Over time, the spiral of the electric kettle and its entire inner surface are covered with a hard coating. It interferes with the full operation of the device and gives the water a not very pleasant aftertaste. Therefore, you should not wait until the deposits begin to fall off and eventually fall into a cup of tea. It is better to know in advance how to clean the appliance from scale. Moreover, regular prevention of the formation of limescale is always more effective than the fight against an existing problem.
Folk remedies to combat scale
Since scale dissolves easily in an acidic environment, citric or acetic acid is most often used to remove it. Sometimes baking soda, lemon, or even potato and apple peels are used.
The main ways to remove scale in an electric kettle:
- Pour water inside and add half a glass of vinegar there. Boil the solution and let it cool naturally. It is advisable to leave it for two hours or even all night. Pour out the vinegar water and rinse thoroughly electrical appliance running water.
- Instead of vinegar, you can use citric acid at the rate of 1 tablespoon per one and a half liters of water. Bring the solution to a boil and leave for 20-25 minutes. After complete cooling, wash the surfaces with a soft sponge for dishes.
- Baking soda will also help clean up. To do this, pour 5 teaspoons of soda into a liter of water and boil the solution.
- If the house does not have any of the above, you can rid the electrical appliance of scale with the help of a lemon. Just add a few peeled pieces to water and bring it to a boil.
- Some housewives use washed potato or apple peels to remove scale. Only in this case, the kettle will have to be boiled several times, since this remedy is not as strong as acids.
- Since vinegar is present in cucumber or tomato brine, you can use them to clean the scale.
- Finally, the last, most modern method of removal is based on the use of sweet colorless soda. Buy a bottle of this water, shake it thoroughly to remove gas, and pour it into an electric kettle. In this case, it is enough to fill it halfway. Bring the water to a boil and let it cool. The acids contained in the soda will clean the electrical appliance from scale. Just do not use cola, fanta and other drinks with dyes, otherwise they will stain the inner walls, and you are unlikely to be able to wash them.
For the most stubborn hard deposits, it is better to use several methods at once. For example, first clean citric acid and then vinegar. Or vinegar and baking soda, etc. Such combined products, if they don’t clean it completely, will make the plaque loose, which will make it easy to wash it off with a regular dish sponge.
Household chemicals to deal with scale
Sold in stores special means for descaling. Each of them is accompanied detailed instructions. They will help clean the electric kettle much faster. However, after using them, it is necessary not only to rinse it well with water, but also bring it to a boil several times and drain already. clean water. Otherwise, acid residues can get into tea or coffee.
Cleaning rules
When using any anti-scale products, we recommend that you adhere to the following rules:
- First of all, warn your family that you are cleaning an electrical appliance. For example, stick a note to it or move it to an inaccessible place. Better yet, do it when no one is home. Otherwise, someone will definitely pour himself coffee with acid while awake.
- After using any product, rinse the kettle several times and boil plain water in it two or three times, each time pouring it into the sink to get rid of all harmful substances.
- Do not use abrasive products: metal sponges, dry powders, etc. They may remove the plaque, but at the same time they will ruin the electrical appliance.
- Make sure that there are not too many deposits on the walls. It is more difficult to remove a thick layer than a thin one, and even with such a careless attitude, equipment will fail prematurely.
- If possible, use only filtered water. IN last resort, get in the habit of defending it before use and decontaminating it with a piece of silicon. So you will not only extend the life of your pet, but also take care of your own health.
Never neglect a timely cleaning! Then he will definitely thank you with fragrant morning coffee or your favorite sweet tea for breakfast.
Evgeny Sedov
When hands grow from the right place, life is more fun :)
Content
Look inside your favorite pot for boiling water for tea and you will see white streaks, deposits on the walls. Any electric kettle will accumulate a layer of lime over time if it is not regularly cleaned. This plaque contains hard deposits of minerals when hard water is used, which does not pass through the filter. "Crust" on the walls impairs the operation of heating devices, is harmful to health. After reading the material, you will learn how to remove salt from the inside of electric and other tea utensils using traditional folk remedies.
How to remove scale in a kettle
To clean it from mineral plaque, especially if this dish is used daily, it is imperative to systematically. The formation of deposits depends on the quality of the water used: if it is hard, then a layer of mineral plaque and lime will form on the walls much faster. How to wash the kettle from scale? There are various tried and tested home tricks to help remove these mineral deposits. Soda, vinegar, coca-cola, citric acid, products from the department household chemicals are working to fix this problem.
