Coffee table ik was an integral attribute of Soviet kits upholstered furniture. According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, and the coffee table is still in demand. Of course, you can use it not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for needlework and other necessary trifles. He will successfully play the role bedside table or stands for flowerpots or a vase of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern furniture stores are ready to offer many options for such tables, but real craftsmen can create their own exclusive version. This is also a way to save money, and sometimes an opportunity to extend the life of some things if you make it from improvised materials. In the article, we will consider how to make a coffee table with your own hands and what you need for this.
The simplest and most familiar material for the manufacture of this element of the interior, of course, is wood. In addition, wood is perhaps the most affordable and easy-to-work material. With the tools that every self-respecting man has in his arsenal, any board can become a coffee table.
Wooden coffee table - timeless classic
In order to make such a table-bench with your own hands, you will need the following materials (all dimensions are given in cm) and tools:
- boards 2.5 × 7.5 (3 pcs.);
- boards 2.5 × 10 (1 pc.);
- boards 2.5x5 (8 pcs.);
- legs of the required length (4 pieces), fastenings for them;
- screws - 3.5;
- self-tapping screws - 3;
- finishing nails - 3.75;
- glue for carpentry;
- putty, paint, primer;
- sandpaper;
- saw;
- drill;
- a pair of short and long clips;
- roulette;
- hammer;
- Kreg Jig for Hidden Holes;
- grinder.
Everything is prepared, then let's start manufacturing:
- The ends of two boards 2.5 × 7.5 sawn along the length of the table must be cut at an angle of 45º. And cut the boards 2.5x5 with a length equal to the length of the previous boards along the internal saw cut.
Reading time ≈ 4 minutes
A coffee table made of wood with your own hands can become exactly that interior detail that will add completeness and atmosphere to the whole room. After all, this will not be a trivial acquisition from a furniture store, but a hand-made thing. Don't be upset if you don't have special knowledge in the field of carpentry. We will tell you how to make a coffee table without an expensive tool and a lot of experience in our master class.
Choice of drawing, materials and tools
For the manufacture of a table, you can use many materials: glass, metal, plywood, chipboard. We will consider a simple variant with wooden beams and boards, which a person without experience can easily implement.
First you need to think over the drawings of the table, based on which they will be selected necessary materials and tool. The most simple, convenient and versatile option is the classic model. rectangular table on four legs. Table top and leg height can be customized to suit your needs.
Drawing of a classic coffee table.
Therefore, for the manufacture of the table you will need the following materials:
- Wooden beam 40*40 mm (total length 1.6 m).
- Board planed for tsarga 50 * 20 (total length 3 m).
- Planed board for countertop 10*20 mm (total length 3.2 m).
- Self-tapping screws.
- Putty for wood.
- Lacquer or paint for decorative finishes.
Instead of boards for the countertop, you can take a sheet of waterproof plywood and cut the countertop out of it. In this case, the manufacture of the table will be even simpler.
Master's advice: the drawer (the frame between the legs of the table, on which the tabletop rests) must be done, otherwise the structure will be unstable and deform over time.
It is also worth preparing the following simple tools:
- Wood saw or jigsaw.
- Electric screwdriver.
- Sandpaper (grinding nozzle for a drill / grinder).
- Level.
- Marking pencil.
Stage-by-stage production of a table
Step by step workflow:
Coffee table before painting.
Master's advice: after each layer of varnish, the product must be carefully sanded with fine-grained sandpaper (grain size 20-40 microns).
Thus, it will take you no more than a few hours to make a wooden coffee table with your own hands, as a result of which you will get a beautiful, easy-to-use product.
Video: making a coffee table from bars.
There is furniture, in which sometimes there is no urgent need, however, without it, the interior looks somehow unfinished. To add comfort, create a small coffee table with your own hands, which makes the living room feel like a family.
The advantages of creating household furniture according to your own design:
- minimum financial expenses;
- exclusivity of the model;
- personal convenience.
Ease of installation, a variety of shapes and designs, a minimum of tools - all these pluses of coffee tables attract the interest of home professionals. In our article, we will make a detailed analysis of well-known homemade products and provide practical advice for their production.
How to make a small coffee table with your own hands, combining imagination, professionalism and practicality? It is better to start the initial operations to create a unique piece of furniture with the impersonation of finished drawings with detailed instructions. Choosing this kind of option as a basis, nothing will prevent in the future from adding a based with my own hands things of the necessary originality. Tables differ from each other not only by decoration and improvised materials. The type of this interior object is also able to influence their diversity; coffee tables may differ among themselves:
- configuration (square, rectangular, round, oval);
- materials (wooden, glass, iron, plastic, combined);
- design (simple, folding, transformer, folding);
- style (typical, country, retro, hi-tech, classic, minimalism).
