Do-it-yourself bench: drawings with dimensions, photos. How to make a bench with a wooden back with your own hands.
A light garden bench is useful for you to relax in the country, you can sit on the bench in the garden and relax in the shade of trees. Wooden benches will harmoniously decorate your corner for relaxing on suburban area, and if the bench is also made by hand, it will become the pride of the owner.
Bench materials:
- Boards with a section of 20 x 100 mm or a similar size.
- Screws.
- Lacquer or paint.
Instruments:
- Hacksaw.
- Plane.
- Roulette, square, pencil.
- Screwdriver or curly screwdriver.
- Drill with a drill with a diameter of 2 mm (the diameter of the drill must be less than the diameter of the screws).
Bench assembly diagram.
- - legs.
- - frame.
- - back support.
- - seat slats.
- - back straps.
How to make a bench with a back.
The drawings provide detailed drawings with dimensions for the manufacture of a garden bench.
Let's start making a garden bench, and start by making the legs for the bench.
Mark the cut lines on the board and saw off the blanks for the legs with a hacksaw. Smooth the ends of the legs with sandpaper.
Bench side assembly.
We attach the upper support to the front and rear legs. Align the legs with the support, drill holes and fix them with screws. Let's make two sides.
Assembly of the bench seat frame.
We saw off blanks for the seat frame. We combine the frame blanks, drill holes and screw in the screws.
Assembly of the frame and sidewalls.
Now you need to connect the sides of the bench and the seat frame.
Bench back.
We saw off 3 supports for the back.
We install and fasten the seat back supports, as shown in the figure.
Fit the slats to the seat frame, making sure you place them at the same distance, drill holes and secure the slats with screws.
Now fasten the planks to the backrest supports.
Armrest attachment.
Install the armrests on the sides of the bench, drill holes in the armrests and secure them with screws.
The screw heads can be hidden by covering them with wood putty, then let the putty dry for a few hours. Sand the hardened putty with sandpaper, and then apply several coats of paint or varnish to the bench to improve appearance benches.
How to make a bench photo.
When you visit Casino X official website for the first time, you will definitely remember this site for its unique design and a large selection of promotional offers. Experienced gamblers who know a lot about gaming software are happy to become guests of the resource. It has everything you need for a comfortable game: licensed devices, bonuses, a high level of service. This is a serious long-term project that is successfully advertised on the Internet and gives real opportunity not only hit the jackpot, but also withdraw the well-deserved winnings without any difficulties.
Virtual slot machines Casino X of any genre
All professional resources that review Casino X note its very impressive gaming range. More than 450 slots from more than 30 providers are waiting for you. The main part is the development of Netent and Microgaming. Basically, these are five-reel simulators of various genres: fantasy, history, plots from films and legends, fictional stories, sports, animals, treasures and, of course, fruity classics. For convenience, top online slots are collected in a special section. Interesting game mechanics await you:
- free spins;
- cash bonuses;
- multiplication of awards;
- Special symbols;
- accumulators and multipliers.
Get a bonus!
The web resource also focuses on desktop entertainment and the Live category. To switch to paid rates, you need to create a profile in the system. As soon as the quick registration is completed, the player can replenish the account of his account. Immediately after that, you can start playing the most popular slot machines. Most of the devices are adapted to gadgets with touch controls. On a smartphone Casino X mobile version slightly different from the format on the computer. There are no functional differences: you manage your bank and rates in the same way as on a personal computer.
Free game mode at Casino X online
The club's clients do not have to look for where to download slot machines for permanent access to demos. The browser version of the portal works around the clock, as well as its technical support. The site is occasionally updated to better meet current quality standards. All guests of Casino X can play for free without registration on one condition - connecting a smartphone, tablet or computer to the Internet. Just click on the video slot you are interested in and start a test game in demo coins. The results of such spins or bets at the roulette or poker table will not affect the real balance in any way.
