Decorative finish of the cabinet made by hand. How to update an old closet

Soviet-era furniture - walls, cabinets, chests of drawers - does not differ in beauty, but is reliable and strong. Well, it's just that the hand does not rise to take it to the landfill. And rightly so. It is very easy to update it, giving it a completely new sound and a modern look. Alteration of cabinet-type furniture may not be very difficult: there are materials that allow you to significantly change with little effort appearance. The easiest way is to change the color and accessories. With fittings, everything is clear - choose what is more suitable for the style, and the color changes in two ways - paint and glue the film (or wallpaper).

Alteration of the old wall: changing the design

Pasting old furniture with self-adhesive film is the easiest way to change the decor. The film is today both monophonic and color, different colors, textures and shades. It does not make sense to glue a film with a wood pattern: otherwise it is in trend today. But plain or with a pattern - this is what can turn an old wall into new furniture. The actions are simple, but the work requires accuracy. But the result is excellent. See two photos. On the first one there is an old Soviet wall from before the renovation, on the second - after.

Updating an old furniture wall - before and after

Now about how it was updated. A compacted self-adhesive furniture film was used, cream color, matte surface. The open part of the old wall was closed with glass doors, a translucent matte film was taken for the glass. Edging - furniture layout (also self-adhesive) color chrome. The order of work is as follows:

Everything that can be removed, removed, disassembled. Remove old hardware.
Surfaces must be clean and free of grease. This is easier to achieve with a soft cloth dipped in dish detergent. Then everything is washed off with warm water with a little vinegar. Wipe clean with a dry cloth.
Cut out the details. It is better to cut the film 8-10 mm more. The rest is then cut off with a paper cutter.
Spray the part to be glued with water from a spray bottle. On a wet surface, the film can be moved if something goes wrong. You can even peel it off without damaging it.
Taking it off the film protective layer, lay out carefully. Having aligned, begin to smooth with a soft cloth from the middle to the edges. Try not to have bubbles. To do this, you need to move gradually, without jumping from place to place.
If there is still a bubble, it can be pierced with a thin needle approximately in the middle. Then expel air from the edges of the bubble to the hole and wipe the puncture site.
After gluing the film, we take a clean thin cotton fabric, spread it on top and iron it with a warm iron (medium heat).
We glue the trim, install new handles.

Such a sequence of work with every detail. With glass, everything is the same, only you need to glue it on the inner surface. After assembly, you have an updated wall. This technique can be used for any item: chest of drawers, bedside tables, wardrobe, etc.

For example, after a successful experiment with the wall, they redid the old cabinet in the same way and added it to the right. Now the whole wall is occupied. In the same way, you can update the kitchen set: stick a self-adhesive film and replace the handles.

There is a second way. It is a modification of the proposed method, but simpler and less laborious. Only the doors are pasted over and not with a film, but with non-woven wallpaper. Wallpaper is glued to PVA glue. To prevent the edges from bulging, the parts are cut 5 mm less on all sides. It turns out a kind of edging. Everything looks good (example in the photo below).

What is good about this method: it is easy to change the decor. Tired of the old appearance, cut off the wallpaper, pasted new ones. Despite the fact that the method seems frivolous, the appearance persists for several years. Its author even tried it on kitchen set. Only the wallpaper on top is covered twice with PVA glue. In this case, the lockers can be washed. It is important to apply a layer of varnish evenly, without sagging, there are no other difficulties.

Sometimes the wallpaper is varnished. But before you do it, try it on an unnecessary piece: see how they react to it.

When choosing a varnish, you need to remember that acrylic and cellulose varnishes remain transparent after drying, polyurethane turns yellow after a while. Also, polyurethane is almost not softened by solvents: it can only be removed mechanically (from wood it is cleaned with sandpaper).

Dresser update

The old chest of drawers stood for who knows how many years in the attic, but it is very strong and reliable, not a single gram of cracked, only the polishing cracked. In terms of strength, it far exceeds modern products. This is the feature that is inherent in the old, still Soviet times, furniture. It is not very rich in details (to put it mildly), but having stood for several decades in bad conditions, remains strong. The makeover of the chest of drawers is more complicated: two techniques were used: painting, and then decorating with polyurethane moldings and wallpaper.

