How much does a laminate weigh depending on the class and thickness. Weight and cost of laminate packaging

Buying laminate flooring floor covering, the landlord chooses a modern material that meets the requirements of safety and endurance to such factors as: light, moisture, temperature rise, mechanical damage. Having decided on a specific brand and the color and texture you like, it is equally important to know how much the laminate package weighs.

Why you need to know the weight of the laminate packaging

To pack the laminate, a special shrink film with a thickness of 80 microns is used. It allows you to see the pattern and color of the purchased product, and also protects the panels from dust and moisture. Under the film there are description sheets, which indicate the manufacturer, wear resistance class and various pictograms that tell about the properties of this coating. It is also noted here how much a pack of laminate weighs, for example, the most popular class 32 with a thickness of 8 mm.

Firstly, the type of transportation of the material from the store to the house depends on the total weight of the purchased laminate. For several packages, a passenger car is suitable. For large quantities, you will have to use a special truck for transportation with a tent roof, because even sealed packs of laminate should not be transported in the rain.

Secondly, the total weight of the floor material is important when building a house, when the foundation is being erected and concrete floors are being constructed for the floor. This raises the question of the load on the base of the building, in which it is necessary to take into account many factors, including the weight of the floor material. If a laminate is chosen, for example, 32 classes with a panel thickness of 8 mm, then you need to find out how much one such package weighs. Multiplying this number by the number of packs, we get the total weight of the coating.

Changing floor cladding in old wooden houses, the calculation of the total weight of the laminate is directly related to whether the existing floors can bear the additional load. Here you need to consult a specialist.

How much the floor covering will weigh depends on its structure, and specifically, on the “core”, the composition of the carrier layer. Laminate is modern material, which is used to veneer floors, which has remarkable characteristics: hardness, wear resistance, impact resistance, thermal resistance and others.

It consists of 4 main layers, although some manufacturers may add an additional, fifth level:

The top layer protects the entire structure from mechanical shock and damage, gives the material heat resistance and light resistance. It is made from melamine resin. The strength of the coating is directly related to the thickness of the layer, but this does not affect the weight of the laminate package.
The next layer gives appearance, bears the flooring pattern, it can imitate natural materials: wood, granite, stone, sand, marble and even the skin of exotic animals.

The middle or carrier layer is the basis of the panel, which determines the thermal insulation, the resistance of the laminate to moisture, and more. This part of the board is made from fiberboard. Locking mechanisms are also located here, their strength is due to the thickness of the panel.
Stabilizing, the bottom layer creates the rigidity of the board, protects against deformation. This level contains all information about the coating, its parameters, class, characteristics and other details.

Some manufacturers also create additional levels. For example, a layer of microparticles of aluminum dioxide or corundum can be added under the upper layer to increase the strength of the coating, and another part can be applied from below to enhance sound insulation.

The main weight of the laminate board falls on the carrier layer, the heavier it is, the heavier the lamella will be. It is made from wood dust, which is impregnated with resins under high pressure and, when solidified, becomes extremely hard and rigid. HDF is a board with a high density value, MDF is a medium one. But such a characteristic as density can be indicated on the packaging. Instead, the certificate contains the thickness of the laminate panel, the weight of the pack and the area of coverage.

The laminate layers are firmly bonded to each other, and this is done using one of two technologies: HDL produces a high pressure coating and DLP low or direct pressure. Such floor material it will be durable and last for more than one year even under heavy loads, like the most famous class 32 laminate.

Laminate board dimensions

Different flooring manufacturers produce boards of different sizes, which determines the dimensions of the package and its weight. When purchasing a laminate, it is necessary to take into account these indicators.

The thickness of the panel can vary from 6 to 12 mm. Professionals generally prefer the 8mm and 32 grade. It is believed that such boards have the most convenient characteristics. They are easier to install and warmer to operate, as they have low thermal conductivity.

The length of conventional panels ranges from 126 to 138 cm. But there are exceptions, only professional installers can install boards of non-standard size up to two meters. The choice of the length of the laminate panel depends on the room. Long boards are suitable for a spacious room, and short boards are chosen for a small area.

