Increasingly, homeowners are choosing for their external cladding a modern, high-quality and easy-to-install material - facade thermal panels. This type of lining perfectly keeps heat, which is very important in our latitudes. And externally facade thermal panels are able to give a noble respectable appearance to any building, even built in the last century.
Like many other latest building and finishing materials, these panels came to us from the West, and initially only products from German, Canadian and other companies could be found in stores. But now our country can also offer a completely competitive product, qualitatively and outwardly not different from the best Western models. In the article, we will pay attention to Russian-made thermal panels, find out their characteristics, features, advantages, and determine the prices.
Description of facade thermal panels for a Russian-made house
Front thermopanels are a facing plate representing "sandwich" from the top decorative layer and heat-insulating material. Usually, either polystyrene foam or polystyrene foam acts as the latter. mineral wool. It should be noted that the thickness of the heat-insulating gasket can vary from 30 to 100 mm, which affects the heat-saving properties of the material.
The decorative outer covering is usually brickwork from ordinary or glazed elements. The thickness of the outer layer is approximately 12 mm, thanks to which the entire plate becomes strong, reliable, and able to serve for a long time. Also now more and more expensive and solid imitation of natural stone is being used more and more often.
Thermal panels are designed for external finishing of buildings simultaneously with their thermal insulation. Thus, the material kills "two birds with one stone" at once: it decorates and warms. A very advantageous combination that allows you to save on additional thermal insulation.
Here is how it is used decorative plaster for outdoor work, and how to apply it correctly. can see
On the video - facade thermal panels:
Facade thermal panels are usually used for facing small private houses. However, this modern technological and environmentally friendly material may well be used for finishing high-rise buildings.
Types of tiles
We will find out what types of facade thermal panels are presented on the modern Russian construction market.
So, all thermal panels intended for facade cladding are divided into:
Clinker thermal panels are a combination of clinker tiles that look like brickwork and a heat-insulating polyurethane foam layer. This material is suitable for facing even wooden houses. Sometimes manufacturers try to make this product cheaper and more affordable, and therefore they replace polyurethane foam with cheap foam plastic, and clinker tiles with cement-sand tiles. However, the result is a deterioration in both thermal insulation and external indicators.
Rigid facade thermal panels are an OSB plate, on which a layer of insulation is applied, and as a finishing touch - an external decorative layer.
And here is what the facing artificial stone for the facade looks like, and how to apply it correctly. can see
In this case, the following types of materials are used to create decorative cladding:
This type of panels has a rigid base, due to which the manufacturers managed to reduce the vapor permeability of the final product by several times.
The price of rigid thermal panels, first of all, depends on the type of cladding that is used. So, clinker is the cheapest type of finish, but also less presentable, and glazed tiles and porcelain stoneware are expensive, but also more aesthetically attractive.
Both considered types enjoy well-deserved success in the building materials market, as they perfectly retain heat, and in a wonderful way transform the external facade of the building.
pros
What are the advantages of facade thermal panels compared to other types thermal insulation materials, let's find out.
As already mentioned, this material is a unique product, which is both thermal insulation and an external decorative coating. The panels retain heat very well, and therefore their use in our latitudes is highly justified.
Modern manufacturers in Russia offer such a wide range of external finishes for thermal panels that it is impossible not to choose the right one. The market offers a wide range of different colors and textures suitable for any design. It is also worth paying attention to how
Facade thermal panels made by domestic manufacturers perfectly resist the harsh climate of our country: they successfully endure both the Siberian frost and the dry southern summer.
The price of the material is quite affordable: due to the fact that there are no monopolists in this market, the buyer always has the opportunity to choose the right combination of panel quality and price.
Products are characterized by high strength, which ensures durability and resistance of the cladding to precipitation and other external influences.
Installation of facade thermal panels is quite simple. For this, it is not even necessary to invite specialists: the owner of the house himself may well carry out the installation.
The panels retain heat remarkably, thanks to which the house will have a comfortable microclimate even in the coldest winter.
Video
But what are the facade materials for exterior finish at home, and which of them are the best, you can see
Minuses
A little about the shortcomings of the material.
In order to reliably and competently carry out the installation of facade thermal panels, you must first align and prepare the walls of the house. This forced necessity sometimes takes a lot of time, takes a lot of effort.
