Children's high chair wooden transformer drawing. Children's chairs: options, diagrams, sizes, with and without a table, folding

• Making a wooden chair
  • Stage 1: we make parts
• How to do mobile chair for feeding?
  • Step 1: make a pattern
  • Step 2: sewing a baby chair

With the birth of a baby, his parents have a lot of worries. One of them is the purchase of a chair for feeding. Meanwhile, it is quite expensive in children's stores. In order to save on its purchase, you can try to make a high chair with your own hands. By and large, there is nothing complicated here. The main thing is to adhere to the recommendations presented, act step by step and carefully study the drawing.

The main thing to remember when making a highchair for a child is safety. The design must be strong and stable.

Making a wooden chair

Before you make a highchair, you should prepare the following tools and materials:

• saw;
• hammer;
• bars with a section of 400x200 mm;
• board (thickness 20 mm);
• fiberboard sheet;
• nails;
• batting;
• dowels;
• the cloth;
• glue;
• brush;
• sandpaper;
• gloves to protect your hands from splinters during work;
• plywood.

You will also need to purchase paintwork material. But you need to choose non-toxic. One that has an acrylic base will do. Such paints are modern and safe.

Back to index

Stage 1: we make parts

Drawing of a children's chair.

It is necessary to start making a highchair with the manufacture of parts for it. You will need to do the following:

• 4 legs (length 390 mm);
• 2 bottom rails (length 340 mm);
• 3 crossbars (length 300 mm);
• top rails (length 220 mm);
• 1 small tabletop (dimensions 200x340 mm);
• 4 rounded elements.

To make such details, you need to take the bars and cut them in half. From them, legs are first created, then the upper and lower crossbars, and then the crossbars. They will need to be treated with sandpaper to prevent splinters from appearing in the baby, because he will grab the handles for all the details of the chair.

Now you can move on to creating rounded elements for the sidewalls. They need to be cut out of the board in order to get the most durable and reliable chair, a drawing of these parts is presented.

It will be necessary to make wooden board similar markup. The scheme must be drawn so that the fibers of the material are perpendicular to the bend angle. Then the finished part will not lose its strength over time.

The back and seats need to be cut out of fiberboard. From it you will need to make 6 parts. Their size should be as follows, 300 * 250 mm. They should have two rounded corners. The ends of such parts will need to be carefully sanded. After that, it will be necessary to glue 3 identical parts together, and then put them under a press. And the last thing that needs to be done is to cut the countertop out of plywood. Its size should be as follows: dimensions 200x340 mm.

Back to index

Stage 2: we assemble the chair

Now you can start assembling the high chair. First you need to make rectangular dowels. They are carved from wood. Their size should be 8 * 20 * 50 mm. Under them in the details it will be necessary to make holes up to 40 mm deep.

They will need to be fixed with glue, and then additionally with nails. But it will be necessary to sink their hat into the surface of the wood - this will eliminate the occurrence of injuries and cuts in the child.

Diagram of a baby chair.

Start assembling the highchair from the sidewall. It consists of 2 rounded parts, legs and bottom rails. First of all, the last 2 parts are fixed together with glue, dowel and nails. Here it is necessary to ensure that the connection occurs at an angle of 90 degrees. Then you can assemble the top crossbar and 2 roundings between them. The second sidewall will need to be made similar to the first. In this case, during assembly, it will be necessary to compare both elements several times in order to make sure that they are identical. The created sidewalls will need to be processed with sandpaper.

Next, you will need to connect the seat and back together. Here you can use screws and a corner. After that, you will need to wait until the glue on all the parts is completely dry, and then it will be possible to assemble the entire highchair.

The sidewall is connected with the help of crossbars (length 300 mm) and dowels. First you need to make holes for them. Then, in addition, the structure is fixed with nails. Then you will need to attach the legs to the lower and upper slats, and then install the crossbars. A tabletop is fixed from one of the ends.

After that, the finished structure is further processed with sandpaper. Then it is covered with paintwork material and left to dry. Then you will need to cover the seat and back with fabric. But first you will need to lay a batting under it and fix it with a stapler. This upholstery will allow the baby to sit on the chair with maximum comfort. On this work on its creation will be completed. So, you can use the finished product for its intended purpose.

The difficulties in caring for children are largely due to the fact that buying everything you need can be quite a task for the family budget. Another question is whether parents manage to find exactly what they would like in stores, or in fact there is nothing ideally suitable among the assortment. Both reasons that prevent the purchase of a particular product, one way or another, suggest that it would be nice to make it yourself. For example, a high chair - if dad has enough experience with various tools, he may well make it with his own hands.

Peculiarities

Contrary to seeming simplicity, a do-it-yourself highchair is not so simple task to perform it without any preparation. Do not start work until you have a clear understanding of how the end result should look like, and what operations will have to be performed to achieve this.

Also, don't ignore the calculations. Any chair should be strong enough to withstand its “passenger”, and the child, although not heavy, will not sit neatly on it, especially since the dimensions of such furniture are also small.

Strength requirements are relevant not only for basic materials, but also for fasteners, be it self-tapping screws, glue or grooves. In addition, the baby is constantly growing, and it makes sense to make a high chair with a margin of at least a couple of years in advance. For all its strength, the product should be comfortable, that is, approximately correspond to the dimensions of the owner.

Also try to ensure the proper lightness of the furniture being made - it should be convenient for the owner to independently move his chair to where he wants to sit at the moment.

Don't forget to stay safe. Furniture, in any case, cannot be traumatic, and children's furniture even more so. No sharp edges are allowed, and if wood is the main material, as happens in most cases, then it must be carefully sanded to avoid peeling splinters. When covering the finished product with varnish or paint, give preference to natural - children tend to put everything in their mouths, and can be poisoned by a toxic coating.

Finally, remember that this chair is for a child. Apart from suitable sizes, it is desirable for a piece of furniture to be also beautiful. If complex decor is not for you, try to at least paint it in bright colors.

Drawings, dimensions, diagrams

Before proceeding directly to the manufacture of parts, it is necessary to draw up a drawing with dimensions - this is the only way all the components will ideally fit one to the other. You can use either one of those ready-made options that are already posted on the World Wide Web, or draw up a diagram yourself. It is important to note here that there are blueprints and instructions on the Internet explaining how to make a standard look table and chair, so they are usually not suitable for those who want to create something original - for example, an elephant chair.

• Drawing a table and chairs, which can be made in the form of a kit, it is not necessary to strictly follow the principles of drawing: there are not so many details in them that they cannot be kept in the head. For us, the main thing is to make sure that all dimensions converge, and the parts fit perfectly with each other, but the ways of connecting individual parts must be present on the drawing. In general, it can be presented schematically, without a high accuracy of the drawing.

• Think over the dimensions (or choose ready-made drawings based on them), based on the convenience of the child. Those chairs are considered comfortable, the seat of which is at the level of the knee or slightly lower. In the case of a highchair, it is recommended to make the seat a little higher, because the child will probably still grow. At the same time, do not overdo it: if it is difficult for the baby to climb onto the seat, then the product can be considered unsuccessful.

