Device for a drill for cutting metal. Universal scissors for metal - nozzle on a cricket drill

In this article we will talk about the nozzle for cutting metal on a drill and screwdriver - "Cricket", presented on Aliexpress.

Often, for a power tool, you have to buy additional nozzles for specific jobs, or simply to replace the old ones. One of these is a nozzle for screwdrivers, drills and hammers. "Cricket". You can buy this device at Aliexpress at low price.

Nozzle for a drill, screwdriver "Cricket" on Aliexpress: catalog, photo

Nozzle for a drill, screwdriver "Cricket" on Aliexpress

A small nozzle with a name "Cricket" Designed for installation on power tools - screwdrivers, drills, perforators. It is able to cut sheet metal, which allows you to expand the functionality of the tool and perform more operations than usual.

For manufacturing, tool steel is used, which provides the tool with a high level of strength, and also makes it possible to work with most known materials. What's more, the carefully planned design ensures low noise levels.

At the main device where it is installed "Cricket", power must be at least 0.4 kW. This value allows you to effectively cut metal without bending the metal edge. It is worth noting that many household tools, such as a drill and a hammer drill, as well as a screwdriver, have such power.

The length of the fixture is 180 mm, which allows not only to carry out work in workshops, but also in confined spaces. The power sensing mechanism is based on a six-faced shaft, which has excellent traction and high strength compared to simple round shafts.

Thanks to the use of high-quality steel for the manufacture nozzle "Cricket" capable of cutting even thick metal sheets. For stainless steel, this figure is 1 mm, and for soft alloys - 1.6 mm. If we talk about aluminum, then the thickness can reach 2 mm. The nozzle makes it possible to do even round holes with a diameter of 11 mm or more. The features of the device also include a small width of the cut track - it has a size of only 1.6 mm. Thus, significant metal savings are achieved, which cannot be achieved with the use of hand tools.

Nozzle for drill, screwdriver "Cricket" on Aliexpress: discounts, sales, free shipping

Every day you can benefit from the site thanks to the following sales -, "Deals of the Day at the Mall", and . There are other promotions as well. You can find out which of them is currently being held or is to be done on the main page of the site in a special block:

It is worth mentioning the possibility of free shipping. To find such products, in the catalog, under the search bar, select the appropriate filter:

Free shipping with Aliexpress

Nozzle for drill, screwdriver "Cricket" on Aliexpress: the best sellers and stores

Aliexpress is a huge online marketplace with thousands of sellers. Unfortunately, not all of them work honestly. Although the administration is actively fighting scammers, there is still a risk of receiving low-quality goods or even being left without them. Therefore, it is worth learning how to choose stores to buy. We talked about how this is done in the article.

With a wide range of drill bits to choose from, this versatile tool can replace many other tools. So, for example, grinding discs eliminate the need to purchase grinder, and a nozzle for tightening screws and self-tapping screws will replace a screwdriver.

With these tools, you can do the following:

grinding;
polishing;
cutting;
mixing;
twisting;
drilling holes of different diameters;
milling.

When used correctly, the result will be of the same quality as if the work was done with a special single-purpose tool. you can’t do without a drill with different nozzles at, a pigsty, cages for rabbits and other outbuildings in the country.

Types of nozzles

All nozzles for drills are divided by purpose:

stops;
for drilling holes, crowns;
cutting, nozzle-scissors "Steel beaver" and "Cricket";
for drilling at an angle;
polishing and grinding;
cutters for wood and metal;
removable;
sharpening.

Parallel stop is used to adjust the immersion depth of the drill, there are also special drilling stands for the bottom of a secure tool holder. In addition to the standard drilling function, blind holes can be made with a drill, for example, for installing hinges in wooden furniture. In this case, a Forstner drill is used. The base of the hole is flat, and its edges are absolutely smooth. Or they use feather drills instead.

Cutting attachments

Unlike a grinder, drill bits for cutting metals work more delicately and do not deform the coating of the material being processed. The tool is driven by the chuck of the tool on which it is installed.

For cutting metals, you should choose drill models with a speed of at least 2800 rpm.

Benefits of cutting attachments:

even cut;
comfortable work;
easy to use and maintain, no adjustment required.

The nozzle on the drill "Cricket" is nibblers with two cutting heads. They are used for cutting thin sheet metal: profile metal sheets, metal tiles, profiled or sheet plastic, as well as polycarbonate. "Cricket" is simply irreplaceable when erecting on a site.

