Knowing how to properly clean the tank and toilet from lime deposits and urinary stone, you will remove even the most difficult deposits, giving plumbing whiteness and cleanliness. Use soda, vinegar, Coca-Cola, oxalic acid, citric acid, or bleach. In particularly difficult cases, use automotive electrolyte or hydrochloric acid, provided that the sewer system is made of metal. Remove the water from the toilet bowl, treat the surface and leave for 20 minutes (or more, depending on the chosen cleaning method). Then carefully rub with a brush and rinse, draining the water from the tank.
A bathroom is a favorable place for the development of microorganisms. In addition, inside the toilet is deposited urinary stone and limescale spoiling appearance plumbing. Knowing how to clean the toilet bowl, you will improve sanitary conditions and restore plumbing, but the main thing is to approach the procedure correctly, since the wrong exposure will irrevocably damage the enamel.
Causes of urinary stone and limescale
If dirt and scale build up in the toilet, take immediate action to prevent bad odors and buildup of deposits.
Inside the toilet, the following types of pollution are formed:
- Urinary stone is the result of laziness and negligence of the owners. Most often, yellow nondescript spots form on the plumbing of people who forget to flush after themselves. Initially, drops of urine dry up and form a thin hymen. With repeated absence of flushing, a stronger film is formed - urinary stone. You can get rid of it only by special methods, but it is better to prevent its occurrence by carrying out prevention.
- Limescale - minerals contained in water (borehole or river, tap water). The more often you wash away after yourself, the more actively the film forms. You need to get rid of it regularly, because over time it clogs the holes that supply water to the toilet, which leads to plumbing failure.
Enameled plumbing is less prone to the formation of plaque that cannot be removed, but on rough surfaces it appears more often and more intensely.
How to restore the whiteness and freshness of the toilet with folk remedies
If going to the toilet has become unpleasant because there are conspicuous stains and an unpleasant smell inside, try cleaning the toilet with a brush. If the result did not please you, move on to more serious cleaning methods. Folk remedies are well suited for cleaning minor and old deposits in private houses and apartments that have a plastic pipeline or a local sewer / cesspool system.
How to clean the toilet from heavy limescale with vinegar
With prolonged exposure, vinegar is able to dissolve hard urinary stone and lime without damaging the surface of the toilet.
To clean the toilet:
- Plunger sewer system and pump water out of the toilet.
- Wipe dry areas that require treatment.
- Moisten a washcloth liberally with vinegar and apply to the plaque.
- After 6 hours, wash the toilet and remove the remaining plaque with a non-metallic scraper.
To enhance the effect, you can use heated vinegar essence or vinegar-soda solution (for 1 tablespoon of acid, 1 tablespoon of soda). The processing mechanism is the same as when washing with pure vinegar.
- "Mole";
- "Mister Muscle";
Flush the toilet with water, pour the product and flush by pressing the button on the tank.
Folk remedies are no less effective: ½ pack of soda, pour 1 tbsp. water (be sure to empty the toilet beforehand). After 15–20 minutes, pour a kettle of boiling water into it so that the dissolved blockages go into the sewer or street cesspool.
If there is a problem, than to clean the contaminated toilet bowl, use special or folk remedies. Use aggressive ones, like hydrochloric acid and autoelectrolytes, in extreme cases, because they are dangerous for the drain system.
Larisa , 6 July 2018 .Any good hostess knows that a clean toilet bowl is the main indicator of the sanitary cleanliness of a home. Contaminants such as limescale are not always easy to clean off. But it is this yellowish layering that makes the toilet particularly untidy. How to return your "faience friend" to its original appearance?
How to clean the toilet from limescale
Various minerals and lime present in the water linger on the surface of the toilet bowl in the form of a characteristic plaque. The hardness of water determines the rate of its occurrence - the higher it is, the faster the layering occurs. The process can take from several weeks to months. Removing a thin layer of lime is possible with conventional toilet cleaners, which are applied to its entire inner surface and left overnight, after which the plaque is cleaned with a brush and washed off with water.
Before applying any product, completely remove water from the toilet bowl and the visible part of the drain. This can be done with a plunger, any narrow container with a handle, or by soaking with a rag.
There are many special products that can dissolve the layering - Domestos, toilet duck, Santri and others. Their cost varies from quite cheap to very affordable. With their help, plaque can be dissolved very quickly without time-consuming processes. Therefore, if you do not have allergies to these remedies, then they can be used with a strong plaque that does not lend itself to folk remedies. To use factory products:
- carefully study the instructions;
- put on rubber gloves;
- remove all liquid from the toilet drain, dry the surface with a rag;
- apply the agent;
- leave it for the time indicated in the instructions;
- clean the plaque with a brush;
- close the toilet lid and flush.