The width of the laminate board also varies widely. 9 cm panels can mimic parquet, while 33 cm wide panels create a floor similar to ceramic tiles. The most popular types of laminate boards are 20 cm wide. This is also class 32 material with a panel thickness of 8 mm.

The last indicator of the laminate package size is the weight, which can also vary depending on the manufacturer, the number of boards, the wear resistance class and other coating parameters.

Therefore, when buying a laminate, it is worth choosing a product of a single brand, because panels of even the same class and similar sizes have different manufacturers may not match the parameters of the locking mechanisms, shades of color and quality.

Weight of individual panels and laminate packaging

Different types and classes of panels have sizes that differ significantly from each other. One package with such material can weigh about 15-17 kg. The most famous and common type of laminate has packs of 16 kg. Data is printed on the front side, where the manufacturer indicates how much 1 m² of laminate weighs in a package. So you can calculate the total weight of the floor cladding per area of a particular room. This is necessary to know for old houses with worn floors.

How much a pack of laminate weighs depends on the number of panels and on the square meters marked on the end of the box. For many brands, this is 7 to 10 stripes and 1.5 to 2.5 m². Some well-known manufacturers pack high-quality material in two boards.

As already mentioned, the weight of a laminate panel directly depends on what its “core”, the main carrier layer, is made of. Inexpensive grades of flooring typically use fibreboard. For example, the weight of one lamella having a length of 130 mm, a width of 21 mm, and a thickness of 12 mm is approximately 3 kg. The package consists of 6-10 boards. Accordingly, the total weight will be from 16 to 32 kg. "Wholesale" packs are also sold, which consist of 20 panels. Such goods are usually transported by special loaders.

But the thickness of the panel also plays an important role. Since a laminate with a higher board height belongs to classes 32, 33 and 34, both the weight of such a coating and its quality characteristics. But installation is greatly simplified.

Affects the weight of the laminate panel and the wear resistance class. According to him, the thickness of the board can be from 8 to 12 mm. Of course, the packaging weight of the most common class 32 laminate with a thickness of 8 mm will be less than a similar level coating, but with a thickness of 12 mm. On average, it ranges from 12 to 17 kg, depending on the number of panels in a pack.

How much laminate do you need to buy

When calculating how many packs of laminate you need to purchase for laying the floor, they proceed from the total area of \u200b\u200bthe surface to be repaired. To do this, they find out the parameters of all the rooms in the apartment and add up the resulting values. In an ordinary pack of flooring, on average, 8-10 boards, which will be enough to cover 2 square meters. For example, we have a room with an area of 32 m², divide this number by 2 and get 16 or right amount packs of laminate, which you need to buy. Approximate count shown. Much more accurately, this will be done by the employees of that store. building materials The in which the purchase will be made. They will also specify how much the laminate box and all purchased goods weigh.

Do not forget that a little margin should be added to the result obtained in case of damage to individual boards during installation or unforeseen replacement during operation. It may happen that a similar laminate will disappear from sale or a similar product of the same brand will be slightly different from the one that was installed in a particular room. As the saying goes, "the stock does not pull the pocket."

Laminate is a modern floor covering that imitates tiles or parquet. The quality of the material is not worse than that of a natural parquet board, and in some cases even surpasses it. Coating with 90% accuracy repeats the texture and color of solid wood. The operation of the laminate depends on the class of the material.

Over the past two years, the cost of natural wood has jumped sharply, because the buyer is increasingly inclined to choose alternative- less expensive, but high-quality laminate. Hence the question: how many squares are in a pack of laminate, because it is difficult to determine by eye the required number of packages with goods for arranging the floor in the house.

Indicators that determine the weight of packages with lamellas

Having opted for a flooring in the form of a laminate, the buyer asks himself the question: how much laminate is in the package and how many packs with lamellas will have to be purchased to install the flooring in the bedroom or guest room.

Information about the number of boards in a package and the square footage of a laminate unit is readily available and is written in the accompanying documentation. The number of products in a package differs depending on the manufacturer and according to the standard is 6-9 pieces.