There is a risk of "running into" low-quality products, as new "players" are constantly appearing on the building materials market, often turning out to be "one-day" ones. To avoid such a disaster, we advise you to focus on well-known manufacturers, and purchase materials in trusted stores. For example, you can quite trust our list of Russian companies - manufacturers of facade thermal panels.
Expensive cost is another disadvantage. However, once invested in quality material, you will provide your home with reliable thermal insulation for many years, and give the building an external presentable and solid appearance.
But what PVC panels look like, and how to use them correctly, you can find out from the article on
The choice of decorative coating
- Porcelain stoneware
Not afraid chemical substances, differs in fair wear resistance, is durable, is not afraid of dirt. In addition, porcelain stoneware panels are not afraid of precipitation.
Porcelain stoneware
- Ceramics
Has the same positive features, as porcelain stoneware, however, is less durable.
Ceramics
- Concrete tiles
This type of cladding is not suitable for a changeable climate, since concrete absorbs moisture too much, which is fraught with cracking of the material if drought begins immediately after precipitation. But more expensive models have a waterproof coating. But how to finish the facade of the house from aerated concrete, and what material should be used in the first place, it is indicated
- Clinker
Optimum, inexpensive, accurate and the most commonly used type of external decorative cladding for facade thermal panels.
But how it happens, and what materials are the best, you can see in the article at the link.
Manufacturers and prices
Let's give an overview of modern Russian companies offering facade thermal panels.
MFM (Workshop of facade materials), Moscow
This company offers its customers facade thermal panels with external cladding made of clinker in the form of brickwork and artificial stone. The thickness of the thermal insulation layer can vary from 3 to 10 cm. Along with the imitation of ordinary brickwork, the brand also presents such interesting types of external cladding as the German and Spanish design prototypes. In addition, the company produces a series that imitates a natural stone, which gives the dwelling a noble, solid appearance.
Workshop of Facade Materials), Moscow
Price per sq. material meter:
- tes-brick - from 1590 rubles;
- gretta - from 1800 rubles;
- canyon - from 2750 rubles.
Termosit, Railway
This company manufactures products under patents acquired in European countries. The company exercises strict control of materials, and production lines are equipped with high-precision equipment. Thanks to this professional approach, the company supplies the market with really high-quality products that are no worse than the best Western models.
Termosit, Railway
Price per sq. meter:
- cladding Falcon - from 978 rubles;
- light panel - from 1160 rubles;
- brick panel - from 1074 rubles.
FORSKA, Petersburg
In this case, the company purchases almost all of the raw materials in Western countries, so the quality of the finished product is identical to European standards. Polyurethane foam and polystyrene foam are used here as a heater, which provides products with a decent level of thermal insulation. The company offers customers, among other things, budget panels at 990 rubles per sq. m. meter.
FORSKA, Petersburg
Other prices:
- Rot bunt care - from 1550 rubles;
- Faro grau - from 1680 rubles;
- Rimini gelb - from 1850 rubles.
Regent, city of Pereslavl-Zalessky
The company buys high-quality clinker tiles from Europe and, supplementing them with polyurethane foam heat insulator, produces panels. Special modern technologies ensuring compliance with a high level of products at all stages of production.
Facade thermal panels
Price per sq. m:
- clinker tiles Stroher - from 1200 rubles;
- Feldhaus clinker tiles - from 1600 rubles;
- Roben Victoria - from 2500 rubles.
Plitprom, Skhodnya
This company is one of the leaders in this area in our country. They were one of the first to start producing facade thermal panels, which by now has brought the brand to a leading position in the market. The company is distinguished by a responsible approach to work: high-precision equipment is used in the production, which allows producing products of the highest category and quality.
Facade thermal panels Plitprom
With all this, the prices for the material do not differ much from the prices of competitors, and are quite affordable. Price per sq. m of most of the presented products - in the region of 1750 rubles. but there are also budget options - 1200 rubles each.
Foreland, Moscow
This company mainly presents panels with decorative artificial stone cladding. The view of the building finished with these panels turns out to be very representative and “rich”. And polyurethane foam is responsible for thermal insulation here.
