Wall hanger in the hallway for clothes. DIY ideas

Coming home, we try to quickly take off our shoes and outerwear. Simply tossing it on a chair or chest of drawers is a sure way to wrinkle your wardrobe and bring even more clutter to a small room. The problem is solved in 2 ways - by installing a closet or equipping a small hanger in the hallway, in case there is very little free space.

These small storage systems will be discussed in today's material. Today, picking up furniture for a home is not difficult, and regardless of the size of the room. But if it was not possible to decide on a suitable model, rely on own forces, having previously prepared a sketch.

Do-it-yourself suspension manufacturing

For hospitable hosts - a product of paramount importance, it is she who is used to place things in the corridor. Traditionally, it is located in close proximity to front door to in dirty shoes no one walked on the floor. The variety of this furniture impresses even experienced designers. It is easy to choose a beautiful model that matches the interior. It can also be made by hand.

Wall furniture must meet 3 criteria:

reliability;
constructive lightness;
convenience.

Before, it is necessary to decide in advance on its appearance and functionality, to clarify the material from which the walls are made.

In the case of drywall, wall furniture is not suitable. The best option - floor solutions. From mount to surface finishing material It is better to refuse initially, so that you do not have to restore it.

To attach products to such walls, special dowels, special tools and equipment are required. Without preparatory measures, the structure may not be able to support the weight of furniture and things, which is fraught with the fall of the structure.

In this case, floor models with a number of hooks look better. They do not fall as things are evenly distributed along the entire length. The main advantages of such products are mobility and minimum weight, with high reliability. For the hallway, the easiest way is to make a hanger with your own hands from wood, chipboard or fiberboard. The finished product is decorated with an ornament, a pattern, or simply painted with paint, opened with varnish.

Step-by-step instructions for making a wooden hanger

Traditionally holds the palm natural wood, since it is easy to give it any shape, in accordance with the prepared sketch.

The most beautiful hangers are made of wood. The structure of this wood is fragile, so when screwing the hooks, you must be extremely careful.

You must first prepare the following tools and materials:

set of wooden boards suitable form and sizes;
screwdriver;
sandpaper ("micron");
jigsaw;
hooks;
hacksaw with small teeth.

Prepare wooden blanks of a suitable size. The material must be sanded. To form a perfectly smooth surface, sandpaper is passed over the wood. As for the finish, here you can be guided by your own taste - open the surface with paint, varnish or stick decorative paper on it. At the final stage, hooks are attached to the board (with a screwdriver).

wall mount

A do-it-yourself hanger in the hallway should not only be beautiful and comfortable, but also securely fixed to the wall, withstand the weight of outerwear. Experts distinguish 2 ways of fixing furniture.

The easiest way is to drill the hanger through with self-tapping screws, thereby securing it to the wall.
A more difficult method is to prepare on the back of the hanger 2 metal hinges, and then use them to fasten the hanger.

The process is completed - the wall furniture is ready for use.

Before making a final decision on the manufacture or purchase of a clothes hanger, it is important to consider a number of nuances. First of all - the presence and area of a free zone for furniture placement. In the second - the style of the hallway and other rooms in the apartment or house. Thirdly, the height and location of the furniture.

Criteria for choosing a hanger for a corridor or hall:

the product should visually echo or complement the main style of the room;
for classic interior suitable wall hanger;
decoration of minimalism will be a floor model.

Outdoor furniture is characterized by conciseness and lightness. If necessary, it can be quickly removed or moved to another place. This is one of the best options for a medium sized hallway. Be that as it may, a hanger is an important practical attribute of any interior, regardless of size and style.

Such furniture takes up a minimum of space, but accommodates a large number of things. A separate hook is assigned for each wardrobe item, so there are no problems or inconveniences with finding the right things. Near the front door, you can organize a compact storage system in which there is a place for hats, umbrellas, and bags.

Fixing hooks and hangers

There are several basic ways of attaching hooks and hangers to the wall. You can go the path of least resistance and fix the product without special equipment. But connoisseurs of sophisticated and original solutions should think about this issue separately. In the case of wooden hangers, they are often limited to metal hooks. Such systems are attached to the wall with screws.

As for the hooks, they differ in the way they are attached:

magnets;
suckers;
adhesive segments (horizontal or vertical orientation).

Their installation requires a minimum of time and practical skills, which is why they have gained immense popularity among consumers. But the elements listed above also have a significant drawback - they cannot withstand a lot of weight (it will not work to hang a sheepskin coat or a fur coat on them). Their scope is limited to headwear and light accessories.