Step 1. We remove the accessories, remove the old coating. In some places the polishing was scraped off, in some places it was polished with sandpaper. Chips were covered with putty on wood, waited until it dries. At the final stage, everything was cleaned with a sandpaper with a fine grain. At the same time, the chest of drawers became the same as in the photo below.

This is after it has been puttied and smoothed with sandpaper.

Step 2. Installation of polyurethane moldings. When choosing moldings, make sure that they are not voluminous: too thick on a small chest of drawers will look very rough. They should be no wider than 5 cm and as narrow as possible when viewed from a profile.

Purchased polyurethane moldings are neatly cut, the corners are sawn down at 45 °. (). The pattern match must be perfect. We glue them on PVA. For reliability, you can additionally fix it on self-tapping screws with wide caps. A small recess is made under them, after the screw is screwed in, the hole is covered with putty. Try to ensure that the putty immediately lays down perfectly (you can touch it up with a wet finger), since it is problematic to clean off the dried one.

Moldings are glued and put on self-tapping screws

Step 3 Everything is treated with a primer. You can use PVA glue diluted with water in a ratio of 1: 2. After the primer dries, paint (two layers). For this case, water-based acrylic paint was chosen. The color is coffee with milk, although it looks very different in the photo. Color rendering is inaccurate.

This is after the second application of paint. pretty

Step 4 For decoration, wallpaper was chosen, in which the coating is made using the silk-screen printing technique. Pieces are cut according to the size of the inside of the frames from the moldings, glued to the PVA. After the glue dries, the entire chest of drawers is coated twice with a water-based varnish.

Step 5 And the last to install new legs (furniture wheels) and handles.

We install handles and legs)) The updated chest of drawers is not at all like the one you saw in the first photo.

As you can see, there are no difficult jobs. Everything is really elementary. But all processes require accuracy - the appearance depends on it. In the same way, you can update the old wardrobe. Get a set for the room. Stylish and original.

When updating furniture, the worst thing is if the surface is varnished. The polish takes a long time to peel off. If the surface is smooth and polishing is not damaged, you can apply a primer for difficult surfaces on it, and paint after drying. This greatly speeds up the process of painting lacquered furniture.

If you have kids and a dacha or yard, you might be interested in reading with lots of photos. And about

How to update an old nightstand

In the photo gallery below you can see the restoration process of an old polished nightstand. First, the old polishing was removed from it, puttied, sanded, and after processing it was painted twice acrylic paint. Then paper with an interesting pattern was glued to the doors (it was a gift paper bag). After drying, everything together was covered with two layers of semi-gloss acrylic varnish.

The sequence of work is simple if you know how to do it. All processes will repeat the sequence of actions that you saw in the example of updating the chest of drawers. The result is also impressive.

Remaking furniture with your own hands is a painstaking task, but the result is worth it. Below is a photo of a bedside table restored using a simple technique: it is pasted over with embossed wallpaper, and varnish is applied twice on top.

Table makeover

By the same technology banal Coffee table can be turned into a modern piece of furniture. In this case, it was pasted over with wrapping paper. It is dense, sticks well and does not sag when applying varnish.

Before starting work on decorating the tabletop, the legs of the old table and the edges of the tabletop were painted in light color: so it fits the new style more. Then began the process of its transformation.

When pasting, the panel is cut out much larger than the dimensions of the tabletop. So it is necessary. Paper is glued on PVA, rolled with a roller so that there are no lumps and swellings. The surface must be absolutely smooth.

After pasting, take sandpaper with fine grain (it is more convenient to work if it is attached to a bar). Passing it along the edge, they bend and at the same time separate the excess paper.

Even cutting on a guillotine you will not get a fairly even edge. And with this method, it turns out to be designed professionally. Do-it-yourself and does not smell.

After the glue has dried, the surface is covered twice with a thin layer of varnish. It should be applied with a soft brush in a small amount. Layers are applied in different directions: first along the long side, then across.

Alteration of furniture: photo ideas

Remaking furniture with your own hands is a creative business. Even a boring one can be made into a great thing. And it is not necessary to repeat exactly what you see. Many useful ideas come during the execution of a "project". The only pity is that some of the plans are not as attractive as it seemed. Try, experiment. Good modern technologies allow you to do this at minimal cost.