• Determining the size of the seat itself, keep in mind that the owner should fit freely on it, but do not make it too big - this will make the chair heavier and difficult to carry. The normal height of the back is about two thirds or three quarters of the wearer's back, making it higher than the neck is already impractical. When determining the thickness of future parts, rely only on the strength of the selected material and the weight of the child.

materials

In terms of ease of processing and environmental friendliness among the materials for the manufacture of children's furniture, wood and its derivatives undoubtedly hold the palm. Therefore, most often you can find a wooden chair. However, you can not choose any tree - here, too, it is worth considering before proceeding with the manufacture. The most popular among all types of wood is beech. They have a strength reminiscent of oak, but are easier to work with and less expensive. In general, it is hardwoods that are considered a priority. From inexpensive options birch is often chosen, linden can also be considered.

From softwood, spruce and pine are suitable for making furniture, but the resin contained in any such wood is dangerous - it can stain clothes, and it can also pose a health hazard. Regardless of the specific species, choose a homogeneous tree, without knots and cracks, with an even texture.

The material of the seat may be similar to the material of the body, or it may be fundamentally different. In order to save money and achieve greater flexibility, the seat is also made from plywood, and even from chipboard. When choosing them, give preference only to the most durable types, but remember that in any case they are inferior in terms of durability to solid natural wood.

For increased softness, the seat can be additionally equipped with a small foam cushion, sheathed with a fabric that is pleasant to the touch.

There is also such an option for sitting as made from plastic bottles - both whole and chopped. Harmful plastic, present in the form of garbage in any apartment and polluting the environment, could get a second life, especially since its strength and durability are very high. This option is still much less common due to the difficulty of securely attaching individual parts, as well as not too attractive appearance. finished product.

Colors and decor

For all its practicality and convenience, the baby will definitely not like the chair if it cannot be described with the word “beautiful”. No one makes any special chairs for teenagers, and for young children, brightness and attractiveness are very important. Therefore, do not limit yourself to only one colorless varnish or discreet monochromatic solutions. A solid color is generally acceptable only if a light or very bright shade is chosen - often it is red or yellow, the so-called "warm" tones.

If drawing is not alien to you, please your child with interesting design solutions. You can go the "adult" way, painting the frame in one color, and the seat and back in another, or you can focus on the children's desire for a bright and defiant one. The simplest option is the “rings” on the legs of the chair, any patterns and even just blots are also acceptable - provided that it looks cute and positive. Regardless of how much and what kind of paint you use, do not forget - it should not be toxic.

If you have a creative streak and a desire to complicate the task a little for the common good of the cause, you can perform a more complex decor. As an option, decorate the legs or the back of the chair with carvings, but adults would like this solution more. But for a child, an ornament in the form of one or another animal will be a chic solution. Classic variant- when the back is cut out so as to resemble an elephant, or any other animal that is cute for a child, and then painted to look more like a "cartoon" character.

Covers can also become a kind of decor. In addition to their typical functions, such as simplifying the cleaning of furniture and increasing the comfort of its use, they can also decorate the back of the chair. Ideally, they should depict the child's favorite hero, characters from popular fairy tales, or the same animals. Mom can help with making a cover for dad, especially if she knows how to embroider or has skills in appliqué fabric. If the mother does not have such talents, you can simply change the cover from the clothes on which the necessary pictures were applied by the factory method.

For the youngest children

The youngest children so far sit on the highchair for only one thing - eating. It is important and necessary to teach a child to eat while sitting, and indeed to sit, in particular, at the table. However, the features of its development at this stage do not allow the use of ordinary chairs for this. The problem lies in the fact that a simple chair does not have a back with handles, and a tiny child himself will not be able to sit on it evenly, and will simply fall.

As for highchairs, their dimensions usually do not allow you to choose a normal table for them. In this situation, a special highchair for feeding will be an excellent way out.

Such furniture should be comfortable for both the child and his mother - so far the child cannot eat on his own, so the mother will have to spoon-feed him. For the convenience of this operation, the chair is made at a normal height, or even a little higher - so that the mother does not bend over. The actual period of use of such a chair is about a year, so if you have one child and the family does not plan a second one at all, you can choose not the most durable materials for manufacturing.

In terms of manufacturing, the highchair is perhaps the most complex - it has the largest number of parts. The relatively small seat is raised high above the floor, which makes it necessary to resort to installing additional stiffeners between the legs - for improved structural stability.

Given the specifics of the child of the appropriate age, both the backrest and the railing are simply necessary - they must completely exclude the possibility of the baby falling. Moreover, the barrier should also be in front, although it has another useful function - it plays the role of a countertop on which food will be placed. The space under the tabletop is left free - the baby will stick his legs in there.

Cutting and assembling such a chair is quite simple. First, according to the drawing, two identical side halves are cut out, which are then interconnected by the seat, backrest and stiffeners using grooves, glue or self-tapping screws. Before assembly, all individual parts should be sanded to a perfectly smooth state, the finished product is varnished or painted - ready.

Models for an older child

The peculiarity of highchairs for children who have finally come out of infancy lies in a significant variety of design options, limited only by the creator's imagination. The back is still considered a mandatory attribute, but the railing is no longer there, as are the front barriers. It is not worth saving on materials in this situation - if the furniture is made with a margin in size, then the child will be able to use his high chair for many years.

The manufacturing process consists of a few simple steps:

• Think over the design to the smallest detail and draw up a drawing. Decide on the number of body parts - whether it will simply consist of two solid halves or from separate legs and separate supports for the seat, whether the backrest base will be a continuation of the rear legs or it is attached separately, and so on. Calculate everything, including the thickness of the seat and legs, provide stiffeners and additional supports for the seat in advance. Provide grooves, designate places for screws.
• If doubts about the correctness of the selected parameters still remain, try to assemble a temporary cardboard chair according to the drawing. Unfortunately, it does not have the same strength to test the product from all sides, and it differs in thickness from wood or plywood, which must also be taken into account when specifying dimensions, but you will get a visual idea of ​​​​the future product.

• Start cutting out individual parts from wood or plywood. It is advised to start with the body. Well, if there are a lot of identical parts in the set, then the subsequent ones can be cut out by simply tracing the already finished first one. If your design allows, don't put off assembly until you've cut everything out - start as soon as you have at least two pieces that need to be connected. This will help you immediately notice any design flaws, if any. After the parts are ready, sand them to a smooth state.
• When all the elements are ready, proceed to the final assembly. Do not limit yourself to one type of fastener, in particular, glue the grooves - this will significantly strengthen the product and increase its durability. Ensure that the grooves go as deep as possible - tap on the joints with a hammer to make the fastening more reliable.
• The last step is varnishing and staining.

No matter how detailed and intelligible a theoretical explanation is, it is unlikely to be compared in terms of information content with a good example, because it is better to see once than hear a hundred times.

H and the video is one of the best examples of how to make a highchair with your own hands. The master tells literally everything, including the dimensions of the parts he used, so you can even do without a drawing, just repeating what he says. The resulting chair is quite simple in design, but easy to make. You can find many other similar videos on the network, but the models there are always approximately the same, but here the process is shown in great detail and clearly.