Coming home, the first thing we do is take off our outerwear and hang it in a closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors of various shapes and sizes.

Due to the simplicity of the design, it is not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

H low cost of the product;
V the ability to achieve the best combination with the interior;
AND individuality of the hanger: your friends and acquaintances will not have this;
R academic work is highly valued.

Original wall hangers in the hallway are an important and integral element of the interior.

Before proceeding with the manufacture, you need to analyze the shape of the corridor. If it is elongated enough, it is better to give preference to a long hanger with compact shelves or no shelves at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, prevailing colors.

The simplest type of hanger is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, as well as several smaller ones, fastened together.

In the traditional version, the wall hanger is a bar on which hooks and pins are located.

If you want to show your creativity, you can make a custom model. For example, an excellent hanger for a nursery will turn out if you create a blank in the form of a cloud, tree or twig. For the corridor, it would be better to cut out something else: horns, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room.

Materials and tools

Now, in almost every hardware store, the buyer is provided with such a rich assortment that it will not be difficult to purchase everything necessary for a wooden hanger to be created with your own hands in the shortest possible time.

DIY wall hanger in the hallway - simple work happy with the result.

To do this, you should buy or prepare the appropriate tools:

jigsaw
Hacksaw;
Blowtorch;
Sandpaper;
Screwdriver or hammer;
Awl;
Pencil;
Roulette.

Tools to help you get the job done.

From the materials you will need:

A piece of wooden board;
screws;
Hooks.

Materials for the future hanger.

For decoration:

Primer;
Paint brush or roller;
Lacquer or other coating;
Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

hanger manufacturing process

A classic do-it-yourself hanger for the hallway does not require significant effort. Production takes a minimum of time. Initially, it is necessary to think over the design in detail, it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing with a pencil or marker.

Then you should get a wooden sheet (or board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out blanks of the required shape, observing the contour. If you want to make the edges embossed, you need to go through them with the same tool.

It is necessary to process the roughness, sand the cut points and sand.

Next step - giving the desired appearance. For firing the boards you will need blowtorch, which is successfully replaced by a gas burner. At this stage, care must be taken not to injure the fingers, and not to spoil the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the assembly of the product is carried out using screws.

The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening in dowels with screws. The reliability is determined by their length.

A DIY wall hanger can be fixed in several ways.

Another, no less popular way is to do through holes. After their creation and processing, screws or nails with a long leg are skipped and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. You can arrange them randomly, in one or more rows.

It can be fixed with the following devices:

"Suckers";
adhesive strip;
Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is suitable only for hats.

Any bold design options will favorably emphasize the relevance and originality of the interior.

Making hangers from longitudinal and transverse boards

This design resembles a lattice; it involves the manufacture of a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, it is conditionally possible to distinguish two layers: the first- transverse, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber with a width of 10-20 cm and a length of 1 m. Having decided on the size, you should get the required number of blanks.

How to assemble the hanger.

After that, it is necessary to process them so that there are no bulges, chips and roughness, paying special attention to the edges. Then it is necessary to decompose first the first layer, observing parallelism and the same distance between the planks. If everything suits you, it's time to move on to the second level. Armed with a screwdriver (or, in its absence, a hammer), fix their position at the intersection.

A simple hanger option for self-production.

Hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. for hanger, outer side which is formed by vertical boards, you can create several levels by attaching hooks to each of them.

Hanger dimensions with shelf.

decoration

You can complete the production by giving the product the original appearance. The most interesting surface will be if:

Before proceeding with the coating, the wood should be cleaned of traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizale is a transparent paint that, with some effort, forms a textured surface. Before starting work, you should dilute the glizal with water, according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. It is necessary to act quickly, otherwise the coating will harden in half an hour. For artificial aging of wood, a type of varnish such as craquelure is used.

It is applied to a pre-painted surface, which as a result is covered with small cracks.

Decoupage allows you to create wooden products suitable for any interior. Most often they resort to it when they want to get furniture with the effect of antiquity and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface, evaluate how they will look.

If everything suits- smear the wrong side with glue, attach to the tree and level it so that bubbles do not subsequently form, then cover with furniture varnish and leave to dry completely.

Which finish to choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. It is better to complete the work by applying varnish and craquelure.

VIDEO: Stylish hangers in the hallway.