In exceptional cases, packages contain up to 20 units of panels, but such packaging is rare. Therefore, how many squares are in a pack of laminate depends on the number of products.

To determine how much laminate is in the package (in m 2), it is enough to multiply the area of 1 unit of the product by the total number of lamellas in the package.

Parameters of packages with lamellas

Structural indicators, mass and parameters of the laminate determine how many squares are in a pack of laminate 33 (with a thickness of 12 mm). The linear dimensions of the panels for each manufacturer are different. This explains the differences in the number of products in one package. Therefore, information is useful not only about the area covered, but also about the number of panels in 1 package with laminate.

The table below provides information on the parameters of boards from selected collections of global laminate manufacturers sold on the Russian market.

Lamella width

To simulate the floor under the use of a coating of 330 mm, under natural wood- 190 mm. Narrow panels with a board width of 90 mm repeat the texture of parquet as closely as possible. Although lamellas 185-195 mm wide are in the greatest demand.

Panel length

The boards also differ in length. Usually this indicator is maintained within 1260-1390 mm - this is the standard. If you need products with a length of up to 2000 mm - you can do individual order. Although this embodiment has some disadvantages: installation work and sensitivity to irregularities in the base under the laminate.

Laminate thickness

The average coating thickness is 6-12 mm, the optimal one is 8 mm. Such options are not uncommon, but you can find them at any manufacturer of quality products.

Note that the thicker the board, the higher its characteristics, the easier it is to install, the warmer the floor feels. For thick lamellas, deviations in standard sizes are minimal. Products are resistant to mechanical stress, which deserve positive feedback from customers.

Weight of laminate

How many squares in a pack of laminate grade 33, you already know. And how much will such a package consisting of 8 boards weigh? It all depends on the parameters of the lamellas and the manufacturer. The average package weight is 15.5-17.5 kg, which contains 2 m 2 of a “floor” equal to 8 boards with a width of 160-185 mm and a length of just over 100 mm.

Calculation of the laminate quadrature according to technical characteristics

It is easy to calculate how many squares in a pack of laminate, knowing the parameters of the products. This number will help determine the area of coverage and suggest whether there is enough consumables purchased in the store to install a new floor in the room.

Making a mistake in the calculations, the master risks, because it is not always possible to find from a new batch an option identical in shade to the previously purchased product.

Therefore, even knowing how many squares are in a pack of laminate, experts advise taking one more pack in reserve. Set aside the slats without using the floor covering. They will come in handy when some of the boards become unusable or too worn out.

Having all the records on the parameters of the laminate on hand, you can easily calculate how many squares are in 1 pack of laminate and how many lamellas will be needed to cover the floor area in the room where the repair is being carried out.

How much laminate in 1 pack

Starting repairs, customers ask: “How many squares are in a pack of laminate?”. On average, in a pack weighing 15-17 kg, when packing 8 lamellas with a board width of 150-200 mm and a length of 1100-1200 mm, from 2 to 2.55 m 2 of flooring will be obtained.

The exact weight of the package can be found in the accompanying documentation or read the information on the end of the pack.

What to look for when buying?

When buying a product, be sure to pay attention to the parameters before calculating the quadrature, because each manufacturer adjusts the parameters of the products at its own discretion, and if you miss such a small detail, you can make a mistake.

In addition to the accompanying documentation containing all the technical characteristics of the laminate, the manufacturer attaches to the product detailed instructions about how to work with lamellas and how to properly lay the laminate on the floor. With some manufacturers, you can even find information on how much laminate is in the package on the package insert.

Square laminate and its features

There is another modification of the lamellas - a square laminate. The product line includes Quick-StepArte and Quick-StepQuadra, with dimensions of 624x624 mm and 394x394, respectively.

When choosing such a coverage, please note that the parameters of each of the models are rounded down. This nuance is often forgotten, and when starting work, the material is often not enough. Consideration should also be given to the possibility of combining the pattern with laminate panels from different batches.

