The difference between laminate and parquet. What is the difference between laminate grades? Choosing the best

When it comes to replacing flooring, many people compare traditional flooring to modern materials. Most often, the choice arises between, and laminated parquet, every owner who plans to do major repairs should know what the difference is between them.

Advantages and disadvantages of natural parquet

Now this material is produced from domestic wood species and exotic wood (wenge, merbau, bamboo). Usually taken dried for several months edged board, which is cut into blanks, removing natural defects in the form of knots, curved places and cracks. Then grooves with ridges are created, the material is ground and finished.

With proper care, high-quality parquet has served well for many decades with periodic cosmetic repairs. It is silent, warm, has an original natural pattern, not static, looks very good in the interior. The tree lends itself to restoration, grinding and re-lacquering.

To fully assess the question, what is the difference between parquet and laminate, you need to know the disadvantages of the coating. For example, parquet is scratched by shoes or sharp objects, it is afraid of spilled water, and its installation is rather complicated. With strong jumps in temperature or humidity, the coating may be deformed. Varnish is capable of releasing unpleasant substances, so some people prefer to take an unfinished board and periodically rub it with wax or natural oils.

Advantages and disadvantages of laminate

This material consists of a real complex "pie" - a stabilizing layer (special paper or plastic), a carrier layer (fibreboard, chipboard), a decorative and protective coating. High-quality laminate does not fade from ultraviolet radiation, its service life is less - up to 20 years. Note that the laminate is much less likely to suffer from climate change, sharp furniture legs and heels. You have the opportunity to buy artificial floors of very different colors that imitate any type of wood and even stone. Laminate is well suited for those who plan to equip the house with underfloor heating. The disadvantages include the static nature of this coating, it requires processing with special compounds. In addition, such a floor is colder and noisier, it is practically impossible to restore.

To summarize our review, what is the difference between laminate and parquet. If wear resistance, ease of maintenance and resistance to temperature fluctuations are important to you, then it is better to take a laminate. But for those who appreciate appearance and durability, it is worth buying a parquet that has been proven for centuries.

What will be the flooring - one of the first questions that we have to solve when repairing any room. Many people want the floor in the kitchen to be wooden, so it is important for them to know what is best - parquet board or laminate. Each material has its advantages and disadvantages.

The parquet board looks impressive and solid, adding a discreet nobility to the atmosphere.

Parquet board - prestige, quality, reliability

Many people think that laminate is more suitable for offices. People who prefer quality things and can afford to buy expensive flooring choose parquet. For the price, it is much more expensive than any laminate.

Many people confuse the concepts of parquet and parquet board. The parquet board consists of three layers. The bottom layer is softwood veneer (layer thickness is about 2 mm), the second is wooden planks, which are laid perpendicular to the top and bottom layers. Also here are the extreme lock lamellae. It is due to them that parquet is laid so quickly. The top layer of the parquet board is precious wood (oak, ash, birch, beech). Piece parquet is made from the same wood. The attractiveness and durability of the parquet board depends on the top layer. It is impregnated with special solutions that help preserve the beauty of the parquet board for several (or even many) years.

The attractive pattern of natural wood enhances the decorative possibilities of the parquet board.

People appreciate wood for its naturalness and warmth. It warms even the interior in a minimalist style. Peculiarities of wood species, unlimited possibilities for laying parquet boards, new technologies for the production of this material significantly expand the artistic possibilities of parquet. The wood floor is cozy and warm. But when varnished in several layers, natural comfort disappears. To preserve this most valuable property of a parquet board, it is recommended to use wax or oil instead of varnish as a coating. They do not hide the beauty of the tree, leaving the texture natural. The oil coating is renewed every few years.