A colored toilet can be cleaned with the same products as a white one, but any abrasives leave noticeable scratches on it.
Toilet duck and other industrial products are good at removing plaque and removing unpleasant odors from the surface of the toilet bowl.
If you want the toilet to retain its original appearance for a long time, take preventive measures. They will help to avoid the occurrence of plaque. And if it appears, first try some proven folk remedies, including:
- baking soda;
- vinegar;
- lemon acid;
- Coca Cola;
- Whiteness, etc.
Ways to get rid of limescale on the toilet
Factory and folk remedies differ in price and composition, but they are all based on three active ingredients: alkali, acid and abrasive.
- Indispensable means such as citric acid, vinegar and chlorine in the form of Whiteness allow you to remove a slight limescale with the highest quality. These funds can be reused if they did not work the first time. At the same time, it should be taken into account that all folk methods do not act as quickly as store-bought ones, and require considerable effort.
- If plaque has been accumulating for many months and does not respond to specialized preparations, all hope remains for potent drugs. Among them are oxalic acid and an electrolyte.
There are some effective unconventional means e.g. Coca-Cola.
Coca-Cola is not only tasty, but also effective when cleaning the toilet from limescale
How to use citric acid
- Take 2-3 sachets of citric acid.
- Pour the substance on problem areas.
- Close the toilet with a lid and wait 3 hours.
- Work well with a brush and rinse with water.
How to remove limescale with Coca-Cola and citric acid - video
Step-by-step instructions for cleaning the toilet with vinegar
To clean the toilet with this tool you will need:
- 1 cup 9% vinegar;
- 2 tsp baking soda.
Operating procedure:
- Pour vinegar into a saucepan.
- Heat liquid to approx. 40 °C.
- Add soda.
- Pour the sizzling solution onto lime-covered areas.
- After 8 hours, wash off the mixture with the plaque with warm water.
Using the products available in every kitchen, you can effectively remove limescale from the surface of the toilet.
How to clean the toilet from a strong limescale with vinegar - video
How to use White
- Dry the inside of the toilet with a cloth and soak up the water from the drain.
- Pour a bottle of Whiteness and do not use the toilet bowl for 12 hours, but be sure to close it with a lid so that harmful fumes remain inside.
- When the plaque softens, immediately rinse the product with water, and then clean the toilet.
The easiest way to clean the toilet from plaque - video
Features of cleaning the tank, lid and toilet seat
To clean the tank, first turn off the water tap, and then drain the water from the device. Use a neutral agent without acids, which can destroy rubber and plastic elements. To prevent plaque, special hard plates should be attached to the tank wall. To clean the toilet seat and lid, choose a detergent with a minimum of alkalis, acids or chlorine, because the remnants of aggressive substances can cause a chemical burn on the skin when using the toilet.
Plaque removal with oxalic acid
The substance in the form of a dry powder can be purchased at a hardware store. It belongs to carboxylic acids and has moderate toxicity. The time of exposure to the substance must be strictly observed so that it does not have time to corrode the enamel. However, this acid ensures the impeccable whiteness of the toilet bowl, even if it is used not in its pure form, but as part of any means. Before using them, you should carefully study the instructions for use and take all the safety measures indicated in it. In particular, be sure to wear thick rubber gloves.
- Take a piece of cloth and dampen it.
- Pour the powder onto the fabric and wipe all areas with lime formation (to clean the drain, the powder is dissolved in the water remaining in it).
- Wait one hour.
- Clean off plaque with a brush and water.
An effective way to clean stubborn limescale is to use pure oxalic acid or products based on it.
Electrolyte for cleaning the toilet
Battery electrolyte is one of the most effective, but also the most dangerous means of removing limescale, as it can leave chemical burns. To use it, get all the personal protective equipment - a rubberized apron, a respirator, goggles, thick rubber gloves.
- Pour the electrolyte very carefully onto areas with lime deposits, avoiding splashing of the product.
- Close the toilet lid and wait 15 minutes.
- Wash off the electrolyte together with the deposits with plenty of water.