Do-it-yourself clothes hanger is a fruitful idea. Theater begins with a hanger; house too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing a guest looks for is where to hang outerwear. And if the hanger is clearly home-made, but comfortable, stable and durable, a positive reputation for the owner is provided.

The second argument for making a hanger with your own hands is prosaic: purchase prices are clearly disproportionate to production costs. A homemade clothes hanger will save you quite a visible amount in the budget. It is not difficult to make it, it will take a little material, and waste from repairs will also go into business. The tool in most cases can be dispensed with by hand.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is frame, see below, because. On such hangers, it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If it was possible to shield the house, then the floor hanger best option. The cost of floor hangers is significantly higher than wall hangers, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

It has already been said enough to make a choice, as long as there is enough floor space. However, let's finally compare how attractive a hanger is in a floor-type hallway:

Clothes hung on hangers dry faster, do not stretch; the collar and lining are not torn.
On a hanger approx. 1.5 m fits a seasonal set of clothes for the whole family, which will save on the closet and the area under it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its area.
With correctly calculated dimensions of the hanger, neither the wall from the clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with the rearrangement of furniture; after moving the hanger, it is not necessary to seal the mounting holes in the wall.

However, floor hangers are different, and not all of them are most suitable for living quarters. For example, for orders (from the old Russian “order” - office, office, office) floor lamp hangers, pos. 1-4 in the figure, it is inconvenient to hang clothes on hangers. Due to the small area of support, they are rolled, especially loaded with wet winter clothes. To emphasize the functional inferiority of the product, such hangers are called hangers, and they often go on sale under this name.

The best option is the same theatrical wardrobe frame hanger, pos. 5. In the version for residential premises, it is supplemented with shelves for hats, shoes and gloves / scarves; perhaps an additional tie rod, pos. 6. Disadvantage - the "legs" of the hanger get underfoot. In an attempt to get rid of it, hangers were invented - frames on a stand, pos. 7, but generally speaking, they fell even more than the orderly ones hung up. Another option is a hanger-frame without legs, leaning against the wall; we will remember this one. There are also folding frame hangers, but in everyday life they have almost no advantages.

If in the hallway with a place is generally tight, then a wall hanger is still more suitable. Simple wall hanger-sconce, pos. 1 in Fig., is as compact as possible, but not at all more convenient than the order, except that it does not fall from the next jacket to one side. Hanger-shelf, pos. 2 won't fall off if it's attached properly, and neither will hats/caps, but the wall and clothes rub against each other.

Wall hanger panel, pos. 3, saves the wall, but not the clothes. Most of all, leather things wear out on such hangers. Tanners jokingly advise: how, they say, to distinguish a sheepskin coat from full grain leather from it from reverse? The first, with everyday use of a hanger-panel, loses its appearance in 2 winters, and the second - in half a winter. Given the cost of genuine leather products, this is no good. Therefore, hangers-panels on the wall for expensive things are often supplied with soft upholstery, pos. 4. As for wall hangers with an openwork shield, pos. 5, then in this case its meaning is only decorative: it does not protect either things or walls.

There are also floor hangers-panels with a stand, for example. in the form of a cabinet, chest or chest, pos. 1 in fig. on right. This is not the best option: someone will once put something on the lid, and with the clothes removed from the hanger it will be whisked to the floor. Much more practical are floor hangers-panels with a bench, pos. 2. A flower under the seat is a matter of taste for the owners, if only he survives there, but the shoe box or chest for accessories to care for her in the banquette drawer is the place.

Clothes and keys

Regarding hangers-panels, an amateur master appears additional opportunity, namely: to provide such a sidewall on the edge farthest from the front door. Perhaps not reaching the bottom, with a bevel or notch. The factory ones do not do this: the hanger should be designed for clothes sticking out from the side. One sidewall almost does not interfere with this, but it is not known how the hanger will stand with the buyer, and it is unprofitable to make right and left hangers.

What gives such an addition? Place for the housekeeper, invisible from the threshold. In the same place, on the side, there may be a dressing table or cabinet, but the main thing is that the master's keys will not catch the eye of a casual visitor, and they are in sight, according to criminologists, a serious factor in spontaneous illegal actions, without which, i.e. temptation, the visit of a not entirely trustworthy subject would have done well both for the owners and for him. You can, of course, luxuriously decorated and with secret constipation, but this is a lot of work and material costs. And so - a simple plank with hooks will do. Or just hooks screwed to the sidewall outside of the stowage section.