Watch a master class on making a highchair with your own hands:

The principle of making a baby highchair, in general, is similar, but it is worth studying in more detail both because of the increased complexity of the design, and simply because another master is already talking, who can reveal some new points.

How to make a baby highchair, see the video:

Being engaged in the design of a room for a child, parents tend to purchase furniture from natural materials. But in addition to the high cost, sometimes the limited choice of options does not suit. The solution will be a do-it-yourself highchair, which can be supplemented with a table in the same design. A variety of models, simplicity and affordability of manufacturing will help to create a real masterpiece.

To create a children's chair with your own hands, you will need different materials, which are easy to purchase in the construction department:

• boards and bars for the manufacture of the seat, frame and back;
• self-tapping screws that will fasten parts;
• sandpaper of medium hardness.

From the tools for the chair you will need:

• screwdriver;
• jigsaw;
• screwdriver;
• wood cutter.

In home production, it is better to use natural materials. Chairs made of plastic significantly lose to them in terms of operational properties and other important features. First, they do not have high strength. Secondly, their safety for children has not been empirically proven. Natural wood is expensive, but such children's furniture is environmentally friendly and absolutely safe for health. Useful properties are preserved even after complete processing. Preferred types are:

1. Pine. This is a budget option. The antiseptic properties of the tree are valued. The finished product is easy to paint. The disadvantages include that, in the absence of proper care the chair and table may swell, crack.
2. Beech. Its qualities are similar to oak. Easily restored if minor damage forms on the surface.
3. Oak. Furniture for children from this array will last the longest, while it is not subject to decay even with frequent contact with moisture. Keeps attractive for a long time appearance- even a very active child will not be able to scratch it.

MDF during operation does not emit hazardous resins. The material is strong enough, the average service life is 10 years (provided that nothing is dropped on the surface, it is not hit). Therefore, when deciding to make a highchair with your own hands, it is better to refuse MDF. Moreover, the cost of the finished product is only slightly lower than that of solid wood models.

Plywood is an environmentally friendly and safe material. Easily amenable to even very fine processing, it has a low cost in comparison with natural wood against the background of a long service life. The disadvantages include a limited range of applications.

Chipboard is low cost. The disadvantages include increased flexibility and the presence of formaldehyde resins in the composition. It is not recommended to make children's furniture from such raw materials - allergic reactions may occur to it.

Instruments

Product dimensions

When starting to make a chair for a child with your own hands, it is important to take into account the following rules:

1. When sitting on furniture, the feet should be completely on the floor, the legs should be bent at the knees 90 degrees.
2. The back of the highchair is strictly vertical, fits snugly to the base.
3. The outer edge of the seat should not press hard on inner part knee.

Children's chairs are classified according to their purpose. The first group includes models for feeding. Such products traditionally come with a table. Most often they are of the following sizes:

• chair height - from 840 to 900 mm;
• back width - 450 mm;
• the height of the chair to the seat is 500 mm, to the backrest is 700 mm;
• armrest width - 400 mm.

The second group is a reduced copy of adult products. Tables for matching the height of the furniture to the height of the child will help determine the size.

Child's height, cm	Chair height, cm
Under 85	180
85-100	220
101-115	260
116-130	300
131-145	340
146-160	380
161-175	420
above 176	460

The parameters of the children's table must exactly match the dimensions of the high chair.

The seat must be able to easily support the load it is carrying. The optimal thickness is 60 mm. It is desirable to make the connecting strips of the seat frame up to 20 cm. The legs in cross section can have dimensions of 5 x 5 cm - such parameters will provide sufficient stability. The recommended length of the backrest straps is up to 20 cm. All dimensions, drawings, diagrams of a do-it-yourself highchair for feeding and other models must be drawn up as accurately as possible.

A mock-up of a future chair made of thick cardboard will help determine whether the measurements are taken correctly. Another convenience is that it is easy to make any changes to make the final product as convenient as possible.

Design selection and drawing creation

Chairs for children can be of the following models:

1. Classic options - differ from adults in size. Structurally they have the same elements.
2. Folding - characterized by a simple design, are actively used in small apartments, at cottages.
3. Growing chairs - suggest the presence of adjustment mechanisms, which allows you to use products longer.
4. Transformers - most often represented by models, complemented by shelves for feeding and footrests. There is a table at the base that can later be used for games.

The last two models have the highest leg height. This is especially true for growing chairs, which can be used from 2 to 14 years. When choosing them, it is important to carefully evaluate the quality of the design.

A wooden chair can have a solid square, rectangular or straight through (with horizontal, vertical connecting strips) back. These products support the spine well. You can also find the shape of a wide truncated cone.

To create a sketch and drawing, you will need to take measurements and decide on the purpose of the product. You can use pencil and paper, but it is much more convenient to automate the process using specialized programs. It is convenient to create “explosion diagrams” in them, which will tell you how to assemble the highchair.

An explosion diagram is a detailed design sketch of a product that allows you to disassemble the chair into individual elements, estimate their number and size.

When drawing up a drawing, it is important to put down the dimensions of each part on it. For convenience, callouts can be made on the side indicating the exact parameters of the structural elements. If you decide to use finished scheme, you can adapt it to your personal needs by changing the numbers. In this case, it is necessary to strictly observe the proportions.

Classic

Growing

Folding

Transformer

Design decoration

Natural wood products require protection from external factors. Lacquering helps to solve this problem. Experts recommend choosing an acrylic version of this material. It creates a coating that is not afraid of any childish pranks - spilled water, paints.

If you want to make the product more interesting, you can paint it. Preference should be given to bright, but not eye-catching colors. Muted light green, mint green, pomegranate, coral and others are suitable.

The materials used must not contain lead, other heavy metals, or hazardous or harmful compounds. Upon contact with a surface treated with these coatings, the child's health may deteriorate.

It is not recommended to decorate the table and chair with voluminous decor. First of all, due to the fact that he is one of the most common causes child injury. The best decoration will be hand-painted or screen-painted. For young children, applications and drawings of heroes of fairy tales and cartoons are suitable. Curly legs will look interesting. If the chair has a back, various figures are cut out on its surface with a jigsaw.

Do-it-yourself manufacturing steps

There are two main models of chairs - high and regular. On their basis, numerous modifications are created. Any of them can be done independently, with a minimum of tools.

Plywood chair and table

To make such a model, the following materials will be useful:

• plywood 9 mm;
• glue for wood;
• sandpaper, grinder;
• milling cutter;
• jigsaw;
• varnish or paint;
• mortise edge.

The scheme of a do-it-yourself table and chair made of plywood includes a certain set of details. Required items:

• support (2 pieces) - 370 x 340 mm;
• stiffening board - 490 x 270 mm;
• countertop - 600 x 400 mm.

You will also need blanks for baby chair from plywood:

• support (2 pieces) - 280 x 260 mm;
• seat - 280 x 210 mm;
• back - 490 × 280 mm.

The workflow includes the following steps:

1. Sheets are cut to size. With an electric jigsaw, roundings are made at the corners of the tabletop, backrest and furniture support. Due to this, the plywood chair will become safe even for a very small child.
2. All cuts are processed with a grinder.
3. The milling cutter selects the grooves into which the mortise edging is laid.
4. All parts of the table and chair are fastened together.