The parquet board has a complex structure that improves specifications this type of flooring

Parquet board design can be single-strip, two-strip and three-strip. A single-strip parquet board has a top layer of a solid plank of wood, so you can see the grain of the wood. In two- and three-strip parquet boards, the top layer consists of two or three rows of lamellas, which can be of different lengths, so the pattern looks unusual. Such a parquet board does not differ externally from parquet laid with a deck pattern. There are also models that imitate piece parquet laid with a “wicker” or “herringbone” pattern. As for the pattern of the top layer of the parquet board, it depends on the cut, and can vary from uniform striped to motley with veins and knots. A wide variety of wood types and options for its processing allows you to choose a parquet board of any color.

A parquet board, like a laminate, is a material ready for installation. The parquet board is polished, covered with varnishes and protective agents. Laying both laminate and parquet boards is quite simple, and the floor can be disassembled and reassembled if necessary.

Laminate - easy care, durability, attractive price

Laminate is one of the most popular floor coverings. Relatively recently, he replaced the parquet board and made her worthy competition. Over the past few years, laminate production technology has developed so much that the coating can compete with many other varieties. Unlike parquet, laminate does not require sanding, impregnation and varnishing, it does not change color under the influence of sunlight, floors can be washed using chemicals for washing laminate. As you can see, the coating gives the hostess little worries.

Laminate has its advantages and disadvantages, first of all, a wide variety of textures and shades.

The laminate is not afraid of the sun's rays, frequent washing and mechanical damage to the surface. Stains can be removed with acetone or any product with a high alcohol content, and if you clean the room daily, you can get by with a regular damp cloth or vacuum cleaner. Scratches, if they are minor, can be masked with a repair pencil or putty. There is one thing that a laminate floor is afraid of - excess moisture, although there is also a moisture-resistant laminate. If you properly care for the coating, it will last a long time and remain smooth and beautiful, as on the first day after installation.

As already mentioned, laying laminate is quite simple. It all depends on its lock (fastening), the condition of the floor in the room. The fastest way to install laminate flooring is with a “clicky” glueless lock, as no glue or special tools are required for installation.

What is the difference between laminate and parquet

Laminate and parquet are the most popular floor coverings. Both guarantee a reliable and durable floor at an affordable price. Sometimes laminate and parquet boards are so similar in appearance that it can be difficult for a person who is not related to construction to distinguish between them. What is the difference between laminate and parquet board?

  • Mode of production

The parquet board consists of three layers of veneer, while the lower layers are cheaper raw materials, and the top layer is quality materials. Laminate, on the other hand, can be compared to photo wallpaper, which is pasted on a multilayer fibreboard.

  • Exterior flooring

As for the appearance, the laminate is most often decorated exactly under the parquet board. But the drawing on each board is identical, which cannot be said about the parquet board. You will not find two identical boards here, since the pattern is identical to the wood structure. In addition, there is a laminate with a “marbled” or “tile-like” pattern on sale.

The parquet board, like the laminate, is made so that its installation does not cause any difficulties.

Laminate is considered more practical material. It is resistant to abrasion, it is quite difficult to damage it with shoes or furniture. The parquet board demands the careful relation to itself. The enemies of this flooring are heavy furniture, heels, changes in humidity and temperature, so think carefully about whether to lay a parquet board in the kitchen. When comparing laminate flooring with parquet, laminate may seem like a colder material than parquet, which is used to make natural wood. It is also believed that the laminate is noisier (let noise through, footsteps are clearly audible). But these shortcomings can be avoided by using modern facilities for sound insulation - special substrates for laminate or parquet. The substrates are made of 2 mm thick polyethylene and natural cork. Cork backing is more expensive because cork is natural material which is considered more environmentally friendly. The substrate is not nailed to the floor, but simply placed on it before work begins.

  • Features of care

If you decide to make a parquet floor in the kitchen, immediately purchase special means to take care of him. The mop with which you clean the floors should be only slightly damp, and the “steam” function should not be used in the vacuum cleaner. Laminate is also sensitive to moisture, but to a much lesser extent than parquet. household chemicals not recommended for floor cleaning.

