DIY hanging flower stands. Metal flower stands

What tricks do not go to lovers of indoor flowers in order to conveniently and beautifully place their favorites: whimsical violets, monster or. To avoid inconvenience in the location, today we will figure out how to make do-it-yourself flower stands from waste materials in a matter of hours.

simple flower coasters

It may be hard to believe, but indoor flower stands can be made without spending on expensive materials. To your attention the lightest and budget options for designs.

Woodpile stand

The original coasters are made from simple bushings from paper towels. Alternate them, smearing with PVA glue, and fold the “woodpile”. Paint it with acrylic or oil paint. If desired, decorate the design with colored yarn, which seems to entangle the “logs”.

Flower model for installation on the window

A flower stand on a windowsill should be not only comfortable, but also light. You can cut identical pieces of plywood of any configuration to your liking, make holes with a drill, string them on a pipe, and strengthen them with special fasteners at the right distance. After that, put everything on the window, and decorate with beautiful flowers in author's flower pots. About that, we wrote earlier.

Stylish forging

Forged jewelry always looks appropriate and sophisticated. They can decorate both interior decoration and emphasize features. landscape design. The only problem is that not everyone can make such strong and durable coasters on their own.

Floor stands for flowers from a tree trunk

Eco-style lovers will be interested in wood options that would look as natural as possible and fit perfectly into the interior or landscape design. For example, a floor wooden stand made of a felled solid trunk will look beautiful. For this:

Cut off excess branches with a grinder to make a cylinder about 1-1.5 m long.
Step back from the ends by 20-25 cm, and make deep cuts to the middle of the diameter.
Hollow out the area between the cuts to make a place where small houseplants will subsequently be installed.

After the work is completed, when looking at the structure, a feeling of a flowering log will be created, which looks more than impressive.

Wooden candlestick

This is another option from a tree trunk, but in this case, the part of the trunk where the branching occurs is taken.

The bottom is cut in such a way that a comfortable and stable platform is obtained.
In addition, from the thickest part of the log, disks about 3-4 cm thick are cut out according to the number of branches.
Each cut is fixed with a self-tapping screw on its branch parallel to the floor.
After that, the design can be painted, and if you are an adherent of eco-style, then leave the stump in its original form.
As a result, you will get a floor stand for flowers resembling a large candlestick.

Chair flower stand

Great idea to inspire old chair new life. In order to make such original design, and install large flowers on it, you must:

remove the upholstery from the seat;
according to its shape, cut a blank from plywood;
make small sides by gluing wooden planks along the contour 4-6 cm wide;
reinforce this box in place of the seat.

In such a niche, you can either pour earth and plant flowers, or put ready-made pots with plants. Keep in mind that the more vintage and older the chair is, the more interesting the impromptu bookcase will come out.

Interesting! In the seat, cut a hole that is 3-4 cm smaller than the top edge of the flower pot. Insert the pot into the hole, and, if necessary, strengthen it with polyurethane foam. If you do not need a high stand, then from baby chair or a stool will come out with an equally interesting low design.

Creative model of a two- or three-wheeled bicycle

A flower stand in the form of a bicycle will become a real decoration of your garden. For this:

Flowers on a bicycle are installed in the front basket or rear trunk.
Attach the box to the front and rear fenders with wire or clamps.
You will need white or any colored paint for metal. Paint the entire structure, and install flower pots in the boxes.

Such a bicycle is either attached to dug-in pipes, or placed and screwed to a stump.

Coasters from plastic bottles

Stylish products can be made from the garbage that people throw into landfills every day. As you can see in the photo, outdoor coasters that are not afraid of rain and snow can be obtained from simple plastic bottles. You will need the following materials:

Scotch;
PVA glue;
a skein of thin twisted lace;
toilet paper roll;
1 pack of paper napkins;
13 plastic milk bottles;
lentils or beads, beads;
thick cardboard;
gilded paint.