How to clean a kettle with citric acid
How to remove scale in a kettle using citric acid? It cleans metal brewing, plastic, glass products. In order to clean, you will need to boil half a liter of water, adding 2 large tablespoons of citric acid there after boiling. Wait a couple of hours for the water to cool. Removal of the "crust" on the walls, cleaning will occur on their own. It rarely takes a little help with this solution to successfully fight plaque. After that, boil clean water again inside, drain it. Your tea will become tastier and your health will not suffer.
Descaler
How to clean the kettle from scale using specialized cleaning products from the household chemicals departments of stores and supermarkets? With their help, you can wash a product made of stainless steel or any other material. To find out if a cleanser is right for you, read the label carefully before buying. After purchasing the product, you only need to strictly follow the attached instructions. As a rule, you need to boil water, add powder, cool this solution, drain it and wash it well. clean water, boiled a couple of times.
Vinegar
Try an effective, inexpensive way to descale your kettle with vinegar. It is aggressive, so the method is suitable for removing heavy mineral deposits. It is used for tea utensils made of glass, plastic, metal. To carry out the removal of plaque, you will need to pour half a liter of water, boil, add a glass of 9% vinegar, leave for an hour so that the process goes arbitrarily. Sometimes you need to walk along the walls with a sponge. An important condition is to thoroughly rinse the heating device from vinegar after the procedure, then boil it a couple of times with clean water.
soda
To clean an enameled kettle, aluminum utensils, soda will help - a folk remedy for scale, which is easy to find in retail and costs a penny. This will require 500 ml of water and a tablespoon of soda ash. If the mixture does not cover all limescale, then increase the amount of water with soda. Bring the resulting solution to a boil and cook it over low heat for half an hour. To enhance the effect, leave the water with soda to cool there for a couple of hours. If necessary, rub the excess with a sponge, rinse the dishes well and boil clean filtered water there.
How to descale a Coca-Cola kettle
Try in practice another extraordinary way to fight against mineral plaque, which will require a strong carbonated drink containing citric acid. This option is only suitable for electric heaters. How to clean the kettle from scale, just adding Coca-Cola? First of all, you need to release gases from the drink, leaving it alone with the lid ajar for an hour, pour it into a bowl and boil. Leave to cool for a while, if necessary, rub with a sponge or hard washcloth. Drain the liquid, rinse with clean water.
Video on how to get rid of scale in an electric kettle
The energetic and very nice presenter of the video will popularly talk about the simplest but most effective measures for cleaning electric cookware in order to forget about plaque for a long time. How to remove scale in an electric kettle? If you have such a heating device for making tea, then this video will help. After watching the video, you will understand which tool is suitable for your case. Spend just a couple of minutes of your personal time, but you will understand which is better - soda, vinegar or lemon?
Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!There are many mineral impurities in tap water. It is they who form limescale and insoluble sediment inside the kettle. Scale damages the walls and bottom of the dishes, heating elements appliance and affects the taste of water. I'll tell you how to clean the kettle with citric acid.
Ways to eliminate scale
Acids react with salts (scale) and convert hardened deposits into a soluble form. Cleaning methods are based on this.
Depending on the degree of salt contamination, determine how much citric acid is needed to clean the kettle:
| A photo | Description |
 |
With a slight draft and for prevention
For single use - a bag of 50 g or 2 tbsp. spoons without a slide. The price of such a descaler is about 20 rubles. |
 |
With multi-layer precipitation
You will need 2 sachets of 50 g. For primary cleaning - 1 pc., for reuse - 1 pc. Do not exceed the amount of powder, otherwise you risk damaging the inside of the dish. |
Method 1: universal
I offer the most effective and economical way to remove scale in a kettle with citric acid. Suitable for enameled, glass and stainless steel dishes:
| A photo | Subsequence |
 |
Step 1
Make a citric acid solution:
|
 |
Step 2
Boil the solution:
|
 |
Step 3
Wait for the boiling water to cool and pour it out. Inspect the surface: if plaque remains, remove it with your own hands - rub it with a dish sponge. So the softened sediment will be removed. |
 |
Step 4
Thorough dishwashing:
|
Method 2: gentle cleaning
The safest way to descale a kettle with a plastic or glass surface is to use a lemon. With this fruit with a high acid content, you can easily get rid of salt and lime deposits on dishes, give them a shine:
| A photo | Instruction |
 |
Training
Cut the lemon into wedges and place in a cleanable container. Fill the dishes with water: 1 liter - 1 lemon.