  • Service life of laminate and parquet boards

From the outside, parquet boards seem fragile, but with proper care, they can last up to 30 years. You can extend the life of a parquet board through restoration and grinding, but these procedures can be done about 4 times over the entire period. Laminate lasts from 7 to 20 years. Coating with high class wear lasts longer. Extends the life of the laminate and proper care behind him.

  • flooring price

The simpler structure of the laminate affects its price, but not the quality.

A high-quality laminate is not much inferior in price to a parquet board, therefore, when deciding whether to purchase a particular floor covering, be guided by its properties and take into account the characteristics of the room for which this flooring is intended.

Determining the choice of flooring

It turns out that the parquet board is more durable. The surface can be updated. Medium laminate price category serve no more than 8 years. Craftsmen have come up with ways to restore the laminate, but the method is quite expensive. It is easier to buy a new coating, at the same time changing the colors.

What some consider to be a disadvantage of laminate, others recognize its dignity. The material, of course, in comparison with the parquet board, is short-lived, but there is also positive moment: It's not a pity to part with him. Abroad, where people often change apartments and offices, this material is very popular. Laminate is not afraid of women's hairpins, rollers on which your children may want to ride around the house, metal car models. Laminate can be laid even where you most likely would not dare to lay a parquet board (in the kitchen, for example).

A few words about laying parquet and laminate flooring

Laying a laminate, like a parquet board, should be carried out according to the principle “if you don’t know how, don’t take it”. In any case, the coating brought from the store must be brought into the room and left for at least two days so that the material “settles”, gets used to the humidity and air temperature in this room.

For laying laminate and parquet boards, it is better to invite professional flooring masters, and not craftsmen who lay quickly, crookedly, inexpensively. In terms of laying, laminate is a rather capricious material, and there is only one chance to lay it correctly. It is not glued to the floor, but laid in a "floating way" - the boards are connected to each other using the "thorn-groove" method. Therefore, the laminate is removed very easily. One thing is bad - it is removed once and for all. If you have removed the laminate, you will no longer be able to put it in another room.

Manufacturers have made sure that the laying of flooring is simple and not particularly laborious.

If you've hired laminate floorers, make sure they don't stick the boards to the floor, especially with PVA glue. Laminate will swell first, then shrink. If you really need to use glue, let it be a special glue that is produced specifically for laminate. Also, make sure that the craftsmen do not lay the boards parallel to the window. The light from the window should fall parallel to the boards, otherwise the joints will be noticeable.

If the floor is uneven, it must be leveled before the flooring can be started.

Let's summarize:

  • The parquet board demands special conditions on leaving. Laminate is not afraid of temperature changes and mechanical stress.
  • For the manufacture of parquet boards, natural wood is used, and for the laminate, synthetic materials are used.
  • The design of the laminate is much more diverse.
  • The floor on which the parquet board is laid is beautiful, warm, quiet.
  • The parquet board lasts much longer.
  • Laminate is usually cheaper than hardwood flooring.

When a serious renovation is started in an apartment, the owner inevitably faces the question of choosing a floor covering, and most often this question is which is better, parquet or laminate? The tree is the oldest building material, people have long appreciated its practicality, and over the past century they have begun to pay more and more attention to the environmental friendliness of wood. But before solving the dilemma, parquet or laminate - what to choose, of course, you need to understand the difference between their properties, compare the advantages and disadvantages.

  • Variety of types of wood flooring
  • Design differences
  • Price
  • Advantages and disadvantages of parquet and laminate
  • Installation
  • Appearance
  • Exploitation

Variety of types of wood flooring

Mankind has come up with quite a few floor coverings, in the names of which there are the words "parquet" or "laminate":

  • laminated parquet;
  • parquet board;
  • laminate flooring, etc.

So that an ignorant buyer does not get confused in this variety, we will describe the main ones.

“Laminated floor”, “laminated parquet” and just “laminate” are one and the same.