- the presence or absence of decorating components.
What is needed to get the job done?
How to make a coffee table with your own hands according to your design? What exactly the necessary materials will be needed depends on the basis of the object being assembled. You will need a variety of accessories.
Putting together a clear and strong table system of any size is quite problematic without glue, varnish and sandpaper. Resistant paint will not be superfluous either - choose convenient sprays, they can quickly and without getting dirty in any way, cover the entire plane of the countertop. A high quality primer may be required for spraying the base and supports. You can buy it at the building trade center. Do not forget and decor materials- fabrics of different textures and impenetrability, lace, multi-colored plastic or glass, etc.
Auxiliary raw materials will be useful - simple newspapers, a huge box, a plastic sheet, so that the remnants of "production" are not distributed around the room. In order to assemble the planned modification, it is necessary to prepare the required devices. First of all, it is a hammer, scissors, pliers. Various fixing components, furniture nails (simple and riveting) or screws of various sizes.
For fast cutting of parts out of wood you need a saw. If there is a carpentry table, and you have the skills of such work, then the existence of a chisel, cutter and planer will be a plus in order to process the wood base with professional precision. In order to decorate the components, you will need a sharp cutter or a set of carpentry knives.
Types of tables made of edged boards, chipboard or MDF
The easiest way is to make a coffee table with your own hands, using shields with edged boards, chipboard or MDF.
In order to hide the joints of the plates, a typical method is used - installation on round wooden spikes (dowels). All that needs to be done by a home specialist in this case is to specifically plan the design zones of the spikes at the ends of the sidewalls and drill mounting holes for them in the top and bottom covers.
To increase the rigidity of the installation between its side walls, it is necessary to define a sheer crossbar. An insignificant niche for saving magazines and other little things will not be superfluous here. It can be made from the stove that was left after cutting the lid and sides.
Mobility is a necessary function of the table. It is implemented by the design of furniture wheels in the bottom. Small-sized transport wheels can be hidden, or you can purchase larger ones and deliberately highlight them. Thus, we will get an unusual table on wheels from polished bars, supporting x powerful wood tabletop.
Table from boards and boxes
Those for whom mobility does not play a high role, and want to observe a solid table in their home rural style, it is allowed to offer an option from boards or a plywood coffee table. This kind of table will no doubt be one of the main jewels. in the living room of every country house.
The idea of using “random” objects to form household furniture turned out to be extremely effective. She gave life to multiple homemade products from boxes and pallets. A little bit of imagination and at least expenses are needed in order to assemble a coffee table from wood and plywood based on four standard drawers.
The production algorithm looks like this: boxes are installed on edge, arranging them according to the surroundings one by one. By connecting the system with the support of self-tapping screws, a plywood shelf is created in its middle. Here you can install a flower vase or pour decor from pebbles or shells. Finishes the work of processing wood with sandpaper, stain and varnish.
Natural wood table
Natural wood often does not need decoration. Using it for interior decoration, complete the decor with a simple table. For the purpose of its production, you will need to make several planed bars and picket fence strips.
The frame of the base will look reliable and powerful when using a contrasting color combination of different material with tabletop. For the purpose of this, the bars must be tinted with a dark stain, make a cover in natural color.
Wood in furniture goes well with metal. You can verify this by making a coffee table on metal legs. Its lid is assembled from three pieces of grooved board and framed with a plank.
For the production of legs with your own hands, you will need a welding machine, a piece of metal plate 1.5-2.0 millimeters wide, and trimming reinforcing steel with a diameter of 10-14 millimeters.
Having bent 4 rods according to the template, square pieces of plates or thick carpentry corners must be welded to them and alternately strengthened to the tabletop assembled from the grooved plank. For the purpose of final fine-tuning, it is necessary to grind, toned and varnish the lid, sides and paint the legs.
Instead of a bar, in order to produce a base, you can use rectangular pipe. Having welded 2 rectangles from it, cleaned the seams and wrapped the metal with gray paint, we get strong supports for the tabletop, assembled from oak boards. To increase stability, the iron sidewalls in front of the lid are connected with a pipe segment.
Pallet coffee table
To make elegant folding furniture, wood is often taken as the basis. Furniture can be made from an ordinary pallet. One object without gaps and four wooden supports is enough for the purpose self-creation beautiful table.