Action algorithm:

Tie 12 bottles in pairs with tape to make 6 pairs.
With the same adhesive tape, form the lower part of the product from 3 pairs of bottles with a “flower”, and strengthen one of the 2 remaining unpaired bottles in the middle so that its neck rises 4-5 cm above the others.
Knit another similar part, but without the bottle in the middle. This part will be the top.
"Put" the top on the bottom with the necks so that the protruding central bottle plays the role of a rod.
Wind device toilet paper smearing it with glue.
Lay 2-3 more tissue layers, smearing each with glue, and allowing to dry.
Leave the workpiece to dry at room temperature for a day.
Apply the ornament you like to the surface, for example, a floral one.
Cut out leaves from cardboard and glue them to the surface of the stand.
Lay out the flowers from beads and beads, and the stems and cuttings of the floral decor can be imitated with a cord.
paint finished structure gold plated and let it dry.

Wall mount models

Wall stands can be very diverse. Such structures are made of metal, tires, twigs, glass, etc.

From a tire. Remove the car tire from the rim, hang it perpendicular to the floor, and insert miniature pots of climbing greens.

Metal products on the wall are made from pipe scraps with a diameter of at least 10-15 cm. Cut them into 4-5 pieces of the same length. Stepping back from the edge of 3-4 cm, cut out the upper part so that a semblance of a trough comes out, in which flowers are already placed, and even seeds are planted. In order to hang the structure, take a metal rail equal to the length of the “trough” tubes, tie 2 ropes to it 2 cm from the edges so that 2 tips still hang from both sides. Make 2 holes on the pipes, stepping back the same distance from the cuts. Thread the ropes and fix the pendants so that they do not move. Instead of metal, you can take sewer pipe(photo on the right).

Hanging options made of wood. Take a board, cut 3 squares out of it, equal in size. In the center of each, cut out a circle that will be 4 cm smaller than the diameter of the pot in the upper part (if the pot is a cone), and drill one hole for the rope in the corners. Take 4 identical pieces of rope, each of which will be for a separate corner of the stand. Tie a knot on the first rope, stepping back from the edge of 10-15 cm. Pass it from below into the hole of the lower “floor”. Tie another knot at a distance equal to approximately the height of the pot, multiplied by 2. Again, thread the rope from below into the hole from the next "floor", and repeat the manipulation with each level. Repeat the same with all ropes. Collect all 4 tips at the top into a knot, thread it into a hook, and hang it.

Important! You should not get carried away with the floors, because the design will come out quite heavy.

There are a lot of options for flower stands, but do you have original ideas? Share with readers in the comments.

Video: Do-it-yourself flower stand from an old stump

Only the stands in which they are installed can spoil the beauty of flowers. To create beautiful interior or arrange a site country house, you should carefully look at the various metal products. Such metal flower stands perform not only the function of maintaining the pots at a certain level, they are an element of the interior.

Types of structures by location

Floor, table or wall products are often used. They may have various sizes and shapes, so the owner of each house will be able to pick up more suitable option. When choosing such products, it is worth deciding which ones will be more convenient to place in the house or on the street:

Wall-mounted metal flower stands for indoor use. Such products are small in size, so they are suitable for every home. They can be placed even in narrow aisles without cluttering up the space. Often it is with such products that empty spaces on the walls are filled. Forged supports for flowers look quite attractive, which look more elegant.
Desktop e. To install them, you need to purchase additional furniture. It includes shelves, cabinets and tables. Such products should be placed only in spacious rooms. If you neglect this rule, the room will look more like a flower garden than a living room.
Floor. Such coasters look more solid than the other named types. They are independent interior elements that do not require the location of additional items. Their feature is big size which needs to be considered before buying.
Outdoor metal flower stands. Such designs are selected based on the style in which the design of the site is made.

Construction types

When buying a metal flower stand, you need to take into account their shape and size, otherwise, after installation, you may be disappointed in your choice and take up a lot of usable space. Depending on the number of flowerpots placed, the structures can be divided into:

single structures;
double;
multiple.

Also, flowers can be located on one or more levels. The choice of a particular option depends on the items that are in the room. An example is a multi-level stand that fills the space between a tall cabinet and an armchair.

Materials used to create products

When creating forged coasters, the following materials and blanks are used:

Rods of square section. They are used to create floor stands that are combined with classic interiors.
Round rods are used to create products complex design. They look more elegant and are suitable for rooms decorated in a romantic interior.
Thick wire. This material is used to create lungs wall structures. They look elegant and can be made in a variety of styles. Often coasters with complex patterns are made of wire.
Decorative elements. These include leaves, metal insects, balls and spirals that make the stand more attractive.