We will assume that a suitable design has already been selected, and let's take a look at how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; more convenient in some cases. Let's start with floor hangers as the most functional.

floor standing

Lovers of crafting from the heart, having a milling tool for wood, can immediately take up the floor frame hanger with legs. Made of small-layer hardwood (oak, beech, hornbeam, walnut, birch), it looks chic, and it will take only 360 mm of the floor in width.

A suit hanger works well as a prototype, you just need to make it higher and move the trouser bar up so that you can hang coat hangers on it. Instead of a tie rod and handles, a shelf can be installed, and a shoe shelf is mounted below. Drawings of such a hanger are shown in Fig.:

With the indicated other dimensions, the structural and overall width (dimensions 430 and 460 respectively) without compromising strength and stability can be increased by 1-1.4 m, i.e. the hanger will be already a family width up to more than 1.8 m.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and a bachelor can also have a skirt with lingerie there. Sometimes life is life. It is also more convenient to hang clothes on hooks for a short time. Therefore, in frame hangers, sometimes runner hooks are put on the main bar (the former trouser bar in Fig; height 1360). They or hangers, depending on the need, are shifted to the side in a crowd. But the hook-runners under the fingers turn out at the most inopportune moment. In a hanger of this design and similar ones, the problem is solved simply: the main bar is for hangers, and fixed hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or shaped metal or plastic pipes, see fig. However, despite all the design tricks, their organic vices do not go anywhere. The same as the orderly hung. But high labor intensity is added: in order to hide the connecting nodes, you have to strain both your arms and your head.

It is better to make a square base of a floor lamp hanger from pipes. With the same withdrawn floor area, the distance between the support points increases by 1.4 times. If the base is still heavier, then the hanger up to 1.7 m high turns into a full-fledged hanger. 60 mm sewer pipes are most suitable.

A short master class in pictures on making the base of a floor hanger from pipes is shown on the next. rice. Pipe sections - 150-300 mm each, depending on how much floor can be given to the hanger. In addition to them, you will need 3 straight tees, 4 right angles and 4 plugs. Connections - on glue for propylene or PVC, depending on the pipe material. Weighting - sand or small gravel.

One of the comments on original design begins with a question like this: “Why couldn’t you just solder?”. Judging by the fact that later in the same comment, 90 angles with a clear claim to professionalism are called bends (plumbing bends are oblique tees), another 2-3 and the same number of exclamation points suggest themselves to the question mark.

Nevertheless, the author of the product, albeit not knowing plumbing terminology, solved the problem in a completely engineering way. The hanger does not need tight joints, and a tube of glue will cost much cheaper than renting a soldering iron for propylene. Which, moreover, you need to learn how to use, spoiling a fraction of the material. For greater reliability, you can reinforce the connections with phosphated (black) self-tapping screws: on black, their heads are not visible, and the strength of the hanger will not decrease.

Note: the pommel in the original design is also made of pipes, but, frankly, its design is not the same ... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

simple frame

A frame hanger made of pipes can be without legs, just leaning against the wall with an inclination. However, its slope must be negative. There must be at least 350 mm between the wall and the clothes on the hangers. If the slope of the frame is positive (the upper crossbar is adjacent to the wall), then the lower one will "leave" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, they will either cling to the lower crossbar with their feet and it will beat the floor, or it will have to be fixed to the floor, and this is really bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen furniture for sale that needs to be screwed to the floor? Is that a special purpose, for example. rack. And then, they also try to get by with fastenings to the walls and, in last resort, ceiling.

A diagram of a frame hanger with a negative slope of pipes is shown in fig. The materials are the same: line segments sewer pipes 60 mm, 90 angles and straight tees. Withdrawn usable floor area - zero. At the bottom there can be a shoe rack or a banquette. For fastening to the wall, in order not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - extensions are attached to the wall with a pair of self-tapping screws in dowels each.

wall

Simple hangers-panels do not require special analysis. How to make a wooden wall hanger, see for example. video.

Video: do-it-yourself wall hanger made of wood

Here we recall, firstly, the sconce hanger. Foldable, it can be very useful if a large company has gathered or the kids have returned from the yard at least squeeze it.

An example of such a structure is shown on the right in Fig. However, its creators were clearly guided by the principle: “Consumption is the basis of turnover Money". The outer (folded) side of the flap bar is inactive and a locking mechanism is needed. And a separate hanger for every day.