Detailed drawings and diagrams of the chair will greatly facilitate assembly. Corners can not be cut, but then you will need to purchase special plugs. In conclusion, the piece of furniture is varnished or painted.

Materials and tools

Make a drawing, transfer to plywood

Cut out pieces with a jigsaw

Remove unevenness with a cutter

blanks

Make holes for the tie

Perform pre-assembly

Lacquer

final assemble

Transformer for feeding

The design will be stable if guided by the drawings. To be accurate, it is better to use special programs, which will help you figure out how to assemble a highchair for feeding. Stages of work:

1. The bars are cut to size, all cut points are sanded with sandpaper.
2. Curves are cut out of the board using a carpentry machine.
3. In places of fixation, holes are drilled, which, in their size, coincide with the dimensions of the dowels. The optimal depth is 30-40 mm.
4. The sidewalls of the highchair are assembled. The legs are fastened to the lower crossbar; roundings are fixed to the upper crossbar; the resulting elements are glued.
5. To make the seat and back, cut 6 rectangles 300 x 250 mm. The corners adjacent on the long side are rounded off. Glue the plates in 3 pieces. Finished parts are additionally fastened with a metal strip, screws.
6. The sidewalls and cross bars are connected with the help of dowels, having previously lubricated the joints with glue. In the same way, planks are attached to the structure that will support the table top and back.

You can make a baby highchair with a soft seat. It will be much more comfortable for the baby. To do this, foam rubber 2 cm thick is glued onto the blank of the seat and back, then covered with a cloth. It is better to choose a material that is easy to wash.

The feeding table is assembled using the same technology as the chair. All surfaces after sawing must be cleaned with sandpaper. At the end of the assembly, the product is allowed to dry completely, after which it is varnished or painted.

Prepare details. Fasten 2 sides

Fix the back

Attach legs

Screw on cross bars

Attach the seat on the movable couplings

Add tabletop and armrests

Stool in the children's room

Such products are very similar to adult models. The main difference is the size. For children, the optimal height parameter is 20 cm, in rare cases - 25 cm. The seat should be 250 x 250 mm in size. The classic stool does not have a back, but if used by kids, an exception can be made. She is shaped, for example, ears or a heart.

To make a stool with your own hands, you will need a board up to 5 cm thick. The procedure includes several stages:

1. The selected sheet of wood is treated with sandpaper No. 60 or 120 to remove serifs and chips.
2. Cut material to size. Mark the attachment points.
3. Places of cuts and surfaces are treated with a sandpaper or a shlef-machine.
4. The blanks are first coated with stain, and then with varnish. If desired, before this procedure, the jumpers and the support are given a curly shape.
5. Based on the drawing, fasten all the details with wood screws.

If you put a stool on a low table, the resulting area is convenient to use for feeding a child or playing with him. The product must be placed on a level surface to prevent it from falling. For children under 3 years old, you can make a stool up to 15 cm high.

Prepare materials and tools

Mark up details

Jigsaw cut pieces

Sand the edges

Cut holes for legs

Glue the legs to the seat

Paint the product

In the form of a machine

This model is based on the Adirondack garden chair. The image, for example, of Lightning Makvin, is easy to give if you draw the face of the hero. Many do not know how to make highchairs look like a car as much as possible. To do this, add plywood wheels and cover them with stain. To work, you need a pine board 20 mm thick. The manufacturing procedure includes the steps:

1. According to the drawing, all the details of the future chair are cut out. Carefully treated with an antiseptic.
2. Drilling points are outlined, side supports are connected in turn to the front legs. Backrest crossbars, seat trims are added.
3. Supports are fixed on the front legs, on which the armrests of the chair are then attached.
4. Back straps are attached.
5. The final stage is the tinting of all surfaces of the chair.

The back of the chair can be slightly extended. This will provide an additional playing surface. It is also convenient to store books and toys in it.

General drawing of an adirondack chair

Cut details

Cover with antiseptic before assembly

Fasten the parts with bolts and screws, paint all surfaces

Armchair in the form of Lightning McQueen

folding chair

The request, how to make a children's table with your own hands so that it can be folded, is common. Models of a similar design are also popular. They are perfect for small children's rooms.

To get a folding chair made of wood with your own hands, follow these steps:

1. All details are cut out of wood, carefully processed.
2. Rails are attached to the support bars. This is how the chair seat is formed.
3. From the front legs, the backs form a frame. The slats for the back are attached to the supporting legs, and a crossbar is installed in the lower region.
4. Both crossbars are attached to the rear legs of the chair.
5. Bolted connection fix 2 frames.
6. Connect the seat of the chair to the front frame. Are drilled through holes and fixed with bolts, which provide folding.

A children's chair is a furniture option that is a must. It is easy to assemble at home, even with minimal knowledge. The quality of work is ensured by the accuracy of the drawing.

Prepare the bars and connect with bolts and screws

One of good points in favor wooden furniture, that's what's real to do wooden chair do-it-yourself feeding bowl. Naturally, in the case of twins, you will have to make two chairs at once. Note that usually home-made children's highchairs made of wood are different - classic folding, transformers and growing ones.

In this article, in the “for dummies” style, we will tell you how to make a highchair for feeding with your own hands using the example of a wooden transformer highchair. We will show two working options for a do-it-yourself feeding table-chair with drawings and dimensions, and also make some considerations about them.

ATTENTION!!! The article turned out to be long, as we write not only for experienced craftsmen, but also for beginners, as well as people who rarely do anything with their own hands. If you don't want to read everything, use the table of contents. Pop-up heading tips will help you understand what is there, and choose the right one.

If you want to make a high chair with your own hands, but not a transformer, or you know everything how to do it and love brevity, it doesn’t matter either. Over time, a link to the entry will appear at this place, where information about homemade highchairs for feeding will be collected in one heap. In the meantime, we are looking at the site map and the rubric, there are articles there.

The content of the article:

Do-it-yourself highchair - why a children's wooden highchair TRANSFORMER. MOTIVATION

One of the big advantages of children's wooden transformers for feeding is that the design of high chairs is extremely simple, so even a beginner can build them on their own. You can make such a highchair for feeding with your own hands either from improvised materials, or you can easily purchase material at a low price.

In the article do-it-yourself children's highchair, we examined in detail how a folding highchair is made. It turned out that it is done quite simply. But its relevance is very doubtful - wooden furniture is always bulky and heavy, and in two years such a high chair will have to be disassembled into spare parts and made separately for a children's table and chair.

But the chair - transformer immediately "kills" two birds with one stone: it is both a chair and a table - a desk. First, the high chair is used for its intended purpose, together with a small table, and then, after 1.5 years, it is disassembled, and the child gets a separate desk and high chair. Convenient and practical. Perhaps this is precisely what causes constant interest in a wooden highchair transformer for feeding made by oneself.

It remains only to figure out how to make such a miracle of technology on your own. And in the beginning, let's see the video of one of the craftsmen.

Do-it-yourself feeding chair or wooden high chair do-it-yourself transformer for feeding a baby getting started

Searching on the Internet on the topic of a do-it-yourself feeding chair, it will become clear that there are two options for a transforming chair.