If desired, you can find standard designs, made, for example, in the form of a bird's nest.

What to look for when buying coasters

When choosing a particular product, the first thing you need to pay attention to is the quality of the stand. To do this, you need to consider in detail the connections of structural elements. It is on them that the main burden is placed, so before buying it is worth evaluating how reliable they are.

If you look at the surface of the material, on some products you can see traces of the tools that the master used. If they are not single, then this is not a sign of low quality.

Stands must not wobble or have moving parts. If there are burrs or sharp edges where the welds have been made, the stand is a hazard to anyone who enters the room or moves around the area (when it comes to street structures). Also talking about the quality and the influx of metal at the junction of the elements. They must be invisible.

Attention is also drawn to the material intended to protect the surface from adverse factors. Often paint is used, so you should look for chips and swelling. If the coating is damaged in even one place, it can lead to rust and change in appearance.

Coasters in landscape composition

Due to the strength of the metal, flower stands made of this material can be located not only in the house, but also in the garden. They will not deteriorate under the influence of precipitation or temperature. For protection, the material is coated with an anti-corrosion compound.

Metal flower stands are often used for container gardening. This method involves the use of containers in which not only flowers, but also shrubs with trees can be located. Such designs perfectly complement the many styles in which a suburban area can be decorated.

Container gardening helps to transform the porch of the house or the area around the pool. Such decorative items are often used near restaurants or cafes. With the help of properly selected coasters, it is easy to emphasize the features of landscape design.

When choosing a design for a garden, you should pay attention to several characteristics:

design style;
the area on which the installation will be carried out;
the number of plants;
color spectrum.

Benefits of container gardening

Flower stands are often used in container gardening, which is versatile and suitable for many areas. If the choice has not yet been made, then you can familiarize yourself with the advantages of this method of gardening:

Containers do not need a dedicated area, because they can be installed anywhere on the stand.
The described products can be used for both vertical and horizontal landscaping of a suburban area.
The choice of stands and containers is limited only by the imagination of the garden owner and the design style.
With the help of containers, you can plant almost all plants that are used for landscaping.
The use of coasters does not require much Money. If desired, the owner of the site can make supports and containers on their own.
Mobility. The described elements are easy to transfer to any place in the suburban area. It may be necessary to change the appearance of the garden during the change of season.

If the container stands are chosen correctly, they can enhance the beauty of the plants in the containers.

Advantages of forged metal products

When choosing coasters, you should pay attention to forged products, which have the following advantages:

Aesthetics. Thanks to forged products, you can transform not only the interior of the house, but also the entire site. Sometimes coasters are installed near the fence, which makes it more beautiful.
Originality. If the owner of a country house does not want to purchase standard designs, he can purchase them at custom order. If you have certain skills, you can do everything with your own hands.
Strength. Metal is a durable enough material to be used for outdoor stands. Thanks to this, the design is not only not distorted, it also retains appearance.
Resistant to precipitation and other adverse factors. For guard hardware covered with special compounds that prevent moisture from getting on the material.
Versatility. Many types of coasters can be installed both in the garden and in the house.
Big choice. Metal structures are made for installation in gardens of different styles.
Compatibility with other materials. Wooden and plastic containers for flowers can be installed in metal stands. At the same time, such designs are combined with any country house.

Do you need flower stands?

When decorating a suburban area, along with other items, it is worth purchasing flower stands, as they not only support pots with plants, but also perform a decorative function. They also contribute to a more rational organization of space. Due to the variety of designs, you can choose the one that will create favorable conditions for the growth of flowers.

If desired, you can purchase coasters with hanging elements that look elegant and unusual, attracting all the attention of guests. It is convenient to place outdoor coasters in a variety of places:

on the porch of a country house;
around the pool;
next to the flower beds;
around the facade of the building;
around the tracks.

Making a stand with your own hands

In order to make do-it-yourself metal flower stands, you need to have welding machine and bending device metal elements. Not the first stage is the creation of a project, sweat which will create a product. After that, it is necessary to select rods of a certain size and bend them in accordance with the previously created pattern.