Labeling details of packages with floor covering - laminate

For 80% of manufacturers, such an indicator as the area of the material in the pack can be found from the information on the pack. Because how many squares in a pack of class 32 laminate can be found out just by looking at the product packaging. If the data is missing, you can choose another simple option - ask the store for a certificate. It definitely has all the necessary data, specification, technical specifications goods.

Coverage calculation features

Work is carried out in stages:

First, calculate the floor area in the room where the floor will be laid. This requires not only multiplying the length by the width, but also taking into account design features future flooring and the subtleties of the floor layout: indents from doorways, radiators, radiators and heating pipes, architectural elements in the form of arches, columns, etc.
Prepare a drawing of the room where the repair work is taking place, indicating all the details. This will make the calculations easier.
After calculating the floor area using the formula, display the final number of m 2 with a margin for trimming the laminate. Its volume is directly proportional to the selected lamella mounting scheme. When laying the floor at an angle of 90 ° or parallel to the window, the material consumption is 7%, with diagonal flooring - at least 10%, when performing a patterned original scheme - from 25%. In any case, it will not work to predict in advance how much material you will lose.
In addition to the installation scheme, do not forget to calculate the loss of material at the joints between parquet boards or panels, the gaps between the lamella and the wall, cutting boards, rounding off the volume of material.

Detailed calculation of material quadrature using an example

You can correctly calculate the amount of materials by the ratio of the floor area and the amount required material selected brand from a particular manufacturer. This approach to the purchase of coverage will help to avoid additional costs for Consumables and laminate waste.

Having calculated the floor area and familiarized yourself with the parameters of the laminate, you can easily calculate how many packs of lamellas will be needed to install the floor covering. Let's look at an example.

Suppose the surface area is 100 m 2 . In 1 package - 8 lamellas, total area which is 2 m 2. Divide S rooms by S products and get a number equal to 50 packs of panels or 400 laminated slats.

When making calculations, one should not forget about a separate percentage of material consumption, which depends on the laying pattern. Assume that the laminate is installed at a right angle, add another 7% of the total number of packages, and this is another 4 packs of laminate.

As a result, according to the conditions given in the example, it will take 56 packs of laminate to equip 100 square meters of flooring.

Now you know how many squares are in a pack of laminate 32 (with a thickness of 8 mm), how to correctly calculate the amount of coverage area for different schemes its installation.

Choice finishing material- the process is not simple, it takes a huge amount of time not only to assess its technical abilities, but also to calculate the required volume of building materials for work. It is also important to calculate how much the packaging of the laminate weighs, this affects both the delivery of the product and the construction of the house as a whole.

We study the weight of the panels

Basic specific gravity laminate depends on what the laminated panel is made of, not the top protective layer in conjunction with the back film, namely the "core". In most cases, for rooms with medium and high traffic, a wood-fiber base is used, in rare cases, MDF is used.

Of course, one should not forget that material thickness is not the last indicator.

For example, if we consider a laminate whose length is 128 cm, width 21 cm, thickness 12 mm, and there are only 6 such panels in the package, then from the total weight of the product, we can calculate the weight of each panel separately:

Total package weight of moisture resistant laminate 17.4 kg- that is, dividing this number by 6 (the number of pieces in a pack), we get the number 2,9 - which is the weight of each product.
From the resulting amount, we subtract a few more tens of grams per packaging material - that, in fact, is all the arithmetic, the weight of the laminate 12 mm equals 2.85 kilograms.

The same approximate package weight (17 kg) can be used not only for moisture-resistant products, 8 mm laminate is sold in the same weight volumes, only the number of panels increases.

For your information! There are packs with more than 20 pieces.

Regarding the calculation of weight 1 square meter flooring, then in the case of a 12 mm laminate (from the example described above), it turns out:

With a length of 128 cm and a width of 21 cm, 4 panels will be spent per 1 square meter (we translate centimeters into square meters): 0.2 times 1.28 and we get 0.24 m2.
Now we multiply the result by 4 and get 0.96 m2 (as close as possible to a whole square meter). From this we conclude: in 1 m2 - 4 laminated panels, where the weight of each is 2.85.
Next step: multiply 4 by 2.85 and get the weight of 1 m2 of laminate approximately 11 kilograms.