Unlimited access to Casino X official website
If for some reason Casino X full version does not open at your usual address - this problem is easily solved thanks to alternative copies. For each client and ordinary guest, today the mirror serves as the most convenient way log into your account and go to the page with slot machines. The same licensed software is waiting for you with a full guarantee of specific algorithms. You will never lose your status and balance, as additional addresses with a similar interface and bonus features are constantly added to the network.
If you are thinking of building a bench in the country and want to go beyond the ordinary and create something truly unique, then you are in the right place. We have compiled for you a selection of the most original and unusual designs benches and benches that you can make with your own hands. Moreover, we will show you how the benches are made in the photo.
The most common benches are wooden. And this is not surprising! Wood is the most affordable material for building a bench. The variety of designs here is truly huge! We will give you some examples.
To create such benches, you can use the remains of the cut garden trees. both trunks and thick branches will go into business. 
Even short cuts of a wooden beam can become a unique garden bench in skillful hands.
Easy to make from quality material, even if it is a little. But even from improvised materials, such as, good garden benches are also obtained, as in this photo.
It looks like a bench can be made from any wooden structure. These are made from wooden spools of cable.
It is hard to imagine that you have unnecessary items in your household. wooden barrels in a good condition. If yes, then here is the garden bench option for you.
Funny garden bench from one log.
If you do not buy a ready-made bench, but make a bench with your own hands, then you have a chance to give it a unique look with very little effort.
Your bench does not have to be completely wooden. Here is a popular simple bench design made from building blocks and wooden blocks.
Probably, most of us would simply throw out the old unnecessary boat, but there are people among us with the ability to see beauty literally in the trash. The bench from the boat in the photo is just wonderful. It may not be very comfortable to sit in it, but you can sit in Turkish. But even looking at such a bench is nice.
Bench for the most daring.
Often beautiful benches do not differ in complex design. In this case, individuality and your personal attitude to the garden are more important.
We offer you four basic bench designs, based on which you can create your own amazing and unique benches, which are not yet in any photo.
Small wooden bench: photos and instructions.
This simple bench in the photo is made from just a few planks. These used to be often made in villages for everyday use. It is stable, and most importantly - it is easy to carry from place to place. Such a bench will serve both in the house, and in the kitchen, and in the yard. At the same time, it does not require large expenditures of materials, and it is very easy to manufacture. The most difficult thing is to make neat cuts in the boards at an angle to get the legs.
It may seem that the sides in front and behind are clean decorative element, However, it is not! It is they who give this bench rigidity and stability.
Therefore, in one form or another, they are present in the design of each such bench.
Sometimes, however, only one such stiffener is left. Then it passes in the middle under the seat.
Large wooden bench with your own hands
If you need a large bench, and you do not plan to move it from place to place often, then this option is for you. This spacious bench is perfect for both indoor and outdoor use. It is made of thick timber, so it can easily support three or four adult riders.
It's not hard to build either. First you need to make these legs.
Then the legs are fastened with longitudinal bars (two at the top and one at the bottom), and a solid massive frame is obtained.
Using such a device, you can drill holes and hide the fasteners on the inner surfaces of the bench parts so that the self-tapping screws do not spoil the look of the product. But if you don’t have one, then you can still make such a shop by attaching the parts in the usual way.
It remains only to assemble the top and attach it to the frame.
Wooden bench without a single nail
And here is an example of a very beautiful and original bench, in which there is not a single nail or self-tapping screw.
It is made very simply, although it requires some special tools. First, all elements are cut.
And then, with the help of clamps and templates, the parts are glued in a checkerboard pattern.
You will need a lot of clamps, including several large ones, so this project is only suitable for those who have an impressive set of carpentry tools.
Most often made from wood. It is understandable: this is the most accessible and “plastic” material that can play even in the hands of a beginner. The main thing is to approach wisely. Get a tool and theoretically savvy. And after a little diligence, a place for outdoor recreation will appear in the summer cottage.