Today, almost all houses and summer cottages are decorated with fresh flowers. They enliven the room, make the air cleaner, cheer up. To save space or create an arrangement of pots, flower stands are usually used. But store copies are quite expensive and do not please with a variety of designs. Therefore, creative people who want to create interior items with their own hands may well make a flower stand themselves.

The main types of flower stands:

forged coasters. Flowers look very elegant in them. They are durable, reliable and have an elegant look, but making them yourself at home most likely will not work, unless, of course, you are a professional master;
wooden coasters. This option is the most common. They are more economical and fit any interior. The easiest way to make a stand for flowers with your own hands is from wood. The material can serve as boards, chipboard, natural material, for example, a piece of log with branches sticking out in different directions, etc. To make a wooden stand look even better, it is usually varnished;

metal flower stands. Such stands, as well as forged ones, are not subject to self-manufacturing. The exception is combined products, in which the bases for pots are made of wood, and ready-made ones are used for supports. metal pipes with a section of 25 mm. But if you still tune in to metal flower stands, due to their reliability and resistance to external influences, you will have to buy ready-made ones;
flower stands, which are a composition of several various items. There are no longer any rules and regulations. It all depends on the imagination and the amount of free space. Below is a master class on making one of the options for such flower stands, and photos as illustrations.

Master class number 1: flower stand + decorative bird bath

This stand is more suitable for decorating a yard or an open veranda. You can use pots for it. different shapes, and possibly the same. The color in which they will be painted depends on your idea and taste preferences. In our case, the pots are one-color, but you can paint them in different colors.

For work we need:

one large and tall pot that will serve as a base;
four smaller flower pots;
one pot, which will be at the very top. It is smaller than the base, but larger than the intermediate pots. A decorative bath will be attached to it;
a metal bar as a support for the entire structure. If the store does not have the size you need, then you can buy a longer one and cut it with a hacksaw;
spray paint;
spray primer;
a small figurine of a bird made of ceramics;
waterproof adhesive.

The sequence of work is as follows:

prime the surface of the pots and after drying, cover with paint. Color can be one or more, according to your taste;
we measure and add up the height of all the pots, add 600 mm to them and thus calculate the height of the support rod. Using a hacksaw for metal, cut off a piece and hammer it into the ground by 600 mm. This action will provide the structure with a stable position;
through a hole in the bottom we put a pot base on the rod, set it straight and fill it with earth;

then we put on all subsequent pots, one after another on a rod, fill it with earth and tilt it alternately to the right, then to the left;
we install the topmost pot directly, like the base, we attach a plastic or ceramic bath prepared in advance to it. We glue a bird figurine to its edge and stand for a day until it dries completely;
after all the work is completed, we plant flowers and enjoy the result.

Master class number 2: hanging flower stand

For placement on the veranda or indoors, a hanging flower stand is most suitable. Wood and rope are the main materials needed to make it. On it you can place flowers that you do not want to hide on the windowsill behind the curtains.

To make it we need:

wooden board or shelves from old furniture;
rope, not thick, but not thin;
flower pots, in our case four pieces, and you can take it if you wish;
jigsaw;
drill;
paint and brushes;
metal ring.

in order to provide the product with the necessary strength, wooden bases, into which the pots will be inserted, should be made a couple of centimeters wider than the pot itself. To achieve this, attach the pot to the board with the wide side, circle it with a pencil, and then, measuring 2 cm in each direction, draw a square. This will be the size of the base. We draw such squares according to the number of pots;

to outline the line of the internal cut, cut out a template from cardboard paper round shape. Its diameter should be less than the circled pot by 15-20 mm. After the template is made, circle it inside each of the base squares;

now you need to cut a hole into which the pot will be inserted. To do this, attach the square to the desktop with a clamp, make a hole in its middle with a drill, insert a jigsaw through this hole and cut out the inner circle. In the process of work, be careful and do not rush, so as not to spoil the product;

after the holes for the pots have been cut in all the base squares, drill holes for the ropes in all corners of each of them. Care must be taken to ensure that the holes on all the squares are in the same places;

now you can think about the design. Paint wooden parts different colors or stain, depending on the style and interior of the room. The rope also needs to be painted, we chose black, but you can take any other of your choice. To do this, use acrylic paint;

after that, the assembly of the structure follows. It must be produced taking into account the height of the plants that will be installed in the base. We start the assembly from above: threading the four ends of the rope into the ring, we stretch them into the corner holes of the first square and tie a knot under it to fix it;

in a similar way, we fix all the base squares for the pots on the rope, and cut the remaining ends under the last one;
after that, insert the pots and hang the stand in the desired place.