And the variety in the names is explained by the constant improvement of the manufacturing technology of this coating, quality characteristics which is constantly growing, and it looks more and more like natural parquet. That is, laminated parquet is the same laminate, but more reminiscent of natural dice.

As for parquet and parquet board, these are completely different things:

  • Classic parquet consists exclusively of hardwoods. There are many types of parquet.
  • The parquet board appeared much later and is a material of glued wooden planks in several layers. At the beginning of its origin, the parquet board was made from parquet production waste.

Design differences

Comparison of laminate and parquet should start with a general one - both of these finishing materials are made of wood, and the parquet consists of it entirely.

This is where the main difference between parquet and laminate lies, since in the manufacture of the latter, other materials are used along with wood.

Moreover, if European manufacturers have a laminate of 90-95% wood, then in Chinese products it may not be more than half.

Laminate flooring is like a layered cake: the main layer is made of wood fiber, which resembles plywood or fiberboard in structure, and the other layers are artificial materials - paper and resins. Front side The laminate is made of very durable and wear-resistant plastic, with which the product is laminated, hence its name. Under the layer of this transparent plastic there is also a film that has a pattern that imitates the texture of trees - it is this film that determines the appearance of the laminate. The same technology is applied to the manufacture of low pressure laminate.

Video about the difference in manufacturing and performance characteristics of parquet and laminate:

Price

Listing the characteristics that demonstrate the difference between parquet and laminate, one cannot fail to note the price, which is several times higher for parquet than for any laminate.

The difference is significantly affected by both the type of wood and the quality of the laminate. The most expensive brands of laminate are not much cheaper than parquet. But if the buyer already has enough money for an expensive laminate, then it is better to add a little more and buy parquet, which will have a number of advantages.

If the financial issue does not matter at all, then you definitely need to stop at a massive parquet board, and even better - on piece parquet.

Advantages and disadvantages of parquet and laminate

For the consumer, of course, there is no more important question than which of the materials will show itself better in operation.

Advantages of parquet

  • parquet can be restored many times;
  • good thermal insulation makes the parquet floor warm;
  • good sound insulation;
  • durability (with quality styling, material and adequate operating conditions, the service life of parquet will be tens of years);
  • hypoallergenicity;
  • dust is not attracted to wood.

Cons of parquet

  • dents and scratches easily appear on the parquet;
  • caring for parquet is troublesome and expensive - once every few years it needs to be sanded and varnished, besides, this requires a special grinding tool and professional skills;
  • the procedure for restoring parquet is very long (almost like a full-fledged repair) and is associated with the transfer of all furniture.
  • very sensitive to fluctuations in humidity and temperature, which causes it to dry out, crack or swell;
    high price.

Advantages of laminate

  • the operation of the laminate is not associated with too troublesome maintenance;
  • with an average intensity of operation, the laminate can last for quite a long time - a couple of decades;
  • the cost is cheaper than parquet.

Cons of laminate

  • laminate is less durable than parquet;
  • it cannot be restored.

A common limitation for both parquet and laminate is that both of these coatings cannot be used in rooms with regular high humidity (bathrooms, kitchens), the same must be taken into account when washing parquet and laminate.

You should know that both coatings fully allow even daily wet cleaning, but the rag must be carefully wrung out, preventing excess water from getting on the surface.

Video about the differences between parquet and laminate:

Installation

As for the laying of these coatings, in the case of a laminate, it looks much simpler. Inviting specialists for its installation will cost a much smaller amount than laying piece parquet.

A modern laminate is laid a little more complicated than a children's designer, and no expensive and specific tools are required.

On the laths of the laminate, special locks are made, with the help of which they easily, evenly and reliably interlock, and the final coating looks monolithic.

The advantage of laminate flooring in installation time is also obvious, because the area of ​​\u200b\u200ba medium-sized room can be covered with it in one to two hours. If you lay piece parquet in the same room, then the matter will stretch for a day, or even two.