Laminate weight 12 mm - on some packages everything is already indicated in detail

In fact, the class of the product also affects the weight of the laminate, that is, in order to calculate the maximum load on the floor that will occur after laying the finishing material, all parameters should be taken into account: thickness, class and dimensions.

Note! The weight of a pack of laminate is usually indicated on the brochure enclosed in the package, so for product necessary calculations just find out the number of panels and divide by the total weight.

Read here.

Why is it important to know the weight of the finishing material

When building a house, especially at the stage of building a foundation and building a floor, the question often arises - what will be the load in the end result? And since the flooring will be laid out from laminated panels, it would be right to find out how much the laminate and the substrate under it weigh.

Advice! Even if you lay the foundation of the house with a margin for actual loads, that is, you calculate the weight from the maximum allowable rate(although this is costly in terms of materials), the probability of unexpected shrinkage of a separate part of the house is high. After all, it is necessary to take into account such criteria as: precipitation, furniture, number of people, material wear, soil density - if this is allowed, then the foundation will cost a pretty penny.

How to calculate the required amount of laminate flooring

We have already answered one of the questions, now you know how to calculate the weight of a 1 m2 laminate in a residential area. Moving on to the next problem, how many packs of flooring do you need?

The most important indicator is the installation method, since there are several of them, we will consider the most popular:

Longitudinal laying of laminate

Important! Regardless of how much a pack of laminate weighs and how many panels it contains, in the first place, it is worth remembering what is added to the total working area 5-10% marriage.

For example, a living space of 20 m2 needs to be ennobled and a laminate floor should be laid on the floor. Before the calculations begin, add to this number 5% (if you are confident in your abilities) of marriage, that is, it will turn out that in fact you will need to purchase material for 21 m2.
We look at the dimensions of the panels and their number in the package (we use the example with 12 mm laminate from the first example), we get: in one pack there are 6 products with dimensions of 128x21 cm.
As we remember one panel - 0.24 m2, now we use the "power" of multiplying by 21 m2 and as a result we have 87.5 (approximate number) pieces. This is the total number of panels required for laying the flooring.
Finishing touch: divide 87.5 by 6 (pieces in one package) and get the number 14.58 (actually 15)- this is the required number of packages for ennobling 20 m2 of housing.

Note! Knowing the weight of one package of laminate - 17 kilograms, you can calculate the total weight, multiply this number by 15 and we get 255 kilograms. You will need a truck to deliver the laminate.

Diagonal styling

The calculation is carried out according to the same scheme as in the longitudinal laying, only not 5, but at least 10% is added to the marriage, at best, if you have never encountered finishing works, add 15 % .

Then click here.

Surface preparation

It should be remembered that the most important thing when laying laminated panels on the floor is its flat surface, which will avoid any nuances in the future.

For this, a cement-sand screed is poured onto the concrete floor. Several features:

The room is divided into 3-4 parts to make it easier to mount the screed.
To maintain the horizontal level, pre-mounted beacons. The photo shows an example of how they can be installed.

The most important tool in laying a cement screed is the rule, therefore, the better and smoother it is, the more effective the result will be.

Laying laminate

Work starts from the corner of the room.

The panels are attached to each other in three ways: with the click and lock locking systems (the technology instruction is included in the packaging with the laminate) and with the help of special glue.
For a more even sawing of the laminate, use a jigsaw, if it is not available, rent it at a hardware store. The price of such a "bonus" is not high, but the speed of work is doubled.

Problems with laying the finishing material should not arise, but if someone is interested or something is not clear, then you can watch the video: mounting laminated panels on the floor. We hope that the article was useful to you.

Why is it so important to know how many square meters of laminate are in a pack? During repair work the final load is always on the floor covering. To extend its service life, under laminated panels, and also resort to the use of self-leveling compounds that can level out any irregularities. Before buying lamellas, it is necessary to calculate the amount of material needed. Knowing the total figure in m³, as well as the volume of the package, you can calculate the number of packages.