Electrolyte - effective, but dangerous drug to remove limescale
Possible mistakes when cleaning toilets - table
| Mistakes | Their consequences |
| the acid-based cleaning agent is on the faience longer than the required time | destruction of the enamel and as a result - it is much more difficult to remove dirt on such a toilet, as they eat into the faience |
| flushing water after cleaning with an aggressive agent with the toilet lid open | spray active substance may come into contact with the skin or eyes, resulting in a chemical burn |
| toilet cleaning without protective equipment | allergic skin reactions and chemical burns |
| the use of products based on acids and electrolytes, if metal plastic pipes | pipes may partially dissolve and leak |
| leaning over the toilet too much when cleaning it | there is a risk of inhaling harmful fumes |
What to do so that limescale does not accumulate: preventive measures
With limescale, as in many other cases, sometimes problems are better avoided than solved. To prevent build-up from appearing on your sanitizer, follow these steps:
- clean with special non-aggressive products at least once a week: the frequency is determined by the number of people who use the toilet;
- always after operation it is necessary to drain the water and clean with a brush, if necessary;
- repair a leaking tank in time to avoid leaks and at the same time save on water bills;
- actual use of special tablets or anti-plaque agents, which eventually remove the layer of lime and at the same time resist the formation of a new layer;
- put oil-free wet wipes next to the toilet, which clean the seat and outside of the toilet well, but do not throw them down the drain, as this can lead to clogging.
Getting rid of limescale is a very real task, although problematic. To solve it, factory and folk remedies are used. But it is better to clean the toilet bowl regularly than to suffer later with peeling off the layer of lime.
In the absence of regular care of the toilet on its inside a layer of urinary stone gradually appears. Certainly, The best way problem solving - its prevention, however, in some cases, a person is "faced with the fact." How to clean this faience friend inside? Let's look at a few common ways.
Reasons for the appearance
Urinary stone is a build-up of minerals that get on the walls of the toilet along with urine, settling on them with insufficient flushing. Most often, it appears under the rim of the toilet bowl and in the place of stagnant water.
The sooner you start to deal with this unpleasant raid, the greater the likelihood of "victory"
The main reasons for its occurrence:
- young children in the family who often forget to flush after using the toilet;
- faulty tank;
- defects in the surface of the toilet, delaying the urinary stone;
- deterioration of plumbing with the accompanying roughness of its walls.
Ways to clean the toilet
With a strong coating, the product will most likely have to be applied more than once, coping with “stone deposits” layer by layer To remove this plaque from the surface of the toilet, the following means are suitable:
- Soda. It is desirable to give preference to caustic, but in a critical situation, even ordinary food can be used. It is applied with a cleaning sponge, after which it must be left there for 5–10 hours - preferably overnight - and washed off by brushing. When using caustic, gloves are required to avoid burns.
- Bura. It is enough to pour one cup of powder inside, then close the lid for several hours. Again, it is best to leave the substance overnight and brush or brush before flushing.
- Vitamin C. Very popular folk recipe, involving the use of two large tablets of vitamin C. The actions with them are the same: at night in the toilet - cleaning - flushing.
- Hydrogen peroxide. It is often used in a mixture with ammonia, but this method has a significant drawback - the need to apply a cleaning agent with a sponge. Subsequently, the lime layer will have to be removed by supplying large amounts of water.
- White. A common remedy, which is also poured onto a contaminated surface, left there until the morning and washed off. It is better not to apply white on plastic elements- it can hurt them.
- In especially "severe" cases, the use of hydrochloric acid, which dissolves very thick layers of plaque, will help. Gloves and a respirator mask are required here, plus it is worthwhile to close the toilet for the period of its operation and turn on the hood in it before the final flushing / cleaning, since breathing acid fumes is far from the most useful activity in life.
Prevention
To succeed in this field, it is important to follow a number of rules:
Sometimes brushing is not enough, especially in places where the cleaner is washed away by water and you have to use your hands and an abrasive sponge. - Cleaning frequency. Clean the surface of the toilet regularly - and at least once a week. It is not necessary to leave the selected remedy for a long time: half an hour is enough for prevention.
- Tank. The amount of urinary stone depends on the volume of water leaving the sewer system. It is important that the tank does not leak, and the float does not “move out” to the side. V last resort you can put several in the tank plastic bottles by filling them with sand: this will reduce the amount of incoming water.
- Water softening tablets that reduce the amount of urinary stone formation. They are placed in a tank and provide a light coloring and aromatization of water.
There are rules in housekeeping that remain unchanged for many generations of housewives. A clean toilet is just one of those. However, maintaining the radiance of plumbing is quite troublesome, even with the huge amount of cleaning products that are offered by the modern market for such products. It is especially difficult to get rid of a urinary stone that turns your toilet into a cluster of mineral growths with a disgusting smell and gray-orange smudges on the surface of the sanitary ware. How to clean it at home?