"Cricket" is used for sheets of materials with the following parameters:

the thickness of sheet steel should not be more than 1.5 mm;
stainless steel up to 1.2 mm;
aluminum, copper and plastic no more than 2 mm.

The cut after processing this nozzle always remains smooth, without notches, and the coating is intact.

To make a high-quality and even internal cut, you must first drill a hole.

The nozzle matrix rotates, thanks to which it can work with both horizontal and vertical surfaces. The recommended number of revolutions of the tool to use this tool is 3000 rpm, the minimum is 1500 rpm.

Also, for cutting profiled sheet metal and tiles, the Steel Beaver scissor attachment is used.

The principle of operation is similar to the previous nozzle, the cut occurs due to the frequent reciprocating movements of the punch, which bends the material and breaks it against the matrix. This tool can make curved and straight cuts. The minimum cutting radius is 1.2 cm. You can work with it at any angle (360 °). Compared to the Cricket, the equipment is able to cut a steel sheet of greater thickness - 1.8 mm. The main advantage of the nozzle is a smooth cut, and due to the absence of sparks, the protective coating of the material does not deform during operation.

At the end of work, you should carefully handle the sheet material, since the cut edge after processing becomes sharp.

Attachments for grinding and polishing

With the help of nozzles on a drill for grinding and polishing, you can carry out the following types of work:

metal polishing, wood flooring, as well as glass surfaces;
grinding of metal, details from it and other materials;
removal of corrosion, scale, chipping and old coatings;
glass edge grinding.

Compared to special tools, these devices have a low price, and can cope with a large number of different tasks, making any surface perfectly flat and smooth. In addition, they can process hard-to-reach places where it is impossible to use other tools. But due to not large sizes it is difficult for them to carry out a large amount of work.

When purchasing a nozzle for a drill for processing wood or other material, you should carefully study the instructions. Since for different types snap-ins require different power and the number of revolutions of the tool.

All polishing and grinding attachments are a rod on which grinding material is fixed, such as foam rubber, felt, brushes or sandpaper.

The following types are produced:

plate;
disk;
fan;
drum;
end;
cup.

Polishing devices are divided not only by the type of construction, but also by the degree of hardness: hard, soft, super soft, embossed.

Cup

A cup attachment for a drill for grinding wood or other coatings consists of a rod for fixing in a cartridge, and a cup-shaped body filled with hard or light bristles. Most often it is used to remove corrosion or old coatings. Models with a soft polishing part are also available: foam rubber, felt or other similar material. The body is made of durable and lightweight plastic or metal. Soft nozzles on a drill are most often used for car polishing.

Disc and platter

Disc devices, like cup ones, consist of a rod, a body and a grinding material. The main difference from the previous model is the direction of the bristles (steel wire, brass brush), it is directed from the center to the edges of the disc. You need to use them carefully, as you can quickly ruin the coating.

Plate attachments for polishing or grinding drills are made according to the same principle as for grinding devices. But instead of a thread, they are equipped with a movable or fixed rod for fixing in the cartridge. Sandpaper is attached to them with Velcro.

Experts recommend purchasing plate nozzles with a moving rod, rubber or with a soft and thick layer between Velcro and the base. Since then you can adjust the angle of the drill and smoothly follow the contours of the material.

When working with a rigid cymbal, it is more difficult to control, and even with a slight tilt, it will make a noticeable indentation in the surface. As a result, you can completely spoil the material. Therefore, they are recommended to be used only with a firmly fixed instrument on the stand.

Fan (petal), drum and end

Grinding fan nozzles for a drill are a small disk in the center, to the edges of which petals of sandpaper or other abrasive material are fixed. It is convenient to handle hard-to-reach places, internal cavities or grind holes with such a device, as it is able to take any shape. They are fixed in the drill chuck in the same way as previous models, using a rod.

Drums are made in the form of a cylinder with a rod, covered on the outside with sandpaper. Unlike a poppet attachment on a drill, the processing surface is parallel to the chuck, and not perpendicular. They process wood, metal, glass. Most often used for sharpening the end of glass. They are soft and hard, depending on the purpose of the appointment.

The end ones are a rod, at the end of which the processing material is fixed in the form of a circle or cone. Nozzles work on the principle of a file. Using them, you can increase the diameter of the hole, as well as remove notches and make the edges smooth.

Other nozzles

An angled drill attachment allows you to make holes in places where it is impossible to work normally. The angle can be adjusted or be fixed - 90 °. Drill bits are used for drilling in wood, concrete, ceramic and tiles, metal and other materials of large holes. They are made of high quality steel so that the holes are smooth, without chips and cracks.

