How to take a bath out of the bathroom. Full and gentle dismantling of the bathroom - video and detailed instructions

Reading time: 5 minutes

Resins are substances that plants secrete as a result of natural or pathological (disease of fruit trees, especially stone fruits) processes. Their composition is very complex: these are alcohols, essential oils, sugars, acids and other compounds. They are insoluble in water, when heated they become more liquid and melt, and solidify in air. If you know how to remove resin from clothes, getting rid of stains is not difficult. Moreover, most of them are highly soluble in alcohol and ether.

You can stain your clothes with tar, not only walking in the spring forest or orchard: it is contained in wooden furniture and may show up on the surface from time to time. So, sitting on a bench, you can get your favorite trousers very dirty. This viscous substance leaves sticky residue, and if not removed immediately, it will harden over time, and dust will stick to the surface. If such a nuisance happened to your clothes, do not despair. A few simple rules will help you remove dirt, and there will be absolutely no marks left on your clothes.

You need to start cleaning the products immediately. The sooner you start scrubbing the stain, the faster and easier it will be.

Do not put the soiled item in the common laundry basket, so as not to stain the rest of the things.
Just by washing clothes, you cannot get rid of the resin: you will have to use special products.
Before using any product, you should study the product label, which indicates the composition of the fibers and recommendations for care.

Remember that acid and alcohol can damage fabric dye, vinegar and acetone should not be used on viscose and acetate silk products.

Since you will have to deal with solvents, do not forget about safety measures: work with gloves and use a mask. Provide fresh air to the room.
First, check the reaction of the material to the solvent: apply the liquid to a cotton pad or rag and rub in an inconspicuous place, for example, on the wrong seam. If nothing happened to the thing, you can use the remedy.

Fresh tar stains

How to remove the resin if the drop has not yet had time to soak into the fibers? Do not wipe off fresh dirt that appears on the surface. Wet the cloth cold water from reverse side and around the drop and leave in a cool room until the resin hardens. After that, it can be simply removed with your hands or with the blunt side of the knife.

How to remove stubborn resin stains

If the resin managed to soak the material through, you will have to use special tools. They can be used individually or combined.

Solvents

Alcohol. Since resins contain alcohols, they dissolve well in alcohols or liquids that contain more than 50% alcohol. You can take medical or denatured alcohol, toilet water or cologne without color. Apply liquid to a cotton pad and apply to the stain. Leave until the disc is dry. Then pour a little of the product on the stain from above and rinse hot water. Particles of the dissolved resin will be removed, leaving almost no traces. After that, the thing must be washed with powder.
Turpentine. Is a mixture essential oils various parts of pine trees and dissolves resins well. It is also applied to a cotton pad, which is applied to the contaminated area, then the item is washed.
Acetone or nail polish remover. Treat in the same way as with alcohol.

Do not use on acetate silk products, as it can corrode the fabric.

Oils

Vegetable oil is effective against tar stains. It dissolves it even in the depth of the fibers, but can leave a greasy stain, which will also have to be processed. It is necessary to soak the contaminated area well with vegetable oil and rinse with hot water after ten minutes. Then rub with laundry soap or dishwashing detergent, leave for a few minutes and wash.

Iron and paper

If solvents cannot be used due to the not very stable dye, the resin can be melted. To do this, you need soft thick paper or paper towels folded several times and an iron. You need to put the soiled thing between two pieces of paper and iron it on top with a hot iron. The resin will soften with heat and the paper will absorb it. As the paper becomes dirty, it must be replaced with a clean one.

Household chemicals

If the pollution is small, you can use special tool- stain remover. Stain removers are available in different forms, they are applied to the contaminated area and left for some time to act, then washed and washed the product completely. With regard to resin, only certain types of stain removers can be effective. Read the instructions on the packaging of the product, there should be a corresponding mark.

If stains still remain after applying these methods, you can try more aggressive products: white spirit or kerosene, you can also use a soft brush.

If you follow the simple rules of how to remove resin from clothes, the cleaning procedure can be carried out quickly and safely. The main thing is to take into account the type of fibers and use only suitable solvents. When working with flammable liquids, precautions must be taken: use personal protective equipment and work away from sources of ignition.

Resting in a pine forest has little to compare with. Fresh air, intoxicating aroma, solitude with nature... All these joyful feelings disappear at the sight of resin on a car body. It is not easy to remove such pollution, moreover, with inaccurate actions it is possible. We have selected the most effective, simple and safe methods that will make it easy to deal with difficult dirt and preserve the surface of the car.