Where does urinary stone come from in the toilet
In fact, this is a mineral deposit that forms on the walls of the toilet bowl, under the rim and in the place of stagnant water due to the fact that drops of urine fall on the surface. The growth of a urinary stone occurs because
- after using the toilet, not everyone remembers to flush (this problem is especially relevant for families with small children - kids often forget to flush after themselves);
- a leaking tank contributes to the spread of mineral deposits;
- defective plumbing, for example, with an uneven, embossed surface, provokes the accumulation of microbes, dirt and plaque;
- the toilet is too old, which means it is prone to all kinds of damage.
Such a stone is not only an aesthetic problem. The fact is that if you do not fight the build-up, then it can grow to the point that the lumen of the toilet bowl narrows and sewer pipes. That is why it is necessary to start the fight with the stone immediately.
How to clean a urinary stone inside the toilet bowl at home
There are several options for removing urinary deposits from the toilet. First of all, this is a mechanical method: the stone is cleaned from the surface with a knife, a metal brush or sandpaper. However, this option is only suitable for old toilets, that is, “when there is nothing left to lose”: such processing will certainly leave scratches that will grow even stronger over time. So for effective fight solutions remain. These must be acid-base compounds. These can be found in the lines of professional cleaners or make your own.
Preparatory stage
Regardless of the choice, the surface for cleaning must be prepared.
Instruction:
- Drain the toilet and scoop out the rest. To do this, it is convenient to use a bucket with a long handle. This is very important point, since any cleaning agent will be much more effective if water does not interfere with its action.
- We put on gloves - acid-base solutions are very aggressive to the skin.
store funds
Popular among consumers
- powders (abrasives) for cleaning - Pemolux, Komet;
- gels (they corrode the stone as much as possible due to the fact that they slowly flow down the walls) - Domestos, Toilet duck;
- creams (may be combined with powders) - Cif.
Empirically, the three leaders in removing the stone from the drain, from under the rim and from the bottom of the toilet were determined.
Table: the most effective commercial urinary stone removers
Before applying the product, you need to carefully study the instructions and follow them carefully (especially regarding the duration of action!), Otherwise, you can damage the toilet bowl coating and the integrity of the pipes. And one more important nuance: after one cleaning, it is unlikely to get rid of the urinary stone. So the procedure will have to be repeated several times, depending on the degree of neglect of pollution, and then carry out regular preventive cleaning. By the way, the latter is relevant for any option for removing the build-up.
It is interesting. It is better to entrust the care of the enamel of colored toilet bowls to industrial products. Some manufacturers even supplement the instructions for use with a cleaning point for colored plumbing. But home cleaning methods can give unpredictable results, since it is very important chemical composition enamel, which was used in the manufacture of such a designer toilet model.
improvised means
In the matter of cleaning the toilet, improvised means can be called radical, since they work very effectively, but require even more careful handling. So thick rubber gloves, a respirator (if possible) and a brush (but definitely not metal!) Will be relevant. Here's what it looks like modern rating the most efficient and quick ways stone removal.
First place - electrolyte for batteries
Please note that this method only applies if the system has metal pipes, since plastic can be severely damaged by such cleaning.
Instruction:
- After carrying out the preparatory procedures, pour a little electrolyte on the problem area.
- We leave for 1.5-2 hours.
- We clean the plaque with a brush, wash it off.
It is interesting. An alternative to the electrolyte is hydrochloric or phosphoric acid. For processing, a 33% solution is used, the action time is 15 minutes. But acid will corrode plastic pipes.
Second place - bleach
In this cleaning option, there is one indisputable advantage - after the procedure for removing growths, the surface of the toilet bowl will dazzle with its whiteness.
Instruction:
- Pour a bag of bleach into the toilet.
- We leave the remedy for the night.
- We clean the remnants of the build-up with a brush, wash it off.
Please note that bleach also neutralizes harmful bacteria. An alternative to packaged bleach is "Whiteness". Usually one cleaning takes a standard bottle.
The disadvantages of this method include the duration of exposure, as well as some inconvenience: it is very problematic to pour bleach under the rim of the toilet bowl, so “Whiteness” remains.
Third place - oxalic acid
A white powder, which can be purchased at hardware stores, does an excellent job with old and stubborn urinary stone stains.
Instruction:
- Pour the acid into the drain (or use a cloth to “fix” the powder under the rim).