In this sense, the use of a parquet board can become a Solomon solution. The technology of its laying is closer to the installation of a laminate than piece parquet, which strongly resembles the assembly of a mosaic.

Appearance

There is no doubt that well-groomed natural parquet will look much more refined and luxurious than laminate. Although with the development of technology, not every consumer can distinguish a modern laminate from a parquet floor. After all, it is not for nothing that manufacturers have spent a lot of effort to model a wood pattern on a laminated board, which has already become almost indistinguishable from natural, so in many cases replacing parquet with laminate can go unnoticed.

Traditional parquet is strongly associated in the imagination with strict classical interiors of living quarters or ceremonial halls. Laminate can be perfectly entered both in classic interior, as well as in modern. This is facilitated by a huge variety of textures and shades that manufacturers have learned to give to laminate flooring.

Laminate can imitate not only the wood itself, but also tiles, marble, granite and a whole range of artificial and natural materials.

Exploitation

When comparing the behavior of parquet and laminate, it quickly becomes clear that the latter is colder and especially noisy, although the latter disadvantage can be quite successfully dealt with with the help of sound-absorbing substrates. And if you connect it to the underfloor heating system, then this disadvantage will turn into a virtue - the heat will easily enter the room.

But the purchased high-quality laminate is not afraid of scratches from sharp ladies' heels or moving furniture, it will not fade in the sun and will not retain traces of indentation or static loads. Modern laminate is difficult to ignite and quite moisture resistant.

Comparing the care of laminate and parquet, it should be borne in mind that the appearance of the latter is difficult to maintain if the owners like to rearrange furniture often, are used to walking around the house in heels or have pets.

Wood is sensitive to indelicate external influences, and in the absence of careful handling, its surface is noticeably damaged.

Therefore, it is required to scrape natural parquet every few years in order to remove a thin damaged layer from it.

If the microclimate in the room changes, then the parquet begins to dry out and deform, which causes an unpleasant creak. Soft and hygroscopic wood does not like sudden changes in temperature. Lacquered parquet may lose its environmental appeal, as toxic components can be released from the varnish.

Neither parquet nor laminate can outperform each other in every characteristic, each has its own strengths and weaknesses. Therefore, the choice between these two floor coverings should be based on the financial capabilities of the buyer, the operating conditions and the willingness of the owner to regularly monitor the appearance of the flooring.

And what would you choose - parquet or laminate, and why? Share your thoughts in the comments and explain them - other readers will be interested!

Repair work with a certain regularity is done both in apartments and in private houses. And if the walls are changed about once every five years, then it can last much longer. Therefore, it is so important to pay special attention to the choice of material for the floor. Today, parquet and laminate are among the most popular floor coverings. Let's find out how laminate flooring differs from parquet boards.

Laminate and parquet - what's the difference?

Laminate and parquet boards have a common similarity - their multi-layered structure. The laminate consists of four, and sometimes five layers of material. Simply put, this coating is a photo wallpaper that is attached to a sheet of fiberboard and covered with a transparent resin on top. The parquet board has a three-layer structure. The bottom two layers are made from cheap pine or spruce, while the top layer is high quality wood veneer.

The drawing on all lamellas of the wood-like laminate is almost identical, which cannot be said about the parquet board: it is impossible to find two identical boards that are similar in design.

Another difference between a parquet board and a laminate is that the wooden floor is easy to scratch, and the legs of heavy furniture can leave noticeable marks on it. Laminate is more durable and resistant to abrasion. However, laminate flooring is cold, noisy and static. To get rid of such shortcomings, this material is used with a warm floor, underlay and a special antistatic agent.

Both of these floor material do not like excessive moisture on the floor. But when caring for parquet, you can and should use special tools for wooden surfaces what not to do on a laminate floor.

Compared to laminate flooring, parquet board flooring will last much longer and this is explained by the fact that parquet flooring can be sanded several times as it wears out, thereby restoring its original appearance. Laminate is not subject to such an update.