You need to do the following:
- We start making an unusual table with a pallet from the markup.
- Having decided on the dimensions and having made all the required marks, we cut out the center of the pallet: a flat plane should be with front side, relief - with symmetrically placed bars - at the bottom.
- The legs selected for work from different materials (more correctly carved) are treated with a primer and let them dry.
- At this time, you need to do the tinting of the countertop on top and sides.
- If all the components dry out, you can start fixing them. For the purpose of connection, use nails (or screws) and hardware.
- Each layer is polished with their own hands after drying.
Stump table
An unusual coffee table comes out of a solid piece of log - a stump left over from a fallen pine, birch or poplar. It should be fairly wide and smooth, with attractive rings.
Depending on the height of the stump, you can choose from the following options:
- with a low tabletop on thin metal legs;
- medium height without supports (the base of the stump works as a support);
- low table on wheels.
A do-it-yourself stump or log can be installed directly on the floor, or wheels can be attached. If desired, you can preserve the natural appearance of the stump - with a peel (keeping it as it is, or varnishing it), paint it in any color, having previously thrown off the peel. White and light brown tones look the best.
Glass table production
A do-it-yourself glass coffee table is very easy to manufacture. As a countertop, ordinary thick glass of any shape is used, preferably tempered, because the material is quite fragile and can crack. Glass is allowed just tempered, otherwise the reliability of the table will be in doubt.
The coffee table can rest on wooden legs with a wide base, books, hemp and other components. It is preferable to produce for him and the main support. The components are fixed with superglue.
Coffee table drawings
schemes with all step by step instructions how to make a coffee table with your own hands from different materials is easy to find on the Internet. Dimensioning sketches will be especially helpful for someone who plans to make a coffee table out of wood or glass. Based on the specified drawing, it will be possible to essentially make a further production process.
.
Those who are not particularly concerned about mobility may catch fire to see a solid table made in a rustic style in their living room. Such a craftsman can be offered to create a table from powerful boards. This version of the table will perfectly fit into the interior of any country house.
Unobtrusive thoughtful laziness, coupled with a thirst for creativity, can often lead to quite interesting discoveries. And one of these discoveries is a soft table made from a used tire.
It's easy to assemble:
- In the chipboard, it is necessary to cut out two round segments, 3-4 cm in diameter less than the diameter of the tire chosen for the table.
- Four legs, preferably metal, should be screwed to one of the round segments, since the table will turn out to be quite weighty.
- The bottom segment and the tabletop are attached to the sides of the wheel by means of self-tapping screws.
- After that, it remains only to decorate the sidewalls with the table top with jute piping.
In the end, the jute construction from the old tire looks great. You can use random items. After only a few hours of work with this material, consisting of 4 boxes and a pallet, a completely original and noteworthy design can be obtained.
You can also use planed bars and planks of a conventional picket fence to make a table.
Frame - a base made of picket fence can be tinted with black stain to give the structure a kind of contrast.
Also, wood can be combined well with metal parts. Here is a model of a table made from pieces of grooved board framed by a cornice strip on metal legs.
Legs made of smooth reinforcing bar look very elegant According to the made template, the bars with a cross section of 10-14 mm are bent, to them by means of welding machine corners with a thickness of 1.5 to 2 mm are welded. The tabletop is made of tongue-and-groove boards "forties". After the legs are screwed to the countertop, it should be cleaned, toned and varnished. Legs can be painted black.
An excellent way to make a frame for a coffee table would be profile pipe. Having welded two identical squares from it, painted them and provided them with a tabletop made of strong boards, a good example of country furniture came out.
For stability, the squares under the tabletop should also be connected to each other by welding and a profile pipe.
Wood saw cut will also look very original in the form of a table top.
Electric planer, grinder, varnish, a couple of hours of time and the countertop is ready. The legs of the reinforcing bar will look great under such a massive table top.
A good option is a combination of glass and wood. Here is one of the options for such a community.
Light glass is originally combined with a massive wooden base A mobile table looks very modern and stylish, made from an ordinary wooden pallet and covered with glass on top.
For lovers of functional models, a transformer table may come up. A few manipulations and the table radically changes its appearance.
The basis of the next transforming model is a pair of metal pedestal frames hinged to the table top. When the lid is turned, the horizontally lying structure rises to a vertical position.
The cover of this table is made up of two plates, shifted horizontally. One plate rotates around its own axis. If desired, this transformer can be easily deployed in dinner table for 4 people.