Meanwhile, folding wall hangers have been known since ancient Egypt. In the local climate, outerwear was worn occasionally, in bad weather, but after wearing it, it was necessary to dry it. There was no point in keeping a separate hanger for this in the regions where it rains and cold once a year, not every year, so they came up with the one on the right in Fig.

When folded, the compact wall hanger of the Egyptians was fixed with a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is that the hook hooks should be in 3/4 of the circle, then nothing will fall off them even with the bar folded back. And without need, the whole hanger looks like just a stick on the wall; you can hang bags, umbrellas, keys on hooks.

More about hooks

The original wooden hanger can be made without metal at all, not counting the fasteners. Do not rush to throw away the New Year's pine or Christmas tree (only the blanks will need to be turned upside down):

Video: original do-it-yourself wooden hanger

Best of all, such a hanger will look in the country, in a bar or frame house. Depending on the interior design - and in a city apartment. She will go to the bathhouse perfectly: the touch of steamed skin on metal is unpleasant, and to some extent even traumatic.

Hangers in the nursery

Probably, all children scatter wearable things. There is no need to especially scold them for this: without knowing chaos within reasonable limits, you will not accustom yourself to order. Who is against - answer Friday's question to Robinson Crusoe: "Why doesn't God kill the devil?"

However, teaching children to handle things properly is necessary. Only a children's hanger, so as not to cause obvious psychological rejection, should look somewhat disordered. It is also highly desirable that the child associates it with a favorite game or hobby. Examples of wall hangers in the nursery of the "game / hobby" type are given in pos. 1 and 2 fig.

A universal method of this kind is a tree hanger, pos. 3. In the contour of a tree, as in any fractal structure, order and chaos interact and complement each other, creating a harmonious whole. Do not forget to just make the tree stronger, for example. from plywood from 12 mm, and, as it should, with a step of no more than 250-300 mm, attach to the wall with self-tapping screws from 6 mm in propylene dowels. A tree, after all, to climb on it.

Floor hangers in the nursery are undesirable for the same reason: well, they will climb anyway and crash. Therefore, if you already want a floor hanger in the nursery, you need to make one that you can’t fit on, which can be seen in pos. 4 and 5.

About cutting plywood

In any case, parents face problems that small ones don’t care about yet: material consumption and labor intensity. It is no longer easy to draw a complex contour along a grid on a solid sheet of plywood, then it must be accurately cut out, which is even more difficult. And in the end it turns out that 60% or 80% of the material went to waste, no longer suitable for anything. It is necessary, on the contrary, to make a children's tree hanger from waste. Or cut a denser whole sheet.

The method for this has long been known: element-by-element cutting and assembly. If the tree is plywood, for the full strength of the finished product, each part is recruited from 2 layers, leaving resp. folds and grooves, see fig. Fragments of blanks are assembled on PVA glue, wood glue or Express (liquid nails). If the assembly is on PVA, the fragments must be additionally fastened with small nails with a snake in increments of 100-150 mm with an indent from the edges of 30-40 mm.

They assemble a tree hanger on the same adhesives, but now each connection must be fastened with self-tapping wood screws with an envelope. Then the gaps and fastener heads (they must be drowned during assembly) are rubbed with putty from sawdust of the same plywood on PVA. Such a tree, even without painting, only under varnish, will look solid.

Note: just in case, we recall - all wooden details before assembly, any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted with water three to five times. After impregnation, before further work, a technological break is made until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

In the illustrations above, you most likely noticed curved wooden hooks and other hanger details. It is quite possible to make them at home. In production, dense, small-layer, defect-free wood or waterproof birch plywood (BS grade) is bent heated with steaming or dry, but these methods are too complicated for homework. Only bamboo is more or less simply steamed: the workpiece is boiled for half an hour or an hour in rapidly boiling water, after which it is bent by hand. In case of bending according to the template, the workpiece must be fastened to it quickly, before it has cooled down, with a wide cotton braid or a strip of natural tarpaulin.

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the desired thickness, or, twice or four times more in number, from thin sheet material to dial then how much is required in thickness. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a locksmith's through gaskets made of thick plywood and processed with a rasp on wood to size, and then with a clean sandpaper. One rasp is enough, with flat and semicircular working surfaces, see fig.