The nozzle for sharpening drills is a body with a leash and a grindstone inside. The holes for sharpening have different diameters. Their number can reach 15 pieces. Mixer attachments are used for mixing various mortars, paints and other mixtures. Selected depending on the consistency. There is also a special nozzle for tightening self-tapping screws or screws, but it should be purchased for drills equipped with a speed reduction function.

For bird owners, a pen-removable attachment for a drill for plucking birds has been developed. It instantly and safely removes all feathers from the carcass. In this case, the skin and meat are not damaged. Before work, it is not necessary to pre-scald the carcass or process it after plucking with a blowtorch.

The nozzle on the drill for plucking birds is easy to use, you just need to fasten the tool with high quality and bring the bird to it. It is made from easily washed materials and takes up very little space.

For those who work with wood material, nozzles cutters of different types are issued. They allow you to make grooves of various shapes, machine holes or remove defects. They are pointed and backed.

Before working with any nozzles, you should check the reliability of their fastening in the chuck and the material being processed. The drill must be held with both hands. Be sure to use protective equipment (gloves, goggles) while working.

Homemade nozzles for a drill - video

The need to cut products made of metal arises in many situations related to construction and repair work. To perform this technological operation, special equipment is used. various types, but if it is not at hand, a drill attachment for cutting metal can help. Using such nozzles and a hand-held electric drill, it is possible to perform effective cutting of products of small thickness made of various metals.

Types of metal cutting equipment

You can cut a metal sheet or a more massive metal product using various equipment.

Angle grinder

This device is also known as the "Bulgarian". It can be used to cut rebar, plate metal and other types of metal products. This is the most popular equipment used for such purposes.

Circular saw for metal

Such a saw allows you to make cuts at different angles and perform them with great accuracy. Meanwhile, when using this equipment, the resulting cuts have a limited depth and a large amount of waste is generated.

Guillotine

This is a high-performance metal cutting equipment, with the help of which workpieces of a simple configuration are processed.

Band saw and jigsaw

Such equipment allows you to perform cuts at different angles. Like a jigsaw, and band saw because of their design features impose significant restrictions on the size of products that must be cut.

Hydraulic equipment

This type of equipment is innovative. It allows cutting metal with high precision, while the thickness of the workpiece can reach up to 20–30 cm. The most significant disadvantage of this cutting method, in which the product is not subjected to thermal action, is its high cost.

As mentioned above, you can also use drill bits for cutting metal products, which are on modern market presented in a wide variety.

Features of the use of nozzles on a drill

Nozzles, with the help of which an ordinary electric drill turns into a device for cutting metal, in fact, are a punch (cotter pin). Making numerous reciprocating movements in the internal cavity of the matrix, such a punch pierces a metal sheet, forming a cut line on it, the width of which is 3.1 mm. When using nozzles, a point effect is exerted on the processing area, due to which the protective layers on the surface of the metal product fully retain all their functions.

With the help of a drill attachment, you can cut metal sheets of the following thickness:

made of aluminum - up to two millimeters;
made of copper, brass, sheet iron, zinc and galvanized steel - up to one and a half millimeters;
made of stainless steel - up to eight tenths of a millimeter.

The reciprocating movement of the punch, which is the main working body of the nozzle, is reported due to the rotation of the chuck of an electric drill. It should be borne in mind that such a nozzle can effectively cut a metal sheet only if it is used in conjunction with an electric drill, the chuck of which rotates at a frequency of at least 2700 rpm.

Benefits of using drill bits

Drill nozzles, when compared with such a popular metal cutting tool as a grinder, have a number of advantages.

The cut is of high quality.
When using a drill attachment for cutting metal, there is no need to purchase additional consumables, which significantly saves money.
The use of such a nozzle ensures high productivity of the cutting process.
Drill bits are highly versatile.
Due to the fact that this tool is equipped with a special handle, the cutting process with its help is very convenient.
These attachments are suitable for both electric and pneumatic drills.
The convenience of these nozzles is undeniable both in use and in maintenance.
With the help of such tools, cuts of almost any configuration can be made.

Despite the simplicity of the design of such nozzles, their use requires certain skills and dexterity from the user.

Popular models and their applications

Modern models of nozzles for drills allow cutting sheet metal not only in a straight line. With this handy and easy-to-use device, you can also make curly cuts, which is often required when installing roof structures, ventilation ducts, as well as gutters and other elements of the drainage system.

Using such nozzles on a drill, cuts can be made in almost any spatial position. An equally important advantage of these nozzles is that they do not require pre-configuration.

