A slipway is a special device (platform) that is designed for body repair and restoration of the original body geometry using multidirectional efforts. A high-quality factory-made slipway is quite expensive and it is not advisable to purchase it for small-scale and rare body work. You can make it with your own hands, and the price for a home-made slipway will not be so high.
Calculation of the necessary materials
Before starting work on the manufacture of the slipway, it is necessary to complete its drawing and calculate the amount of required materials. The platform should look like a rectangle (and preferably several) from a metal profile with a section of 50 × 50 or 70 × 40 (the thicker the better). The optimal length is 2000 mm, the width is equal to the width of the vehicle's wheelbase.
Why was this width chosen? In general, it is possible to manufacture a slipway with a width equal to the width of the vehicle's wheelbase. Or smaller than it, but with the implementation of "sprouts" from the frame, on which the clamps will be attached. The first method is preferable because of the location of the clamps.
In the middle of the platform, it will be necessary to weld a stiffener from a similar metal profile. In the process of work, additional metal will be required, the amount of which is difficult to calculate at the initial stage of work.
After the calculation of the required number of metal profiles is completed, it can be ordered on a special base or use the existing one.
To ensure the functionality of the slipway, it will need to be equipped with good hydraulics - a kit with a tonnage of up to 10 tons is suitable.
You also need to remember that the slipway is of two types: stationary (that is, installed in a specific place without the possibility of movement) and mobile (equipped with wheels and adapted for storage and in an upright position). If the second option is chosen, then you also need to purchase a set of wheels: 4 or more for the frame, 2 for the power rack.
Making a slipway
The frame is assembled by welding. That is, skills in working with a welding machine are necessary.
Stages of work:
- First of all, a rectangle is assembled from a metal profile of the calculated length and width, exactly in the middle it must be strengthened with an additional profile. The frame is assembled as the future owner of the slipway sees fit. Perhaps he wants to further strengthen the longitudinal sides of the frame, perhaps the transverse ones. There is no definite principled position on this issue.
- To increase the stability of the car on the slipway, in its corners it is necessary to weld heights that will prevent the car from possible exit.
- The next step is the installation of fasteners on the longitudinal sides of the frame. Fasteners are clamps with sponges that will be required to securely fix the car frame when loads are applied to it. There can be no strict place for fixing fasteners, they must be able to move along the entire length of the frame. Making clips with your own hands is also possible, but if they are freely available, then there is not much point in this, since a home-made clip will cost about the same as a factory one.
- The next step is to install the power rack. The power rack is an inverted "G" shaped device, which must also move throughout the frame and be securely fixed in any place. You can make not one, but two power racks.
- Giving the slipway an aesthetic appearance. This stage consists in the usual painting of the slipway.
- Well, at the end of the work, the home-made slipway is equipped with those repair devices for the use of which it was created: hooks, chains, hydraulics.
A home-made slipway is ready, its use will help to carry out those types of body repairs that were previously possible only at auto repair shops, and the methods for it practical application can be seen in various videos.
In severe accidents, the car gets a deformation of the body. A faulty hull affects fuel consumption and handling. A body with broken geometry will not be able to protect passengers in the event of a repeated accident. This is a body repair tool essential tool for car repair.
A body straightener is a tool for body repair. The stand is designed to straighten out serious damage to the car, and is equipped with mounts that allow you to stretch the body, as well as change the shape and size of some elements. The slipway eliminates serious damage to the car body.
Types of stocks
All types of stocks have an identical principle of operation. To eliminate the deformation of the body, it is fixed to one or more areas that need to be straightened and straightened. Next, the master, using exhaust device, applies force, and straightens the damaged parts of the body.
Simple stocks designed for body repair are equipped with one exhaust device. Complex devices have several exhaust mechanisms.
There are 4 types of devices: floor, rolling, frame and platform.
Rolling
Rolling slipway is used for body repair of cars of various types. It is equipped with devices that allow you to secure the car without flanging the thresholds. Rolling stocks are convenient to use in confined spaces. Due to this, the device is used in garage conditions.
Rolling equipment cannot be used in case of distortions and changes in body geometry.
floor standing
Do-it-yourself floor slipway for body repair is a compact and effective equipment for restoring a car body in a garage or workshop. If there is no need to use an exhaust mechanism, then the rails are used for other purposes.
frame
The frame slipway belongs to the professional variety of exhaust mechanisms. The main difference from other types is that frame fixtures have complex structure.
