you will need to put together a trapezoid or square from old pieces of boards. The size of the trapezoid (square) should be a larger diameter than the bucket (container) that will be inserted in the center wooden form. Then nail to the mold walls wooden base. Cover the bucket, walls and bottom of the mold with plastic wrap, secure with adhesive tape.
Make a cement mortar: three parts of sand and one part of cement (in this case m-500). The consistency of the solution should be thicker than sour cream. Tear off the burdock leaves and put them in a container of water for a while so that they do not wither. Also, as a pattern, you can use another print at your discretion.
Next, pour cement mortar into the mold, creating the bottom of the future urn (about 8-10 cm thick). Insert a plastic-wrapped bucket in the center into the mold, attach the burdock leaves to its walls (the mold itself). Here you may need the help of a second person. Start slowly slowly pouring the solution into the mold, at the same time holding the leaves so that they do not slide down, and aligning the bucket in the center.
Cover the urn with plastic wrap and leave for a few days (about 5-6). Then turn the urn over, unscrew the screws in the bottom, disassemble the walls. The leaves are perfectly removed under the pressure of the water jet.
If necessary, you can grind the upper part of the urn and the sharp edges with a disk (in this case, a grinder). Paint over with yacht varnish, to which you add color.
Why do you need to make a street urn with your own hands?
No serious costs (use of improvised means), original design, configuration options, reliability and durability with a responsible approach to the creation process.
Which raw material select?
When choosing a material for a future urn, it is necessary to remember that:
- plastic bottles and car tires are not resistant to burning, like wood (barrel, plywood, boards), which is also prone to decay;
- a concrete urn is not easy to manufacture and difficult to move;
- forging iron or a solid sheet of metal will require special skills and equipment for work;
- metal (bucket, watering container) is susceptible to corrosion, but durable and fire resistant.
To prevent rainwater from entering the urn, you must adda visor (cover) and support posts, and for convenient removal of debris, it is better to choose the option with a swivel mechanism.
What design can be given to the urn?
It is possible to decorate the urn with woodcarving or engraving, and as a decor, use gravel, pebbles, various curly elements, mounting foam, varnish or paint for the outer surface.
How to make a street bin from a freon bottle?
For refueling air conditioners and refrigeration units, cylinders with industrial freon are used, which, after emptying, can be adapted for bins.
1. For safety reasons, it is necessary to open the valve of the empty cylinder to the stop and leave it for several days to allow the release of possible residues of the substance.
2. Lay the cylinder on its side, make sure that there is no pressure in it, unscrew the valve or cut it with a hacksaw, pouring water over the cutting site during the process (with the help of another person or a watering hose) to avoid sparks.
3. Through the hole, fill the cylinder with water to the top, shaking to wash off the remains of substances from the walls, drain the water away from the residential area.
4. Saw off the bottom or top (evenly or with patterned edges) with a grinder at the cylinder and place it vertically upside down.
5. Using bolts and a stand, create rotary mechanism or weld welding machine stationary support.
Not everything that we consider garbage is as useless as it might seem at first glance. In some cases, this very garbage can serve as an excellent material for the implementation of the most daring design ideas.
1. Window shutters
Are you thinking of replacing your shabby wooden shutters in your country house? Do not rush to send them to the trash. High-quality painting, a piece of plywood, a wooden countertop and furniture fittings will turn a rag into a charming locker.
2. Brackets for shelves
From unnecessary brackets left after repair and a small piece of chipboard, you can make a beautiful and original organizer for correspondence, books and the press. Such a craft will look especially stylish and noble in white and gold.
3. Skateboard
While cleaning out the garage, did you find your son's old skateboard? Use it to create an original shelf, which is not difficult to make. You need to unscrew the wheels from the board, use an aerosol can to paint it in a trendy copper color and drill holes for the rope. The original shelf is ready, you can hang it on the wall.
4. Wooden window frame
Decided to replace the windows in country house? Use old wooden frames to create original and functional pieces for your home. For example, a high-quality trim, bright paint, a narrow shelf and a few hooks will turn an old window frame into a stylish and functional note board that will be a stunning entryway decoration.
5. Floor lamp
A lampshade from an old hopelessly broken floor lamp can be turned into a charming basket for laundry, toys or magazines.
6. Banks
Too many jars in the pantry? Turn them into cute storage containers for tea leaves, sugar, salt, cereals, cotton swabs and other little things. The process of creating such containers is very simple. Decorate the jars with colored enamel, painting or appliqué, and decorate the lids with beautiful furniture handles.
7. Stand for knives
An unsightly old knife holder can be turned into a fantastic desk organizer for stationery. You only need to slightly modify the holes and give the stand a new bright color.
8. Suitcases
Many have suitcases from the times of the USSR on the mezzanine, but few know what to do with them. But there are a lot of options for non-standard use of suitcases. For example, parts of old travel bags are obtained original shelves, which will become a real highlight of any room.
9. Wooden boxes
Bright hallway shelves are a great way to use up unwanted wooden crates. This storage system will fit perfectly in the hallway. country house and is perfect for storing shoes, hats and bags.
10. Kitchen cabinet
Ordered a new one kitchen set? Take your time to get rid of all the parts of the old one. For example, from a small kitchen cabinet you can get an original table for children's games or creativity.
11. Stool
An old stool that absolutely does not fit into the interior can be turned into an unusual organizer for creativity. Paint and several rag pockets will allow you to store rolls of paper and fabric, scissors and other stationery in it.
12. Vase
Painting and a little decoration will turn an ordinary plastic bucket into an exquisite flower vase.
13. Planters
When changing lamps in the apartment, save a few glass shades from which you can make stunning flower pots. Colored enamel will allow you to transform nondescript details of lamps and turn them into bright home decor items.
14. Table
A cast-iron bathtub prepared for disposal can be turned into comfortable armchair for home or garden. Of course, the process of creating such a chair is quite complicated and time-consuming, but as a result, you will be able to get an exclusive piece of furniture that will decorate any space.17. Hose
A vacuum hose is an excellent basis for creating a wreath that is fashionable today, which can be used to decorate a door or wall.