Among the most popular models of nozzles for drills for cutting metal, presented on the domestic market, the following stand out:

"Cricket" (from the company "Enkor");
Sparky NP 1.8L;
EDMA NIBBLEX;
ACCO YT-160A.

The differences between the models of nozzles for drills are not in the principle of their operation, but in the maximum thickness of the metal being cut and a number of others. specifications. Modern models of nozzles for drills allow you to get smooth and accurate cuts with sharp, even and uncluttered edges. At the same time, the protective coating applied to the surface of the metal sheet is not damaged and fully retains all its functions.

"Cricket"

One of the popular attachments for a drill, which is a compact nibbling (cutting) scissors, is a device called the Cricket. This nozzle, which allows you to get a smooth and accurate cut, can be used for cutting both flat and profiled metal sheets.

Nozzle-scissors "Cricket" is designed to operate from a pneumatic or electric drill (screwdriver) with a power of at least 420 W

With the help of the “Cricket” scissors attachment, it is possible to cut not only a metal sheet, but thin-sheet products made of polycarbonate and other polymeric materials. The thickness of products that can be cut with this compact nibbler can be up to:

1.5 mm - for steel sheet material;
1.2 mm - for stainless steel;
2 mm - for copper and aluminum, as well as polymeric materials.

Using the Cricket drill attachment, you can cut sheet material in horizontal and vertical planes, as well as perform internal cuts on the sheet surface.

It should be borne in mind that in the place of the sheet from where the internal cut will be made, it is necessary to pre-drill a hole.

"Cricket" is a good nozzle for a drill for cutting metal tiles and corrugated board. When using this device for cutting metal, the surface of these materials is not deformed, and the cut itself is smooth and accurate. The Cricket nozzle can easily cope with such challenging tasks like artistic cutting and creating in sheet material large diameter holes.

"Steel Beaver"

Another popular drill attachment that can be used to cut metal is the Steel Beaver. The principle by which such nozzles work on a drill is similar to how punching scissors function. When using this device, sparks are not formed in the cutting zone and there is no thermal effect on the metal sheet, respectively, the protective coating that is applied to it is not burned.

Or a hacksaw is not available, then you can use an electric drill with a special nozzle for this purpose. Such devices allow you to separate a piece of sheet steel, and some models allow you to work with a metal profile.

These devices have not only a large number of advantages, but also limitations, the main of which is the thickness of the material with which you can work.

The use of such equipment can be not only in the absence of an alternative way to process the material, but also in the case when heating the metal sheet is undesirable.

Among the main advantages of using a nozzle on a drill, before using a grinder, the following can be distinguished:

Better cut surface quality.
The device allows you to make a hole in the metal of any shape.
Significant savings Money, due to the lack of spending on consumables.
The tool is very easy to use.
Many nozzles allow you to work with both metals and plastic sheets of appropriate thickness.
When using a drill equipped with a rechargeable battery, it can be carried out in places where it is not possible to connect to a home electrical network voltage 220 V.
The ability to combine several functions in one device at once. If there is no need to cut thicker metal, then a drill can be used to drill holes and to cut the metal sheet.
Light weight fixture.

The main advantages of this product over other types of metal cutting are listed. Models of such nozzles can differ significantly in many respects, including cost.

Scissors

The scissors attachment for a metal cutting drill is a device that converts the rotation of the drill chuck into reciprocating movements, which, thanks to a special matrix, knock out a 3.1 mm thick strip in the metal.

With this method of separation, the cut is even and of high quality, which allows you to almost completely abandon the additional processing of the material in the future.

With a kind of scissors, you can cut metal, the thickness of which is not more than:

2 mm - when processing aluminum.
0.8 mm - if you need to cut stainless steel.
1.5 mm - for processing copper and brass.

This attachment for a drill for cutting metal will allow you to separate the material only if the electric motor of the tool develops at least 2700 rpm.

"Cricket"

The nozzle "Cricket" is a universal device with which you can perform the separation of not only metal, but also various plastics. The advantage of this tool is the ability to cut both sheet and profile material.

Thanks to the use of two cutting heads, the cut is perfectly even and does not require additional processing after cutting is completed.

With this type of device, it is possible to process material of the following thickness:

Aluminum - up to 2 mm.
Steel - up to 1.5 mm.
Plastic - up to 2 mm.
Stainless steel - up to 1.2 mm.

In order for the structure to last as long as possible, and the cut of metal or other material to be as even as possible, the manufacturer recommends using this device with a drill engine speed of 1500 to 3000 rpm.