The extraction mechanism allows you to repair different models cars. The machine is fixed on a frame, which is highly durable. With the help of an effort directed in different directions, body deformations of mild and moderate severity are pulled out.
To save space in the workshop or garage, as well as to facilitate the process of restoring the car body, they purchase body repair stands equipped with a lift.
Platform
Platform slipway for body repair is a full-fledged professional equipment. Devices of this type are used to correct damage to the body of any car, including frame SUVs.
The design of the pulling mechanism consists of special rails and an entry bridge-base. The car drives into it on its own, or it is pulled there if the car is not moving. The platform is equipped with various devices and fastening mechanisms that securely fix the vehicle on the slipway.
Platform devices have hydraulic metal racks, a winch, power and retractable blocks. Attachment beams allow you to effortlessly move heavy structures in any direction. The platform leveling stand has a telescopic scale, with the help of which accurate calculations and measurements are carried out.
The disadvantages of the platform exhaust mechanism include large dimensions and high cost of equipment. It is used in large services Maintenance cars.
Homemade equipment
Creating a homemade slipway for straightening the body will save money, as they are expensive. When designing, you should take into account the dimensions of the future device for car repair and create a drawing of the device. It can be ordered from specialists, or found ready-made on the Internet. Depending on the type of exhaust mechanism, the set of tools and materials that will be needed is different.
Manufacturing of a mobile slipway
To make a mobile device for editing the body yourself, you will need:
- From a profile with a thickness of more than 4 mm, you need to create a frame with dimensions twice the dimensions of the machine.
- The structure is reinforced with cross members and corner pieces. With the help of crossbars, the car will be fixed. They are also equipped with pull-out mechanisms.
- To make the structure mobile, four wheels are attached to the bottom.
- To be able to raise the car on the frame, a gangway is designed. On the one hand, they will have a special plug, and on the other hand, a removable section necessary for lifting the vehicle.
- The design is equipped with a bench vise or special clamps. They are needed to securely fix the machine.
In order for the structure to last for a long time, it is covered with a layer of primer and painted.
Production of a stationary slipway
When constructing a do-it-yourself leveling stand, the channel is concreted, and also reinforced with rigid crossbars. Optimal material to create a "hospital" is a metal profile with a cross section of 40 by 80 mm. The length is determined depending on the dimensions of the car.
Further along the perimeter of the frame, four fasteners are installed, which are designed for a vice that clamps the machine. They move perpendicular to the channel, thanks to which damage of any size can be repaired. The car is installed on a body repair stand using a jack: first, the front of the car is raised, then the back. In a garage or auto repair shop, you will need to mount special lugs necessary for attaching the chain.
To facilitate the process of raising the car, use a homemade lift. It is done with a winch and a special platform.
slipway - necessary equipment for do-it-yourself body repair. The device eliminates damage to the body of the car. When self-restoring the machine body, an exhaust mechanism is also necessary.
For body repairs simple tools is often insufficient and requires specialized and expensive equipment. Deformation of the main parts does not always mean the need to replace them. Restoration of body geometry can be performed in the workshop, but these services have a considerable cost. If you have the appropriate equipment, you can easily carry out repairs yourself. To perform such work, you will need a home-made slipway, the assembly of which will not take much time.
Purpose and advantages of self-manufacturing of slipway
A slipway is a mechanical equipment whose task is to restore the original state of the car frame and body geometry. Straightening of deformation bends, dents and other irregularities is carried out using local loads. In most major changes to the body geometry, the slipway is the only possible solution to restore the shape of the car frame. The presence of such equipment is mandatory for every workshop and guarantees high-quality body repairs.
To decide to make a slipway with your own hands, you need to understand not only the purpose of such a mechanism. Manufacturers offer different functionality of this equipment. Some models are only suitable for work in large service centers. There are also more mobile options that can be installed in a garage or similar room. When buying such devices for personal use, their price will be high and independent production most appropriate.
The importance of correct vehicle geometry
Deformation of the body can occur for various reasons. Accidentally hitting an obstacle, overturning while driving on rough terrain or getting into an accident do not pass without a trace for the car. Changing the geometry on the spars or a curved car frame can lead to the following consequences:
- The presence of noise and extraneous sounds during engine operation;
- Inability to open doors, luggage compartment or hood;
- Car skidding to the side when driving in a straight line;
- Slots in body panels and structural elements;
- Uneven tire wear.