Master class number 3: floor stand for flowers

With graceful curved legs, this stand will brighten up any room. It consists of a triangular base with rounded sides on which the pot will stand, shelves of a slightly smaller size and the same shape, and three curved metal legs.

To make curved legs, you will have to bend metal tubes yourself. A special bending template will help us with this.

We will need materials:

1. For stand:

2 pieces of waterproof plywood 24 mm thick - one 37x37 cm, and the second - 22x22 cm;
3 copper pipes with a diameter of 1.5 cm and 68 cm in length;
3 bars with balls at the ends for the legs;
polyurethane adhesive.

2. For template:

a piece of fiberboard or MDF 40x80 cm;
5 bars 2x4x10 cm;
clamps, screws.

Manufacturing sequence:

on pieces intended for shelves, we make markings using a compass;
cut out the details with a jigsaw, grind the edges with sandpaper;
on the basis of flower pot we draw medians so that even ones appear along the rounded sides. We place the shelf exactly in the center, press it tightly and drill three holes in its corners. The drill must pass through both parts;
we grind the edges of the shelves with sandpaper;
we fix the wooden balls used for the legs with a vise and drill holes in them;
we open the wooden parts with a layer of varnish, dry it, lightly sand it with sandpaper and apply another layer;
we also grind metal legs, apply varnish or paint;
we insert the legs into the holes on the top shelf, and at the level of the small shelf we rewind them with double-sided tape and glue them;
we insert a bar with a tip in the form of a ball into the hole of the pipe leg and fix it with glue for greater reliability.

Making a template and giving the legs a curved shape:

we mark the plate around the circumference and attach the bars to it with the help of screws;
the tubes themselves are gently pressed against the bars by means of clamps;
after the clamps are relaxed, the pipes spring back.

Many lovers indoor plants sooner or later they ask themselves: how to place all the flora in the house?

You can solve this problem quite effectively by using various flower stands in your interior.

Whether to buy a ready-made stand and how to choose, or whether to order according to an individual design or make it yourself - depends on your desires and capabilities. Even more recommendations are presented on the website http://clubsamodelok.ru

flower stands

Flower growers are well aware that plants need certain conditions in order for them to please with their juicy greenery or beautiful flowers. Some plants require more light, others less.

Properly selected flower stand simultaneously solves several problems:

Provides plants with a comfortable environment
Saves room space
Is part of the interior, emphasizing the appropriate style

Stands are floor and suspended (wall). Both of them are distinguished by a variety of designs and materials.

Floor stands for flowers

Floor stands for flowers can be either for one plant or for several. On single ones, as a rule, they have large flowers - palm trees, ficuses, hibiscus, etc.

The cache-pot of such plants is quite voluminous and heavy, therefore the stand under it must be quite strong - wooden or metal.

On racks for a group of plants - light-loving flowers are placed at the top, under them - preferring partial shade. Such stands are the most popular, as they have the following advantages:

Versatility - the ability to arrange plants with different lighting requirements
Mobility - does not require any installation work, can be easily moved to any other place
Compact - easy to fit the right amount plants in a small area

Especially effectively the issue of compactness is solved by high flower stands. There are such vertical structures that are fixed to the floor and ceiling for greater stability.

Straight high stands also look original for one plant, which in this case receives the maximum amount of light, since it is located at the level of the window.

Wall flower stands

You can decorate the empty part of the wall with the help of plants. To do this, you need a stand or shelf that is attached to the wall. There is a huge variety of such designs, for every taste and budget.

By the way, you can make a hanging flower stand with your own hands. You will need wooden planks and a thick rope. Drill large holes in each board for the pots and small holes in each corner for the rope. Install the shelves by threading the rope through the holes and securing it to the knots.

This design using natural materials will perfectly fit into the interior of a country or a country summer house. And if you paint the shelves in bright colors, then you can use it in the nursery.

Advice! In wall or hanging flower stands, it is better to place ampelous plants hanging down.