"Beaver"

The nozzle "Beaver" works on the same principle as the above models. With it, you can perform both straight cuts and curved cuts with a minimum radius of 1.2 cm.

The beaver has little the best performance for cutting sheet metal, for example:

Steel - up to 1.8 mm.
Stainless steel - up to 1.3 mm.
Aluminum - up to 2 mm.

Price of popular devices

Quality tools are not cheap. For cutting metal, fixtures must be made of a material that is not deformed when subjected to constant loads. Among the variety of both domestic and foreign manufacturers, the products of the following brands should be distinguished:

1. Nozzle - NP 1.8 SPARKY 181874 - the device is made in Bulgaria and is of high quality and reasonable price.

The device allows both linear and radial cuts, while the quality of the edge will be the highest regardless of the type of material to be separated. SPARKY 181874 can be used as a drill attachment for cutting metal tiles, which will significantly speed up the process of roofing.

The price on the Russian market is about 2,000 rubles, but this cost is fully justified, since the attachment for the SPARKY drill is a high-quality product that will last a long time.

2. ENKOR 14209 - Cricket-type stray, Russian production.

The device allows you to perform high-quality cutting of sheet aluminum up to 2 mm thick. Indispensable when working with roofing metal materials, since, unlike grinders, it does not heat the metal.

The thing can be purchased for 1900 rubles in any specialized store.

3. "Steel beaver" - made in Russia and allows you to work with various metals.

With the Steel Beaver, you can easily cut off a piece of aluminum, while the edges will be completely intact. The restriction on the maximum thickness of the metal, in this case, is 2 mm.

The device can also be used for cutting stainless steel. In this case, in order not to overload the tool, it is not recommended to use a sheet with a thickness of more than 1.2 mm. The cost of the stray is about 1600 rubles.

4. EDMA NIBBLEX - perfectly copes with the separation of sheet and profile material up to 1.2 mm thick. Aluminum sheet can be processed up to 1.5mm thick.

For the effective operation of the nozzle, the manufacturer recommended the optimal drill speed of 3,000 rpm.

The estimated cost of EDMA NIBBLEX in the Russian market is 5,000 rubles. The high quality of the device is confirmed by numerous tests both by professional craftsmen and ordinary people who purchase the device for home use.

5. Malco turboShear TS1 - can be used with a drill and for installation on a screwdriver.

The device is the most expensive of professional devices and will cost the Russian buyer 7,000 rubles. The nozzle is worth that kind of money, as it is made in the USA, where product quality control is much higher than in China.

If it is used for cutting for the first time, it is recommended that before starting the main work, make several cuts on unnecessary metal fragments in order to understand the basic principle of the device and avoid mistakes in the future.
When working with a metal cutting device, in order to obtain an even cut of the desired shape, it is recommended to hold the drill with both hands during operation.
Nozzles for Russian-made drills are practically not inferior in quality to foreign counterparts, while the price may differ significantly downwards.
It is not recommended to purchase devices from your hands, you can buy defective goods for a lot of money.
Tools should be stored in rooms where the possibility of metal oxidation due to high humidity will be excluded.

5,00

When performing construction or repair work, it often becomes necessary to cut a metal blank. To do this, use special equipment in the form of a cutter, grinder or. However, it is not always available. You can cope with the task with the help of a nozzle on a drill for cutting metal, which will cut products of small thickness.

Many craftsmen are accustomed to using a drill for its intended purpose, namely for drilling holes. But not everyone knows that this tool can be turned into a multifunctional device, supplementing it with special nozzles, fixtures and stands, which will make the drill universal and indispensable in any job.

With the help of special nozzles for a drill, which can be bought at any specialized store for affordable price, can carry out drilling of holes of various diameters, cutting, grinding, polishing, twisting, mixing and milling. There is also a pump attachment for a drill, designed to pump fluid. The attachment for plucking chickens is simply indispensable in household. With the correct and competent use of additional attachments, the result will not be of the worst quality, as with the use of a special single-purpose device, but the cost of such a universal tool will be several times lower.

By purpose, all existing nozzles are divided into:

equipment for drilling holes and crowns;
scissors for cutting metal;
stops;
corner fixtures;
grinding and polishing nozzles;
equipment for milling wood and metal;
sharpening devices;
transfer nozzles.

When working with any nozzle on a drill, you must follow the safety rules:

the equipment must be securely fixed in the tool chuck;
the drill must be held with two hands, which is especially important for powerful models;
constantly adjust the pressure of the tool;
work in personal protective equipment;
after completion of work, do not touch the drill for several minutes to avoid burns.

What are drill bits for metal cutting?