Facade thermal panels Forland
Price per sq. m:
- panels XVII Century - from 2500 rubles;
- Euroc panels - from 2700 rubles;
- cliff panels (imitating rocky texture) - from 3500 rubles;
- Elbrus panels (imitating a mountain surface) - from 3500 rubles;
- corner options - from 2500 rubles.
We examined the features of Russian-made facade thermal panels. As you can see, products manufactured in our country are quite capable of being of high quality, reliable, and outwardly attractive. A big plus of domestic material is that it comes out lower in price: an important aspect in modern realities.
It consists in the manufacture of products that are a fairly common building material used for exterior decoration and insulation of buildings. Russian-made thermal panels from the manufacturer Release consist of several components: insulation - in the role of which foam plastic or polyurethane acts; clinker tiles or artificial stone.
Thermal panels of Russian production
Our company cooperates with a huge number of suppliers of clinker tiles and artificial stone, both Russian and foreign manufacturers. As a result, you can purchase from us more than 200 types various facade thermal panels.
Production of facade thermal panels This is the core business of our company. We offer the best prices in the market of thermal panels, and are always ready for cooperation.
The best prices from the BEST MANUFACTURER 
:
Technologies for the production of facade thermal panels
The production itself is divided into several stages:
- Preparation of raw materials;
- Formation of a thermal panel in a block form;
- The production process itself - heating in a block form, cooling with a vacuum unit;
- At the last stage, the panel should “lie down” - the stage takes NOT less than a day.
Thermal panels from the manufacturer purchased in our company, this is really the right decision! Our experts follow the entire production technology and monitor its process - as a result, you get a quality product.
Thermal panels from a manufacturer in Moscow and the region - how to choose.
Thermal panels are a fairly common material, because it is one of the most durable. The price of facade thermal panels in our company is very attractive, because we are one of the few manufacturers in Russia.
Prices in Moscow for this material are very different everywhere, but we offer Better conditions due to the presence of an equipped material and technical base in the company. Thermal panels from the manufacturer are resistant to frost and can protect your home from excess moisture.
The main advantages of thermal panels from Release-Stroy
We use only high quality and natural materials for the manufacture of our products. Our facade thermal panels can fit into any design project and budget. We have many regular customers who prefer to cooperate with us, because we offer the best conditions for cooperation.
Our key advantages:
- Own production, thanks to which we produce high-quality products at low prices;
- If necessary, you can apply for a loan or installment plan with us in 30 minutes;
- Individual colors due to the presence own production, we will be able to choose the necessary shades;
- It is beneficial to cooperate with us, because we have the best prices on the market;
- We perform turnkey work and give a full guarantee for all work done.
Production of thermal panels- a great business idea in the construction industry. This material is considered relatively new. It allows you to speed up and simplify the process of building houses and carrying out repairs in them. Due to the novelty of the idea, the entrepreneur will be able to quickly recoup his investment. Demand for this product today exceeds supply, which is also positive moment for the manufacturer. This state of the market will provide an easy search for buyers of thermal panels.
Thermal panels(heat panels) is a modern alternative to facade building materials. Such products have a long service life, have excellent thermal insulation. In Russia, the issue of heat conservation is most acute. The production of facade thermal panels can significantly reduce heating costs. It is this property that ensures the high interest of consumers in the material.
The materials used today for insulation have a lot of disadvantages. The most important is the vulnerability - external factors capable of destroying everything beneficial features such products. Therefore, the use of foam or mineral wool is accompanied by additional work to protect the material from external influences.
There is one more important point- Any owner wants his house to look beautiful. Therefore, the heaters used have to be hidden in order for the housing to be aesthetic. It turns out that in addition to the simple use of heat-insulating materials, the need to use siding and tiles is added.
The business in the production of thermal panels is popular precisely because of the absence of such difficulties in use. This building material has the following advantages:
- cost savings (the owner of the house will not have to look for additional options for insulation, the purchased thermal panels themselves will perfectly retain heat);
- aesthetic appearance (a variety of such panels allows you to choose the option that is suitable in color and shape);
- excellent sound insulation (sound waves do not pass through thermal panels, which will allow the owners to live in their home in peace and quiet);
- versatility (heat panels are used not only for insulating houses, but also for building walls, thereby performing several functions at once);
- long service life (manufacturers give a guarantee for this material for 50 years);
- ease of use;
- the possibility of carrying out work on the application of thermal panels at any time of the year (even in cold weather, the material does not lose its properties);
- ecological purity.