After repair work often there are finishing materials that are a pity to throw away. For example, wallpapers that are sold in large rolls and always remain. How to use them? You can glue them on cabinets, bedside tables, doors, and other furniture.

With this simple action, you will immediately kill two birds with one stone, use the remnants of finishing material and decorate old, battered furniture. To carry out such work, you do not need any special skills, but we will now tell you how to do it.

Bright accent in a calm kitchen

Wallpaper

You have probably heard more than once that they decorate with wallpaper various items interior. How many master classes have you seen on TV from designers of all stripes, because each of them considers it his duty to give a second life to some household item.

They do this most often with high-quality vinyl wallpaper or non-woven, since it is extremely difficult to work with paper options, and in order to get at least a satisfactory result, you have to sweat a lot.

Therefore, if you still have wallpaper, before getting involved in pasting surrounding objects, make sure of the quality of the finishing material.

Our choice of color and texture is also limited, since we work with residual material, but if you want to buy a new roll for this purpose, then start from the general design of the room and your taste guidelines.

decoration kitchen furniture wallpaper

It is quite acceptable to paste over the furniture in the room with canvases with the same pattern as on the walls. Such an interior will look quite harmonious and holistic. If you want to use a different type of wallpaper, then do not forget about the general concept of the design of the room.

Application of simple design solutions, will make a more harmonious interior. For example, if the room is decorated in light colors, then it is good to use dark or bright options for pasting cabinets. If the walls in the room are wallpapered with ornaments, then in order to avoid overloading the interior, the furniture is pasted over with plain canvases. It will look very cool interior decoration closet, made to match the walls of the room.

Related article: Bathroom renovation in Khrushchev

A good option for decorating cabinets, it is an imitation of others finishing materials, wood, brick, leather, stone. Such vinyl wallpapers are often used for decoration. various rooms and of course they stay. In addition, such canvases have a significant relief and a repeating pattern, which will help hide defects on the surface of the furniture.

Classic wardrobe decor

In hardware stores, you can find special murals designed for pasting doors and cabinets. Usually these are paper versions, which depict non-trivial plots, less often a banal imitation of a wooden coating.

In fact, the wood cabinet is easiest to paste over with a self-adhesive film, which is just available in such colors. German and Dutch film is more expensive and of better quality, Chinese is cheaper, but this film often leaves the edges due to not the highest quality adhesive composition.

Note that self-adhesive wallpaper can be plain, stained glass, if this option suits you, use it.

If you are going to wallpaper a kitchen cabinet or a nightstand in the hallway, it is desirable that the wallpaper be moisture resistant for wet cleaning. This needs to be thought about in advance. Self-adhesive film has moisture-resistant qualities, like most vinyl wallpapers, but paper is weak.

The use of green and white colors that fit into the interior

If you have only paper leftovers, in principle you can use them, but after gluing you will need to apply a layer of varnish on them, which will add gloss and protect the canvases from moisture.

We make pasting

We collect the necessary materials

Before starting work, you need to take care of the tools and material. Here's what we need:

sandpaper (sandpaper), an appropriate attachment for a drill or grinder, to prepare the surface for gluing;
in some cases, a building hair dryer, but not necessarily;
measuring instruments - ruler, tape measure, corner;
tools for marking and marks - pencil, pen, marker;
cutting tool - knife, scissors;
primer and putty on wood for preparatory work;
tools for applying compositions - roller, brush, spatula;
rags for smoothing and removing glue;
PVA glue.

Related article: Choosing curtains for the windows of a small bedroom

Using a grinder for sanding surfaces

As you can see, the list is quite impressive. If you don't have any materials, buy them. By the way, if the fittings of your furniture are worn out, then you can change them. For example, a handle, a new locker handle will not cost much, but will add color to your newly pasted furniture.

Preparatory work

Before wallpapering furniture, you need to take care of the surface on which you will apply the material. We need to make it suitable for such work, so we will perform the following manipulations:

Typical domestic kitchen cabinet after decoration

To make it easier to work with a cabinet or bedside table, you need to disassemble it, remove all accessories from it.
The next step is to sand the decorative surface, remove the entire layer of varnish from it. This can be done with the help of a skin, which is very laborious, it will be easier to put the appropriate nozzle on a drill, grinder or screwdriver and walk over the varnish.