Any homemade bench begins with a diagram. In the age of information, it is quite easy to find inspiration, but sometimes you have to look for the details for productive creativity. So, for a simple request " drawings of garden benches made of wood"Google gives out a lot of photos and diagrams, unfortunately, devoid of the details necessary to make these same benches yourself. And when looking for a bench layout, what is really important? Material, production process and, above all, dimensions.
So, it is chosen based on preferences: the product with back, straight or angled, wide or narrow, long or two-person only, digging in or set on the ground. Next, the material is prepared. And you can start creating.
Drawings of garden benches made of wood
This is something that can be done in one day. The idea is not new, but the drawing is the author's. The bench, made by hand according to the scheme, has been successfully fulfilling its function for a whole season in the open air.
Main drawing
Bench base
First, the side racks of the bench are assembled according to the following schemes:
Keep in mind: any drawing, even the most detailed one, is still a diagram, a sketch, from which you need to start. In the course of production, the parts will still have to be customized depending on the quality and quantity of materials, the availability of the necessary fasteners and decor options. This is a chance to let your imagination run wild and make an exclusive thing.
Another drawing of a bench with a wooden back
Drawing of a bench with a back
General assembly plan
Assembly of legs
Drawings of garden benches with a wooden back
A wooden bench for a summer residence will last longer if it is coated with a special impregnation. There are enough of such compositions on sale. Some of them protect the wood more strongly, but change its shade. Others are able to protect against UV exposure and preserve the texture of wood. Oil paints on wood perform the same functions, but cover the “wooden pattern”.
IN country house or in the country every person wants to have only high-quality and multifunctional garden furniture, which will not take up much space, and at the same time will perform maximum functions on the plot. Therefore, a transforming bench will be an excellent solution for a joint tea party with the family. Here you have both a bench and a table at the same time, and most importantly, you can make such a design with your own hands.
Bench-transformer - design description, principle of operation
This bench is for country house represents enough simple design, which can easily be transformed into a table with two comfortable benches. And when folded, it is an ordinary bench with a back and handrails. It will not take up much space on the territory personal plot and at the same time be able to perform all its functions in full.
Functions and convenience of the bench
This is a compact and practical bench that easily turns into a fairly roomy table and two comfortable benches. Due to the high degree of mobility, it can be installed anywhere in the garden.
The only drawback of such a bench is its rather big weight, since wooden planks for the manufacture of such complex design it will take a lot, but it will be quite stable, reliable and durable if everything is done correctly and accurately according to the developed instructions in compliance with all technological processes.
Preparation for the construction of the structure: project drawings with dimensions
Before you start building a bench - a transformer, you need to prepare all the materials and tools, as well as draw up good drawing or find it online.
We offer you a typical drawing - a diagram of a bench - a transformer with the dimensions indicated on it. The most difficult action is the creation of a movable mechanism, so initially it is necessary to prepare all the blanks, which will then be assembled together into a single transformation structure.
To make a bench - transformer will need to purchase planed edged boards and timber. Larch, birch, pine, beech, ash or oak are best suited for such a design (if possible, since it is very expensive).
The board must be well sanded, of high quality and meet all compliance standards. If you buy a board at a sawmill, be sure to ask about the availability of a quality certificate for their products, since under the guise edged board oak, they can sell you a completely different product, and if you are not well versed in wood, then it is best to take a carpenter with you who understands the types of boards and its quality.
Material calculation and tools
To assemble a bench - a transformer, we need:
- Two beams with a section of 90x45x1445 mm;
- Five bars with a section of 90x32x1480 mm;
- Two beams with a section of 90x45x1445 mm.
To work, we need the following tools:
Stages of making a bench-table
- The first step is to make the legs of the frame. To do this, you need to cut out 8 absolutely identical bars 70 cm long and make oblique cuts (also the same) on them at the bottom and top, so that you can get perfect balance when you further install the structure under a certain slope.
- Next, we make a frame for two benches from a polished edged high-quality board. We cut out four segments of 40 cm each and the same number of segments of 170 cm. On all boards, the corners must be cut so that then two completely identical rectangles of a slightly oblong shape can be made. For their joining, we use special prepared screws or nails. But first, we drill the same holes in the boards with a drill (the length of the boards is 1.7 meters).