Such features of damage to the frame cast doubt on the possibility of operating the vehicle. The basic dimensions of the body are indicated in the technical documentation of each vehicle. Moreover, changing them will require restoring the original parameters in order to continue driving safely. The slipway mechanisms allow you to almost completely eliminate the deformation and the independent creation of such an assistant will be a good alternative to contacting a service center.
The choice of slipway design
The use of multidirectional efforts is the most important feature power stand. Such work is difficult to do manually. You can make a slipway with your own hands various designs. Such devices are made of durable metal, and their features depend on the type of repair being performed. When choosing a suitable slipway model, the parameters of the transport for which it is manufactured should be taken into account. The dimensions of the stand, the characteristics of devices and mechanisms can be selected based on the most successful models of Trommelberg, Nordberg BAS or Autorobot.
Depending on the nature of the work being carried out and the versatility of use, there are several varieties of such power stands. With the help of small structures it will be convenient to carry out local repairs. and a large-sized industrial slipway, equipped with powerful hydraulic equipment, will cope with heavy freight transport. To select the appropriate design, you should know the types and purpose of all such devices.
Types and functionality of straightening stocks
There is no strict standardization of power stands. Most manufacturers supplement the slipway with various equipment. So, anchor clamps, special grips and a multi-tower design of the stand ensure that the force is generated in the right direction. For use in the garage, you can choose only the most necessary equipment, and the rest can be purchased or made later. All stocks can be divided into 3 types with their own characteristics and functionality.
Frame construction of the slipway
Frame slipway - is a structure for pulling relatively small deformations. Such a stand is suitable for local work and allows you to restore the geometry of the deformed area with high accuracy. The metal frame has a complex structure that serves to provide sufficient rigidity. Strong fixation allows you to stretch the vehicle in any direction and change the direction of the applied efforts.
The frame stand is quite popular due to its small size and practicality. Fixing the machine on such a frame is carried out with special grips. To pull out the deformed nodes, a chain connection is used, which ensures the restoration of the correct position of the damaged part. The kit of such an installation should include a lift to ensure the fixation of the vehicle at the required height. The arrangement of such a stand will require various parts to ensure the capture and installation of the machine.
Floor construction slipway
Floor slipway - used by professional companies specializing in body repair. Its design implies fairly high traction forces, suitable even for the restoration of freight transport. In the absence of volumes of work, this system does not take up much space, which provides additional convenience in operation. It is quite difficult to make such a do-it-yourself slipway for body repair due to the huge number of parts. In most cases, the functionality of such a power stand is not needed in a conventional garage.
Any floor slipway needs a specially prepared base. The installation of rail tracks, rack systems, anchors and fasteners requires accurate calculations and the availability of appropriate equipment. The most convenient floor slipway when installing mounting systems flush with the floor, which will ensure the safety of movement and work. The capabilities of such a power stand will be enough to access any area of deformation, and the installation and fixing of the machine does not take much time.
Platform slipway construction
Platform slipway - has some similarities with the overpass design. With the help of such a device, it is easy to pull the car body in any direction. The platform of such a device has great opportunities for installing additional equipment. It is most convenient to perform pulling on such a stand, and its functionality is sufficient for professional use or repairs in the garage.
For self-manufacturing, such a design does not present difficulties. Any platform slipway is superior in its capabilities to a frame one and is suitable for most types of vehicles. One or more towers can be used to repair the machine on this stand, which will be enough for the most difficult jobs. The pulling force of hydraulic equipment is unlimited. Moreover, such a platform can be used for body repair of SUVs and heavier equipment.
What you need to make a slipway
The stocks are produced by large world-famous companies and small regional enterprises. The price of such power stands varies greatly, but the independent production of such equipment will cost many times cheaper. Depending on the design chosen, drawings should be drawn up, providing for all the features of the future workshop. Then it remains only to prepare the necessary Consumables and tool.
To assemble a homemade slipway, you will need a metal profile, which will form the skeleton of the structure. The assembly process is carried out by welding, and the appropriate equipment must be available. The fastening system is developed individually and it is important to purchase the power rack mechanism, chains and gripping devices that are difficult to manufacture. Before starting work, metal should be prepared by cleaning it from rust, degreasing and priming. After that, you can start assembling the structure.