|
 |
Boiling
Boil water and cook the sour fruit for 10 minutes. Switch on the kettle again after 5 minutes. Leave the boiling water to cool for 1-2 hours, during which time the lemon will soften the scale. |
 |
cleansing
Wash the solution under running water. A loose sediment can be easily removed with a sponge. |
Method 3: from multilayer sediment
The main active composition of professional cleansing products is acids and sodium carbonate. At home, you can replace these products with vinegar, lemon and baking soda:
| A photo | Instruction |
 |
Determine if a method is safe:
|
 |
Stage 1: soda treatment
|
 |
Stage 2: treatment of scale with citric acid
|
 |
Step 3: Vinegar Treatment
|
 |
Stage 4: Sludge removal
How to wash the scale in the kettle:
|
Method 4: for electric kettles from stubborn sediment
Citric acid for a kettle is safe, and in combination with soda, it quickly removes even plaque that has eaten into plastic:
| A photo | Instruction |
 |
Determine if the method is safe.
Can be cleaned Electric kettle from any material with a closed heating element. Exposed electroplating will be damaged! |
 |
Step 1
Make a solution of citric acid (st. Spoon per liter) and fill it with half the volume of the container. Boil liquid. |
 |
Step 2
Pour soda into the hot solution - a teaspoon per liter. She will enter into chemical reaction with acid liquid. The resulting foam destroys the layers of scale from the inside. |
 |
Step 3
Wait for the liquid to cool, then wash the kettle. |
Output
Now you know the most effective and cheapest ways to clean the kettle with citric acid. Also check out useful advice in the video in this article, and you can ask questions in the comments.
Scale appears due to impurities contained in poor-quality water. During boiling, they settle on the walls of the kettle and spoil the taste of hot drinks. Also, scale does not conduct heat well, so a dirty kettle will boil longer.
How to clean a kettle with vinegar
The method is suitable for very dirty teapots made of plastic, glass, stainless steel.
You will need:
- ½ liter of water;
- 1 cup 9% vinegar or 2 tablespoons 70% vinegar essence.
Heat water in a kettle, and then pour in vinegar or vinegar essence and leave the solution for an hour. During this time, the scale will soften. Rinse the kettle from the inside with a sponge, boil clean water again and drain it.
How to clean the kettle with lemon or citric acid
The method is suitable for electric kettles made of stainless steel, plastic or glass with a moderate layer.
Not suitable for enamel and aluminum kettles.
You will need:
- ½ liter of water;
- ¼ lemon or 2 tablespoons citric acid.
Heat water in a kettle and put a piece of lemon or citric acid into boiling water. Leave the scale to soak for 1-2 hours. Rinse the teapot with a sponge and rinse thoroughly. After the first boil, the water will need to be drained.
How to clean a kettle with baking soda
The method is suitable for any kettles.
You will need:
- ½ liter of water;
- 1 tablespoon of baking soda.
Stir the baking soda in a glass of water so that it dissolves completely. Pour the resulting liquid into the kettle, add the remaining water and boil it. Wait half an hour or an hour and heat the kettle again.
Now you can wash the kettle and boil clean water in it. True, after it will have to be poured.
How to clean a kettle with soda
The method is suitable for stainless steel kettles heated on a stove.
Not suitable for aluminum, enamel and electric kettles.
You will need a bottle of any lemonade. The most famous option is cola, but it is better to use a colorless drink (it is important that the composition contains citric acid).
Let an open bottle of lemonade sit for 2-3 hours to eliminate gas bubbles. Then it's simple: pour the drink into the kettle and bring to a boil. Then thoroughly wash and rinse everything.
How to peel a kettle
The method is suitable for enameled and metal teapots with a weak layer of scale.
Not suitable for electric kettles.
You will need:
- ½ liter of water;
- skin 2-3, apples or pears.
Rinse the cleaning from dirt and sand, put them in a kettle and fill with water. Boil the liquid and leave to infuse for one to two hours. A light layer of scale will come off on its own, rub stubborn dirt with a sponge for washing dishes. After rinsing, the kettle will shine like new.
If you have a particularly capacious kettle, and scale has accumulated on the walls, take more water than indicated in the recipes. The liquid must cover the contaminants completely.
How to keep the kettle clean for a long time
- Pour soft water into the kettle. If you don't buy bottled, use a filter. Or at least stand your tap water for a few hours to allow the impurities to precipitate.
- Boil water in the kettle no more than once. Better fill it fresh.
- Rinse the inside of the kettle at least once a day. And ideally before each use.
- For prevention, once a month, boil a filled kettle with one tablespoon of citric acid.
