How to make stickers from tape. How are stickers made? What do I need to make my stickers? Making stickers from self-adhesive paper

All kinds of stickers can be made not only with the help of modern printing, but also at home on your own.

First way

First of all, you need a drawing. You can draw it by hand or use a ready-made drawing on a computer. In the first case, the drawing will be original, in the second it will be easier to change something in it (for example, the dimensions of the sketch). You can combine these 2 methods: first draw with your hand, and then photograph or scan the resulting drawing.

Plain paper is suitable for printing stickers. They will look brighter and more attractive if you use colored paper. You can reproduce them with an ordinary photocopier. It remains only to stick the resulting sticker. The choice of glue depends on the surface on which our drawing will be placed. for sticker big size You can use a roller and wallpaper paste.

The main disadvantage of such stickers is their fragility. Pictures drawn with a marker or pen quickly fade and blur.

Second way

Good for small stickers. First, as in the first method, we create a drawing. After that, instead of glue, we use double-sided tape. At the same time, we attach one side to the back of our drawing, and the other to the wall.

Third way

The front part of the sticker can be protected from the harmful effects of various harmful factors (ink lag, mechanical damage). To do this, we need a regular transparent adhesive tape. It is better to take a wider adhesive tape, this will reduce the number of seams. Do not glue the entire strip of adhesive tape to the drawing at once, start gluing from one side. This will allow less air to get under the tape. Remember to smooth it with a plastic card or a ruler ( any will do object with a smooth, hard edge). You can also use thermal film, which can be purchased at an office supply store. To do this, just put it on the surface of the future sticker and iron it with an iron.

Fourth way

Self-adhesive paper can be used to make stickers. The drawing is applied to it in the usual way. You can also use decor paper. Its surface is glossy, so conventional paints, ink or a pen will not draw on it. This is where markers for glass or CDs come in handy. You can use gel pens or try to make an application from the same paper in a different color.

Fifth way

You can use a stencil to make stickers. This method can help out if you need to make a large number of stickers, and there is no copier or printer at hand. We make a stencil. Now we stamp it with a spray on paper.

Hello friends! When was the last time you cleaned up your workspace? Documents, tools and other things were laid out on the shelves. Of course, you can decompose and remember these places once, but it’s better to sign them. This will more strictly maintain the order of things in their places. But how to sign them? Today we will analyze various options for making stickers or stickers based on paper.

So, to make the simplest version of the sticker, we need printer paper and glue. Of course, the sticker can be drawn or written by hand, but as they say, I am an artist from the word "Bad", so I prefer to use computer technology in all design matters. In any editor available to you, we make an inscription with or without a picture.

How to make a sticker with your own hands

We print on the printer, cut it out and glue it in the right place. That's all. But this method has its drawbacks. This is the durability of the sticker. She can rub, tear. If it was printed on an inkjet printer, then ink may spread from accidental moisture.

I improved this method a little by adding some adhesive tape to the sticker, of course, stationery. Adhesive tape allows you to protect the sticker from all the above disadvantages.

The technology for using adhesive tape for stickers is simple. Necessary front side Carefully apply the stickers on the adhesive side of the adhesive tape so that a few millimeters of the free area of the adhesive tape remains on its sides. If the sticker is small, then cut off the excess tape. Next, turn the sticker over and apply it to the desired location. Gently smooth the tape around the edges. The manufacture of such a sticker does not require the use of glue. And outwardly it will look like laminated. This method also has its drawback. This is a limited size sticker with a scotch width, usually 5 cm, but that was enough for me. To make a sticker bigger size You must use self-adhesive printer paper. Print the desired text or picture, cut and glue. Only now it will be necessary to fork out for such paper, and even all the shortcomings of ordinary paper are inherent in it. And do you need it?

Especially for readers of the blog "Your computer" are developed canning jar stickers. The set consists of 4 sheets of 15 colored stickers of different themes: "Jam", "Jam", "Compote", "Pickles". Print them on a color printer and stick them on the jars with adhesive tape.

Download pdf sticker set for canning jars. Happy canning.