Variety of materials

The variety of materials from which flower stands are made is striking in its quantity. The simplest and most budget option is plastic, sometimes using metal hollow tubes.

Such flower stands are conveniently placed on the balcony or loggia, in the kitchen. Made in white, they look light and airy, without overloading the interior.

Their plus is that the plastic does not deteriorate in the open air, there is no need to tint.

Wooden flower stands are also popular. As a rule, they are shelves, racks or whatnots. Both floor and wall stands are made of wood.

One of their advantages is that you can always repaint in the desired color when updating the interior. Wooden structures will perfectly harmonize with the furniture in the living room or bedroom.

They are also suitable for plants on the loggia. Often they place wooden or plastic flower stands on the windowsill when the hostess has a lot, for example, violets or cyclamens that require the same amount of light.

Perhaps the most chic and sophisticated option is forged coasters. There is no limit to fantasy, and blacksmiths sometimes offer simply masterpieces: butterflies on the wall, cats on the floor, as well as scorpions, bicycles, etc.

Forged flower stand can be made in classical style, and in Provencal, and in some exotic - oriental, Japanese, etc.

The most important positive features forged products are strength, stability and durability.

Shelves made of glass and metal look beautiful. The metal base can be forged. But there are options for glass coasters on chrome tubes. Such flower stands are applicable in modern interiors.

Colorful wicker coasters will perfectly fit into the premises of ethnic style, eco or country.

Looking at numerous photos of flower stands, various in shape, color, design and material, you understand how interesting this interior detail can be.

In addition to performing their main function, flower stands attract attention with their originality and beauty.

Photo stand for flowers

Often there are so many pots with plants in the house that you just have to think about the construction. Moreover, these can not only fit perfectly into the interior, but also allow you to place much more green pets. Consider the most popular variations on this theme that designers and just home craftsmen can offer us.

DIY flower stand

Of course, there is a big difference when choosing a model do-it-yourself flower stands what are you doing it for. Some models are ideal for urban apartments, they are extremely compact and take up all the space offered. Others will look great in a wider apartment with large windows, a large area of glazing, respectively, and with a large amount of sunlight. In this case, you can first think about the aesthetic side of the craft. And one more option, when it comes to decoration, special models are already used here, often using improvised materials that are simply impossible in urban apartments. But, no matter what task you face, in the publication you can find models that are suitable for solving a particular problem.

Let's start, perhaps, with the classification that absolutely all do-it-yourself flower stands for the home are subjected to, wherever they are. All of them can be divided into groups, for example, wall and floor, which serve to support plants. various kinds. For example, it will be very difficult to keep ampel varieties with vines or branches hanging down on a single or multi-tiered floor stand, it would be much more rational to put them on a special wall structure or even pick them up on a mount driven into the wall (specially designed for hanging).

In the photo you see a variety of wall structures that will perfectly perform their functions even in the room itself. small size without interfering with other furnishings.

In turn, floor are divided into stationary or mobile, which are equipped with wheels or other means of transportation. Each solution has both strengths and weaknesses and again, we must judge the rationality of the choice in terms of the needs of the plant itself. If you want to give a particular flower or a small number of them the opportunity to receive uniform sunlight, fresh air, for which they will need to be moved from time to time over short distances, then you can choose a mobile model. On the other hand, on a stationary, durable one, in which many parts are fixed to each other and they can withstand significant loads, several times more pots will fit than on a mobile one, which cannot leave a real grower indifferent when making a decision. You can see many examples like this do-it-yourself tall flower stand, it can occupy not only the entire window space, but also the entire wall or a designated corner from the floor to the ceiling itself. At the same time, the shelves are equipped with electric lamps for uniform illumination, as well as convenient trays for cleaning and caring for plants.

DIY floor stand for flowers

Convenience do-it-yourself floor stand for flowers lies in the variety of forms it can take. From small decorative planters for one pot, to whole trees with outstretched branches. Rules to be taken into account when arranging such floor decor no less than when we did, because all plants on a common structure should be convenient and comfortable to grow qualitatively, delight you with flowering and healthy foliage.