How to clean resin from a car

There are many ways that allow you to remove pine resin from the body. Not all of them are equally effective and easy to use. Some methods will require financial investments, other options will take a lot of your time. And there are some methods that you should not pay attention to at all.

soapy hot water;
commercial solvents designed specifically for wood tar (available in a wide range and available at many gas stations);
White Spirit;
hand sanitizer;
vodka;

Let's consider each of these methods in more detail.

Effective ways to remove tree resin from a car body

When cleaning resin from a machine, the first step is to wash it with hot soapy water. We draw your attention - the water should be really hot, as much as possible.

White spirit is excellent at dissolving tar, but it can also damage automotive surfaces and dissolve paintwork. White spirit must be applied to a soft cloth, applied to the dirt and rubbed a little without effort.
Known and loved by all motorists, the “Vedeshka” or WD-40 does an excellent job with similar and many other contaminants. The product must be applied directly to the sticky spot, wait a bit and remove the resin with a rag.
The usual hand sanitizer, which is sold in pharmacies and supermarkets in checkout areas, can surprise you with its ability to cope with sticky stains on cars. The principle of using such a tool is similar to that described above. The product is applied to the stain, left for a while and then removed with a rag.
Ordinary vodka, even the cheapest, has a similar effect. It is used in the same way.
Goo-gone is a household tool that is very popular among Russian housewives. Oddly enough, but Goo-gone is able to corrode the resin, even frozen and fairly boiled.

We have described many ways that allow you to remove pine resin from pine resin. Which of them did you like the most? Do not rush to buy auto chemicals and review home stocks. First you need to try to wash the car with hot water.

The interior made of natural wood looks very solid, presentable, soft and pleasant. Coniferous material is especially valuable, which also contributes to the natural healing of all residents of the house during operation. But there is one problem that arises when laying softwood - how to get rid of resin on the boards, which must be solved correctly. How to remove resin from a tree in a pine bath or steam room? That is what this article will be about.

Why remove resin?

Coniferous wood species such as pine, spruce, larch are unusually beautiful, but they emit natural resins not only after sawing, but also during growth. This resin is a very viscous, fluid substance, so the process of interior decoration is much more complicated, because:

Boards where the resin leaks out become extremely sticky and will quickly bond to whatever tools and materials they come into contact with.
Usually, the areas where the “resin” flows out look a little darker than the whole board, so the uniformity of the coating cannot be achieved.
Staining to perform with the resulting substance is impossible, and unprofitable. Paint or varnish will not harden on resin stains, respectively - there will be convex, unprotected from the harmful effects of moisture, areas of the coating that stand out by their color.

What do you need to know about resin?

Resin removal is best done only after the board has been sanded. Although compliance with this rule will not be a guarantee that the "resin" will not prove itself again. Sometimes such a substance begins to ooze under the influence of certain factors after completion finishing works. This factor must be taken into account before giving preference to coniferous decoration of the house.

How to remove resin from the board?

In order to properly prepare all the elements for laying the floor, wall cladding or ceiling, you need to correctly get rid of the resin on the boards. This can be done in several ways.

Mechanical removal

In this case, in order to remove the resin from the boards, it is necessary to wait for the complete solidification of the fluid mass. Then, armed with a knife, remove each piece by hand.

Important! After removing all unwanted sagging, it is necessary to sand the surface of the wood with sandpaper or a special tool.

Solvents

To dissolve the "resin" you can use improvised chemistry. The following tools are suitable for this purpose:

alcohol;
White Spirit;
turpentine;
refined gasoline;
acetone;
nitro solvent.

Important! The use of any of these solvents does not affect the structure and shade of softwood. But when using it, it is advisable to protect yourself with gloves, a respirator so that caustic volatile vapors do not provoke irritation of the skin and mucous membranes.

Other ways and means

You can also get rid of resin on the boards with the help of folk methods, which consist in the use of available kitchen and pharmacy solutions, powders.

The following methods effectively help to solve the problem:

Ammonium chloride or ammonia solution. Such a tool is diluted with acetone in a ratio of 2: 1. Apply to the surface with rubbing movements until foam is formed. Remains of foam and resin are removed after 20 minutes with a clean, damp cloth.
Potash and soda in equal proportions (50 g each). Both substances are mixed and poured into 1 liter of hot water. To enhance the effect, you can add 250 ml of acetone.
Caustic soda. It is dissolved in half a liter cold water. You can also add 250 ml of a solvent such as acetone.