You have become familiar with the similarities and differences between the two floor coverings, so it's up to you whether to choose - a parquet board or a laminate.

The decors of most floor coverings have the pattern, shade and structure of natural wood. This does not mean that they are all wood products. In order to understand the variety of finishing materials, we will find out what is the difference between laminate and parquet boards and parquet, and also compare their properties.

Laminate flooring belongs to the category of multilayer flooring. Composed of 4 base coats (from top to bottom):

Overlay

Protective transparent film formed from high-strength polymer resins. wear resistance finishing material largely depends on the thickness and hardness of this layer.

Overlay is not only a protector that prevents premature abrasion and damage to the coating. Special processing techniques have been developed with the help of which various decorative effects are obtained:

  • mirror gloss,
  • silky matte satin
  • semi-gloss or semi-gloss structural embossing,
  • smooth matte surface, etc.

Depending on the strength of this layer, the laminate is assigned a load class - from 31 to 34.

decorative layer

Formed from thick paper. The pattern chosen by the designer is applied to it by high-precision printing. The most common decors are for floorboards or classic deck parquet. Stone, textile and avant-garde designs are used less frequently.

Carrier board HDF

The basic element of the laminate. It is a rigid sheet of high-pressure compressed chips and thermosetting synthetic resin. The degree of resistance of the coating to continuous loads depends on:

  • Plate density. Varies from 750 to 1200 kg/m3;
  • The thickness of the lamella is from 6 to 14 mm.

stabilization layer

Represents the paper impregnated with melamine pitches. Designed to protect the bottom of the laminate from moisture and prevent deformation of the plates.

Some specialists also single out the locking part in a separate layer, with the help of which the lamellas are connected in a glueless way into a single canvas, without gaps and drops. Almost all manufacturers produce laminate flooring with a click system. Due to this, the installation is carried out by a "floating" method.

To improve the moisture-resistant characteristics, the ends of the laminated coating (in some collections) are treated with special waterproofing compounds based on polymers or wax.

Thus, a laminate is a composite hard coating consisting of dissimilar components.

Features of the parquet board

What is the difference between a parquet board and a laminate? There are some similarities between laminate and parquet board. Both materials are multi-layered, but the second coating (decorative) is made from 98% wood. Structurally consists of:

  1. Wear-resistant and stain-resistant top coat. Polyurethane, alkyd or acrylic varnish (glossy and matt), wax, a mixture of oils or oil-wax compositions are used.
  2. Solid wood: oak, ash, jatoba and others. To give interesting tones, special processing techniques are used (toning, bleaching, smoking, brushing, etc.). The cut is quite thin - 2-6 mm, but re-grinding or scraping 1-4 times is allowed.
  3. carrier base section 6-9 mm. For its manufacture, spliced ​​softwood of technical grades is used. The fibers are arranged transversely to the top layer in order to exclude possible deformations (skews, twisting, arching).
  4. bottom stabilizing layer. Its thickness does not exceed 1-3 mm. The layer is designed to compensate for the stress of the layers and ensure the stability of the geometric dimensions of the strips.

The parquet board is laid in a “floating” way, so each plank is equipped with a mechanical Click or Lock format locking system. However, there is a difference here: unlike a laminated floor, a prefabricated array can be fixed to the base with glue or fasteners.

Array Characteristics

What is the difference between laminate and parquet? First of all, the fact that these are single-layer, planed from solid wood, planks. For their production, such species as oak, beech, ash, cherry, maple and many others are used. The edges, as a rule, are tongue-and-groove, connected according to the “groove-comb” principle. There are many laying technologies, most often the adhesive method is used. Less often - with the help of hardware, clamps or special fastening cords.