You can also remove the varnish with a building hair dryer. To do this, the surface is heated and the applied composition is scraped off with a spatula. But in this case, you can not do without sanding.

If your furniture is made of solid wood and has not been processed in any way, then it is recommended to go through the zero sandpaper to create some roughness.
In the next step, we remove all the dust from the skin, for which we use a damp cloth. Give the furniture some time to dry.
After examining the dried surface for defects, we decide whether it needs to be puttied. If the cracks and notches are not so large, and the wallpaper for pasting is embossed, you can not do this. If the defects are deep, you will have to level the surface with putty, maybe even in several layers.
As you may have guessed, after the putty has dried, putty places must be processed, leveled with a common surface. This is also done with sandpaper.
Now the surface of the cabinet is almost ready, it remains only to prime it for better adhesion to the wallpaper.

There comes a moment when you need to make an important decision - to throw away old furniture. She hasn't "fitted in" for a long time. modern interior, but still something does not allow taking junk to a landfill. And rightly so, it's better to renovate an old closet than throw it away.

It's about the good old wooden furniture. Of course, if you have a Chinese-made product at home, made from pressed sawdust and plastic, then it will be much more difficult to restore it. But if you still have a wooden “Soviet” wardrobe, then you just need to breathe new life into it.

Consider the popular ways to update furniture:

Restoration in the Art Deco style.
Decoupage.
Covering with self-adhesive film.
Craquelure.

Art Deco restoration

A bunch of ideas are always spinning in my head, and sometimes it’s so difficult to implement them! First you need to think about how to make your updated closet harmonize with the design of the room. Choose the right shade of paint and select the appropriate fittings.

Look at this photo, our updated wardrobe will look something like this:

What tools will be needed:

grinder (or sandpaper with different grains);
screwdriver;
screwdriver;
construction narrow spatula;
fretz or paint roller;
tassel;
glue;
self-tapping screws.

You need to purchase the following:

Putty (for working with wooden surfaces).
Priming fluid.
Enamel in cylinders (buy automotive black and metallic);
Furniture tape.
Glass (mirror).

Before starting work, carefully inspect the cabinet. All loose fasteners need to be tightened, and old nails replaced with self-tapping screws. If there are dangling loops, it is advisable to either twist them or replace them with new ones. In addition, when installing a new fastener, we additionally treat the junction with glue. If rust has come through, it must be removed (you can clean it off or remove it with a rust remover solution).

Work plan:

Remove the old coating with sandpaper or a grinder. Perhaps, after removing the top layer in the tree, you will find a wood-boring bug. In this case, the surface must be wiped with an antiseptic.

We carefully examine the closet. If dents and chips are found, they can be “treated” as follows: prime the surface, let it dry and fill them with putty mixture. Apply it in a thin layer, because if it is dense and thick, the mixture will not dry out and will crack.

Cracks and deep scratches can be filled furniture wax. He happens different types: hard, soft, as well as colorless or with added tint. Wax must be heated and cracks filled. If you are going to paint the surface of the cabinet in the future, then work with a colorless wax. You can clean up small defects with sandpaper.

How to paint an old wardrobe?

After all the damage has been repaired, you can prepare the cabinet for painting. Do you want to transform your furniture to such an extent that even relatives do not know? First you need to sand the places with putty with sandpaper and apply a layer of primer mixture. This important part of the work must not be skipped, because the paint on an unprepared surface may lie unevenly.

How to paint a wardrobe:

First, take a spray can with the main color. We chose metallic color. Limit with construction tape to the part that will not be painted in the main color.
Apply the base color to the surface first and wait until it dries.
The next step is to apply the second color.

Immediately after staining, you will see how your furniture will change.

Then let's start assembling: take the mirror glass and insert it into the cabinet doors, screw the fittings.

Decoupage cabinet

Restoring an old wardrobe will bring you real pleasure if you choose the decoupage technique. Currently, its popularity is increasing day by day. The principle is as follows: with the help of the selected picture, the design of your furniture changes completely.