Important! Any of these products can only be applied to a sanded, but not painted surface. Otherwise, acetone will dissolve the paint and the finished finish will not look the most attractive way.

Safe Recipes

In order not to damage the wood either mechanically or chemically, or in the case of a small amount of resin, use the following products to get rid of the resin on the boards:

25 g arboreal or any liquid soap mixed with 50 ml of ammonia and 1 liter of hot water;
acetic solution of concentrated acid and water in a ratio of 1:50.

Important! The last resort is also well suited to remove alkali residues after using any other substance or solution to get rid of the resin on the boards. It helps a lot, including when you wash ready-made walls and you need to remove the remnants of the cleaner from the joints of the crowns.

When the walls are already sheathed

If the resin began to appear from the boards after they were laid on the walls, you are unlikely to have a desire to spend a lot of time pointwise removing each piece of “resin” with solvents or a knife.

In this case, you can burn all the places where the tree sap is formed. blowtorch, after cleaning them with sandpaper of a suitable degree of grit.

footage

When giving preference to a coniferous board, remember that you will not be able to completely get rid of the resin on the boards. It can appear at any, the most unexpected moment for you. But this is actually not such a global problem, because it is possible to remove the “sap”, and the beauty, environmental friendliness and benefits of such wood cannot be compared with any modern plastic or other material. Let your home be filled with only the pleasant aroma of pine needles and always look cozy. And with minor resin problems, you now know how to deal with it.

If suddenly you find characteristic dirt on your clothes, remember the main rule - pine resin cannot be washed off with water. It can only be removed mechanically, that is, by directly tearing it off the fabric. Coniferous resin has a complex composition, therefore, in order to get rid of it, it will be necessary to make some efforts.

First aid

When you see the resin, scratch it with something sharp. If you have a knife - great, you can use it, and if you don’t have it at hand, find handy tool. Remember, the sooner you get rid of the sticky substance, the better. Otherwise, the resin will penetrate deep into the structure of each thread.

Once you have removed everything that was possible with a knife (be careful not to damage the fabric itself), send the thing to the refrigerator, and even better - to freezer. The remaining tree resin will harden and become brittle and can be easily removed. True, after that, stains from the resin will still remain. And further. A thing made of very thin, delicate fabric does not fit into the freezer.

To get tar stains out of clothes, a knife and a freezer are a must. Only after manipulating them, you can start serious work on the soiled thing. Until then, all actions will be useless.

Cleaning methods: 7 options

There are several ways to clean clothes from resin. The most important thing is not to despair when you see that the first option did not work, but to try all the methods in turn. One of them, or even all together, will definitely give a positive result.

Alcohol

Peculiarities . It is probably one of the most simple ways. You can use it both at home and in nature (if you brought a combustible substance with you, of course). By the way, instead of alcohol, turpentine is also suitable. Finding him is more problematic, but the help from him is significant.

Preparations:

a rag (rags, sponge, napkin, cotton wool - everything that will not be a pity to throw out later, but always clean);
alcohol (or turpentine).

Process

Moisten an unwanted rag with alcohol.
Blot off the resin residue.
Repeat over and over until the result appears.
Try not to wipe the resin from the clothes, namely to remove the contamination.
It is necessary to start chemical reaction, after which the thing will become clean.
Do not rush, try to act carefully, without fuss.
Everything can take up to half an hour.
Don't forget to wash your clothes afterwards.

Iron

Peculiarities . You can try an innovative tool - remove the resin with an iron. This method is good with delicate thin fabrics.

Preparations:

towels or napkins (thick paper), you can use unnecessary rags (but clean);
iron;
ironing board or table with cloth.

Process

Heat up the iron.
Put a towel on the ironing board.
Put a fabric with a stain on top.
On the stain - again a paper towel.
Iron the stain, periodically change the towels, until the stain disappears.

Resin under the influence of hot melts and seeps onto towels. You will only need to wash your thing after the procedure.

Petrol

Peculiarities . You can remove pine resin from clothes with gasoline. But not the one you fill your car with, but the cleaned one, which is sold in many hardware and hardware stores. Not suitable for delicate fabrics.

Preparations:

petrol;
rag or clean rag, cotton wool.

Process

Wet a rag.
Wet the stain.
Wet the stain.
Repeat until you see the desired result.