The workpieces are assembled into parts in the manner described above. The end surfaces, if you need to hide the layered structure of plywood, are sealed with strips of self-adhesive film under the tree. After that, the part is varnished twice or thrice with water-based acrylic varnish; nitrolac can ruin the self-adhesive. It is not worth edging (edging) with a plastic furniture edge: you need to accurately select the groove for the edge anchor, which requires a milling machine, but on curved surfaces of large curvature and short length, the edge still does not hold well. And the details pasted over with self-adhesive, under varnish, from solid wood, even the master cabinetmaker will not immediately distinguish.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is frame, see below, because. On such hangers, it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If the house managed to shield the dressing room, then the floor hanger is the best option. The cost of floor hangers is significantly higher than wall hangers, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

It has already been said enough to make a choice, as long as there is enough floor space. However, let's finally compare how attractive a hanger is in a floor-type hallway:

Clothes hung on hangers dry faster, do not stretch; the collar and lining are not torn.
On a hanger approx. 1.5 m fits a seasonal set of clothes for the whole family, which will save on the closet and the area under it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its area.
With correctly calculated dimensions of the hanger, neither the wall from the clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with the rearrangement of furniture; after moving the hanger, it is not necessary to seal the mounting holes in the wall.

Types of floor hangers

Types of wall hangers

Floor hangers with chest and bench

Clothes and keys

Regarding hangers-panels, the amateur master has an additional opportunity, namely: to provide such a sidewall on the edge farthest from the front door. Perhaps not reaching the bottom, with a bevel or notch. The factory ones do not do this: the hanger should be designed for clothes sticking out from the side. One sidewall almost does not interfere with this, but it is not known how the hanger will stand with the buyer, and it is unprofitable to make right and left hangers.

What gives such an addition? Place for the housekeeper, invisible from the threshold. In the same place, on the side, there may be a dressing table or cabinet, but the main thing is that the master's keys will not catch the eye of a casual visitor, and they are in sight, according to criminologists, a serious factor in spontaneous illegal actions, without which, i.e. temptation, the visit of a not entirely trustworthy subject would have done well both for the owners and for him. You can, of course, make a key holder luxuriously designed and with a secret lock, but this is a lot of work and material costs. And so - a simple plank with hooks will do. Or just hooks screwed to the sidewall outside of the stowage section.

We will assume that a suitable design has already been selected, and let's take a look at how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; more convenient in some cases. Let's start with floor hangers as the most functional.

floor standing

Drawings of a wooden floor hanger

About hooks and trempels

Pipes and profiles

Pipe hangers

Making the base of the hanger from pipes

One of the comments on the original design begins with a question like this: "Why couldn't you just solder?". Judging by the fact that later in the same comment, 90 angles with a clear claim to professionalism are called bends (plumbing bends are oblique tees), another 2-3 and the same number of exclamation points suggest themselves to the question mark.

Note: the pommel in the original design is also made of pipes, but, frankly, its design is not the same ... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

simple frame

Scheme of a simple floor-wall pipe hanger

A diagram of a frame hanger with a negative slope of pipes is shown in fig. The materials are the same: 60 mm straight sewer pipes, 90 angles and straight tees. Withdrawn usable floor area - zero. At the bottom there can be a shoe rack or a banquette. For fastening to the wall, in order not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - extensions are attached to the wall with a pair of self-tapping screws in dowels each.

wall

Simple hangers-panels do not require special analysis. How to make a wooden wall hanger, see for example. video.

Here we recall, firstly, the sconce hanger. Foldable, it can be very useful if a large company has gathered or the kids have returned from the yard at least squeeze it.

An example of such a structure is shown on the right in Fig. However, its creators were clearly guided by the principle: "Consumption is the basis of cash flow." The outer (folded) side of the flap bar is inactive and a locking mechanism is needed. And a separate hanger for every day.

Compact folding wall hanger

More about hooks

Video: original do-it-yourself wooden hanger

Best of all, such a hanger will look in the country, in a timber or frame house. Depending on the interior design - and in a city apartment. She will go to the bathhouse perfectly: the touch of steamed skin on metal is unpleasant, and to some extent even traumatic.

Hangers in the nursery

Baby hangers

About cutting plywood

Assembling parts of a plywood hanger-tree

Note: just in case, we recall that before assembly, all the wooden parts of any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted with water three to five times. After impregnation, before further work, a technological break is made until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

Wood rasp

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the desired thickness, or, twice or four times as many in quantity, from thin sheet material, in order to then gain as much thickness as required. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a locksmith's through gaskets made of thick plywood and processed with a rasp on wood to size, and then with a clean sandpaper. One rasp is enough, with flat and semicircular working surfaces, see fig.