The first option is more complicated, but for some reason it is the one that is popular on the Internet. Most likely, once someone made a wooden transformer chair for feeding with their own hands in this way, and then articles on the topic of how to make it yourself miraculously mindlessly multiplied. Because where to take the correct option is not clear. We give here the most understandable (for the author) description and sane drawings.

The second version of the do-it-yourself feeding chair is simpler and more logical, it is according to it that factory wooden transformers are made. And we also bring it here, with our own measurements.

If everything is clear with the material and you are only interested in drawings and dimensions for a do-it-yourself high chair, then immediately proceed below to the parts of how to make a do-it-yourself high chair - Option 1, and How to make a do-it-yourself wooden high chair - Option 2. A for now, since we decided to write a story in the “for dummies” style, let’s talk about the materials used.

DIY high chair - Materials

To make a highchair for feeding with your own hands, you will need wooden blocks. A board with a thickness equal to the thickness of the bar used can be added. Plywood or chipboard, self-tapping screws, glue, fabric washable upholstery and any soft filler. Well, more staples for a construction (furniture) stapler.

You can use any timber that is sold or available. It would be better if he was trimmed. So with him less fuss. Otherwise, you will have to plan it yourself and make it smooth. It is most convenient to take the size of the beam 20x30 mm.

Chipboard or thick plywood - from 10 to 15 mm thick - will be used as a table top for a desk table and a small removable table for a high chair.

The hard parts of the back and seat of the do-it-yourself feeding chair can be made from fiberboard or plywood. It is not necessary to use thick plywood, from 5 to 10 mm thick is enough. In general, plywood will be stronger, but stapler staples are easier to enter into fiberboard.

Some parts are glued together. To do this, you can use wood glue or just PVA glue.

To make a soft back and seat on a high chair with your own hands, you will need an external upholstery - a durable, easy-to-wash fabric, such as raincoat fabric or bologna, or just oilcloth, and inside a soft filler - foam rubber, batting, synthetic winterizer or something else. See for yourself how much you need. Soft filler can be glued to the hard parts of the back and seat, or simply fastened with a construction stapler, or you can combine both options. Upholstery is easier to immediately fasten with a stapler. So it will be more reliable. The size of the staple depends on the stapler and the chosen thickness of the upholstery.

It's also a good idea to have a medium sandpaper to sand the parts and make them smooth.

In the first version of the do-it-yourself highchair, only 4 wood screws are used: for attaching the tabletop to the desk-table. Other wooden details interconnected with homemade dowels, also made of wood. You can put the rest of the bars on the dowels.

In the second version of the do-it-yourself feeding chair, there are practically no dowels, but there are many self-tapping screws for fastening all the parts together. Factory transformers are made on euro self-tapping screws, and a do-it-yourself wooden highchair transformer for feeding can be assembled on any. The main thing is to assemble correctly. Dowels are used only if you decide to make rounded parts that are conveniently attached to the bars with their help.

In both options wooden table and a do-it-yourself feeding chair have rounded elements, although you can do without them. These elements can be made either from a board with a thickness corresponding to the thickness of the bar used. If the beam is taken, as here, 20x30 mm, then we take a board 20 mm thick, but 30 mm is also possible, this depends on how you put the bars, joke F). If there is no board, then the same bars are perfect. You just need to glue them together.

Depending on how much and how you arrange the rounded elements for cutting on the board or glued bars, this is the length of them (boards, bars) and you need to take. On glued bars or a board, 4 elements must be laid at once. Therefore, the length will be from 0.5 to 1 m, and maybe 2 m is not enough.

Do-it-yourself feeding chair - separate words about wood and paintwork

I propose to pay attention to the wood material of the high chair. We note right away that a children's wooden chair for feeding with their own hands is best made from linden. However, like any other children's furniture for kids. Since conifers often used in the manufacture of wooden furniture may not be suitable here: pine emits resin, which is very toxic. And it is better not to risk children's health. However, pine is often found in hardware stores, so we try to take it as dry as possible and without interspersing resin. Believe me, the child will be better, and it will be easier for you to do it yourself.

To give shine, color and environmental protection, it is better to use ACRYLIC varnish, or paint. It is not as harmful to the baby as the rest. Why exactly him? The answer is - what if the baby tries a table or a chair for feeding, which you yourself made with your own hands? You are responsible for the consequences. Although if it doesn’t matter or it’s not possible to get them, then you can cover the feeding chair with your own hands with whatever you want.

Do-it-yourself wooden transformer highchair - Option 1

To understand what a do-it-yourself highchair in the form of constituent parts option 1, here are the drawings and dimensions.

To make parts of a children's high chair for feeding a wooden transformer with our own hands, we take a bar with a section, for example, 20x30mm. From it we will make the following details. Specify the length and quantity.

• Legs - 390 mm, 4 pcs.
• Rounded parts - 4 pcs.
• Armrests, they are also the upper crossbars of the chair - 195 mm, 2 pcs.
• Planks running parallel to the armrests, they are also crossbars, 335 mm, 2 pcs. On these crossbars we will then attach the seat with the crossbars of the feeding chair
• Planks on which the seat and back are attached, they are also crossbars - 300 mm, 3 pcs. Two for the seat and one for the back
• Small table on a chair (H x W) 340x340 mm. It lies on the armrests of the chair 340 mm = 300 (length of the chair crossbar) + 20 + 20 mm.
• The seat and back are same sizes(H x W) 250x290 mm. Width 290 mm \u003d 300 (length of the cross bar) - 5 - 5 (gaps on both sides for upholstery and soft filler), mm.

• Legs 500 mm 4 pcs.
• Planks for the lower and upper part 410 mm 4 pcs. On the lower slats there is a table for feeding, on the upper slats a tabletop is attached.
• Cross bars 340 mm 4 pcs. To fasten the sides of the table. Length 340 (mm) = 300 (length of chair crossbar) + 20 + 20 (mm). This is done so that the chair gets up between the sidewalls of the table.
• Tabletop (H x W) - 440 × 380 mm. 1 PC. The tabletop rests on the upper slats and does not protrude beyond the sidewalls. Width 380 (mm) = 340 (cross bar length) + 20 + 20 (mm). Length 440 (mm) = 410 (top bar length) + 30 mm

How to make a high chair with your own hands

Work begins with a chair. To do this, according to the size, the bars are cut to the desired length. Separately, you need to make rounded parts - they connect the legs and armrests in front and behind. Naturally, all sawn parts must be made smooth, lint-free and treated with sandpaper with special care - small children are always an increased risk of injury. Therefore, to the question of how to make a highchair for feeding with your own hands, we give a pretentious answer - we work conscientiously.

Roundings for a wooden highchair transformer for feeding do-it-yourself are cut out separately - according to the drawing. For rounded parts there is one IMPORTANT moment. If you glue the bars and place the part with wood fibers in a different way than shown in the figure, then such a part may break in the most unexpected way during sawing or further operation. Therefore, the bars must be glued with wood fibers parallel to each other. And you need to place the rounded part of the highchair for feeding with your own hands along these parallels. The same applies to the board - we place the part for sawing parallel to the wood fibers of the board.