What tools and materials are needed:

wood primer;
paint (acrylic);
acrylic varnish (colorless);
sandpaper;
paint brush;
roller (if the cabinet area is large);
picture (you can take a napkin with a pattern, cut out your favorite picture from a magazine or order a photo print).

The work plan is as follows:

We clean the surface with sandpaper.
We apply a primer mixture and leave it until completely absorbed for a day.
We paint the cabinet in the selected color (when choosing a color, be guided by the shade of the selected picture).
We expect the paint to dry completely (one to two days).

After preparatory phase Let's get to the most important part. Cut out the selected image (do not forget to match it to the color, size or theme of your interior).

We apply the cut out picture to the surface and see what happens. If you don't really like it, then try another picture. Mark it with a pencil. Then, in order not to get the effect of glued paper, but the effect of painting, you need to carefully thin the back of the picture along the edges with sandpaper by five to seven millimeters. Thus, we will get a very thin, literally papyrus edge.

How to paste the image correctly:

Dip the picture in a container of water. Let the paper soak well.
Lay it out on a towel and cover the top with the free edge.
Using a brush, apply glue to the place where your picture will be.
Lay the damp paper on the surface and gently spread it from the center to the edge. Make sure that the fit is perfect, without "wrinkles".

This is how the images should be pasted.

As a result, you will get a gentle, neat locker:

Restoration of the wardrobe

An old wardrobe can be updated with a self-adhesive film. It is matte and glossy, with color patterns, as well as "wood", "marble", "metallic".

It is good to cover with a film not only the outer part of the cabinet, but also shelves and drawers.

Work plan:

The surface must be prepared in advance and cleaned of dust with any detergent. Pour some warm water into a bowl detergent and froth. Use a soft, absorbent cloth to wipe the cabinet.
If the doors and sides of the wardrobe have roughness, chips or cracks, putty them first. Don't forget to apply primer.
Treat the surface with a special degreaser.
Take the film and outline from the inside right size. Don't forget to add a couple of inches for seam allowances around the edges.
To stick the film, carefully remove the protective paper, but not completely, but only ten centimeters.
Fix the released sticky layer on the surface. Using a soft cloth or a special spatula, gently smooth the film. Make sure no air bubbles appear.
So, step by step, carefully remove the protective paper and stick the film.
If bubbles have formed, and it is no longer possible to remove them, then you can gently pierce them with a needle and release the air.

Craquelure technique

This type of furniture decoration is distinguished by its simplicity. Special material costs for the restoration of the old cabinet will not be required.

Necessary materials:

PVA glue;
acrylic paint;
craquelure varnish (one-component);
acrylic matte varnish;
wide brush.

How to restore an old cabinet with craquelure technique:

Prepare the surface, clean and apply a primer in two or three coats, dry.
Apply paint (the base color should be darker because it will show through the cracks). Wait for it to dry completely.
Quickly and evenly cover the entire previously painted surface with craquelure varnish. The thicker the layer, the more visible and larger the cracks will be. Let the polish dry until it sticks to your fingers but doesn't leave a residue.
Apply the second tone of paint (light). After a certain time, a characteristic "grid" will appear.
After the paint has completely dried, cover the surface with acrylic varnish.

How to work with varnish:

when buying varnish in a store, choose a liquid one, because a viscous substance will lay down worse, and when it dries, the layer will be uneven;
do not shake the varnish before applying, because air bubbles can ruin your work;
if you are working with the material for the first time, practice beforehand on a different surface to understand the principle;
the room where you are going to work should not be cold and damp;
a few hours before starting work, do a wet cleaning in the room, so you get rid of small debris and dust particles on the drying surface.

The principle of operation with two-phase craquelure varnish

If a drawing is pasted on the cabinet doors that you do not want to paint over, then you need to use a two-phase craquelure varnish.

Cabinet restoration technique with two-phase craquelure:

Take a two-phase varnish. The first composition "ages" the surface, the second - forms cracks.
Oil paint.
Varnish (acrylic).
Brushes ( the average size, two or three pieces).
Bitumen or colored grout.
Foam sponge.

The surface must be covered with the first layer of varnish, dried. Quickly apply the second composition of varnish and dry the surface. When cracks appear, they need to be treated with grout. Use a foam sponge. Colored powder will “ennoble” the pattern of cracks and give the cabinet a completely different look. Then apply a layer of varnish and leave to dry completely.