Thermopanels - what are they?
The production of thermal panels as a business requires the entrepreneur to study the very process of their manufacture. And this is impossible without understanding what a heat panel is, what components it has. It consists of:
- Metallic profile. This component provides high strength of the finished product. It is with the help of the profile that the thermal panel is securely attached to the facade.
- Facing. Concrete is used for its manufacture. That, in turn, is obtained by mixing cement and granite screenings. A little water is poured into them to eliminate the possibility of cracks on the surface of the cladding. This allows you to get a thermal panel that perfectly tolerates changes in temperature and humidity. The surface of the product itself can be painted in the desired color - the paint will be evenly distributed over the surface, no streaks or stains will appear.
- insulation. It is polystyrene foam with a thickness of 5-10 centimeters. Depending on the size of the insulation, the entrepreneur receives thermal panels with a different range of applications. Some of them are suitable for warming ready-made houses, some can be used to build walls.
The parts are connected to each other with high-strength adhesives. This ensures excellent quality and durability of the panels.
Varieties of thermal panels
The most popular types of thermal panels are the following:
- Clinker. This form is highly resistant to external influences - the performance is often higher than that of some varieties of natural stones. The production of clinker thermal panels is accompanied by the application of clinker tiles as a decorative layer. This variety attracts buyers with its impeccable appearance. The thermal panels themselves look very natural. Slate clay is used as the main raw material for production, which indicates the naturalness and environmental friendliness of the finished product. It does not contain any chemical additives or impurities. High strength is achieved through firing. The main properties of such panels are: high water resistance, frost resistance, thermal insulation, noise insulation, auxiliary waterproofing. This variety is used not only for the insulation of facades, but also for interior decoration, construction of fountains, pools.
- With porcelain tiles. In this case, porcelain stoneware is used for facing the panels (one of the varieties ceramic tiles obtained by firing and pressure). It is due to the pressing of the product that a high-strength building material is obtained, which is not afraid of the effects of the elements. An important feature such panels is their pronounced texture. Outwardly, the details resemble masonry - this effect is achieved thanks to large sizes products. Connoisseurs of the Scandinavian and Mediterranean style acquire just such panels. They trim company stores, large restaurants and cafes, small hotels.
- With glazed tiles. This type of thermal panels is used for insulation of low-rise residential buildings. Externally, the products resemble brickwork, which makes the facade attractive and noble.
All the types of thermal panels presented are very popular among Russians today, but who is the main consumer?
Circle of consumers
The main issue of any entrepreneur will be the search for consumers. In the case of the production of thermal panels, you need to focus on the following categories of people:
- large construction organizations;
- companies involved in repair work;
- ordinary citizens building houses for personal use;
- wholesale depots building materials.
The last thing to sell finished products is to wholesale. This will reduce the cost per unit of production, but the lost profits can be compensated by the volume of deliveries and the reduction of transportation costs.
Even a novice entrepreneur should be well aware of the technology for the production of thermal panels. The following stages of manufacturing finished products can be distinguished:
- Preparatory stage. Polystyrene granules are foamed and then dried.
- A clinker tile (or another one, depending on the type of panel) is placed in a special form. It is fixed in the block with the help of special clamps.
- After that, pre-prepared polystyrene granules are sent to the workpiece. There is an increase in temperature, due to which the width of the insulation increases, filling with itself all the free space in the form.
- The panel of the desired shape is cooled in a specialized vacuum unit.
- The cooled panel is left to ripen for another 24 hours, after which it is packed and sent to the warehouse or to the buyer.
Necessary equipment
You will also need specialized equipment for the production of thermal panels. These should be technologically advanced machines that facilitate the work of maintenance personnel. Production can be almost completely automated. Technologists will only need to monitor the correct manufacture of panels. To work, you will need the following tools:
- blowing agent;
- polystyrene ripening chamber;
- steam plant;
- special molding container;
- vacuum containers for cooling;
- pneumatic cushion;
- fans.
If the initial investment is sufficient, then you can additionally purchase your own line for the production of clinker slabs. It will consist of special molds and a kiln for firing. If there is no money for this, then you can do without your own line, buying ready-made tiles from other manufacturers. But this option will mean that the final cost of finished products will increase due to the high cost of tiles.