The only downside to this method is the smell. It will be necessary to thoroughly wash the clothes with the addition of conditioner and laundry balm - this is to get rid of the specific aroma.

Nail polish remover

Peculiarities . Resin can be removed from clothes with regular nail polish remover. You can also use a solvent or acetone.

Preparations:

acetone;
rag (cotton sponge, clean rags).

Process

Dampen a cloth with nail polish remover.
Wipe the stain until it disappears.

Perhaps the procedure will take longer than you planned, but nail polish remover is, of course, exactly what every woman has in her cosmetic bag.

Dishwashing liquid

Peculiarities . Good way, if you do not know how to remove resin from clothes made of fur or wool. This method is also used if the resin has got on the hair or fur of the animal.

Preparations:

vegetable oil;
cotton wool (sponge);
dish detergent.

Process

Moisten cotton wool with oil.
Lubricate the place where the resin was abundantly.
Wait 10 minutes.
Moisten the cotton with dish detergent.
Wipe the stain with cotton wool until the trace disappears.

After the manipulations, it is necessary to wash the product well, wash the hair thoroughly or bathe the animal. Repeat if necessary.

Coca Cola

Peculiarities . Here's a really interesting way. You will never believe how to remove tar from clothes. Your favorite sugary fizzy drink: Coca-Cola, Pepsi-Cola, Sprite or Fanta.

Preparations:

soda bottle;
basin.

Process

Pour the drink into a bowl.
Dip the item with the stain in the liquid.
Leave for two hours (at least).
Scrub the stain with a soft toothbrush.

It may sound strange, but all these drinks soften the tar very easily, so getting rid of it is not at all difficult.

Stain remover

Peculiarities . You can also get rid of tar on clothes with the help of a stain remover or even bleach - industrial chemical substances, which are designed to remove various contaminants from fabrics.

Preparations:

stain remover (at your discretion - bleach);
water (if the product is dry).

Process

Pour a spoonful of stain remover onto the stain.
Add some water to make porridge.
If the stain remover is liquid, pour a little on the stain.
Rub into the stain.
Leave for a while.
Wash as you normally would.

This is the easiest way, but it is not always effective, as it helps only in one case - if the tar stain is fresh.

Often there are traces of tar on clothes - a black resinous substance that is added to asphalt or patched roofing. Basically, jeans and trousers in men who are directly involved in these works suffer from this. All of the above methods are also suitable for removing not only wood resin, but also tar.

How to remove resin from clothes so as not to ruin the fabric

Not every product can immediately clean the resin from clothes, you may have to repeat the procedure several times or change methods. The main thing to strive for is not to make the area of pollution larger and not to spoil the fabric. Here are five rules that you need to know to prevent such troubles.

Prevent holes. If you apply acetone to silk, and then rub it a little, you can get a hole.
Prevent lightening. If you stain bright clothes, do not use alcohol, otherwise it will change color.
"No" to white spots. If you have jeans or a denim jacket in resin, do not use any acid, otherwise there will be a white spot.
Keep white. Remove resin from white fabrics with bleach first.
Avoid "surprises". First of all, wet the product from the wrong side. It is from the inside and start removing pollution.

In order to limit the size of the spot and prevent its increase, use the following rules:

dampen the cloth around the resin with water;
any remedy on a small speck should be applied with a pipette;
sprinkle talc or starch around the stain, and then start the procedure;
instead of cotton wool, a cotton swab is often used;
start removing the stain from the edge to the center, then you will definitely reduce its area.

Try to get rid of the resin as soon as you see that you have contamination on your clothes. Under no circumstances wash such a thing in the usual washing machine, otherwise you can spoil the thing and the technique. If you need to remove the resin from the skin, use vegetable oil. Do not immediately wash the stain with soap.

If, nevertheless, you didn’t succeed in washing the pine resin from the clothes, because the stain is huge or old, but it’s a pity to throw out the thing anyway, be creative. You can make an applique, sew on a bow, a flower or an image of a cartoon character. IN last resort- sleeves can be cut off, and shorts can be made from pants.

After a good picnic in the woods or a walk in the park, an unpleasant find may turn up - a tar stain. Resin often gets on clothes when you take pictures near trees or just lean against them. You can also get things dirty by bringing home on New Year live pine or Christmas tree. And, since resin is a rather corrosive substance, the question remains how to remove pine resin from clothes.