How the old cabinet looks like, see the photo:

Unfortunately, we are often faced with the fact that the furniture, which was once modern and served faithfully, becomes outdated, loses its appearance and simply begins to spoil the entire interior of the room. At the same time, the very basis of such furniture, as a rule, remains strong enough, and it is simply a pity to throw it away. At such moments there is interesting idea: what if you try to update the closet (we'll talk about it in more detail today), table, chairs, armchair, etc.? How to paste over a cabinet with wallpaper, is it possible to correctly apply decor on its doors, thereby transforming the design? Let's try to understand in more detail.

First of all, it is necessary to note the fact that the restoration of the cabinet with wallpaper will significantly reduce the cost of buying new pieces of furniture. Why throw away something that can still serve properly, at least for several years? Today there are many ways to accomplish this. Here are just the most common ones:

With wallpaper.
Applying photos.
Painting with paint.
Update using mirrors.
Fabric trim.
Mosaic decoration.

Of course, each of these methods has its pros and cons. Let's just say that they are all worthy and interesting solutions, which will help to save what, as it already seemed, cannot be restored and must be replaced. Thus, you manage to reduce material costs, which, as you understand, will save quite a decent amount of money. In any case, before you start decorating, you will first need to decide which method you will use for this. But since we have decided that this article will be devoted to how to update the cabinet with wallpaper, then let's focus on this particular technology.

How to choose the right wallpaper

Despite the fact that wallpapering is the most affordable, and also, perhaps, just a way to paste over an old cabinet, you need to understand that an important step is right choice material, which without fail must be of good quality. At the same time, the choice of texture and color is not limited by anything but the imagination and desire of the owner of the apartment.

Advice! In any case, despite the fact that you can choose shades based on individual preferences, there are certain basic design laws, following which will help, in the end, to get an attractive interior.

Here are examples of what you need to consider when decorating cabinet doors or cabinets:

If available on room wallpaper certain patterns and patterns, it is desirable that the furniture be finished with a single-color coating.
Wall murals can also be used to decorate this piece of furniture. In this case, it is desirable to use narrow options.
In cases where the wallpaper in the room is pastel or light, it is best to glue the cabinet in more rich and bright colors.
At the same time, the surface that is inside the cabinet can be slightly brighter.
Self-adhesive wallpaper for the closet is also of great interest, as their use helps to complete all the restoration work at a faster pace. In addition, in this case it is much easier to do the sticking yourself, with your own hands.

As for which pattern will be optimal, then, as noted above, this remains at the choice of the owner of the decorated furniture. Of course, it is desirable to select a material that would be easy to wash using special chemicals. Exactly because of this reason, best solution there will be a refusal to use paper-based canvases, since they cannot be classified as washable. On the other hand, if it is already difficult for you, for one reason or another, to refuse such an option, it is advisable to apply over paper wallpaper glued on a cabinet, a layer of clear varnish or any other protective coating.

Now a few words about those cases when pieces of furniture to be pasted over with wallpaper have certain mechanical damage on the surface. In such cases, either the use of thick materials (for example, vinyl or non-woven wallpaper), or, alternatively, the use of canvases with small and colorful ornaments can be the best step. Such drawings will visually hide any scratches or chips.

How to paste over: instruction

Before you glue the cabinet with wallpaper, you need to prepare. To do this, you will need to select certain tools and materials, the presence of which will guarantee the quality completion of the work. So, here is a rough list of what you might need:

Spatula, pencil and ruler.
Sandpaper, scissors (will do and sharp knife for repair and construction work).
Materials for preparing the surface for gluing: primer and putty for a wooden surface.
Glue (you can use ordinary PVA carpentry adhesive), as well as a brush for applying it.

Attention! It is necessary to decorate the closet with your own hands with the help of wallpaper. In other words, it is necessary to update not only the furniture itself, but also the handles, as well as other additional structural elements, if any. Otherwise, it will look ridiculous if your wardrobe restored with wallpaper is ruined by old handles.