Yes, I almost forgot. On the Internet, I came across another way to make stickers based on adhesive tape. Only for its implementation it is necessary to print an inscription or a picture on a laser printer. not suitable for this method. Everything is done as I described above, just before gluing paper base soaked in water and gently rinsed off. The image remains on the adhesive tape. The advantage of this method is that the background of the sticker is transparent. These are the ways you canmake a stickerwith your own hands. Choose!

Dear reader! You have read the article to the end.
Did you get an answer to your question? Write a few words in the comments.
If no answer is found, indicate what you are looking for.

Are you looking for a new creative project? Try making stickers! They are easy to make right from scrap materials you probably already have at home; You can also create professional-looking stickers using self-adhesive paper, which is easy to find at any office supply or craft store. After reading this article, you will learn how to make stickers with three different ways: based on glue, using adhesive tape or self-adhesive paper.

Steps

Production of adhesive stickers

Come up with a sticker design. At self-manufacturing With stickers, your flight of fancy is unlimited. Use whatever drawing medium you want: colored pencils, markers, pastels, wax crayons, whatever. Make sure that the markers, pastels, and other drawing media you use are water-resistant. Draw the sticker design on a separate piece of paper or directly in a notepad. Consider the following ideas as you think through your design.

Draw a self-portrait or portraits of your friends or pets.
Cut out graceful images and phrases from magazines and newspapers.
Print pictures from the Internet or images you have on your computer. For best results, print them on thin printer paper, not photo paper.
Take advantage ready-made templates stickers from the internet that you can print.
Make pictures with decorative stamps.
Decorate the image with sparkles.

Cut out stickers. Use scissors for this. Make stickers as big or small as you want. For patterned edges on stickers, use shaped scissors to create an interesting cut pattern.
- Try using shaped hole punches to make hearts, stars, and other shapes out of patterned paper.
Prepare the glue. This glue is safe for children, similar to the one used on envelopes. It will provide adhesion of the sticker to most types of surfaces, but it does not contain harmful chemicals. To make the glue, mix the following ingredients in a bowl until a homogeneous mixture is formed:

Apply adhesive to stickers. Lay the stickers back side up on a piece of waxed paper or aluminum foil. Take a paint brush or a baking brush and brush the back of the stickers with glue. When you are done, let the glue dry completely.
- There is no need to completely soak the stickers with glue, just apply it in a thin layer.
- Make sure the stickers are completely dry before using them.
- Store your finished stickers in a plastic bag or plastic box until you are ready to use them.
To apply the sticker, lick it from the back. When you're ready to stick your sticker to any surface, just lick it reverse side, as you do with stamps, and then briefly press the sticker onto the desired surface. Homemade glue is strong enough, so be careful when sticking the sticker.

Making stickers with adhesive tape

Cut out images from magazines or print your own sticker designs. For this method, you need images that have been printed on paper using waterproof inks. You can use the glossy pages of magazines or books, or you can experiment with your printer's inks and try printing options from your computer. If you are printing pictures, make a test piece first to pre-wet it to test for durability before you start making the actual stickers. Cut out the images and phrases you like with scissors.
- When selecting images, do not forget about the width of the adhesive tape. Each sticker must fit within the width of one of its strips. This means that the picture should not be wider than the adhesive tape.
- If you want to make a larger sticker, you will need to line up two strips of tape. It may not be so easy. You need to align the tape in such a way that its strips overlap quite a bit, and at the same time the paper does not look through between them. When failed attempt your sticker will be damaged. If successful, only the seam at the point of contact of the strips will be visible on the sticker.
Cover the sticker designs with tape. Cut out a piece of clear tape large enough to completely cover the cut out sticker design. Stick it on the front side of your cut or printed design. Press the tape against the paper so that it adheres well to the drawing.
- Be careful when you stick the tape on the image. It is necessary to change its position, and the picture will tear. Also try to make sure that there are no air bubbles or wrinkles when sticking the tape.
- Consider using double sided tape. Double-sided tape is available in various types: in rolls, sheets and even as part of special machines for the production of stickers, for example, the Xyron brand.
- Consider using Japanese paper tape (washi tape). It is similar to tape and is great for making stickers because it sticks when you want it and also peels off easily if you need to. Japanese paper duct tape comes in a variety of colors and patterns. If you want to make stronger stickers, you can use duct tape.
Rub the front of the sticker. Take a coin or use your own fingernail to press down on the front of the sticker and rub the surface to get the paper's ink to bond with the tape's adhesive. Continue rubbing the sticker for a few minutes to make sure the ink bonds to the adhesive backing of the tape.