To successfully glue the bars, we use wood glue or PVA. Additionally, the bars do not need to be jointed and leveled. At the bars, you need to choose fairly even planes, position them correctly and simply press them harder with clamps. It will dry out in a day for sure.

Then, from the waste bars for the highchair for feeding with your own hands, you can make rectangular panties. Dimensions - 8x20x50 mm. In general, the length of the dowel should be 4-5 mm less than the total depth of the groove of the two fastened parts. The edges of the dowels can be slightly rounded.

On all parts, mark places for planting dowels. To do this, mark the contours of the groove, for example, with a pencil. Rectangular grooves for dowels should be made approximately 30 mm deep. To do this, drill 4-5 holes with a drill with a diameter of 6 mm. Next, using a chisel, align the walls of the groove and fit it to your own, individual, home-made dowel. And if there is a router, then we make the grooves with a router, it’s easier.

When all the details are ready, there are dowels and grooves for fastening, you can start assembling a children's high chair for feeding a wooden transformer with your own hands.

Do-it-yourself wooden highchair transformer for feeding a child - assembly

We begin to assemble a wooden high chair transformer for feeding with our own hands from the sidewalls. First one is done, then the second. On the dowels, draw a line in the middle of the length. Using a light hammer, install to the marked line. Then we take the part to be connected and insert the dowel into it. We connect the parts first dry, i.e. without glue. After all the details of the sidewalls are connected, we check for cracks. If everything is fine, then carefully separate the parts and glue the dowels, and then assemble them again, as indicated above. Then you need to pull off the parts and let dry, about 1 day. You can tighten it with clamps, or tightly wrap it on both sides with a rope. But at the same time, make sure that nothing is warped, and no gaps are obtained. It is less reliable to tighten with a rope than with a clamp, but not everyone has clamps of this size.

While the sides of the transformer highchair for feeding the child are drying, you can do the seat and backrest with your own hands. They are cut out of plywood or fiberboard, according to the drawing. If the plywood is not thick or fiberboard is used, then to give strength it is better to cut out 3 parts of the seat and back and glue them together. Lubricate with glue and clamp with clamps. It also dries overnight.

After the sidewalls, seat and back are assembled and cut out, we assemble everything completely. On the seat and backrest from the planned reverse side of the wooden highchair of the transformer for feeding the child with your own hands, you can immediately attach the crossbar strips. To do this, use either dowels, or, which will be even easier, small self-tapping screws. To get it right, the slats must be fastened with gaps of 5 mm on each side along the width of the seat and back. Backrest and seat can be connected to each other metal corner, or a metal strip bent along.

If we do it on dowels, then we drill holes in the seat for fastening to the crossbars of the chair. Mount better on 4 pcs. standard cylindrical dowels. For the back of such dowels - 2 pcs. We connect the sidewalls with crossbars on which the seat will then lie. We do it without glue to check and see the positions of the seat and back. Also, without glue, we put the seat on the crossbars on the dowels. Bending and bending the back, mark the position of the bar for fixing the back, and then disassemble. If you wish, you can cut off the side of the backrest according to the picture. No desire - everything will be fine too.

At the children's highchair for feeding a wooden transformer, we sheathe the seat and back with a soft filler with our own hands: we glue it to the hard part or nail it with a stapler. Then, again with the help of a stapler, we stretch the upholstery. It is better not to save, and do not try to fasten the upholstery and the soft part with the same bracket. Something might be skewed, and it will not be good.

Then we collect all the parts on dowels smeared with glue. We put in place, check the corners. We fasten the back bar to the back on 2 cylindrical dowels. We check the gaps and tighten with clamps or a rope. We are waiting for it to dry. That's it, a chair from a wooden transformer highchair for feeding with your own hands is ready .

We repeat. If there is no desire to mess with dowels, all parts can really be connected using ordinary self-tapping screws. It may not be as strong, but it is easier to assemble. To decide, of course, the master. And it is most convenient and most durable to fasten the roundings with the help of dowels, and then carefully coat them with glue. After that, leave the finished sidewall to dry for a day.

The last stage: we cut out, according to the size, a small table on a high chair with our own hands. It can be left rectangular, it can be rounded in the part closest to the child. It's not essential. Only a matter of aesthetics and fuss. This table is attached to the edges of the armrests. It is possible on cylindrical dowels, it is possible on self-tapping screws. And when the child grows up, he just takes off and that's it, he is no longer needed.

A table for a do-it-yourself highchair is assembled in the same way as a chair. First dry, then with glue. Either self-made dowels or self-tapping screws are used. We start with the sides. We attach the upper and lower strips to the legs, we get two rectangles. When the sides are assembled, they, like the chair, must be pulled off and wait a day until they dry.

Next, the transverse bars are attached - with their help, the sidewalls are connected. We fix the crossbars for the feeding table with our own hands according to the drawing. The general idea is that they should be at unequal distances from the edges of the sidewalls. On the lower ones, which will be closer to the edge, there are chair legs in the high chair position. And the upper ones serve as spacers for the legs of the chair, so that the chair stands firmly.

A tabletop cut from plywood or chipboard is mounted on top of the upper parts of the sidewalls and screwed on with self-tapping screws. Everything is gathered together and pulled together as usual, waiting for it to dry.

When the table and chair for feeding with your own hands are ready, we will turn it into a transformer chair for feeding the baby. To do this, we will connect them. The table is turned over, the tabletop is at the back, and the chair is placed on the transverse bars of the table.

Wooden do-it-yourself transformer table for feeding a baby - finishing touches

Finally, when the chair and table are ready, we check for roughness for the last time and sand it if we find one.

When a wooden chair and a transformer table for feeding a child are made with your own hands, they should be completely pierced - use exclusively non-toxic varnishes, or paint acrylic paint. Beforehand, to give the desired color, you can wash and dry.

Everything, the first option is ready. The most adequate description was found on http://mebelsam.com, from this site material was taken for a note on the first option.

Do-it-yourself wooden transformer highchair - Option 2

To understand what a do-it-yourself highchair will be in the form of components of option 2, we present the drawings and dimensions.

To make parts of a children's high chair for feeding a wooden transformer with our own hands, take a bar with a section, for example, 20x30 mm. From it will need to do the following details: specify the length and quantity.

DIY feeding chair dimensions of spare parts, length and quantity

If there are no rounded parts

• Legs 450 mm 4 pcs.
• Armrests - 365 mm 2 pcs.

If there are rounded parts

• Front legs 450 mm - 2 pcs., Rear 390 mm - 2 pcs.
• Armrests - 290 mm 2 pcs.
• Rounded detail according to the scheme - 2 pcs

General

• Bottom strips on the sidewalls 365 mm 2 pcs.
• Cross bars 350 mm 4 pcs. They are attached to the seat and back.
• Seat (H x W) 290x330 mm
• Backrest (H x W) 450x330 mm

DIY feeding table dimensions of spare parts, length and quantity

• Legs - 450 mm 4 pcs. The legs are located in the middle of the table, and are the lower slats of the sidewalls.
• The lower and upper crossbars, on which the table for feeding is in the position of a table-desk, and to which the tabletop is attached - 500 mm 4 pcs.
• Cross bars 410 mm 3 pcs.
• Tabletop (H x W) 500x510 mm
• Fastening straps for chair legs length 230 mm. ATTENTION - in the diagram, the thickness of the bars is 15x15 mm, but you can use any. For example, the same 20x30 mm.