When looking for suitable equipment, an entrepreneur must evaluate not only the price, but also other factors. Line performance is important. A small enterprise will have enough of a mechanical line with low productivity, and it is better for large organizations to purchase an automated line that produces at least 100 pieces of heat panels in 1 shift. It is important that the supplier can not only sell, but also deliver, install, and test the equipment. The presence of a warranty period of service and free staff training will be an additional plus in favor of the seller.
Financial results
If an entrepreneur wants to produce about 100 thermal panels per day, then he will need start-up capital in the amount of 1,500,000 rubles. For work, you will need a room with an area of 120 m 2. The staff must consist of 7 people. The production profit will be about 120,000 - 130,000 rubles per month. It will be possible to recoup investments in 1-2 years. The greatest revenue can be obtained in the warm season.
If you open a large production with the number of produced panels up to 400 pieces per day, then for the purchase necessary equipment it will take about 5,000,000 rubles. It will take 2 times more premises and people. The profitability of such an enterprise can reach 400,000 rubles per month. The payback period will decrease to 1-1.5 years.
Is it worth starting a business for the production of thermal panels? The material in question is used in the construction of buildings and residential buildings. It is used in exterior work. Thermal panels consist of insulation and clinker tiles.
The business in the production of thermal panels is very profitable, because the material is in demand. It gained its popularity due to its long service life, good heat-preserving properties. All of the above makes it safe to assume that this business idea can be profitable if implemented correctly.
Thermal panels production technology:
- Clinker tiles are placed in special aluminum molds - matrices processed in advance with the desired composition. One of the main rules of this stage is compliance with the established distance standards.
- Then, to protect the polyurethane foam from ultraviolet rays, a layer of quartz sand is laid out.
- After these operations, the aluminum molds are filled with the composition of the insulation.
- Upon completion of the main stages, the thermal panel will receive its final form after cooling. To do this, it is sent for revision to the desired parameters.
Key points for the production of thermal panels
The basis of thermal panels are: insulation, metal profiles and cladding. Their features:
- Facing of thermal panels is done using the smallest volumes of water so that cracks do not appear in the facade. Thanks to this, the facade will be able to repel rather than absorb water, and will be able to survive temperature drops.
- A 5-10 cm thick expanded polystyrene plate is used as a heater for a future thermal panel. In the process of creating an element, expanded polystyrene is glued to its outer part using special compounds.
- Embedded metal profiles also play an important role in the production of thermal panels. The edges of the metal parts are serrated, and due to this they will better adhere to the building cladding. At the time of manufacturing the thermal panel, the embedded profiles are fixed inside the concrete body. They are needed to attach the element to the facade.
What equipment to choose for the production of thermal panels
V the right equipment for the production of thermal panels includes the following equipment:
- mechanisms for creating foam plastic: ripening bunkers, pseudo-foamers, etc.;
- steam generator, vacuum unit, block molds;
- secondary devices (airbag, fan, etc.).
Also, for the manufacture of thermal panels, you will need clinker tiles. There are 2 options here: either purchase equipment for production and create consumables on your own, or purchase raw materials from suppliers.
There is an opinion that there are few enterprises in the Russian markets that supply equipment for the production of thermal panels, but this is not so. The modern assortment of goods is large, and everyone can choose for themselves suitable option, which will suit him both in terms of price and performance.
So that the manufacture of thermal panels does not eventually drive the owner into debt, but brings good profit and works with double efficiency, it is necessary to carefully consider the selection of premises, equipment and consumables. An integral part, which includes the production of thermal panels, are Consumables such as bushings for fastening, anti-adhesive lubricant, quartz sand.
How much money do you need to start a business for the production of thermal panels
One of the main features of a business is that you need to invest money in it. The production of thermal panels is not considered an exception among a huge number of business ideas. Fixed assets in this production are spent on rent or purchase of premises and equipment. In addition, you may want to save money, and instead of producing clinker tiles choice will fall to purchase from suppliers. In this case, the company will be able to save at first, but in the future, if the business "goes uphill", then you still have to buy the necessary equipment.