Rinse stickers in warm water. Take the stickers one at a time and rinse them under water, put the paper side under the stream until the paper starts to fall off. The ink will not be washed off with water, and the paper will completely dissolve. You can speed up the process by rubbing the paper.
- Make sure you wet the entire surface of the tape at the sticker, not just part of it. If you concentrate your efforts on only one area, then only this area will be visible on the sticker.
- If the paper does not fall off, continue soaking the sticker under warm water.
- Alternatively, soak the stickers in a bowl of warm water. Completely submerge the stickers in water and leave to soak for a few minutes.
Let the stickers dry. After removing the paper, allow the stickers to dry completely so that the adhesive layer of the tape becomes tacky again. Use scissors to trim the excess tape around the decal design, then stick the decal to the surface of your choice.

Making stickers from self-adhesive paper
1. Buy self-adhesive paper. In craft or office supply stores, you can find paper that has an adhesive layer on one side. It is usually protected by a backing which is removed when the paper needs to be adhered.
2. Design your stickers. Draw stickers on your computer, or use markers or pens to draw pictures directly on the adhesive paper. You are only limited by the paper size. You can even make an A4 sticker if you want!
  - Draw stickers on your computer using Adobe Photoshop, Paint, or another graphics program. As stickers, you can simply use photos from your personal album or from the Internet. When you're done, print the images on self-adhesive paper.
  - If you have a printed photo or drawing that you want to make a sticker from, simply scan it or download a digital image source to your computer. Edit this file in Photoshop, Paint, Word, or Adobe Acrobat, then print on self-adhesive paper.
  - Draw pictures directly on self-adhesive paper using pens, pencils or paint. Just don't wet the paper too much, otherwise you could damage its adhesive layer.
3. Cut out stickers. Use scissors to cut out printed sticker designs. You can cut the stickers into simple rectangular shapes, or you can use special shaped scissors to create interesting patterned edges. Your stickers should be spaced about three millimeters apart on the sheet so that when you cut one sticker, you don't accidentally damage adjacent stickers.
  - When using double-sided adhesive sheets, simply tear off the protective backing, exposing the adhesive layer of the sheet. Attach the stickers with the back side to the adhesive layer. Press them down so they stick well. Then tear off the sticker with the adhesive layer from the second substrate - now your sticker is sticky from the back. Stick it to any surface of your choice. You need to stick the sticker right away, as you have removed the protective backing from it.
  - You can space the stickers on the sheet further apart to allow white borders around the images, or you can cut the stickers without these borders. People who are already experienced in creating stickers sometimes leave no boundaries at all and cut out stickers with a clerical knife.

Stickers are an unusual interior decoration. They can decorate the kitchen, children's room and even the bedroom. You can use stickers to revive a dry work interior. It is useful to use them for children's creativity. After reading this article, you will learn how to make DIY stickers.

How easy is it to make them?

Stickers for kids are very easy to make. You won't need special materials and tools, all can be found at home. We will tell you in detail how to make a sticker at home.

First, select the tools and materials. You will need:

Thick white large paper. The larger the sheet, the more stickers you get. It is not worth taking paper that is too thin, because it will quickly get wet from the glue and tear.
Rulers, pencils, felt-tip pens, markers, paints - to create a drawing.
Stencils, children's coloring books and books.
Big brush.

Ingredients for making adhesive

Gelatin (approximately 8-10 grams).
Cold water (1 tablespoon).
Sugar syrup (1/2 tsp).
Lemon extract (1/2 tsp).
Hot water (3 tablespoons).

Sticker manufacturing technology

Step 1

Determine the size of future stickers. A sheet of paper must be divided into squares with a ruler and a pencil.

Take drawings from children's coloring books or books.