! Just in case, stock up on extra packing of boards, because no one is immune from wear, breakage and other damage to the panels, which are easy to fix.

Laminate pack weight

The size of a pack of laminate is determined by the size of the boards. These rectangular objects, like any other geometric bodies, have their own height, length and width. In the acquisition process, these are exactly the indicators that you need to pay special attention to.

Height

It is also an indicator of the thickness of the boards. The thinnest options are 6 mm, the thickest are 12 mm. According to experts, best option- 8 mm. Today, such strips are produced by all manufacturers of laminated coatings. These thick boards have much best performance, including:

They are characterized by smaller deviations in size;
the floor installation process is simpler;
they conduct heat worse, which means the base is warmer;
they do not leave traces of furniture.

Length

As a rule, the length varies from 126 to 138 cm. This standard sizes. Of course, there are special exceptions, but they are rarely used. Sometimes you can find boards with a length of up to 185 cm. Yes, it is very difficult to work with such panels, because the installation process can only be entrusted to specialists. In addition, it is quite difficult to align the base under them.

Before making a final choice, explore the room. If it is spacious enough, take the material more authentic. In the case when it is small, do not use overall lamellas.

Width

Narrow stripes imitate the real parquet board. Their width is usually 9 cm. There is also an excellent imitation ceramic tiles with a width of 33 cm. But, the most popular option is still considered to be a width within 18.5-19.5 cm. This size makes the floor more natural.

How much does a pack of laminate weigh? It all depends on the manufacturer. On average, from 15 to 17 kg - the weight of a package measuring 2-2.5 m? or in other words 8 pieces per pack. The length of one board is from 110 cm to 120 cm, width - 15 cm to 20 cm.

Keep in mind that it is difficult to say the exact weight, because it all depends on the manufacturer. There are separate varieties of slats that differ in almost identical width and length parameters, such as Quick-StepArte (624 mm x 624 mm) or Quick-Step Quadra (394 mm x 394 mm). But, there are also species with completely different parameters. Take that same brand - or Quick-Step Largo. The most accurate weight is always indicated on the end of the package with slats.

You can do preliminary calculations at home, but in fact it can be done for you in a specialized store. The main parameter that you must provide is the area of \u200b\u200bthe room. The main parameters that sellers will take into account are weight, number of pieces, height, length and width values.

The area of a pack of laminate from 1.85 m? up to 2.05 m? (8-10 boards). So for laying in a room with an area of \u200b\u200b12 m? 6-7 packs are needed. Remember that the material should be taken with a small margin in order to save several boards for the future, because during the installation process even an experienced craftsman can damage 1-2 boards.

It would be completely wrong to say that there are 8 strips in any package. How many pieces of laminate are in a pack? It all depends on the manufacturer. Note that there are a lot of different variations. Let's look at the sizes of laminate from different manufacturers.

First, let's evaluate the offers of manufacturers whose package sizes depend on the collection.

Kronostar

Superior - 1380 x 193 mm (qty. - 8);
Grunhoff - 1380 x 193 mm (col. - 8);
Premier - 1380 x 193 mm (qty - 8);
Home - 1380 x 193 mm (qty. - 8);
Salzburg - 1380 x 193 mm (col. - 7);
Prime line - 1380 x 193 mm (qty - 9).

Kronospan

Castello - 1285 x 192 mm (col. - 9);
Kronofix - 1285 x 192 mm (col. - 9);
Quick Style - 1285 x 192 mm (qty - 7);
Comfort - 1285 x 192 mm (qty. - 10).

Kronoflooring

Super Natural Classic - 1285 x 192 mm (count - 9);
Castello Classic - 1285 x 192 mm (count - 9);
Variostep Classic - 1285 x 192 mm (col. - 9);
Vintage Classic - 1285 x 192 mm (count - 7);
Floordreams Classic - 1285 x 192 mm (qty. - 6);
Kronofix Cottage - 1285 x 192 mm (count - 10);
Kronofix Classic - 1285 x 192 mm (qty. - 10);
Vintage Narrow - 1285 x 123 mm (count - 9);
Variostep Narrow - 1285 x 123 mm (count - 12);
Super Natural Narrow - 1285 x 123 mm (count - 12);
Castello XL Stoneline - 1276 x 327 mm (count - 6);
Stone Impression Classic - 1285 x 327 mm (qty. - 6);
Variostep Long: - 2000 x 192 mm (col. - 6);
Castello Wide Body - 1285 x 242 mm (count - 8);
Variostep Wide Body - 1285 x 242 mm (count - 8);
Super Natural Wide Body - 1285 x 242 mm (count - 8).

Quick step

Quadra - 394 x 394 mm (count - 10);
Arte - 624 x 624 mm (count - 4);
Creo / Go - 1200 x 190 mm (qty - 8);
Classic - 1200 x 190 mm (qty. - 8);
Clix Floor - 1200 x 190 mm (qty. - 8);
Rustic - 1200 x 1234 mm (count - 12);
Exquisa - 1224 x 408 mm (col. - 2);
Lagune - 1380 x 998 mm (count - 12);
Eligna - 1380 x 156 mm (count - 8);
Elite - 1380 x 156 mm (count - 8);
Perspective - 1380 x 156 mm (count - 7);
Country - 1380 x 156 mm (count - 7);
Vogue - 1380 x 156 mm (count - 7);
Eligna Wide - 1380 x 190 mm (count - 8);
Perspective wide - 1380 x 190 mm (qty. - 6);
Colonial - 2050 x 156 mm (col. - 6);
Largo - 2050 x 205 mm (col. - 6);
Majestic Pro - 2050 x 205 mm (qty. - 6).

Tarkett

Vintage - 1292x 194 mm (qty - 8);
Legacy - 1292x 194mm (qty - 8);
Woodstock Premium - 1292 x 194 mm (qty - 8);
Woodstock - 1292x 194 mm (qty - 8);
Robinson Premium - 1292 x 194 mm (qty - 8);
Revelation - 1292x 194 mm (qty - 8);
Holiday - 1292x 194 mm (qty. - 8);
Fiesta Cool - 1292 x 194 mm (qty - 8);
Playstyle 832 - 1292x 194 mm (qty - 8);
Jungle 832 - 1292x 194 mm (qty - 8);
Select - 1292x 194 mm (qty - 8);
Lamin'Art 832 - 1292x 194 mm (qty - 8);
Polaris Style - 1292 x 194 mm (qty - 8);
Oak Art - 1292 x 194 mm (col. - 8);
Intermezzo - 1292x 194 mm (count - 8);
Cozy - 1292x 194 mm (qty - 8);
Artisan - 1292x 194 mm (col. - 7);
Infinite - 1292x 331 mm (qty - 6);
Lamin'Art - 832 - 1292 x 331 mm (qty - 6);
Eden - 1292 x 192 mm (col. - 9);
Sublime Style - 1292 x 136 mm (qty - 9);
Liberty - 1292x 159 mm (count - 7).

Ecoflooring

Country - 1215 x 143 mm (qty - 8);
Villa - 1212 x 142 mm (qty. - 8);
EPI - 1290 x 192 mm (qty - 9);
HDM - 1294 x 185 mm (qty - 8).

Egger

Many are interested in the cost of one package of laminate and what manufacturers are based on when setting the price. Everything is very simple, you need to pay attention to the design and dimensions of the panels.

Each manufacturer has its own standards regarding price category. In most cases, the parameters of the laminate differ from each other even from one manufacturer. This is due to the fact that each type of panel has a different wear resistance class, weight and thickness of the panels.

Therefore it is important to know What is this product made of? In addition, for more interest, you can watch a video clip to find out what manufacturers are guided by when setting the price for a laminate.

One package of QUICK-STER laminate, which belongs to class 32, weighs 12 kilograms.

A special wear-resistant layer of transparent color is applied on top of the laminated board. It is responsible for the abrasion of the panel surface and the classiness of the product. The cover is made from melamine resin. Corundum is added to the glossy acrylic version, which gives the soft acrylic the necessary hardness. The durability of the coating depends on the thickness of the layer, but it does not affect the weight of the laminate package.
The decorative layer is made of paper, which, according to the RAL table, can have any color and pattern, depending on the manufacturer's imagination. But in most cases, production facilities produce laminate with a pattern that imitates natural materials, including wood, stone, granite, marble, sand, etc. Such characteristics of the material practically do not affect its price.
A moisture-proof film is laid under the decorative layer, which is designed to protect the lowest HDF board. Such waterproofing plays an important role in the composition of the panels. The film reliably protects the material from moisture, even accidentally spilled water will not affect the structure of the laminated floor for three days. Such strong protection is not put on all laminate options, although many manufacturers will improve their products. To find out if the material has protection, you can find out from the instructions that came with the package.
The number four in the figure marks the stabilizing part of the panel, which is made from a high-strength fiberboard. It is important to know that the HDF marking is a mark of the European Manufacturers Association. It affects the dimensions, weight of the laminate packaging and each panel individually. The thickness of one panel determines its strength and the quality of the lock embedded around the perimeter, its operation.
On the bottom of the panel there is kraft paper, which in turn is designed to protect the stabilizing layer from the damp floor on which the laminated panels are laid. This layer usually contains full information about the laminate, its parameters, characteristics, classiness and other details are indicated. Some manufacturers equip their products with an additional layer, that is, a substrate, which somewhat affects the weight of the flooring.

Trying to understand what manufacturers are guided by when setting the price for laminate packaging, its weight or other characteristics, it is important to know that neither the weight nor the dimensions of the laminated coating affect its installation. Therefore, when choosing this flooring, you do not need to pay special attention to the weight or dimensions of the package. At the same time, it is worth saying that the packaging is not at all heavy, even a teenager can easily lift it, not like an adult.

different types laminated panels can have dimensions that differ significantly from each other. So, for example, let's take a table in which panels are located, depending on the size of their area.

At the same time, it is important to know that the weight of 1 square meter of laminate does not affect their area in any way, which cannot be said about the thickness. Not only its weight, but also the weight of the entire package depends on the amount of material consumed for the manufacture of one panel.

As a result, the mass of the panel depends on the amount of materials included in its composition. Most often, manufacturers pack 8 panels in a package, although sometimes there are packaging packs of 6 pieces.

wear resistance classes.

As you know, laminate is also distinguished by the class of wear resistance. So, for example, panels from a Chinese manufacturer can have a thickness of 8 mm, 10 mm, or 12 mm, depending on the wear resistance class.

Everyone is well aware that panels with a thickness of 8 mm will weigh less than similar panels of a different thickness. The parameters of laminated boards, as a rule, are indicated on the packaging, including its weight, in general, so it will not be difficult to find out the weight of one panel.

To do this, it is enough to divide the weight of the package by the number of panels in it. Usually one package weighs at least 12 kg. and not more than 17 kg.

Helpful information ! You can try to calculate the weight of class 33 laminate, which has the following parameters: 1280 * 240 * 12 mm and the weight of the whole package is 17.4 kg, packaging is 8 pieces. Knowing such parameters, it is very simple to calculate the weight of the panel - 17.4 / 8 = 2.175 kg. Such calculations can be carried out with any laminate packaging, regardless of its size and brand.

Considering that thick panels are high class wear resistance, their weight will also increase as well as positive characteristics. Thus, the installation of the laminated coating will be significantly simplified and its service life will be extended.

Conclusion.

Summing up the above, it is worth mentioning that heavier and thicker panels have many advantages over their light counterparts. They are heavy because they have locks embedded in the HDF around the entire perimeter.

The quality and correct operation of the lock during the installation of the floor covering depends on the width of the lock. The advantage of such panels is that when docked, they practically do not form gaps.

But if they are all there, then you can fix them with a regular hammer, and this is very easy and simple.