In order to establish a streaming production of thermal panels, in which 360 elements will be manufactured in one shift, some funds will have to be spent on the purchase of equipment, the rental of premises and equipment for production needs, and in addition, on stocks of raw materials. The amount will be about 5 million rubles (if you count together with the equipment for creating clinker tiles).
Setting up a production facility of this magnitude (360 panels per shift) would require an area of 250 m². Profitability on average per year is often 20%. The finances invested in the production of thermal panels according to this plan usually pay for themselves in 9-18 months. Personnel for such production will also be required. For the production of 360 panels per shift, 14 people are needed.
Production doesn't have to be that expensive, but if you invest less, it will pay off much later. In the production of thermal panels on a smaller scale, the efficiency of which will be measured by 100 panels per shift, the costs will reach approximately 1.4 million rubles (excluding equipment for creating clinker tiles).
An industrial plant with an efficiency of approximately 90 panels per shift will require a floor area of at least 100 m². You will also need to hire staff in the amount of 9-10 people. The average annual profitability of such production is 17-18%, and financial investments will pay off much later than the previous version - in a period of 12 to 24 months.
Is it profitable?
Trying to open your own business is always a risk, because you can incur losses. How big is this chance in the project for the production of thermal panels? These designs, as it was written earlier, are accelerating their pace in winning first places among building materials. This circumstance increases the chances of success, but if something becomes popular and profitable, then this idea is picked up by many, creating competition in the niche. Therefore, you need to stay ahead of your competitors.
In the best case, and with serious investments, the business for the production of thermal panels will pay off in about 9 months. While not all places are occupied in the market and thermal panels have not become the most popular material, perhaps it is worth occupying this niche?
How much can you earn
This line of business is mostly seasonal, and therefore its profitability is in the range of 15 to 20%. With a properly established production and sales market, the net annual profit can reach 1 - 1.5 million rubles. Thus, the average return on investment is one and a half to two years.
What OKVED must be specified for the production of thermal panels
When submitting an application, you will need to indicate the code according to OKVED. To do this, we turn to section "C", which includes different kinds processing industry. Here, code 23.61 is suitable for the production of thermal panels - the manufacture of various concrete products that are intended for use in the construction industry.
What documents are needed to open
If it is initially planned to sell thermal panels to large construction companies, it is necessary to register a legal entity. In order to reduce the tax burden the best option registration of a limited liability company. You can register as an individual entrepreneur, but the first option provides more options. The registration authority will need to prepare and submit:
- application of the established form and decision of the meeting of shareholders on the establishment of a limited liability company;
- information about the address of the legal entity (in most cases it indicates the address of the production facilities) and the Charter;
- information about the director of the company and the chief accountant.
In addition, you will need to register with government bodies and open a bank account.
What taxation system to choose for the production of thermal panels
Among several systems for which it will be necessary to pay tax, we dwell on the simplified one, it is available for limited liability companies. This system of taxation provides a choice of two options for paying taxes:
- you can pay a tax of 15% of the net profit received. But here it will be necessary to provide relevant documents that confirm the costs incurred by the company in the manufacture of products.
- 6% income tax. In this case, you do not need to provide any supporting documents on expenses.
Do I need permission to open
For the production of thermal panels, in addition to the certificate of registration of the LLC, it will be necessary to apply for permission to the sanitary and epidemiological station and the fire inspection.
Rising energy prices forced residents of the northern latitudes to insulate their homes, but since thermal panels for facades had not yet been created, they traditionally insulated houses in several stages: frame, insulation, vapor barrier, finishing with moisture-resistant decorative materials.
A real revolution was the idea of combining polymer insulation with long-known facade tiles, which were used to line the walls, imitating noble brickwork or raw wild stone of ancient castles. Innovative façade thermal panels have become one of the most sought-after insulation products, thanks to a well-thought-out configuration and tongue/groove locking, which simplifies the connection of modules into a waterproof monolithic sheet of luxurious design.
In our country, quite recently, the price for thermal panels for exterior decoration was too high, they were not widely used, but when branches of European companies and Russian production began to open, this material became more affordable. Today on the market there are thermal panels of different price category, which depends on the material of the insulation:
polyurethane foam (PPU);
extruded polystyrene foam (EPS);
polystyrene foam (polystyrene) (PPS).