Transforming table "three in one" After a successful experiment with plywood scraps, such a miracle may appear
For a long time, the master had to fiddle with measurements and calculations.
In theory - everything is simple, but in appearance - you can not say.
Not otherwise, for the calculation, it was necessary to use a three-dimensional modeling program.
Some home craftsmen do not bother with the complexity of the design and conceived just like to play with cubes. And here's what comes out of it.
The cracks are begging to be covered with a glass top.
A transparent optical adhesive is best for bonding glass to wood. It will be impossible to drill ordinary glass at home without special tools.
For the manufacture of countertops, eurolining may be best suited. Spacers with legs and sides also come out well from it.
Euro lining tabletop From eurolining, you can make a tabletop of any shape. It is easy to cut with a jigsaw.
Before making a coffee table, you should prepare some tools:
- screwdriver;
- belt grinder;
- jigsaw;
- roulette;
- hacksaw.
Also, before proceeding with the manufacture, a drawing should be made, which will display the entire design and diagrams of the docking nodes.
Finishing the table should be done in two stages. Before assembly, sand the lid itself, legs and bottom with sandpaper. After the table is assembled, the product is coated with stain and varnish.
Even more simply, a table is made of chipboard. This material can simultaneously perform two functions, form a surface and carry a load. It is better to use for veneered sheets, since no varnish can hide the wood-chip texture.
Upon completion of the assembly, all edges of both the tabletop and the legs with the bottom must be sealed with a special plastic furniture tape, warming it up with a building hair dryer before gluing.
Video: Homemade coffee table
We bring to your attention 10 ideas on how to make a stylish coffee table with your own hands from unusual materials. We will use old doors, windows, tires, wooden pallets and other items that are not usually considered as raw material for a coffee table.
1. DIY coffee table from pallets
Let's start with a fairly popular Lately directions - to make furniture for summer cottages and at home from wooden pallets. By itself, the pallet is almost a finished coffee table. The pallet can be painted or left in its natural form, installed on wheels or small legs, the tabletop can be made of glass or plywood - there are many options for how to do it.
2. DIY coffee table from a radiator
Who would have thought that from the old cast iron battery you can make a coffee table with your own hands! The radiator can be put on large reliable wheels for mobility, and the countertop can be made of tempered glass or chipboard. Read details on how to make a table out of a battery.
3. DIY coffee table from the window and books
If you have changed ordinary windows to metal-plastic ones at home, then you can make an interesting coffee table out of one old window. The legs can be made from wooden blocks, or you can use old books that you still wanted to take to waste paper. For more information on how to do this, read the link.
4. Coffee table do it yourself from the door
Well, if you have replaced the input or interior doors, then old door use as material for a new table. The door is sawn into three parts - a countertop and legs. The dimensions of the pieces depend on the size of the door and the selected height of the table. The legs are attached to the tabletop with metal corners. For added stability, you can add a bottom shelf made of boards.
5. Tire coffee table
Even fashion designers use old car tires to create puffs and tables. This may just inspire you to make your own coffee table out of a tire. Close the hole in the middle with a circle of plywood of a suitable diameter. At the same time, it can be provided that such a lid opens, and things can be stored in the table. Or braid the entire table with a bundled rope, as shown.
6. Coffee table made of chipboard and logs
It seems as if this coffee table is completely made of birch logs, but it is not. In fact, the plywood box is covered with logs on the sides, and on top with birch bonfires. Read more on how to do it at the link.
7. A log or stump coffee table
A unique coffee table with your own hands can be made from a cut of a log or stump. The cut of the log needs to be cleaned and sanded, you can also varnish the surface of the log or even paint it. A sanded stump or log can be placed directly on the floor or wheels can be attached. Alternatively, install a narrow section of the log on a round stool.
8. Coffee table from the basket
A wicker square basket can become the base of a coffee table with ample storage space. Make a chipboard lid for the basket, it is possible on door hinges. If it is not possible to attach door hinges, then on the lid - countertop, stuff two strips or a woven (leather) handle on the side, with which it will be easy to open the storage space. Attach small furniture wheels to the basket.
9. DIY coffee table from drawers
Wooden boxes from fruits, vegetables or other items are a versatile material for creating furniture with your own hands. One drawer is already a nightstand or stool, two are small, and four are a large coffee table.
10. DIY coffee tables from coils
Large spools from industrial cable are a rare but perfect blank for coffee tables. However, if you are lucky enough to find a cable reel, then just clean it and put it on the floor. A round coffee table with your own hands is ready! Of course, if you wish, you can paint or somehow decorate the coil. See link for options.