Do-it-yourself wooden highchair transformer for feeding a child - The main differences from option 1

The previous part about a wooden highchair transformer for feeding a child with your own hands turned out to be too voluminous. Therefore, in order not to write a sheet again, let's say that everything is done according to the drawing and dimensions similarly to the first option.

Dowels are not used, with the exception of the rounded parts of the high chair. They are made, as well as in option 1, only they have different sizes. Everything else is fastened with screws. It can be ordinary on wood, it can be euro. If you use euro self-tapping screws, then mark the places where they should go. And in a place with a smaller diameter, we drill a hole for them.

Do-it-yourself highchair - we make parts and assemble

The bars are cut to size. Carefully processed with sandpaper. The cardinal difference from the first version of the do-it-yourself highchair is the absence of special round parts. But since sharp corners are an increased danger for a small child, they must be rounded. It is the upper parts of the chair legs that are slightly rounded on one side. And the two lower crossbars of the table are also rounded - the legs on which it stands.

You can also insert a few bars, rectangular or round, in the sidewalls between the armrest and the bottom bar to which the seat is attached, it does not matter. You can place them anywhere at any distance, most importantly in the seating area. This is so that the baby does not crawl away through the sidewall, and it will go for beauty.

One more stroke.
How to make a do-it-yourself high chair with a movable back? You can make the back of a do-it-yourself feeding chair take several positions. This will have to be dealt with.

To do this, the rear legs and armrests are fastened together using a round part, as was the case in the first version. In this case, the size of the armrest and back leg will be different (see the description of the dimensions of the chair). In the rounding, you need to make a hole where, as a result, a screw will be inserted, with a handle - a fixer at the end. The screw is attached to the back of the chair with one side, the other goes through this hole. The handle is screwed on the edge and secures it in the desired position. The back is fixed.

The hole can be made either with a milling cutter, or several small holes can be made with a drill and then modified with a chisel. The size of the hole depends on the screw used. The handle can be whatever you like. In the handle, carefully select the groove for the nut, which will actually be screwed onto the screw and fix the back of the chair. The screw itself is conveniently fixed not in the back of the chair, but in the upper crossbar.

Once again, we note that the rounding of the highchair for feeding with your own hands is more convenient and better fastened with glued dowels. On self-tapping screws it will be uncomfortable and clumsy.

Specifically for the baby, this version of the chair is very convenient, but to make it, you will have to make some efforts. If there is no desire, then it is realistic to do without a movable back, then it makes no sense to make a separate rounding. Just tilt the back as you and the baby are comfortable. We mark the place where the upper transverse bar touches the backrest and the sidewall. We drill a hole there. We fasten the sidewall and back with a self-tapping screw. So on each side.

When the sidewalls for the do-it-yourself highchair for feeding are assembled, two transverse fastening strips for sitting and one on a movable cylindrical dowel for fastening the back are screwed to the lower strips of the sidewall. A movable dowel means that one of the grooves is several (mm) larger than the diameter of the dowel.

The back and seat is done in the same way as in the first version. Only the dimensions here are slightly different - a longer back. It's more convenient for the baby. It is also not necessary to fasten the seat and back together, it is enough to attach them to the transverse slats, and subsequently make them soft and upholstered, for example, with oilcloth. Before upholstery, as usual, skin and paint.

That's it, the do-it-yourself highchair for a children's wooden transformer is ready.

DIY high chair table

A do-it-yourself table for a highchair for feeding is assembled in the same way as in the first version. Sidewalls first. When the sidewalls are assembled, they are fastened together by transverse strips located below - they also serve as supports on which the assembled chair stands. This is important as the high chair is mounted on them and plays a role in its solid installation.

This is the difference from the previous version - there is no additional crossbar in the middle at the bottom of the table, which makes the table not closed, and it is more convenient for an older child to sit at it. At the same time, two crossbars go only from below, where the tabletop is attached - there is only one crossbar. When everything is assembled, it remains to screw the countertop.

There is one moment.
How to make a table top for a transformer highchair for feeding with your own hands? The figure shows the diagram and dimensions of the variant with grooves. For simplicity, the table top for feeding with your own hands can, as in the first version, simply be put on the bars, or you can, as they do at the factory, clamp between the bars. The first option is simpler, but the screws will be visible in the most inappropriate place. The second will require more fuss, but more beautiful. To clamp between the bars, you need to make grooves in them. This is done without problems with a milling cutter, or just a chisel, but it takes longer. Accordingly, the dimensions of the tabletop will be different. The groove is washed away to make the thickness of the table top and a depth of 5 mm.

For greater stability of the highchair standing on the table, in the assembled form of a do-it-yourself highchair for feeding a wooden transformer, you can additionally make four small bars - two on each side. They are located under the countertop, it is better to put them on the "fact". Those. when the table and chair are ready, we put a chair on top of the table, as it should be in the end. Mark up with inside on the sides of the table, where the legs of the chair pass closest to the table top. On the sides, parallel to the markings, we attach these bars to the sidewalls of the table, one on each side. As a result, it should turn out so that the legs of the chair closest to the countertop pass between these bars, and they, in turn, do not allow the chair to move in different directions. This gives the chair extra stability.

The do-it-yourself feeding table is ready.

DIY highchair - summary and some conclusions

As usual, summing up, we talk about what is easier - to make a highchair for feeding with your own hands, or to buy? The answer is clear - buy. Moreover, wooden transformers are very common today and are inexpensive. But there are people who want to apply their own efforts and imagination, or maybe someone has not sorted out the rubble of their own for a long time. building materials. Then go - creativity has been valued at all times.

The first option, of course, is the most common on the Internet, but it is not the easiest. There you have to fiddle with dowels, make grooves, glue parts. It's great if there is a special large clamp, as an ordinary rope can warp the part. And the details, if you do not compress at all, then maybe nothing will work out at all. In short, take a lot. In addition, over time, such a product will definitely dry out, remember the old swinging chairs. And your child will definitely rock a ready-made highchair for feeding with your own hands.

The second option is not common on the network. But this do-it-yourself high chair looks like a factory transformer high chair. Assembled on self-tapping screws. The main thing is to ensure that during assembly the mating parts of the parts stand at 90 degrees to each other and do not warp. Take a little. Only if you want to make a movable back with a rounded element, then you have to sweat.

At one time, when they wanted to make a highchair for feeding wooden transformer with our own hands, we knew the first option. But he seemed complicated. And then, when they bought a factory one, they found its dimensions and realized that it was no worse, and maybe even better than the first option. If I had to do it myself another time, I would choose the second option.

How to make a do-it-yourself high chair video craftsmen

In principle, every craftsman makes his own transformer chair for feeding with his own hands. So to speak, according to your needs and with your capabilities. Here are the most understandable and popular videos. From them it will become clear that the beam can be of any size. The dimensions of the chair-table for feeding can also be any. The main thing is to capture the essence of the design and sequence - how to make a highchair for feeding with your own hands.