Be sure to observe the correct overall dimensions of any type of floor DIY flower stands. Photo The ones you see above show plant placement options. It will be easiest for you to develop a model and its drawing when you initially understand what kind of plants you are creating a craft for, what size the main pots will be, what height the stems and leaves will grow about. The minimum height between tiers is 40 centimeters, even when it comes to growing miniature cacti or violets. All the same, plants need fresh air, light, and the convenience of watering plays an important role. Therefore, with a limited height of the overall structure, it would be advisable to place places for pots not in even rows, but in a checkerboard pattern.

The photo shows the most simple options floor models. For the manufacture of do-it-yourself metal flower stands you may need metal profiles or even pipes if such a design fits into the design of your apartment. Such profiles are interconnected using standard fasteners, and the tops, stands, are made of wooden planks. To make the craft look no worse than the one bought in the store, carefully cover it with paint of one tone, which will make it look more strict.

If we are, then wood will be the ideal material for work. In the photo you can see interesting option do-it-yourself wooden flower stands, which is perfect for such a vintage style. At the same time, working with wood will not differ much from the construction of a banal rack. It is only necessary to pay more attention to the legs, on which the main decorative load lies. It is their bent shape that makes a simple stool a vintage stand. In the end, you can not only cover the craft with white paint, but also rub it a little with sandpaper to artificially age it, and you can also decorate it with decoupage patterns and pictures.

How to make a DIY flower stand

For the arrangement of a large country house or suburban area characteristic craving for the same large scale, even if it concerns the task, how to make a flower stand with your own hands. Indeed, if there is a lot of space in the rooms, then the design does not have to stretch only upwards, you can make it quite voluminous, not only convenient to use, but also representing a certain decorative value.

So, today, models are very popular DIY wooden flower stands, which are in the form of a stepladder or ladder. They look very appropriate country interiors or in beautification. Moreover, you can easily find tips on making such crafts on sites on dacha construction, use drawings of standard ladders and ladders. The beauty of this particular model is that the plants will be quite comfortable on different tiers, they do not close the light from each other, it is convenient to take care of them without removing the pots from the shelves, and so on.

Use in the construction of a country house do-it-yourself flower stands from improvised materials will always be very appropriate, so you save the perimeter from unnecessary things, and make a new decorative and useful object on the site. Such improvised materials can be not only car tires, but also old boxes, wooden pallets, even an old one that has served its purpose. garden tools etc. You can see interesting examples of such from improvised materials in the photo.

Do-it-yourself flower stand on the windowsill

Stationary structures that are compactly installed within the window sill represent a separate group. After all, it is necessary not only that it looks beautiful, is convenient to use and suitable for growing green pets, but also that do-it-yourself flower stand on the windowsill would not interfere with your normal use of the window, keep it clean, would not prevent sunlight from entering the room.

The smallest options suggest simply decorative ornament for one or two pots. This placement is intended to slightly change the appearance of the flower arrangement, which is located on the windowsill. But still, most often there is a need to make a solid and rational assembly that would fit several pots at once. You can see such options in the photos in this section. It is very important in this case to strike a balance between strength and stability, but at the same time the stand must be mobile. After all, it will need to be cleaned from time to time when you need to wash the window, window sill, change the curtains and so on.

Concerning decorative design, then, of course, collections of plants of the same species will look most impressive, such as, for example, several phalaenopsis orchids in transparent pots or baby violets in multi-tiered racks.

Do-it-yourself flower stand

original ideas do-it-yourself flower stands you can also find a lot. Of course, forged, metal figurines look very beautiful, which you can buy in a store or order at a blacksmith's workshop. If you have certain tools, you yourself can build similar ones, but for this, of course, you also need a certain skill. Among other photographs, you can see one not quite ordinary one - this is a combination of a flower stand and in one product.

Such an idea may only seem strange at first glance, because cats really love trees, climb them, rest in the shade of foliage, and sometimes, to be honest, bite off a leaf or two. Here you are simultaneously given the opportunity to please the cat and optimize the cumbersome cat attraction, which (cat lovers know) literally takes up half the room. The base will be a standard house with a scratching post, but the superstructure can be thick branches, sanded and processed, to which rings are attached to accommodate pots. It is important to securely attach the structure to the floor or wall using standard fasteners so that in the midst of violent cat games, the flower does not fly to the floor and break, and, even worse, does not injure the fluffy robber.