Equipped with a special nozzle for cutting metal conventional drill turns into a punch or cotter pin. Device punches metal product due to the implementation of numerous reciprocating movements along the internal cavity of the matrix. As a result, an even cut line 3.1 mm wide is formed with the protective layer on the surface of the metal sheet preserved.

Important! The maximum efficiency of the nozzle is achieved only when used in conjunction with an electric drill, the chuck rotation speed of which is at least 2700 rpm.

The metal nozzle on the drill can handle the cutting of such metal products:

aluminum, up to 2 mm thick;
made of brass, copper, zinc, galvanized steel and sheet iron, up to 1.5 mm thick;
made of stainless steel, up to 0.8 mm thick.

Using a drill bit for metal cutting has a number of advantages:

the cut is of high quality;
no need to keep buying Supplies which saves money.
provides high productivity when cutting metal;
versatility of the device;
the equipment is convenient and easy to use and maintain;
the nozzle can be used for electric and pneumatic drills;
with the help of a nozzle it is possible to carry out cuts of any configuration.

Despite all the advantages listed above, in order to get a high-quality cut, some skills and dexterity are required to work.

Popular nozzle models

Today there are a large number various models nozzles for a drill, thanks to which you can not only cut metal in a straight line, but also make curly cuts. This is necessary when installing ventilation ducts, roof structures, gutters. Using the nozzle allows you to cut in any spatial position without making any preliminary adjustments.

Nozzle types:

cutting nozzle "Steel beaver" is used for cutting metal tiles, corrugated board and any flat profile sheets;
universal nozzle "Cricket" is used for cutting profile metal, polycarbonate and plastic;
special nozzles for curly and curved cuts are represented by the EDMA Nibbek, ACRO YT-160 A, Sparky NP 1.8 L models, which differ in the thickness of the processed sheet.

Nozzle-scissors on a drill"Steel Beaver"

The classic drill attachment for cutting metal tiles and any flat sheets of metal in the form of a freely rotating shaft in a bearing with a fixed eccentric works on the principle of a crank mechanism with the difference that energy is supplied here for rotation.

A full-fledged cutting tool has a supporting part located on the bed, and a movable part connected to an eccentric. It is the movable part that performs reciprocating movements during the rotation of the shaft. A mandatory element of the design is the handle, which is fixed perpendicular to the axis of rotation of the spindle. During the increase in load, a reactive torque occurs, due to which the drill advances relative to the nozzle.

It should be remembered that the tool must be placed strictly vertically relative to the workpiece when making a cut. Failure to do so may result in damage to the product and injury to the operator.

The device resembles metal scissors. The drill attachment is used for cutting flat products or profiled sheets with large radius bends. The cutting line is easily controlled. When the tool is running protective layer coating is not burned, which eliminates the formation of sparks and the likelihood of burrs. You can perform continuous cutting of products of any length. You can buy a drill attachment for cutting metal tiles and flat metal sheets for 1600 rubles.

Using the “Steel Beaver” nozzle for a drill, you can make a figured cutout for mounting roof ventilation elements or a gutter

Sheet cutting is performed at a drill speed of 1500-3000 rpm. The cutting angle is 360 degrees, the minimum radius is 12 mm. With the help of the “Steel Beaver” nozzle, you can cut:

copper or aluminum sheet 2 mm thick;
steel - no more than 1.8 mm;
stainless steel - up to 1.2 mm,

Useful advice! For cutting a profiled sheet with bends of small diameter, use cutting shears of the Cricket type.

Nozzle on the drill "Cricket"

Nibblers "Cricket" got its name due to the characteristic noise during operation of the device. The nozzle is similar to the previous model, but has a different design of the working element, consisting of two cutting heads. The principle of operation of the nozzle "Cricket" is similar to an office hole punch. Accurate holes are squeezed out in the metal during oscillatory movements of the cylindrical striker with a high frequency. Thanks to translational movements along the marked line, it is possible to obtain an even cut.

Nozzle-scissors "Cricket" are used for cutting metal thin and profile sheets, and polymeric thin-sheet products up to 2 mm thick. Work can be performed in the horizontal and vertical plane. Due to the ability of the tool to rotate 360 degrees. you can drill large round holes and make artistic cuts. You can buy a nozzle for a drill for cutting metal "Cricket" for an average of 1500-4000 rubles.

The tool can cut metal with stiffeners and various profile stampings in two ways. The first option involves repeating the surface of the profile, bending around the edges. It is used for products with an average bending radius. For cutting metal tiles, another cutting option is used, according to which the tool moves along the stiffeners without bending around the sheet profile.