Click Class

Tell VK

A wall hanger in the hallway is an important element of storage. The layouts of many apartments have narrow corridors, in which it is not always possible to place a full-fledged closet, so the owners are looking for alternatives. I want to keep the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.

The most popular materials for making hangers are wood and metal.

Forged metal hangers amaze with their beauty and smoothness of forms. They are used in Provence and Art Deco interiors. This version of the hangers is mounted on self-tapping screws, and more often hung on them.

This option of hangers can be attributed to horizontal. Their function is only to store outerwear. Metal hangers often have an aged look, which gives them a picturesque look.

A very interesting option is the combination of forged elements and leatherette or fabric. Looks unusual and luxurious. Such a hanger will decorate any corridor and become its highlight.

The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and originality of products is preserved. In the first version, the wood gives an array and solidity to the furniture, and in the second, metal facilitates the composition and gives grace.

Hangers made of wood can be combined with a mirror, a shelf for shoes or for head appliances. The photo shows a very compact version of the hallway.

The hanger can have sections: for short and long top things, which helps prevent dirt on the wall.

A wooden hanger is completed with a shelf and a mirror, also a great option for small hallways.

When choosing a material, it is necessary to focus on its strength, whether it will withstand ready product heavy winter things.

For this function, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.

Materials can complement each other, carrying their functions. Metal, as more durable, goes to the basis of the structure, and wood as decorative elements.

Ideas for hangers in the hallway from improvised materials

I picked up a lot of ideas when the hanger was made with soul from improvised materials. This can serve as inspiration for many families. I think that in the interior it is necessary to move away from stereotypes, because any design is unique with its non-standard solutions.

In the photo, a completely ordinary hanger from a piece of board is made in nautical style. The matching backdrop and anchor hooks add color to the entire hallway.

An interesting forged lightweight option, perhaps not entirely from improvised materials, but it has a place to be. A very functional and elegant option, it contains a stand for shoes and hats.

Connected in the form of rhombuses, slats with wooden hooks, it looks very eco-friendly and stylish. Placing the hooks at different heights allows you to hang a lot of things without creating an untidy pile.

Curved leaves made of thin aluminum decorate the walls in a peculiar way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite malleable.

Pallet hanger - the most affordable and modern version hallway decor. Creates a loft atmosphere and is suitable for non-standard young people.

And, most importantly, it is completely environmentally friendly and strong material. With the help of corners and self-tapping screws, you can build both a shoe rack and a shelf. You can simply cover the pallets with varnish or stain, then a beautiful wood pattern will remain, or you can paint over with thick colored paint to match the overall tone of the interior.

For minimalistic designs, the hanger in the photo is just a godsend. Comfortable, without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers out of the hanger.

I will give a small master class on making hangers from wooden coat hangers. It turns out two rows of hooks. The option is unusual, but very functional.

Having slats of different widths, you can create the simplest option furniture by simply drilling hooks and adding crossbars for fastening.

For nature lovers, you can use images of animals and birds, and an artificially aged wooden product will add history to the corridor.

An interesting combination of two materials: wood and metal. Modern compact hanger with built-in hooks.

Many times I have come across the ideas of cutlery hooks: forks and spoons, as in the bottom photo.

An interesting option for a plastic hanger for a small family. In the summer, it can only serve as a decoration.

DIY wooden wall hanger

To make a hanger, you need to take a few boards, either ready-made or bought in a store. You can use any wood: pine, oak, birch.

We will analyze two options for hangers.

We cut out the same sidewalls, the top and the middle crossbar, to which you then need to attach the hooks.

We cut out beautiful bends on the sides and skin all the details.

We connect in finished structure self-tapping screws, furniture corners.

We mark places for hooks and drill them.

We check the finished product for strength and varnish it.

You can make an even simpler version of the clothes hanger.

The photo shows the diagram and dimensions of the future product.

We take purchased boards or lamellas, in this case pine wood was used.

We measure the same distance between the vertical parts and fasten the frame from the wrong side. We drill any fasteners. The shelf will be hung on self-tapping screws.

On the front side we fasten the hooks at the same distance from each other. And we admire the result.

This hanger model can be supplemented with a shelf, to give contrasting colors. The photo shows an option when the crossbars do not go from the wrong side, but from the front.

Tell VK