Since the flooring is made from solid wood, its quality and performance characteristics depend on many factors:

  • Dimensions. The length of products varies from 15 to 90 cm, width - 3-12 cm, thickness - 15-25 mm. Small-format strips are considered the most resistant to temperature and humidity changes.
  • Humidity. A more durable coating than parquet from wood has not yet been invented. And the key to such reliability is proper drying. The optimal indicator is from 4 to 10%.
  • Sort. The decorative effect depends on this indicator. The best and most beautiful parquet is made from wood of the "extra" and "highest" categories. The product is obtained with straight or wavy lines on the edges, an almost uniform textured surface, no defects and sapwood. Grades AB, B and C are distinguished by a more interesting pattern with many halftones, as well as the presence of knots, weak and fragile areas.

Do not confuse parquet with solid board. The difference is primarily in size. Parquet planks are even visually small, while solid wood is lamellas up to 2 m long and up to 20 cm wide.

We note one more important feature. Parquet requires additional processing after laying and protective surface finishing. Grinding is carried out, as well as varnishing, which excludes contact of the coating with water, dirt and other negative factors. At the request of the customer, the master can cover the floor with special oil or wax.

Similarities and differences: laminate and parquet, parquet board

It follows from the foregoing that all three considered coatings differ significantly. For clarity, we summarize all the characteristics in a single table.

Characteristic Parquet parquet board Laminate
Appearance Characteristic color and texture of living wood, surface warm to the touch. A presentable appearance of a natural array with a rather monotonous texture. Pleasant in tactile terms, warm. Excellent imitation of wood and stone textures, a wide selection of designs for parquet, board, stone, etc.
Wear resistance and service life Depends on the type of top coat. The floor under a layer of durable varnish lasts at least 50 years with intensive use The service life of the finishing material with varnish protection is up to 30 years. Board under oil or wax - no more than 10 years. The warranty period for class 31 is 10 years, for class 32 - up to 20 years, for class 33-34 - 25-40 years.
Advantages 1) Low coefficient of sound, noise and thermal conductivity;

2) Maintainability;

3) Moisture resistance;

4) Restoration up to 12 times;

5) Over time, the color becomes nobler, acquiring honey shades;

6) Factory defects are corrected by grinding.

1) Easy stacking and disassembly;

2) Moisture resistance;

3) Maintainability;

4) Restoration up to 4 times;

5) Gradually the hue changes towards saturation.

6) Some collections are allowed to be used in commercial premises

1) Quick installation and easy dismantling;

2) Moisture, and for some collections and water resistance;

3) Partial maintainability;

4) Used in rooms with increased loads.

Flaws 1) Complicated and expensive installation;

2) The need for varnishing or treatment with protective agents;

3) Contact with water is undesirable.

1) Protective wax or oil coating needs to be renewed every 3-5 years;

2) afraid of water;

3) It is undesirable to use defective boards;

4) Installation waste may reach 5% of the total.

1) Cold to the touch surface;

2) May occasionally accumulate static electricity;

3) Requires protection from furniture legs, rollers and abrasives;

4) A large amount of waste during installation;

5) Weak noise and heat insulation properties;

6) Fades over time.

Interaction with the system "warm floors" Operation is allowed only with water heating systems Combination with water, infrared and special systems such as Devicel Dry etc. is possible. Standard electrical heating not allowed
Care Lacquered coatings are easy to clean and maintain. With a floor covered with oil or wax, you need to be careful, it is advisable to purchase a series of care products. It requires constant care and special chemicals based on waxes and polymer compositions. Easy to clean and maintain. To remove stains and scratches, it is better to purchase a restoration kit in advance.
Cost, from 350 rubles / m 2 1400 rub./m 2 300 rubles / m 2

Let's summarize:


Which is better to choose: parquet, laminate or parquet board? The answer lies on the surface: focus on your design preferences and financial capabilities. Most importantly, choose a really high-quality product from well-known manufacturers.

Advice! If you need repairmen, there is a very convenient service for their selection. Just send in the form below detailed description work that needs to be done and you will receive offers with prices from construction teams and firms. You can see reviews of each of them and photos with examples of work. It's FREE and there's no obligation.