- We leave for 1-2 hours.
- Rinse off, brushing off residue.
Vinegar, soda and iodine
This composition is easy to apply under the rim due to its consistency.
Instruction:
- Slightly heat up 1 tbsp. 9% vinegar.
- Add 1 tbsp. l. baking soda and 1 tsp. iodine.
- Mix and pour into the toilet.
- We leave for the night.
- We clean the surface with a brush, rinse.
It is interesting. You can only use soda: it will not be able to completely get rid of the stone, but it will perfectly prepare the toilet bowl for further “war”.
Anticalc
Means in the form of a powder for removing scale, limescale, urinary stone deposits; sold in hardware stores. The application is the same as for bleach. Works well on not too old growths.
Lemon acid
This a good option remove small growths; for old ones, citric acid will be ineffective. But this way you can only remove the stone in the drain, but to clean the walls and the rim you will have to pick up something else.
Instruction:
- Pour out 3-4 packets of lemon.
- We leave for 4-5 hours.
- We clean the deposits with a brush, wash off.
Coca Cola and Sprite against urinary stone
The action of carbonated drinks such as Cola, Sprite or Fanta is based on their high content of citric acid. Pour 2-3 bottles of the drink into the toilet, leave for 2-3 hours, clean off the plaque and rinse.
It is interesting. As with citric acid, drinks will only work on small deposits. Many cat owners use Cola to remove stone from the walls of the pet's tray, as other means adversely affect the animal's sense of smell. Although experienced cat lovers advise a more drastic way to deal with deposits - replacing the tray.
Video: how to remove a urinary stone with Pepsi
Prevention
In order not to have to look for means to combat old deposits, it makes sense to take care of weekly prevention.
It is interesting. The rough surface of sanitary ware is prone to urinary stone growths, while on glossy walls with regular cleaning there are no such problems.
In order to negate the chances of deposits in the toilet, you can apply
- tablets that are placed in cistern- fight growths under the rim;
- gel blocks that are fixed under the rim - prevent the growth of stone in the drain.
In addition, it is worth remembering the weekly cleaning of the “white friend”, as well as the need to maintain the drain in working order, that is, to prevent leakage in a timely manner. And, of course, you should not clean the plumbing with metal brushes or pour hot food into the toilet - all this provokes the formation of microcracks, from which it is very difficult to completely clean the urinary stone. Another important preventive measure- the absence of stagnation of urine, that is, it must be washed off after each trip to the toilet.
It is possible to clear the "white friend" of urinary stone at home. True, it must be taken into account that acid and alkali should not be recklessly poured into the toilet if the pipes in the house are plastic. In this case, it is better to use more gentle cleaning methods: soda, anticalc, etc., or use professional plumbing care products.
The appearance of urinary stone and limescale is not a one-day process. It is unlikely to harm health, but it is quite likely to harm sanitary ceramics. In addition, the sight of a dirty toilet or sink can spoil the whole picture of your immaculate bathroom. Today we will tell you how to deal with the worst enemies of sanitary ware and earthenware in ordinary, home conditions.
Causes of deposits
In order to pick effective method to fight deposits on sanitary ceramics (faience), you first need to find out the reasons for their appearance, composition, etc. The proverb “You need to know the enemy by sight” is also appropriate in our difficult task.
Plaque not only spoils the appearance, but also destroys the enamel of the plumbing device
Limescale is a deposit of minerals, which are found in excess in tap water, on the surface of ceramic and chrome products. Basically, pollution is formed in the places of flushing in the form of yellow-orange smudges. Moreover, the more often the water in the toilet is flushed, the faster the plaque forms.
Important! If plaque is not removed from the water supply nozzles in time, deposits can cause them to become clogged. Keep track of the status of each of your "home assistants".
A urinary stone is a deposit of minerals found in the human body. They are excreted along with the urine and settle on the walls of the ceramic product. Combining with the minerals contained in the water, they form a dense and very unaesthetic layer of gray-yellow color. Irregularities in the ceramic coating exacerbate and accelerate this process.
If ceramics are initially of poor quality, then plaque forms on it faster due to the porosity of the material
When choosing sanitary ceramics, check the smoothness of the inside surface of the bowl. The ideal option is the purchase of a product made of sanitary porcelain, unlike cheaper faience, it has a dense structure. This is achieved through elevated temperature at which the product is fired. And it is the density that makes porcelain toilet bowls smoother, and plaque and stone do not so quickly eat into the structure of porcelain, so it is much easier to clean it with your hands.