- In the frame of the structure, several strong reinforcing elements must be made, which will further form a comfortable seat. For this we take wooden beam and nail it in increments of 500 mm. So we will divide the structure into sections and protect the future bench from lateral deformation.
- The legs must be screwed to the seat at a distance of 10 centimeters from all corners diagonally. We do this so that the joints are near the "seams" or a little further. Here it is very important to make the highest quality structural elements, that is, fasten them to 2 or 3 bolts that pass through the timber and the upper part of the prepared legs. It is necessary to make grooves in the beam in which we will hide the bolt heads. And under the nut, we cut off the excess with a hacksaw.
- Next, we make a rectangular element of 70x170 cm from the beam, which we connect from the inside with additional details that ensure the rigidity of the structure. In the future, we use this element for the device of the back or countertop.
- At the moment, we do not cover the frame with shields, as it will be difficult to assemble the entire mechanism into a single whole. It will also complicate the transfer of the structure.
- We combine the three resulting elements into a common system. This work is quite difficult, since it will be necessary to work with large parts of the future bench - transformer. It is best to do all the work on a flat floor or on a special large table. We make all connections movable and fasten them with hinges or ordinary bolts.
- We cut off two bars 40 cm long to fasten them between the bench and the table shield in the corners. They will be at the bottom of the shield, but on the side of the bench itself.
- We cut off two more bars 110 cm long to make the back inclined. We fasten them with screws or other fasteners at another bench, but in this case the fasteners are not placed on the near side, but in the very center. Otherwise, we will not be able to correctly connect the two benches together.
- After we assemble the entire structure, and carefully check the operation of each moving element, it will be possible to start sheathing the frame with outside. To do this, we take a well-cut edged board, but you can take a bar or chipboard (if the bench - the transformer will not constantly stand on the street). Thus, we have completed the technical stage of the work.
The bench - a transformer can be covered with a stain and then with a water-repellent varnish, which is used to paint the decks of yachts. The varnish dries about 36 hours. But still, a varnished bench is not recommended to be kept outdoors in the rain and snow.
If the design is done correctly, and you take care of it, then it will serve you for at least 20-25 years. Very often, craftsmen replace wood with metal, which does not look so beautiful and aesthetically pleasing, but the service life increases significantly.
The second version of the transformer bench made of metal profile and wood
Materials and tools for construction
A bench - a transformer made of a metal profile is made similarly to a wooden one, but only with some changes.
To make such a bench, we need:
Construction steps
- We clean all metal profiles from rust so that later it would be easy for us to work with the material - to weld pipes and paint them.
- And then, according to the drawn up drawing, we cut the blanks size to size.
- We make a seat frame. To do this, we weld the pipes as shown in the figure and, if necessary, strengthen the structure.
- In the future, this design will serve as a table, as well as the back of a bench. We also had to change the angle a bit.
- We weld another seat.
- After carrying out all welding work, we begin to drill holes and twist everything onto special furniture bolts (their length must be at least 60 mm). Then we insert washers between the iron elements of the structure so that it unfolds more easily.
- Here we see the final version of the transformer bench, where an additional strong leg was added to one of the benches and the angle and lunge of the leg in the second bench were slightly changed, since the angle of inclination was changed in the back, and it became steeper. In order for the bench not to be thrown, it was necessary to digest the structure.
- For the legs, we cut out “heels” measuring 50x50 mm from a metal sheet so that the bench is more stable and does not “sink” into the ground if it stands on soft ground.
- Depending on the size of the structure, we cut the boards and grind them well. These will be our bench seats and the surface of the table.
- As a result, we get excellent finished structure benches - transformer.
Shop decoration
Then we soak all the boards well with an antiseptic, fire retardant and let them dry. We paint with water-repellent varnish, oil or acrylic paint. We apply varnish or paint in several layers.