Making a straightening stand
To obtain a reliable frame, the profile must withstand not only the weight of the car, but also the force created by the tower rack. To perform such tasks, the thickness of the metal of the slipway should not be less than 4 mm. The platform construction of the leveling stand is most convenient for installation in the garage, and special attention should be paid to its design.
The exact dimensions of the slipway depend on the type of vehicle in need of service. In length for such a design, 4.5 m of the profile will be enough, and a width of 2 m will provide convenient installation cars. For the manufacture of the frame, a channel with a cross section of 50-120 mm is suitable, which forms a solid platform for installing the machine. Given that the load from the power tower on the profile will try to deploy it, it is required to install powerful stiffening ribs. The assembly of the frame is carried out using welding tacks, and after fitting, the final welding is performed. In general, all actions have the following order:
- Assembly of the structure according to the developed scheme;
- Welding of the body of the slipway, taking into account all the stiffeners;
- Assembly and installation of fasteners for fixing the car;
- Installation of a power rack and additional equipment;
- Installation of chains, grips and brackets.
When performing such work, special attention must be paid to the rigidity of the structure. It is possible to organize repairs on the slipway only if the machine is securely fixed. Security issues should be carefully considered. The loads acting on the frame of the vehicle during the extraction can not only damage the car, but also cause a significant blow to health.
Operation of the power stand
You can make a slipway of any design, frame or platform are most suitable for such purposes. The main thing is to take a responsible approach to work and show your own ingenuity. Understanding how to make a slipway is quite simple, but right choice material will help reduce the cost of its creation. To implement your own ideas, you should take all the best from existing models. The operation of the slipway is designed for many years and such equipment will prove its practical benefits more than once.
If you have any questions - leave them in the comments below the article. We or our visitors will be happy to answer them.
If you have a car, then it is likely that the issue of its repair is no longer a novelty. This process often requires a wide variety of tools, the presence of which greatly facilitates the task. It is precisely such a tool, or rather, a device, that is a body slipway, which you can make with your own hands.
Homemade slipway, the pros and cons of the device
"Slipway" is a special device, presented in the form of a platform for repairing the body of vehicles in order to restore their original geometry. The desired result can be achieved by multidirectional forces that act on a firmly fixed car. A high-quality factory slipway is quite expensive, so to perform various repair activities, some motorists resort to independent creation such an assistant. As practice shows, such a solution is cheaper than the finished version.
A slipway is equipment that can be used both for repairing cars and for eliminating breakdowns of large vehicles, you just need to choose the right type of device. So, today there are three main options for stocks.
Platform products help to pull the car body in a variety of positions and with different strengths, which allows you to perform body repairs from exactly the side where it is needed. Moreover, platform slipway for body repair is distinguished by its versatility, since it allows you to perform the most different types repair. The main component of such a product is a hydraulic device, and its advantage is that the damaged part of the body can be pulled in all directions. In addition, the range of repair interventions is expanded due to a reliable fastening system. The main disadvantages of platform slipways include their overall size.
for body repair provides for the presence of rails in the floor along which retractable mechanisms move. Thanks to this design, you can repair breakdowns of any complexity, because retractable mechanisms move conveniently to the right points.
The advantages of this type of devices are relatively low price, quick installation of the vehicle and space saving. If the slipway is idle, the place where the repaired vehicle is usually located can be used for other purposes, since the rails are flush with the floor. As for the shortcomings, one cannot fail to note the difficulty of performing the necessary measurements, which, in principle, is a kind of compensation for the compactness of the slipway.
Frame structures are based on a metal frame where the machine is fixed with chains. In most cases, such equipment is used in the process of minor repairs. From a constructive point of view, frame stocks have a more complex device and have special grippers for securely fixing the car body in the desired position and at a certain height. The fastening of the body in the slipway is carried out using special clamps, while the damaged part is pulled out by chains stretching from the power device.
Note! A body work clamp, especially a handmade one, plays an important role not only in the success of the business, but also in ensuring safety at work. Therefore, the strength of these elements must be given special attention.
To simplify the task of lifting a vehicle, frame stands are often used in conjunction with scissor lifts. The main advantage of such stocks is free access to the bottom of the car, its components, as well as the possibility of carrying out all work at different heights. Like the previous version, frame devices do not take up much space in the garage and are mobile. The main disadvantage of this type of stocks is the inability to level complex defects, which is explained by the limited number of drawing points. It is this fact that has led to the fact that the scope of the product is limited to simple repair work and straightening light damage to car bodies.