You can choose the drawing you like, and then print it on a printer or redraw it directly from the screen with a bright felt-tip pen onto a thin sheet of paper.

How to make a sticker so that everyone likes it? Look for images of famous characters from cartoons and fairy tales. In addition, butterflies and flowers are always beautiful. Before the New Year holidays, you can make stickers with Christmas trees, snowmen, the symbol of the year.

Step 2

Decorate drawings. You can use not only traditional pencils, felt-tip pens and paints, but also glitter gels. The finished base with stickers does not need to be cut yet, we will cover it with adhesive.

Step 3

We make the adhesive base of the sticker.

To make DIY stickers, you will need homemade glue.

Gelatin should be poured into cold water and wait 40-60 minutes until it swells. Then heat a little and add sugar syrup and citric acid. The solution must not be brought to a boil. Remove the pan from the stove and wait until the composition cools down a little.

Step 4

Take a large brush and spread the glue on the back of the sheet. The glue should dry and the paper will curl up.

Step 5

Place the sticker sheet under the straightening press. For example, you can use a heavy book.

Step 6

Cut the stickers, wet with a damp cloth and stick.

Do not throw away any leftover glue. It will gel over time. Store it in a tightly closed jar. The shelf life of homemade glue is several months.

If you want to use again - put the container in a pot of warm water. Now you know how to make a sticker at home.

wall stickers

Another interesting way to make stickers is self-adhesive vinyl.

Step 1

Choose a film of the desired color. Choose so that the color matches the interior.

Step 2

We put the pattern on the film and cut it out. If you do not know how to make a sticker at home, choose simple patterns. When you get the first masterpiece, you can paste entire compositions.

Step 3

Carefully cut out the pattern. It is important to first attach it to the wall and make notes with a pencil where the decor element will be placed.

Step 4

Preparing the wall for gluing. The wall must be smooth, clean and dry. Rust, old paint, dirt will interfere, and the sticker will look sloppy. In addition, the wall should not be greasy. Wallpaper, if they are pasted well, will only emphasize the beauty of the picture.

Step 5

Carefully lay out the sticker on a hard surface, smooth and peel off the paper base.

Step 6

Paste on the wall. If the sticker is large, it is better to stick it with an assistant. If you work alone, you can stick in parts. Smooth the finished drawing against the wall so that there are no bubbles or wrinkles left. Now admire your work of art.

A simple sticker can change the interior for the better. Did you find out simple ways how to make a sticker at home. We hope our tips will help you enjoy your creativity.

Summary: How to make stickers with your own hands. Sticker at home. Creation of children's stickers on clothes. DIY stickers for T-shirts. Decoration and appliqués for clothes.

In this article, we want to tell you how to make bright, fashionable, exclusive stickers for clothes with your own hands together with your children. To do this, you will need ordinary plastic bags with drawings and inscriptions, parchment paper and an iron.

Making stickers for clothes at home is very simple. To do this, cut out the picture you like from the package, put it on your clothes, put a sheet of parchment paper on top, and then press it with an iron with force. Hold for 10 seconds. Let the melted plastic cool, then carefully remove the paper.

To create stickers in the way described above, plain paper, unfortunately, will not work. The image is soldered to the paper, not to the fabric. If you can't find parchment paper, try replacing it with baking paper. It is better to take beige baking paper, not white. Also suitable for making stickers with your own hands are such paper molds for cakes. See photo below. Naturally, they must be clean.

If the sticker on the clothes you made is not soldered well enough, try the above operation again.

It is better to use pictures of a small size, no larger than the working surface of the iron. In this case, you can press it and a layer of paper with an iron at a time.

It is possible to make inscriptions on T-shirts (t-shirts with inscriptions) from cut out letters. Here's a cool t-shirt you can make.

It’s also interesting to cut out some shapes from plain bags yourself. different colors. When creating stickers, you can overlay layers of plastic on top of each other, getting images.

Draw the necessary small details with a permanent marker.

Using DIY stickers, you can decorate clothes, fix holes in clothes, hide stains on your favorite outfits and children's things in case you can't get stains out of clothes. Among other things, this is an interesting, creative activity for adults and children.