It should be understood that sanitary china is a material for the manufacture of elite sanitary ware, therefore its price is much higher than that of faience models. Whether to attribute this feature to the minuses is up to each user to decide independently.
Porcelain product
The main reason for the appearance of deposits of any kind is the neglect of preventive methods for cleaning ceramics. It should be remembered that the more often the scheduled cleaning of the toilet room and the cleaning of plumbing is carried out, the longer the toilet remains in its original form.
Cleaning with improvised and folk remedies
To clean the toilet, sink or shower tray from plaque, it is not necessary to run to the store and spend money on expensive chemicals. In addition, effective substances are expensive, and you don’t want to spend money on ineffective ones. In order to save yourself from unnecessary waste, and the toilet from limescale and urinary stone, you can use improvised means that any housewife always has in her arsenal. So, several ways to clean plumbing, borrowed from the people.
Lemon acid
The main enemy of lime deposits is citric acid. It very effectively fights deposits that have not reached their critical point.
Citric acid is an excellent plaque remover
For this you need:
- purchase 3-4 sachets of the substance;
- apply to contaminated places;
- close the toilet lid;
- wait 4-5 hours (better until morning);
- rinse off the water, carefully treating with a brush.
For greater efficiency, you can repeat the procedure several times.
Acetic acid
Works the same way as lemon. But for its use, vinegar essence must be prepared:
- measure 250 g of vinegar essence or food vinegar 9%;
- heat the liquid to 45-50 ° C (be sure to cover the container with a lid to avoid a pungent vinegar smell);
- pour warm vinegar into the toilet;
When working with acetic acid, do not forget to protect the airways with a bandage.
- for efficiency, you can add a little baking soda (2-3 tsp);
- be sure to close the toilet bowl with a lid;
- leave for 2-3 hours or overnight.
In the morning, rinse the bowl thoroughly with water and rub it with a brush or other brush.
Oxalic acid
This tool is now receding into the background and comes across on store shelves less and less. But if you met him on modern market- feel free to buy because it is cheap and effective way restore the original whiteness of your ceramics. It is necessary to apply the product on a slightly damp soft cloth or sprinkle on the places where the urinary stone and plaque are deposited. Feel sorry for the substance is not worth it. After treating mineral accumulations, clean with a brush and rinse thoroughly with clean water.
Oxalic acid will clean the surface of the toilet in a short time
Baking soda
This drug is in the kitchen of everyone. With the help of soda, you can enhance the effect of acid, acetic or citric. Soda that has fallen on contaminated areas destroys the structure of minerals and completely removes plaque from the surface of ceramic products. To clean the toilet, you will need at least 200 g (1 pack). For greater effectiveness, it is better to leave the drug to work all night. In the morning, all that remains is to brush the bowl with a brush, cleaning off the remnants of mineral deposits.
Coca Cola
No matter how strange it may sound, this wonderful drink can not only quench your thirst, but also remove old limescale. To do this, pour 1-2 liters of liquid into the bowl and leave overnight. How the cleaning properties of Cola were revealed is unknown, we can only assume that the drink was poured into the toilet by a caring mother, who later discovered that he "ate" all the deposits.
Important! Although improvised means do not have a high concentration of acids or alkalis, it is necessary to work with them with gloves. And when using vinegar, you need to take care of the respiratory tract.
Some housewives even use Cola to remove plaque.
Chemistry on guard of purity
Improvised substances can clean non-critical pollution. When lime deposits more like a toilet cover, and the formation of a urinary stone has acquired a dark brown hue, folk remedies are useless. Only heavy artillery in the form of powerful chemical cleaners can cope here.
Very important! With caustic chemicals it is necessary to work only in rubber gloves! Do not neglect safety when using!
It is best to use specialized detergents that are designed only for toilets. Be sure to read the product label before use.
After keeping the product, be sure to brush the bullshit
With critical and extremely abundant growths of mineral deposits, you can use a liquid electrolyte, which is used in car batteries. Use it only as a last resort, when other means have not brought results. It contains sulfuric acid in its composition, so do not forget to take care of your own safety.
Preventive control measures
Everyone knows that it is much easier to prevent the appearance of pollution than to look for means to combat it. In order to prevent the spread of deposits of lime and urinary stone, you need to use a few tips:
If the toilet is kept clean, there will be no need to use caustic chemicals. With proper care, your ceramics will shine clean for a long time.
How to wash the toilet from plaque and rust: video
How to remove plaque: photo