Before you buy a nozzle for a Cricket drill, you should consider the main drawback of the tool. Due to the fact that the punch of the nozzle has a diameter of several millimeters, when cutting the product, a cut of a certain width is formed, which leads to certain material costs. The result is crescent-shaped, sharp-edged metal shavings that should be disposed of immediately for safety reasons.

Useful advice! When working with the tool, do not wear soft shoes.

Nozzle for drill "Cricket" does not require adjustment, easy to use and maintain

One of the most popular models is the Cricket scissor attachment for metal up to 1.6 mm Enkor 14210. The tool is able to cut a sufficiently thick metal sheet in a straight or curved direction. You can buy a nozzle for a drill for cutting metal for 1300 rubles. The main feature of the equipment is that during the cutting process a path with a width of only 1.6 mm is formed, which provides a fairly good level of material savings.

The device can be installed not only on a drill, but also on a screwdriver. The metal cutting attachment is lightweight, which does not add weight electrical appliance. The kit includes a replaceable handle, which increases the accuracy of the work. The device has low level noise due to its special design, which makes working with it more comfortable.

Nozzle on a drill for sharpening drills

This device consists of a plastic case, inside which a special-shaped emery wheel rotates. It is he who allows you to form the required sharpening angle on the working part of the tool. The circle is mounted on a shaft, which is connected to the drill with a special coupling. It is activated when the tool is turned on.

Many modern models have an end cap on the body, in which holes are located different diameter for sharpening drills different sizes. These holes are made in such a way that the element for sharpening is in contact with the emery wheel in a certain position.

The principle of operation of the sharpening nozzle is simple - when the drill is turned on, the chuck rotates the whetstone located inside

The process of sharpening the drill is as follows. The product is inserted with the cutting part into the nozzle hole of the corresponding diameter. After starting the drill, the emery wheel begins to rotate, sharpening half of the drill bit. Then the product is turned over in the hole by 180 degrees, and the procedure is repeated. This sequence of actions is performed several times until the required parameters of the cutting part of the drill are reached.

A drill attachment for sharpening drills, which you can buy on average for 350-500 rubles, has 15 holes with diameters from 3.5 to 10 mm. Products can be sharpened at an angle of 180 degrees due to the special shape of the stone. Simple design device allows you to perform work quickly and without special skills.

Related article:

Types of structures, their characteristics and features. Overview the best manufacturers machine tools. Comparative characteristics rates.

However, it should be remembered that the device is intended for sharpening sagging cutting edges. For a full-fledged sharpening of heavily worn products, an emery wheel will not be enough for a long time.

Useful advice! When buying a nozzle of a certain model, you should consider the diameter of the drill chuck.

There is also another type of additive. This is a nozzle for a drill for sharpening knives and scissors, which is presented in the form of two emery wheels planted on a shaft and located at a certain distance from each other. The price of such a device is about 250 rubles.

The nozzle for and scissors for a drill is easy to operate, does not require special skills in its use.

Nozzle for a drill for grinding

Using a grinding attachment on a drill, old coatings, corrosion, nicks, scales are removed from the surface of the product. It is used for grinding the edge of glass, metal parts and products made of other materials. Due to the small size of the equipment, hard-to-reach areas can be processed. The average cost of a product is 500 rubles.

Grinding drill attachments are used for preliminary rough preparation of the base for future polishing. It is made in the form of a rod, on which grinding material is fixed in the form of a brush or sandpaper. There are various types of such devices that are used for specific tasks.

A cup attachment for a drill for grinding wood or other material is represented by a rod mounted on a chuck and a cup-shaped body filled with light or hard bristles. The body is made of metal or durable and lightweight plastic. Usually such a nozzle is used to remove old coating or corrosion from the surface.

Another variation is the disc attachment for a metal grinding drill, where the bristles of the grinding material are in the form of a brass brush or steel wire, is directed to the edges of the disk from its center. This additive should be used very carefully, as it can easily damage the coating. The plate nozzle has a movable or fixed rod, which is fixed on the cartridge. Sandpaper is attached to it with Velcro.

Useful advice! It is better to purchase nozzles with a movable rod, which allows you to adjust the angle of the drill, while smoothly following the contours of the material.

A petal or fan grinding nozzle is represented by a rod on which pieces of sandpaper or other abrasive material are fixed. It is used to perform radius grinding or surface treatment with a complex profile. It can also be used for grinding holes, as well as carbide cutters or cutters that work on the principle of a file.