Preparing to remove resin from coniferous trees (pines, spruces)

Before you start washing the outfit, you must first treat the place of contamination. You can clean the resin from pine from clothes by following a series of procedures:

mechanical removal. If there is a lot of resin, it must be very carefully separated from the fabric. You can use a knife or a thin blade, but it is important to understand that the latter can cut through the fibers. Therefore, with sharp objects, only the top of the pollution should be cut off. If the resin has already spread over the surface of the material, this step can be skipped.
If a small thing is dirty - a blouse or a thin dress, then such outfits can be placed in the freezer until the stain freezes. Then rub it well.
What follows is a radically opposite method. Put a few napkins under the contamination and another one on top. Heat the trace of resin with a hair dryer. The resin should be absorbed into the wipes. The same can be done with an iron. Just be sure to iron through the fabric.
Advice. To prevent the borders of the stain from growing during heating, treat the edges with cold water. And it is better to sprinkle with starch or talc.
Wash the stain with laundry soap or dishwashing detergent.

Effective means and methods for removing resin from pine and spruce from clothes

If, after the previous manipulations, you still failed to get rid of the trace of coniferous resin, then you need to resort to the use of heavy artillery.

Vegetable oil

This is just the case when a wedge is knocked out with a wedge. To remove a pine tar stain, apply a small amount of regular sunflower oil, slowly rubbing from the edges to the center. Leave for 20 minutes. Then wash with application laundry soap or dishwashing liquid.

This method is especially good for wool and carpets. The oil will also help remove resin from leather items.

Alcohol

You can use both medical and technical alcohol. Dampen a clean cloth with ethanol and rub into the stain. You need to start processing from the wrong side and move from the edges to the center. Then repeat on the front of the outfit.

This method is good because it does not harm colored fabrics and can be safely applied to any clothing.

Important! For the resin stain to dissolve, you need to try pretty hard. It will take about half an hour to process the pollution, constantly moistening the napkin with alcohol.

Turpentine or gasoline

If ethanol is not at hand, then turpentine or refined gasoline can be used. The chronology of actions is the same as with alcohol - rub into the fabric until the stain dissolves, then wash. Washing will need to be resorted to more than once, as these substances leave a strong smell.

Do not use these liquids on silk and synthetic materials, as a hole is formed instead of a stain.

Important! It is forbidden to use gasoline for cars - it will leave stains on clothes and then you have to get rid of them. You need to buy refined gasoline in the store.

White Spirit

It is used to dissolve oil paints and varnishes, and it can easily remove pine resin stains from clothes. Dampen a cotton pad with the substance and rub it into the stain. Kerosene can be used instead of white spirit. It is then worth rinsing thoroughly under the pressure of water, and washing with an air conditioner to remove an unpleasant pungent odor.

Important! This method should not be applied to colored and delicate fabrics. If there are doubts about the compatibility of the material and the substance, then it is worth applying a small amount of solvent to the purl hem and wait.

Nail polish remover

If the previous liquids are mainly for those who have recently made repairs or are planning to do it, then almost all women have a nail polish remover. It must necessarily contain acetone (a gentle solution will not give the desired result).
The algorithm of actions is the same as with turpentine and white spirit. Rub into the stain until complete dissolution occurs and wash.

Stain removers

Unfortunately, they are not effective on all types of fabrics. But still, it is better to start processing with them, so as not to use an aggressive agent with a pungent odor.

Stain removers come in liquid and powder form. They should be lightly rubbed, starting from the edges. For these purposes, it is better to use a brush of medium hardness.

Cola or Pepsi

A very unexpected remedy on our list. Strange as it may seem, ordinary Coca Cola can help get rid of traces of tar. Contaminated clothing should be placed in a basin with a carbonated drink and left in it for 5-6 hours. During this time, Cola must remove the resin of coniferous trees from things.

Starch, turpentine and ammonia

If it was not possible to defeat the stain with one of the above mechanical or chemical methods, it is worth taking a closer look at folk remedy, which consists of turpentine, starch and ammonia (aka ammonia). It is necessary to mix the ingredients based on the calculation for one tablespoon of starch, 5-7 drops of turpentine and ammonia.

The resulting paste should be applied by rubbing on the stain and left for 12 hours or overnight until dry. Then clean with a stiff bristle brush and launder as usual.

Advice. This method is well suited for old stains, but it is worth trying the product on the wrong side of the product first, because. turpentine is able to destroy thin tissues, and ammonia has a bleaching effect.