In any water heater, from time to time we find a treasure of minerals, namely, deposits of magnesium and calcium salts from hard water. And if we always try to prevent the formation of scale in the dishwasher and washing machine, then what can we say about the kettle, where it not only impairs its performance and leads to breakdowns, but also harms the health of the household.
In this article, we have collected 6 of the most effective and affordable ways at home to help you descale the kettle. Really everyone's secret folk remedies very simple:
- Scale in a kettle or electric kettle is afraid of organic and inorganic acids, so almost all methods for removing it at home are based on the use of acid-containing products.
Method 1. How to descale an electric kettle with vinegar
Manufacturers of electric kettles do not advise using vinegar to remove mineral deposits - after all, it is too aggressive. But sometimes without it strong remedy can't get by.
The method is suitable for: plastic, glass and metal teapots with a very large amount of old scale.
Ingredients: water - about 500 ml and vinegar 9% - a little less than 1 cup or vinegar essence 70% - 1-2 tablespoons.
Recipe: pour water into the kettle and boil it, then pour acetic acid into boiling water and leave the scale to soak in the solution for 1 hour, during which you should periodically lift the lid and check how the scale is peeling off the walls of the kettle. If the scale has not gone away on its own, but only loosened, then it will need to be removed with a sponge. Remember to boil water in a clean kettle once or twice, and then rinse it well to wash off any remaining vinegar.
Method 2. How to descale an electric kettle with citric acid
The method is suitable for: cleaning electric kettles made of plastic, stainless steel and glass with light or moderate contamination.
Ingredients: water - about 500 ml and citric acid - 1-2 tablespoons (depending on the degree of contamination). A quarter of a lemon can replace powdered acid.
Recipe: also pour water into the kettle and boil, then pour citric acid into boiling water or put a quarter of the lemon and wait until the water cools for about 1-2 hours (the acid that got into hot water, "hiss"). If the scale is not old, then it will come off on its own. Otherwise, you will have to make a little effort. Do not forget to boil water in a clean kettle, and then rinse it well.
Method 3. How to get rid of scale in a kettle of any kind using soda
enameled and aluminum cookware afraid of aggressive acids, so the first 2 ways to remove limescale are not suitable for them, but a regular soda solution can help you.
The method is suitable for: descaling both in ordinary enameled and aluminum kettles, and in any electric kettles.
Ingredients: baking soda, and preferably soda ash - 1 tablespoon, water - about 500 ml (the main thing is that it covers the entire limescale).
Recipe 1: to remove scale from the walls of an enameled or aluminum kettle, you must first mix soda with water, then bring this solution to a boil, and then leave it to simmer over low heat for half an hour. At the end of the procedure, we wash off the remnants of soda, for which we boil clean water 1 time, drain it and rinse the kettle.
Recipe 2: To clean an electric kettle with baking soda, you need to boil water, make a soda solution, and then let it cool for 1-2 hours. A more gentle way is to pour soda into boiling water, and then leave the solution to cool completely - during this time, the mineral deposits will become softer, and it will be easier to wash them by hand.
Method 4. How to descale the kettle with Coca-Cola and Sprite
This method is not the most efficient and economical, but why not try for fun?
The method is suitable for: descaling in ordinary stainless steel kettles and for electric kettles, but for enameled and tin ones - with caution.
Ingredients: any carbonated drinks with citric acid in the composition are suitable - from Coca-Cola to Fanta. But it is better to take colorless drinks, for example, Sprite or Schweppes.
Recipe: First, we release gases from the drink, then pour 500 ml of liquid into the kettle and let it boil and then cool. The result of the experiment can be seen in this video.
Method 5. How to remove scale in a kettle using apple or potato peels
This product is suitable either for preventive care, or if the limescale is still weak.
The method is suitable for:
Ingredients: Apple, pear or potato peels.
Recipe: put apple, pear or washed potato peels in a kettle, pour water and bring to a boil. As soon as the water boils, leave the peel to cool for 1-2 hours, and then wash the softened plaque with a sponge.
Method 6. How to remove scale in a kettle using brine
Since the brine contains organic acids, it can also be used to remove scale and rust. Therefore, if you have at hand a pickle from under cucumbers or tomatoes, which, as often happens, has nowhere to go, feel free to put it into action.
The method is suitable for: descaling conventional enameled and metal kettles.
Recipe: pour the brine into the kettle through a sieve (so that nothing extra is left in it), bring it to a boil, then leave the brine to cool for a couple of hours. Using a sponge, we clean off the remnants of limescale and rust and, finally, rinse the kettle clean with running water.