Grinding abrasive stones mounted on the rod are used to remove sagging, burrs, boring holes or leveling the weld.

Drill bits for polishing

After grinding the base, it is necessary to give it a smooth surface. This is done by polishing using special nozzles. They can be made from felt, wool, foam or felt. According to the degree of softness, they can be hard, soft, super soft and embossed. According to the method of fastening, nozzles with a stem, with Velcro and with a holder-lock are distinguished. Fan or disk nozzles are used for polishing discs, end devices are used for holes. The average price of a product is 250-300 rubles.

Many motorists have in their arsenal a nozzle for a drill for polishing a car. However, when choosing this product, you should consider some features:

the device must be of high quality and professional;
for effective and safe polishing procedures, the maximum number of revolutions of the drill should not exceed 3000 rpm, which is indicated in the characteristics of the device, otherwise the paint will simply burn out;
the nozzle must be from a well-known brand;
the device should not be included in the budget products;
to polish each individual part of the car, you should use a special nozzle designed specifically for this purpose.

The process of polishing a car with a drill is a very complex and time-consuming process that requires certain skills. If there is no experience, you first need to study all the intricacies of this process, master the basic techniques presented in the videos on the Internet. It is better to start with inconspicuous areas of the body. The tool is adjusted to the desired parameters, taking into account the required number of revolutions. The nozzle should not be pressed too hard against the surface to high temperature don't burn the paint.

Nozzle for a drill for plucking birds

Plucking a bird is a very time-consuming process, especially when it is necessary to process several carcasses. Therefore, many farmers were constantly looking for new solutions not only to make work easier, but also to reduce the overall time. For this purpose, a feather attachment for a drill was specially developed, which removes feathers from a bird in a matter of minutes. It is similar to a dishwashing brush, only silicone fingers act as bristles here, which, when the shaft rotates, pull feathers out of the carcass. At the same time, the bird is brought from different sides.

Nozzle for a drill for plucking birds, which you can buy on average for 1500 rubles. processes poultry carcasses in just 2-3 minutes, leaving not a single feather. The result is smooth, undamaged skin. The device is effective not only for processing chickens, but also gives a good result when plucking geese. The drill attachment can be used not only for fresh, but also for frozen poultry.

Useful advice! It is not recommended to scald the carcass with boiling water before using the nozzle, which will reduce the efficiency of the processing process.

The main advantages of the drill attachment, which you can buy at any specialized store, are the speed, ease and portability of use, which does not require certain skills and additional processing of the carcass before plucking. A significant disadvantage of the device is that after this mechanical process, damage remains on the carcass, which worsens it. appearance. Therefore, if the bird is intended for sale, it should be plucked manually.

Other types of nozzles

When it is not possible to make a hole in the usual mode, you need to use an angled nozzle for a drill. The working head of such a device can be rotated at different angles relative to the axis of rotation of the drill chuck. The main disadvantage of the equipment is the increased risk of drill failure. Therefore, the most popular is the 90-degree angle nozzle for a drill, which is fixed on the neck of the drill. The price of the product is an average of 800 rubles.

For craftsmen who are engaged in the manufacture of furniture, cutter bits are very popular. various kinds. They can be backed and pointed. With their help, you can make grooves different shapes and depth, process holes and remove defects. The cost of equipment is in the range of 350-450 rubles.

To mix a solution of different consistency, a mixer nozzle for a drill is used, which is selected taking into account the density of the solution. So for mixing glue, liquid putties and other fluid mixtures, spiral devices are used that prevent splashing of the solution. For mixing concrete, nozzles with a tail in the form of a hexagon are used. Mixing mixtures with this nozzle will be carried out quickly and efficiently. However, in order not to reduce the efficiency of the device, it is necessary to maintain the volume of the mixture for kneading. The price of the nozzle is 500 rubles.

Useful advice! When choosing a mixer attachment for a drill, it is necessary to take into account the power of the tool. An increase in load can lead to burnout of the winding.

Indispensable in concreting is a vibrator for concrete on a drill, the price of which is about 900 rubles. It is used to compact the concrete mass during its laying, namely, it is designed to remove bubbles and air layers from fresh concrete. The nozzle requires a drill with a power of at least 1500 watts.

For woodworking home master you just can’t do without a nozzle for a drill for cutting wood, the average price of which is 2000 rubles. To pump liquid, you can use a nozzle-pump.

A wide selection of different nozzles, fixtures and accessories makes the drill a versatile tool that is indispensable when performing repair work and for other household needs in the home. This is a simple and optimal solution that will allow you to avoid buying expensive specialized power tools.