The last two options are rarely found in ordinary workshops, as they belong to the category professional equipment. Such devices use a very complex database and measuring technique, but if you need to do body repairs in your own garage, then you can create a not so complicated device yourself.
All types of slipways for straightening the body, including those made by hand, are capable of developing a force from 1.5 to 5 tons, making the device perfect for use on all types of cars (video procedures are easy to find on the net).
What you need to create a slipway
First of all, you need to find suitable drawings that are easy to find on the Internet. After that it starts preparatory stage including the selection of the necessary tools and materials. In particular, the creation of a home-made slipway for body repair will require the presence of metal profiles (used to create the base of the structure), longitudinal profiles for racks, metal corners for strengthening the structure, welding machine, bolts and nuts, fastening mechanisms, primer, powder paint, spray gun, hydraulic device, powerful chains and hooks.
Also, it will not be possible to do without a power rack, which must move to various points of the slipway. It is this device that applies the main force to the deformed parts of the vehicle, due to which they are aligned. Such parts are easily installed on the base of the structure and must have a high level of strength. An additional metal scarf is mounted at the place of welding of the rack and base to reinforce the structure.
To fix the vehicle on the slipway, you need to develop a fastening system, or simply follow the instructions of the selected drawing. It is best to make fasteners with the ability to change the height.
How to create a slipway with your own hands, step by step
After all the materials have been prepared, you can proceed to the direct manufacture of the slipway. To begin with, thoroughly degrease all the elements and coat them with a primer. You can also immediately powder coat the parts, although this action is often postponed until later.
At the next stage, the metal corners are welded to the base profile, and then the longitudinal part, which plays the role of a rack, is also welded (in addition, the profile must be bolted). After that, power and retractable devices, chains and hooks are installed.
The thickness of the metal profile (or, as it is also called, the channel) should be at least 4 mm, and the finished frame should be 1.5-2 times larger than the dimensions of the serviced machines. For greater structural rigidity, the frame is reinforced with metal corners, and this can be done either with the end sides or with the entire structure.
Across the frame, it is necessary to weld several crossbars, which will give the slipway even greater rigidity. In addition, it will be possible to hook an exhaust device to it or fix the car.
In order to make it possible to easily move the frame slipway, it is recommended to weld wheels to it. The power racks, through which the traction force is created, are attached to the holes drilled in the frame (they are done as needed).
Note!For fastening, it is best to use bolts previously removed from foreign cars, since most of those sold on the market today are not able to withstand heavy loads.
In order to ensure reliable fixation of repaired cars, you can use a bench vise, but it is better to purchase special clamps.
Another important point are the dimensions of the do-it-yourself slipway. So, for example, frames with parameters 180x80 cm are placed between the wheels of the vehicle for its entire length, but with its help it will not be possible to repair significant damage, although it is quite suitable for repairing thresholds, pillars or other similar parts.
In order not to make a mistake in your decision, the geometry and dimensions of the structure can be borrowed from ready-made, factory models. Some of them are ideal for working in the garage.
Important!After completing the work, be sure to check the homemade slipway in action, because all the exhaust mechanisms and the pressure of the power devices must work flawlessly.
Now you know how you can independently and without large material costs make a slipway for body repairs right in your garage.
A slipway is a mechanism for restoring the geometry of the body. The geometry of the body is the position in which the body must always be. The geometry of the body has hard points - spars, which can be damaged in the event of a car accident. If you try to create a description of the broken geometry of the body, then we can say that such consequences are possible as uneven wear of rubber, not closing some doors or the trunk, the car moving to the side when driving straight ahead, warped doorways and large gaps in the body panels. But such violations can only occur after a rather serious accident, if you break a headlight when you meet a lamppost, then the broken geometry is not your diagnosis. If the accident is quite serious and you need to restore the geometry of the body, then the body will have to be pulled out, and this can only be done on a slipway. True, body work using a slipway is quite expensive, but there is a solution - you can make a slipway for body repair with your own hands.
Which slipway do you need
In order to create your own slipway, first you need to decide what kind you need. There are three different kind slipway.