Once the tools and materials are at your disposal, you can begin preparatory work. So, here are the steps involved in preparation:

Remove all attachments, including internal shelves, handles, decorative ornaments etc.
Lacquer should also be removed, if any.
Wipe with a sponge dampened with water to remove the layer of dust.
Putty the damaged areas, if any, and go over the surface with fine-grained sandpaper.
Apply a layer of soil, after which it is fashionable to consider the preparatory work completed.

Let's move on to gluing. This stage of work is also divided into several parts:

Measure each part of the closet and make drawings for the wallpaper pieces. After that, you need to cut out the measured sections.
Start sticking. The adhesive composition should be applied with a convenient brush.
Carefully attach the prepared and cut sections of wallpaper to the doors and cabinet body.
Smooth out pasted sheets. To do this, you can use a special roller or a dry and clean cloth.
After the glue dries (while avoiding drafts in the room), put the previously dismantled structural and decorative elements in place.

Conclusion

As we can see, decorating a cabinet with wallpaper is not so simple, but at the same time, not a super-difficult task. Almost everyone can glue beautiful canvases, renew old furniture, and restore it with their own hands. By the way, this possibility applies to almost all types of such furniture, including bookcase, coupe, kitchen, etc.

You can see how to properly wallpaper the cabinet in the video instructions for this article:

Any furniture ages over time, loses its previously attractive appearance. But do not rush to throw away a shabby chest of drawers or a wardrobe with an outdated design - they can still not only be brought back to life, but made better, more original and more aesthetic than before. Today we will tell you how to make beautiful decor do-it-yourself old cabinet using available materials.

1. Painting

The most reliable, simple and effective solution, which at the same time gives a lot of visual options: from the palette to the way the paint is applied.

You can completely update the furniture using one color. Or cover only certain parts of it, for example, drawers, doors, handles, sides. A wardrobe painted under ombre looks modern: from a rich to dull shade in full height.

Owners of vintage wood chests of drawers with a rich texture should think twice before covering up such beauty. It is better to cover such objects with a thin, diluted layer, without hiding the luxury of antiquity.

Acrylic is rightfully considered the best type of paint for such work: it mixes well, is washed off in case of errors during operation, and does not leave pungent odors. Acrylic primer is combined with it.

Of course, this type of decor does not hide the imperfections of the surface of the object, so the latter must first be prepared. Usually, a little work with sandpaper is enough for this. But as a result, you get a completely new wardrobe!

2. Stencils and stickers

Stencils or vinyl stickers are great proof that beautiful things can be created without great artistic ability. With their help, you can decorate the closet with geometric patterns or more complex floral arrangements. The main thing is that it will look neat.

Such decor will fit well in modern design, especially if simple forms are used. With paint and a stencil, you can turn a nondescript old closet into a bright room accent.

The image is applied to a bare prepared surface or a pre-painted background. You can create smooth lines by taking duct tape, which will help you draw clear boundaries.

3. Wallpaper

If updating furniture is one of the stages of a recent renovation, do not rush to throw away the remaining meters of wallpaper. They are perfect for decorating an old wardrobe, hiding some of its shortcomings from prying eyes. Only the frame part will have to be pre-coated with paint, since paper base poorly adapts to any bends.

However, a vintage ornament will look very appropriate in combination with the texture of an old tree. Wallpapers can fit into almost any interior, as they offer wide visual variability: not only colors, patterns, but also surface textures, as they are matte, glossy or embossed. You can decorate doors, sides, even internal shelving.

The rules for gluing depend on the type of wallpaper chosen. For some, you need to carefully level the coating, while others are able to cope with the shortcomings of the furniture themselves. For better preservation of the finished product - it is covered with a protective varnish.

Wallpaper for decorating a cabinet does not have to be chosen, focusing on quality and environmental friendliness. Unlike walls, which form the "climate" in the room, they play only a decorative function.

4. Decoupage

You can decorate the cabinet with a pattern so that it merges firmly with its surface using good old decoupage. Probably everyone has come across this method in school time at the lessons of labor or needlework. Despite the "childish" simplicity, ready product can look professional and even luxurious - depending on the accuracy of the work done.

You can use ordinary napkins with the pattern you like, since today they depict anything: flowers, animals, landscapes, even paintings by famous artists. The pattern can be clear or slightly translucent, depending on the style of the chest of drawers.

Make sure that when applying thin paper, bubbles and wrinkles do not form on the coating - they need to be smoothed out immediately or started over. After the napkin dries, do not forget to coat it with varnish, as it is quite sensitive to external influences.

As the main material, you can also use newspapers, letters, tram tickets - in general, everything that will look good on your furniture.

5. Fabric

Fabric can also be used to decorate an old cabinet, and even trimmings are suitable to create a kind of craft look. Sheathing an object completely will not work, especially if it does not have a flat surface. But to close some details, making bright accents is a great solution.

Each type of fabric has its own texture: smooth silk for a sophisticated interior or coarse linen for Provence. In this property lies its advantage over other materials, not to mention the rich assortment of colors.

A separate option is the use of lace, which will ideally fit into the classics or complement the space of a sophisticated nature. In any case, to apply the fabric to the cabinet cover, it is enough to buy ordinary PVA glue.

6. Mosaic

Mosaic decor looks very bright and aesthetically pleasing, especially in the Art Deco style. A wardrobe decorated with a picture of small details will become the main “hero” of the room and will attract the attention of guests. Especially when they find out who is the author of the product.

Pieces of “broken” ceramics or multi-colored glass are traditionally used as mosaic details. You can expand this list by adding, for example, shells, sea pebbles or other material suitable for creating artistic compositions.

You can mount the elements on the surface of the cabinet using ordinary glue, attaching them one by one in the specified sequence. It is recommended to think over in advance not only the general drawing by making a small sketch, but also the location of each piece. To do this, arrange them "dry", and then begin the gluing process.

7. Mirror

A mirror is a very tricky item that hides what is behind it and focuses attention on the interior reflected in it. Using it to decorate an old closet will transform the entire space.

Wardrobe with mirror front perfect option for small rooms, which visually enlarges it. It is best to take a closet with a flat surface as a basis, which will allow you to mount a full-height mirror. In other cases, horizontal inserts, curly details, or even a mirror mosaic will look good.

8. Gilding

Gold can decorate not only women's necks, but also your wardrobe. At the same time, it is not at all necessary to give a lot of money for the sake of a luxurious look. Today, there are many alternatives for decoration, one of them is gold foil.

It is good not only for the price, but also for the possibilities - to completely cover the object or “loom” in the form of sophisticated patterns. It is easy to work with it, and the result can simply be fixed with varnish for reliability.

But keep in mind that the facade of the cabinet for such material must be appropriate. Firstly, even and perfectly smooth, otherwise the foil will not adhere well. Secondly, dark - to emphasize the "luxury" of gold.

9. Slate surface

“School” boards, which many people have nightmares about since childhood, are very popular today, especially in loft spaces. They are interactive and can be used to develop creativity or plan the day. In any case, such an acquisition will never become superfluous. So why not fit it into the front of the cabinet?

The easiest way is to paint the doors with a special slate paint, which gives a dull surface. The cabinet must be cleaned of dust and dirt, apply the product in two layers, and then wait until completely dry.

There is also a slate film, but you still need to be able to glue it correctly, which is why this solution loses to the first one.

10. Aging

What to do if you need to decorate the interior in the Provence style, but your furniture does not look old enough? The answer suggests itself - help her grow old! The process is like real art, and implementation techniques range from simple to complex, from imitation to realistic.

The easiest way to give a cabinet a vintage look is to use craquelure lacquer, which cracks when dry, creating a distinctive antique look. For Provence, respectively, you need to take white paint or other pastel shades.

Furniture looks good with a facade painted with a dry brush, leaving a small amount of paint that seems to have worn off over time.

For a more realistic effect, it is necessary to process the coating, creating noticeable reliefs. Then apply acrylic, on top of it - glaze, the amount of which is regulated with a regular sponge. But for this method, you will have to completely disassemble the cabinet.

11. Rivets

Sometimes all it takes old furniture- these are a few accents that will make it aesthetic. Some styles love rough, brutal pieces with history and character, especially loft or steampunk. In this case, to heighten the effect, you can decorate the cabinet doors with metal rivets, as well as staples that will completely change the concept of a shabby chest of drawers.

The necessary parts are easily attached with glue on wooden facade. But if you cover it with leather, you will have to use nails to fix the rivets beautifully.