- double firing clinker;
- ceramic with glaze;
- porcelain stoneware;
- cement-sand for brick and wild stone.
The most expensive option includes finishing with clinker thermal panels, the price of which depends not only on the unique tile, but also on the reinforcing base made of glass-magnesite plates. Due to the rigid three-layer construction, the panels are easily and securely fastened to the crate or directly to the wall.
Our catalog contains many collections of the middle price category, you can verify this by going to the TD MES thermal panels online store. In addition, any client can learn about our services and get advice by contacting specialists:And the cheapest thermal panels are made of standard expanded polystyrene decorated with cement-sand castings that imitate wild stone.
Types and differences of thermal panels for the facade
All presented on modern market thermal panels for the facade are made of polymer insulation with decorative tiles, but using different technologies. In order for the products to be aesthetic and serve for decades, their production is possible only at high-tech enterprises equipped with special molding machines. For each type of thermal panels, a heater is produced from a certain raw material that affects performance characteristics products.
1. Expensive, but the highest quality facade thermal panels are obtained from dense polyurethane foam, with which the facing tiles adhere inextricably. Ready product has the lowest thermal conductivity among similar heaters, which is 0.02 W / mK. Allocates polyurethane foam thermal panel water resistance, high tensile and fracture strength, resistance to mechanical and chemical influences, and the cellular structure contributes to effective sound insulation.
2. Thermal panels for the house made of extruded polystyrene foam, obtained by a special technology of melting and molding, have proven themselves to be excellent. The obtained XPS has a cellular structure, high density and thermal conductivity close to polyurethane foam, which varies between 0.028-0.032 W/mK. V front surface insulation with a thickness of 40 to 70 mm, a water-repellent decorative tiles, and for easy installation, fixing plastic bushings are pressed into the panel.
3. The most available thermal panels with tiles are made of expanded polystyrene with the addition of a flame retardant, which is produced by steam pressure molding. Under the influence of hot steam, large granules filled with air are formed, so that the sheet itself consists of only 2% polymer. This structure contributes to low thermal conductivity at the level of 0.04 W / mK, provides air circulation and increases sound insulation.
Trading House MES operates on the market finishing materials For more than 8 years, our catalog contains thermal panels for facades made in Russia with facing tiles from Germany, Poland, China and Belarus. The products of the Belan company from Belarus, which has its own chemical and ceramic production, are in great demand. In the TD catalog you can find thermal panels for the house, lined with cement-sand tiles, but our experts say that although the CPP serves a little less, it is no worse in quality and appearance than thermal panels with more expensive ceramics.
Therefore, inexperienced customers need to purchase materials from trusted suppliers working with well-known manufacturers.And most importantly, do not buy a low-quality thermal panel, which, unfortunately, is common!
Advantages of thermal panels for exterior decoration of the house
Ceramic and clinker thermal panels for the facade have a number of advantages over other finishing materials:
reduce heat loss by an order of magnitude and increase the energy efficiency of the house;
are lightweight and do not require additional foundation work;
with medium mechanical strength, withstand bending and tensile stress up to 550 kPa;
low-flammable G1, and thermal panels belonging to category B2 of fire hazard, ignite only with an open fire, but do not support it;
withstand sudden temperature changes from +40 to -50 degrees;
not subject to fungus, mold, rotting processes;
protect walls from atmospheric influences, UV - radiation;
serve from 20 to 50 years, depending on the type of insulation and the level of care.
In our Trading House, you can purchase facade thermal panels for exterior decoration of the house, and complete them with insulation parts of various configurations:
ordinary (full-format and half);
corner elements (external and internal);
elements for the design of slopes of windows and doors;
lintels for window and door openings.
We have been working on the market for more than 8 years, we sell and install products that are directly supplied from manufacturing plants with a minimum margin. Due to the minimum margins, our bonuses and discounts, the cost of clinker facade thermal panels per m 2 is as affordable as possible.
Our specialists go out for measurements, select the most harmonious thermal panels for a house made of wood, brick, wall blocks, and perform installation, directly facing the walls or on a pre-installed crate.All these years we have been providing order delivery services throughout Russia by our own transport or through delivery services to the specified address.
By the phone numbers listed on the site, you can consult with TD specialists, get comprehensive information about the properties and characteristics of materials, as well as order a free visit of the measurer.