Frame slipway. This type of slipway is a simple frame. A damaged car is fixed to it and a strong chain is fixed to the place of severe deformation of the spars. With the help of powerful hydraulics, the damaged area is pulled out by this chain. The disadvantage of this design is the mandatory presence of a lift, so that it is possible to adjust the position of the car at a height.
This type of slipway belongs to a more professional type of body repair. It looks like a platform on which a system of hooks and holes is located - these are fasteners. Like the frame structure, the slipway-platform is equipped with a lift, but unlike the frame, such slipways often have several towers. Towers - this is the place for which you can pull the body - the more of them, the better and more varied the repair - the body can be pulled simultaneously in different directions. The main device also remains a powerful hydraulic device. The disadvantages include large overall dimensions.
Floor slipway. This kind of slipway is mainly used by professional companies engaged in body repair. The power of such a slipway is enough to restore the geometry of any car, even a truck. A force of up to 10 tons is able to straighten even the channel frame of a mining dump truck. The fact is that in such a slipway there are too many constituent parts, which are simply not needed by the average garage master. A bodybuilder who has decided to create such a homemade slipway will simply not be able to take advantage of the full potential and power of such a slipway.
Creation of a slipway
For the manufacture of the slipway, we need drawings. Under different sizes cars need different slipways, but for a garage master or for yourself, a universal slipway is suitable, which you can make yourself. Buying a slipway will not pay off for a long time, and since making your own slipway does not take much time and money, it's easier to make your own. So, how to make a homemade slipway? What is needed for this? In fact, everything is not as difficult as it seems at first glance.
What will be needed in the manufacture of slipway
In order to make a slipway, we need a garage in which it will actually be located. The garage should significantly exceed the overall dimensions of the slipway. This is necessary not only for free movement around the garage, but also so that hydraulics can be installed, and it does not rest against anything.
We need a variety of equipment. One of the things you can't do without is a welding machine. Welding machine must be semi-automatic. This will make it much easier to weld frames and beams, and it will be more reliable. You will also need different heads large sizes for fixing bolts and nuts. You will also need a grinder, a drill with metal drills and a spray gun.
So let's get started. To begin with, we need a huge amount of metal profile. Before you start working with it, you need to process it with a metal brush to remove rust and cover it with anti-gravel. This must be done from the very beginning so that later there are no untreated places left.
For the base of the cross beam, we need a metal profile with a cross section of at least 40 × 80 mm. A length of 150 cm will be enough. This size will be perfect for almost all types of cars. A rack will be installed on the transverse beam, on which the grips for the vehicle sills will be attached, the place for which the car body will hold. Fastening will be carried out by welded corners to the profile. In this profile, you will need to drill holes for the bolts. The connection of the profile with the rack is carried out directly through the corners - fastening with bolts.
The drilled holes must match the width of the specific vehicle. For a car that is significantly different in width, you will simply need to drill new holes.
For racks, a steel profile with a cross section of 20 × 40 mm is best suited. To create better reliability, you can strengthen them with overlays or scarves. Gussets can be cut from the remains of the same profile. Optimal Height racks 250 mm.
Corners should be welded on the racks - they will fasten the thresholds of the car. If you think that bolting is not very reliable, then you can weld nuts to the rack. If you decide to leave the bolts, then remember that the thread should be fine and frequent.
To increase the strength, it is possible to install bolts and nuts of foreign manufacturers. In any case, the quality of components on the market is much lower than that of the same components produced using foreign technology.
For durability, it is necessary to protect the device from the effects of corrosion. Clean all connections with an iron brush, degrease and apply anti-gravel. From above, it is desirable to paint the metal from a spray gun with a special anti-corrosion paint. This is necessary to protect the metal, because it will constantly be in an area with high humidity.
To install the rack on the profile-beam, use M10 bolts. Their power reserve guarantees safe operation with hydraulics, which are designed for power up to 4 tons.
The slipway is ready for installation. Install the slipway and you can start installing fasteners, such as chains and fastening vehicle sills.
If you create another such device and connect them with beams, you will get a slipway. Its advantages are that it does not need a rigid connection to the floor.
The most important rule when working with such devices is safety. When creating and installing a slipway, it must be taken into account that its power is very high and, if handled incorrectly or improperly installed, it can damage not only the car, but also harm a person.
So, making a slipway in a garage is not so difficult. The main thing is competent calculation and accuracy in handling such a powerful tool.
Video
An example of a homemade slipway in the video:
And here is a step-by-step process of making a slipway:
