Master class on making crafts from natural material “Stork. Stork from plastic bottles master class Making a model of a stork from plywood

A beautiful and bright figure of a stork will add a touch of grace to backyard landscape especially if it's handmade. It may seem that making a stork is difficult and requires many years of practice in needlework, but the method of making it is simple and the materials are inexpensive. Such a sculpture will be an excellent addition to the local area and decoration for a flower bed, lawn and garden plot, symbolizing the prosperity, well-being and family comfort of its owners.

How to make a stork for a summer residence with your own hands: a master class

A do-it-yourself garden stork is one of the favorite crafts of summer residents and gardeners and there are a lot of variations of its execution on the Internet, but the manufacturing principle is approximately the same in all cases, regardless of the materials used and the richness of the decor. Read how to make beautiful wooden signs for your home.

First of all, the head, neck, torso, wing frame and legs are made, which are connected with fastening tools.

All the remaining time is devoted to a rather painstaking procedure for cutting, fringing and decorating feathers - they will make up the plumage of the body, neck and tail of the bird. There are homemade options without using plastic bottles, but they are less common. Let's take a closer look different variants making a stork in this article.

Materials and tools for a garden figure

The figure of a stork is made up of a head, beak, neck, torso, paws, wings and white plumage with layers of black feathers. All parts are fastened together with a furniture stapler and seated on universal glue.

The body of a stork can be cut out of a wooden block of the desired size, polystyrene foam or a 5-liter plastic canister.

plastic bottles 1.5 and 1 l from milk;
plastic bottles of 1.5 and 0.5 liters from kvass or beer;
canister 5 l;
scissors;
glue;
self-tapping screws;
a piece of foam;
corrugated tube;
steel bars;
frame mesh;
thin wire;
sandpaper;
furniture stapler;
red acrylic paint.

The plumage of the stork is also made from transparent bottles, but then the plastic under the feathers should first be painted with white and black acrylic paints.

Production steps from plastic bottles

Having prepared necessary materials and tools, you can start making constituent parts crafts. About beautiful wooden fences find out with your own hands.

It is important that all parts of the stork's body are proportionate to each other.

Head

With a sharp knife, the contour of the head with the beak is cut out of the foam, after which the surface is polished, and the edges of the beak are leveled with sandpaper. If desired, the head can be painted with white paint - the coating will give the future product a rich white color and create an additional barrier from the sun, wind and rain.

The beak consists of 2 plates that are attached to the head with self-tapping screws. For a beak, the neck and bottom are cut off from a dark plastic bottle, and the rest is cut into rectangular plates. Triangles are cut from the resulting blanks, which will subsequently be the upper and lower parts of the beak.

The plates are bent in the middle and screwed to the junction of the head and beak.

Paws

The paws are cut out of 2 half-liter bottles with dark walls, after cutting off their bottom. The fingers of the future bird are cut off from the very edge to the neck of the bottle - you should get 3 in front and 1 in the back, and bend outward.

Each finger is shaped into a long, sharp triangle with scissors.

Plumage

Processing blanks for feathers to give them a beautiful natural shape with feather veins is the most labor-intensive and long part of the work.

To cut feathers, the bottom and neck of the bottle are cut off, and the cylinder of the bottle is cut into 6 equal parts - 6 feathers. They will be of different sizes: for plumage of the body - small, for the tail - longer. Each feather needs to be given airiness by creating a fringed fringe around the edges. He will tell you about metal forged gazebos for giving.

Plumage on the neck can be done in 3 ways:

cutting even smaller plates than for the stomach, decorating them with a fringe and curling them with scissors;
cutting off large plates to the length of the neck and serrating their edges;
cutting off half of the bottle and making deep sharp cuts in the resulting plates.

Each pen is a rectangular plate made of a plastic bottle with a rounded or embossed edge.

frame

The body of a stork is conveniently made from a 5-liter canister, from which the handle is first cut off. Then a mesh is attached to the container, to which future feathers will be attached - it is bent and cut in the shape of a wing.

Next, you can proceed to assemble the main part of the product - a neck tube is inserted into the neck of the canister, and 2 holes are cut in the lower part, through which a long piece of a thick rod bent in half is threaded - these are paws.

The nets are fixed with wire or steel brackets on the canister.

Assembly and decoration

The stork is collected, starting from the head - it is connected with a wire to corrugated tube and additionally fixed with hot glue.

Feathers are fixed with a stapler, starting from the bottom of the canister and then upward in layers. The tail is attached to the back of the figure. The plumage is also applied to the mesh in layers, starting from the outer edge, and fixed with wire. In this case, black feathers are located on the outer edge. You will get only about 6-7 layers of feathers. The extreme row connecting to the tube is screwed with self-tapping screws.

Prepared plates with pointed edges from half bottles are wrapped around the neck.

The number of feathers depends on the location of the wings: the option under consideration is designed for folded wings, but when flapping, the wing mesh is covered with feathers from 2 sides and the back of the stork is also made.

After assembling the bird, you can proceed to the creative design of the craft.

Eyes can be bought ready-made in stores that sell parts for knitted and sewn toys and glue with hot glue. For plug-in eyes choose large black beads or balls. You can also draw eyes - with simple black or colored paints to your taste.

It is necessary to paint feathers, if transparent bottles were used during work, before cutting them, after wiping the surface of the coating with an alcohol solution.

The beak and legs of the product also need to be painted with red paint. Alternatively, you can wrap them with red tape.

What else can you make a stork from

Craftsmen manage to create masterpieces from everything that is lying around in the garage, including, and also use the leftovers building materials after repair. Several of these variations of garden storks can be safely taken into account - it will not be more difficult to make them than the previous version.

From polyurethane foam

In this way, you can create a garden sculpture by turning and giving the figure of a stork a realistic image. The “skeleton” of the product will be a steel frame - steel bars are welded to each other, and then other elements of the stork's body are mounted on them.

To make a stork you will need:

5 liter plastic bottle;
mounting foam;
steel bars;
Styrofoam;
dye;
ground solution;
Scotch;
rasp.

You need to put on the body-bottle on the frame, and attach the sharpened pieces of polystyrene to each other with adhesive tape to the neck rod. Figured foam hips are fixed in the same way.

Even with the use of waterproof plywood, the possibility of the sculpture getting wet during the cold season increases, so it is recommended to store it indoors before the onset of heat.

To make a stork you will need:

plywood;
plastic bottles with white and dark walls;
hot glue gun;
rods;
jigsaw;
self-tapping screws;
scissors;
screwdriver;
furniture stapler;
red acrylic paint.

It is advisable to apply the elements of the body and wings first on paper, creating a “pattern” of the details before cutting them out on a sheet of plywood. The wings are screwed to the body with self-tapping screws. The paws are made of steel rods and are attached with brackets to plywood sheets that act as a torso. Plywood sheets are also used for or.

Feathers are created from bottles, and each plate, in turn, is processed along the edges with scissors to obtain an airy fringe. The plumage is applied to the entire surface of the stork, starting from the back: first, black feathers are laid out, and then white, from which the tail of the bird is also created.

Each blank is sanded along the edges and the surface is primed.

a layer of red paint is applied to the plywood beak;
eyes can be drawn independently.

The bars of the legs can be sharpened from the bottom edge so that they easily fix the product in the soil.

Styrofoam

Styrofoam stork is a monolithic structure, lightweight and easy to manufacture.

For work you will need:

foam sheets;
steel bars;
glue universal;
scissors;
saw;
furniture stapler;
sandpaper;
Acrylic paint in black and red.

First of all, paws are made - the lower edges of 2 steel rods are sharpened, and the upper ones are bent for subsequent fixation in the foam body.

The main creative work on such a stork is to create the right foam blanks, because the finished bird will consist entirely of it. The body, head and neck are drawn in foam and cut with a saw. He will tell you about plastic barrels for watering at the dacha.

Iron rods are fixed in the stork's body with brackets, its surface is sheathed with a layer of foam for volume, and wing blanks are glued on top. The neck and head are mounted on a rod.

The stork's beak is painted red, and it is better to make false eyes, from beads or balls - this way the figure will turn out more expressive.

Next, the final modeling of the figure is performed, giving it smooth and beautiful features with sandpaper and a knife. This is the case when you do not need to make feathers for a bird - the relief plumage can be cut directly on the body of the product, simply by accentuating the edges of the wings with black paint.

How to make a garden stork nest

The classical composition with storks in the nest traditionally symbolized cozy house with a large family among the East Slavic peoples, indicated the fertility and hospitality of the owners. Installing storks in a nest on your own plot, in a flower bed, on the roof of a house or on a playground with children will help not only decorate the territory, but also show guests that the owners are jacks of all trades. He will tell about street country washbasins.

Old wheels from a bicycle, cart, trailer or wheelbarrow will fit under the nest frame. You can weave a nest from a bush and live or dry branches, securing the entire structure steel wire and installed on a special platform, consisting of X-shaped overlays.

Video

How to make a stork from plastic bottles, see this video:

Output

The most time-consuming and laborious work on a garden stork is to create its plumage - each feather must be worked on manually, giving the edges a jagged or fringed shape so that they look like natural bird feathers.
Feathers from transparent bottles should be dyed white and black to mimic the natural plumage of a stork.
Before painting the feathers, they must be wiped of dust and wiped with an alcohol solution so that the paint lies evenly.
The easiest way to make a stork is to make it completely out of Styrofoam and sharpen it with a knife and rasp to the desired shape; the simplest wing without a frame is made from a piece of plywood, which is screwed to the homemade body with self-tapping screws.
The body with the neck can be made from a plastic 5-liter canister with a cut off handle and neck, into which a corrugated tube is then inserted.
It is also possible to make a garden sculpture from the remnants of building materials lying around after repairs, and it will cost almost free. Additionally, you will need to buy only acrylic paints in order to draw eyes and paint feathers.

A decorative stork made of plywood with your own hands will decorate any local area. Playgrounds, summer cottages looks boring without any kind of decorations. A well-groomed flower bed will attract even more attention and please the eye if it is supplemented with a fake bird shown in the photo. There are many variations on the manufacture of artificial birds, made from all sorts of improvised materials, which sometimes you can’t even imagine in the form of crafts.

Some animals require special skills, abilities and take a lot of precious time, so it is better to take on a job that will surely turn out to be effective without painstaking efforts. One of these creations is a stork made of plywood with his own hands.

Why stork? The answer is well reasoned. Even little child it is known that this noble bird personifies peace, tranquility, family well-being, fidelity, constancy. Many beliefs and signs are associated with the location of the stork nest, their annual return and offspring.

How to start decorating

It has been proven and tested in practice that all ingenious inventions are simple and accessible to everyone. So this unpretentious composition is acceptable in terms of material costs and complexity for people who seek to embellish and ennoble not only their territory, but also the surrounding space.

You will have to work with plywood. Quite suitable material for those who are trying to learn the lessons of carpentry. The material is easy to cut, although it is quite strong and dense. It can be processed without grinder, using sandpaper. After coating with several layers of drying oil or varnish, it is generally not subject to swelling, delamination, cracking due to external effects of precipitation and temperature changes.

Garden plywood storks are made from medium grades and thickness of wood board. It is impossible to exclude the influence of environmental factors, but looking for the most expensive and high-quality plywood for outdoor exposure is an unreasonable decision. Therefore, it is meaningless to describe in detail the characteristics of the material. Whatever you get, from that an excellent creature from the feathered family is molded.

You need to start by roughly representing the actual size of the bird in order to know the specific parameters of the consumable. Plywood sheets come in different sizes, but there is no need to cut a two-meter bird. If a stork settles in the front garden, then a small bird will fit into this space, perhaps more than one. And if you mount it on the pediment of the house, a good example in the photo, then it is advisable to make a larger decor so that it is visible from afar and not lost.

How can such beauty be lost, even if the color scheme is simple and at the same time bright. Running a little ahead, you will have to stipulate that the color of the finished stork, cut and assembled with your own hands, includes only three colors: gray, red, black.

Based on the description of a stork for a summer residence or a garden, you can already draw up an estimate of materials for its manufacture:

plywood sheet;
paper or finished sketch;
pencil, scissors;
jigsaw;
paint with a brush;
ship varnish.

Work sequence

You can cut a stork out of plywood in a matter of hours. Sleight of hand and imagination will speed up the process without hindrance. The first step is to draw it. Everyone imagines what a stork looks like, but not everyone will be able to portray it.

Drawings of a plywood stork in the photo simplify the first step. It remains only to project them onto a large paper format. As can be seen in the proposed sketch, a pattern, a compass and others technical tools, are not useful. Anyone can draw two ovals and connect them with smooth lines. Try to depict a bird with a long neck, beak and wings in such a way that the silhouette resembles a representative of the stork squad. The better the proportions are respected relative to the template, the more likely it is to get a similarity to the source.

Next, the drawn silhouette must be cut out. The plywood stencil is ready. All stages of creating a symbol of devotion and good luck are within the power of even a schoolboy, so the participation of children will not hurt. The paper stork must be placed on a plywood sheet and lightly attached with buttons, a stapler, tape, whatever comes across. Outline with a pencil. The lines should be clear in order to preserve all the smooth curves of the body and the sharp angles of the beak, tail and wings when cutting. Now you can start cutting. At this stage, haste and strong pressure on the jigsaw is useless. You have to work without haste.

The plywood stork template will be completely ready after its careful grinding from all sides. The first grinding is done with coarse sandpaper, after which it is necessary to walk a couple of times with fine-grained sandpaper, including cuts. When the surface becomes smooth, without burrs, the most beautiful stage of creating a creation with your own hands begins: the assembly of all parts into a single product.

Screwing on the legs and gluing the wings is quick and easy. If the stork settles in the garden, it must be installed on the base. Take a small wooden block, drill holes in it, generously coat them with wood glue and insert the legs. Drying of the wings and support will take a little time. It is advisable to press with a clamp and fix the wings with the body.

Then it's time to color the bird. most popular and suitable paint is acrylic. The color sample is shown in the photo: the beak and legs are red (can be dark orange), the body is light gray, the plumage of the tips of the wings and tail is black, the eyes are marked with small black circles. Cover with varnish when the paint dries.

That's the whole procedure! A video with a lesson in making a magic bird is attached.

Crafts arrangement

It is not enough to make a stork out of plywood. Regardless of the location of the plywood stork, you still need to make a nest for it. It will even resemble the present, because it will have to be built from thin twigs. On a horizontal surface, the nest should become like a stork. The same wide, deep. On the gable of the roof, the nest can also imitate the nest. Make it voluminous so that the composition looks complete.

If desired, the stork is paired. Then he is not alone. "Procreating" miracle birds is inexpensive, so after a few training sculptures, you can take on more complex and labor-intensive designs.

A well-groomed and ennobled cottage contributes to the creation of an atmosphere of peace and tranquility. A do-it-yourself stork for the garden is a great addition to flower beds, flower beds and lawns. This bird is a symbol of happiness, prosperity and prosperity. Garden sculpture of a stork looks good anywhere. You can install it on the ground, roof, pole or tree. To give the product realism, a technique such as building an artificial nest is used.

Figurines of storks for giving bring happiness and benefits, they are also a good decoration for lawns and flower beds.

Sculpture from plastic bottles and plywood

To work, you need several plastic bottles in black and white. The basis of the structure will be a sheet of waterproof plywood.

To work, you will need the following tools and devices:

jigsaw;
scissors;
screwdriver or screwdriver;
pliers;
hammer;
steel staples;
self-tapping screws;
glue gun;
red nail polish;
thick wire.

The stork can be made from plywood and plastic white milk bottles that are cut into fringes for plumage.

After the tools and materials are prepared, work can begin.

It is carried out in the following sequence:

A paper template of the body and wings of the bird is made. The size of the statue is chosen based on the size of the site and the tastes of its owners.
The plywood is marked. Cutting out blanks.
The edges of the blanks are polished. Plywood is primed.
The wings are attached to the body of the stork with the help of self-tapping screws. As a rule, wings are made in the folded position.
The legs are being made. For this, a steel bar with a diameter of 6-10 mm is suitable. With the help of staples, steel parts are nailed to plywood. The lower edge of the rod can be sharpened for the convenience of fixing the product in the ground or nest.
The bottom of white milk bottles is cut off. What is left is cut into 2 parts vertically. Stripes are cut with scissors. They will imitate feathers.
Similarly, a plastic fringe is prepared from black bottles.
The cut fragments are attached to the plywood base. This is done from the tail. Black stripes are attached first. They get off the lower part of the body, tail and wings.
The rest of the bird is trimmed with white plastic stripes.
The beak is covered with red nail polish.
The eyes are drawn with black paint. You can use large buttons or eyes from one of the old toys.

The stork figure is ready. It can be easily attached to any surface. With the onset of inclement weather, it is better to remove the product and store it in a warm room until spring.

Back to index

Making a stork from foam

Typically, after external insulation there are quite a lot of foam plastic scraps left on the walls. They do not need to be disposed of. Many interesting and beautiful crafts can be made from this material. Polyfoam is light and easy to handle. You can make a stork out of foam plastic quickly, without the use of complex tools.

To work, you will need the following materials and tools:

glue;
sharp knife;
steel bar;
saw on wood;
pliers;
sandpaper;
black paint;
paint brush.

Making a sculpture of a stork for the garden is carried out in the following sequence:

Wire blanks are made to imitate the legs of a bird. Their lower ends are sharpened. The upper ends of the rod are bent at a right angle for fixing in foam.
The contours of the body parts of the bird are applied to the foam. The largest fragment should be the central part of the torso. The remaining fragments will be needed to give the figure volume, create wings, neck and head.
The pieces are cut out. This is best done with a saw.
Steel bars are fixed to the central part of the body. In order for subsequent fragments to lie tightly on the base, grooves for the rod are made in it. To avoid lateral vibrations, the rod is fixed to the base with additional brackets.
Styrofoam strips are glued to the central part of the body, giving volume. Wings are glued on top of them.
The neck and head of the sculpture are mounted on the pin.
With the help of a knife and sandpaper, the stork figure is given its final shape. Additional finishing is not needed, since a relief imitation of feathers can be created on the foam.
The tail and wings of the bird are painted with black paint. The beak can be wrapped with red tape or painted.

The final stage of needlework are the eyes. They are made from steel bearings or glass balls.

Back to index

Using mounting foam

An unused foam can can be successfully used to make a three-dimensional stork figure. With the help of foam, you can quickly make a three-dimensional blank, from which you can cut out the desired shape.

For work you will need:

plastic bottle with a capacity of 5 l;
Scotch;
Styrofoam;
steel bar;
primer;
paint brush;
acrylic paints;
sharp knife;
rasp.

There is a similar set in the closet of every house. Additional costs not required.

A garden decoration is made in the form of a sculpture of a stork in the following sequence:

The steel frame is assembled. For strength, it can be fixed by welding.
A plastic bottle is put on the frame.
Styrofoam strips are taped to the neck wire. You can pre-grind them in shape and glue them.
On the pins intended for the legs, the femoral parts, machined from foam, are placed.
The finished frame is wetted with water. Foam is applied. It covers the entire surface of the workpiece, except for the wire imitating legs.
After the foam hardens, all excess is cut off. Relief is given with a knife and a rasp. After finishing, the sculpture is cleaned of sawdust and dust.
The dried product is covered with a primer. Next, the bird needs to be painted acrylic paints. Lacquer is applied over the paint.

To give the sculpture realism, you can use natural black and white feathers that are inserted into the tips of the wings and tail.

For reliability, they need to be planted on polyurethane glue.

The finished figure can be installed in the garden on long time. The stork, decorated with acrylic paints, perfectly tolerates exposure to ultraviolet, cold and moisture.

It is very easy to make a stork from plastic bottles with your own hands, a master class will allow you to complete this product in a short time. In this case, it is necessary to strictly follow all the instructions in order to get a really good result. The product can be placed on a personal plot, which will make it possible to decorate the territory.

A master class allows you to make a stork on your own, for which you need to use plastic bottles and other improvised materials. To make the craft look the most realistic, it is necessary to make blanks from plywood. Wings and torso are drawn on them. Prepared templates must be carefully cut.

For work you will need the following materials:

plastic bottles;
insulating tape;
self-tapping screws.

It is better to take bottles that are opaque (white) and dark, and then arrange them, and only red is suitable for electrical tape.

Previously prepared templates need to be connected. To do this, you will need self-tapping screws. To make feathers, white bottles are used, in which dairy products are usually sold. They need to be cut so that strips of the same width are obtained. Along the edges, you need to make many shallow cuts to get a fringe.

The resulting wings are fixed on the body of the bird. To make the mount as strong as possible, use a glue gun. It must be applied carefully, without leaving traces of glue on the body. To make the tail and the rest of the body, which will be located below, you need to use dark plastic bottles. In such containers, for example, beer is sold.

The beak can be obtained from the blank of a plastic bottle, since the stork has a red beak, the base is wrapped with red tape. Need a stork and legs. For their manufacture, you can use a thick wire. For the eyes, take large beads, which are attached to the head with glue. On this, a stork for a garden with your own hands can be completed. It can be placed near a flower bed or on some kind of stand.

Details of the production of the second option

To make a talisman bird for the garden with your own hands, you should prepare the following materials and tools:

empty plastic bottles;
2 wooden beams: thick and wide (will serve as a base);
thick aluminum wire (you can use a rod) to make lower limbs;
polystyrene (thickness 10 cm);
corrugated hose;
plastic canister (2 pcs., capacity 5 l);
metal mesh (under the wings);
stapler.

How to make a stork with your own hands? The procedure will take a little time, but the algorithm of work is simple. On the paths personal plot or a stork will appear in the garden after a few hours of execution.

First you need to start making the head and beak of the bird. These parts are cut out of foam. On the surface, you can either draw eyes with black paint or glue 2 black buttons (you can use beads).

The beak itself must be cut out of a dark plastic bottle. It will consist of 2 parts, glued to the head. To get the body of a bird, you need to cut off the handle from the canister.

Bending tightly around the contour of the canister, bend metal mesh. Remove excess material. You can perform the lower limbs if you bend a rod, the ends of which should be fixed in a wooden block. Plastic feathers are cut from bottles. They are attached to the base of the canister. Attach the tail first.

You can plant the neck of a stork by fastening the wire to the armature. The next step is to put the prepared hose on the wire. Since the feathers on the neck should be small, they are attached with tape. Feathers along the body are fixed on a metal mesh.

Since the bird in the garden will be upright, its wings will be folded. They need to be fixed with a stapler. Feathers should be arranged so that the details of each subsequent row overlap the previous row by 1/3. This will give the craft naturalness and naturalness.

The master class ends with the fastening of individual elements. To give the product maximum attractiveness, you can perform decorative tinting of the beak, eyes, legs. The craft can stand on the street throughout the summer, it is not afraid of bad weather.

Alternative product

The original DIY stork for the garden can be complemented by a baby in the nest. The implementation of this option will help to make the home happy and bring prosperity and well-being to the house. For the manufacture of a stork sitting in a nest, patterns of the Tilda bird are used as the basis. This is a fairly modern and fashionable home-made toy made of fabric. Patterns for her are simple.

Cut out of dense and durable fabric individual elements crafts. The pieces are sewn together with a thread. To give the body volume, you need to fill it with any filler, so you don’t need to completely stitch the bird right away. Burlap, sawdust, straw, feathers, unnecessary flaps, etc. can act as a filler. After completing the filling stage, the hole is completely sewn up.

The beak is made separately. To create it, you need a strong red cardboard. The finished part is attached to the already made head. You can sew clothes. To do this, you need to take measurements from the finished bird. At the final stage, the eyes are glued, the baby is wrapped in a light cloth and placed next to the mother.

If you install crafts on the branches of trees in the garden, when it rains, you need to remove it from there so that appearance product is not damaged. Another such bird is placed on the windowsills, it will be in perfect harmony with indoor flowers.

Based on a fabric stork, the feathers are obtained from white plastic bottles that sell milk or other dairy products. They are fastened together. Finally the wings come out.

Unusual option

Noteworthy is the master class on making a stork, which is based on a large plastic bottle with a volume of 6 liters. To make the head, you need to use foam, which will need to be carefully cut. Do not forget about the shape of the beak and eyes. Black pebbles can act as eyes, which are fixed with glue.

The beak can be made from an ordinary plastic bottle. It also sticks to the head. A large plastic bottle will act as the body. It needs to cut off the neck. Special metal mesh - wings. If the bird's wings are bent, it is necessary to make appropriate bends on the grid.

The legs are made of wire, which is folded in several layers. Feathers will be from light-colored plastic bottles. They are cut so that individual feathers look realistic. Fixing is done with a wire to the wings themselves.

To make the neck look voluminous, the bottles need to be finely chopped, you get a fringe. They are arranged in rows. Small bottles are put on the paws, which are also cut at the base. If the fixation of parts seems weak, then the fastening process can be carried out using self-tapping screws.

Making a stork is not a very long and difficult undertaking. To bring the idea to life, you can use the above recommendations. However, you can make certain adjustments to the idea that will allow you to create a unique and original product.

An old legend says that God gathered all the reptiles from the Garden of Eden into one bag and ordered the man to throw him into the sea with his own hands. And the curious Homo sapiens wanted to look at the creatures, untied the bag, and, of course, missed everyone. Vladyka became angry and turned this man into a stork so that he would protect other people from all kinds of toads and snakes. Since then, storks have always settled near a person, feed on reptiles and bring us happiness.

Many old pictures depict a stork with a baby. Among the Slavic peoples, it is customary to believe that this particular bird is responsible for childbearing and well-being. If storks settled on the roof, the house will be full of happiness and children's laughter. And if you haven’t settled, then a wonderful stork with a baby can be made with your own hands from improvised material and installed on a skate or on an apple tree in the center of the garden.

bottled happiness

It will take

To make a stork from plastic bottles for the garden, we need to prepare the following materials:

empty bottles;
thick wide board for the base;
a rod or thick wire for legs;
a piece of foam 10 cm thick;
corrugated hose from a vacuum cleaner;
2 plastic canisters with a volume of 5 l;
metal mesh for wings;
stapler.

Master class on making happiness

It only takes a few hours of passionate DIY work to make almost real storks appear on the paths of your garden.

Cut out a head with a beak from a piece of foam, draw eyes or glue black beads with your own hands.

Cut out a two-piece beak from a dark bottle and glue it in place.

We begin the master class on making the torso by cutting off the handle in the canister. Then you need to bend the mesh in the shape of a canister with your own hands and cut off the excess.

To make the legs, bend the bar and fasten its ends to the board.

We are holding a master class on the preparation of plastic feathers.

We attach the feathers to the canister, starting with the tail.

The master class on fitting the neck begins with attaching the reinforcement wire. Then a hose is put on it.

Attach small "feathers" on the neck with tape.

Fix the feathers on the grid.

The stork for our garden will stand with its wings folded, so we simply fasten all the feathers with a stapler with our own hands, overlapping each previous row by a third.

We finish the master class by connecting all the details and decorative tinting of the eyes, beak and legs. This bird can be installed with your own hands in the depths of the garden for the whole summer. It will not deteriorate from the rain and will not fly away.

Fashionable toys today, hand-sewn from plain fabric according to simple patterns. We will not fully describe the master class for their manufacture.

Cut out the details of the craft from the fabric, sew and stuff with any filler.

Separately, you need to make a beak (can be made of cardboard) and attach to the head. It remains to make clothes, glue eyes, wrap the baby and hand it to the stork.

Of course, you cannot settle such a wet bird on the branches of a garden, but flower pot on the windowsill she can decorate.

Another way to make your home rich and happy is to make a stork on a nest. As a basis, you can take patterns of a tilde bird. Cut feathers out of plastic white milk bottles, fasten them together and make wings, decorating the ends with real feathers. Place a few white feathers on top of your head. Form a tail out of real feathers, sew or glue eyes and a tie, and plant the bird in the nest.

It can be made from ordinary rods, fastened with wire. To get a stork with a baby, put any doll in his wings. The master class on making a lucky amulet is over.

These two rag birds cannot be left on the paths of the garden, and the master class for making the first stork requires a lot of time and materials. Do not be upset and just make a nest and cut a flat bird out of textolite or plywood. Color it in, give it a string bag with a baby doll in its beak and that's it, the stork with the baby has already settled on your roof.