Purchased furniture for a child's room, especially from natural materials, can be quite expensive. In the store or online, there is not always exactly the option that you like. You can create a children's high chair and a wooden table yourself. The work will not be difficult if you prepare all the necessary parts and tools, use ingenuity and imagination. The reward for labor is a unique product, the most convenient for the baby and practical at home.

You can create a children's high chair and a wooden table yourself.

A chair with your own hands will cost much less, and one made according to your own sketch will meet the intended parameters and the desired degree of comfort for the baby.

The reward for labor is a unique product, the most convenient for the baby and practical at home.

All details from natural wood can be purchased at specialized departments of hardware stores. You will pick up boards and bars of the right size.

A chair with your own hands will cost much less.

A highchair created by oneself is a solid piece of furniture for a child. In the process of work, you take into account the dimensions of the seat and back, which are as comfortable as possible for a growing baby, and check the strength of the structure directly at home.

All parts made of natural wood can be purchased in specialized departments of hardware stores.

A hand-made wooden chair can be decorated to your liking, and not content with turnkey solution purchased furniture.

You will pick up boards and bars of the right size.

Necessary materials and tools

To create a chair you will need various materials. Individual parts will be made from them. First of all, these are wooden bars and boards from which the frame, seat and back are assembled. Instead of natural solid wood, chipboard or plywood can be used, but these materials are short-lived. For fastenings, take self-tapping screws in sufficient quantities. You will need sandpaper of medium hardness.

A highchair created by oneself is a solid piece of furniture for a child.

Bar dimensions (length):

• supporting legs - up to 20 cm;
• connecting strips of the seat frame - up to 20 cm;
• back straps - up to 20 cm.

A handmade wooden chair can be decorated to your liking.

In the manufacturing process for the legs, the thickest bars with a section of 5x5 cm are used. For the slats, parts with a diameter half that of the support ones are taken.

For slats, parts are taken with a diameter half that of the reference ones.

The parameters of the seat board (height and width) should also not exceed 20 cm. The back part may be slightly higher, but preferably no more than 30 cm.

• they are less durable;
• the environmental friendliness of such products is not 100% proven.

The parameters of the seat board (height and width) should also not exceed 20 cm.

To make a chair with your own hands, you need the right tools:

• screwdriver;
• screwdriver;
• jigsaw;
• wood cutter.

The dorsal part may be slightly higher, but preferably no more than 30 cm.

The assembled highchair "requires" original decor. In addition to the carving option, you can use paint or other materials to apply a pattern or application. You will need a stencil to accurately apply the image.

The assembled chair "requires" the original decor.

Deciding on design and construction

For wood products, you can come up with any option. The highchair is usually made with straight supports and the following forms dorsal design:

• solid square or rectangular;
• wide truncated cone;
• straight through (with a jumper bar).

You will need a stencil to accurately apply the image.

Creating a product with your own hands requires careful preparation. First of all, you need to make a sketch of the project. Draw a visual diagram of the connections of all parts separately with calculations of sections and lengths. Following the sketches, you will recreate the model in reality with accurate parameters. A chair, where all the thoughtful dimensions are observed, will “fit” the baby, will not create inconvenience.

For wood products, you can come up with any option.

Certain models are created with the expectation that the child sits at a common table with other family members. In this case, high legs are chosen for the product, which are not attached exactly vertically with respect to the seat and floor, but more widely. The lower part of such a chair will look like a truncated cone, connected for stability with wooden bars around the perimeter. The upper part will be about 30-35 cm below the level of the table.

The highchair is usually made with straight supports and the following forms of the spinal structure

If you have certain skills, then you can assemble a folding product. Such items are easily removed if necessary in storage places.

For selected design solution details are processed in accordance with it.

Manufacturing process: step by step instructions

After preparing the drawing with the exact parameters, we begin to assemble a simple highchair.

1. Calculate exactly according to the scheme the length of the legs, saw off the excess with a hacksaw.
2. Saw to size jumper bars that will secure the frame in the seat area.
3. Connect them to the supporting structure. For reinforcement, add furniture glue.
4. Attach the pre-fitted back and seat with self-tapping screws.
5. All parts of wood must be cleaned with sandpaper so that there are no roughness and burrs.

A chair, where all the thoughtful dimensions are observed, will “fit” the baby, will not create inconvenience.

If the parts are disproportionate, "adjust" them according to the design scheme using a hacksaw. To make the highchair created by yourself comfortable, ask the baby to sit on it, ask how comfortable he is.

If all dimensions have been determined correctly, the child will like the new furniture. To make the details smooth, go over the surface with sandpaper again.

Certain models are created with the expectation that the child sits at a common table with other family members.

To varnish the product, use only safe compositions - a special coating for children's furniture, environmentally friendly and having the appropriate certificate.

The upper part will be about 30-35 cm below the level of the table.

After finishing the exterior varnish, let the chair dry well, a day or two. Then you can start decorative trim if one is intended. If it consists in carving, then varnishing is done after the completion of the artistic processing and sanding of the parts.

Chair decoration

Use a jigsaw for carving. You can make a decoration in the form of a flower by cutting it in the center of the back, or any geometric shape. First, at the place of the future decor, make a markup with a pencil so that the thread is even. Parts such as legs and back can be carved. The corners of the seat can be rounded off with a jigsaw and sandpaper.

In the manufacturing process for the legs, the thickest bars with a section of 5x5 cm are used.

The top can also be made not strictly rectangular, but a truncated cone, rounded, composite. In the latter option, you will need additional bars and cross bars - one or two. They are fixed due to special holes in the junctions with the dorsal frame. This is a rather time-consuming process, but if you wish, you can choose this option.

For fastenings, take self-tapping screws in sufficient quantities.

All actions for processing parts must be performed before the highchair is assembled - so the work process will be faster, more convenient and more accurate.

If you have certain skills, then you can assemble a folding product.

To make a piece of children's furniture made with your own hands look more interesting, you can put a pattern on the back and seat. To do this, you need to use safe paints. The color scheme should be bright, cheerful. Simple ornaments, floral patterns, imitation of children's toys, such as cars, look great on wooden furniture.

Instead of natural solid wood, chipboard or plywood can be used, but these materials are short-lived.

Due to the fact that the size of the product is small, a large pattern will become a kind of accent that attracts the attention of the child - he will like to sit on such a beautiful chair, play or have breakfast.

In decoration, you can use applications - there are plenty of adhesive bright films on sale.

The image will turn out even if you use a stencil previously cut out of paper or thick plastic.

In decoration, you can use applications - there are plenty of adhesive bright films on sale. The image will be monophonic or multi-color - it depends on your imagination.

First of all, these are wooden bars and boards from which the frame, seat and back are assembled.

It is not recommended to use volumetric (protruding) parts, both small and large, in the decoration of the seat or back of the children's chair. Firstly, it is inconvenient for the child, and secondly, they quickly fall off with frequent use of the product.

To create a chair, you will need various materials.

VIDEO: DIY highchair