Water procedures outdoors are very useful, so many adherents of relaxation and hardening decide to make a summer shower for a shower in the country with their own hands, or at least install a finished booth on the site. This article will help you understand the design features, choose the right size and installation location, draw up a preliminary diagram and complete all stages of construction without errors.
Types of autonomous toilets. Choosing a site for building a toilet on suburban area
If it is planned to build a capital shower for a do-it-yourself brick cottage, it is advisable to use belt type foundation. A trench is formed along the perimeter of the future building. The optimal depth is 0.5 m. Next, the formwork is installed. At the bottom of the trench, it is necessary to form a sand-gravel cushion with a thickness of 0.1 m. After that, reinforcement is laid and concrete is poured. This must be done so that in finished form the foundation rises above ground level by about 0.1 m.
When the base is completely hardened and dry, it will be possible to begin the construction of the sewer system.
How to organize a drain system in the shower in the country with your own hands
There are several ways to organize a waste system in a shower stall. The choice of construction technology depends on several factors:
- type of soil on the site;
- type of foundation;
- the number of people living in the house.
If as a foundation for a summer shower in the country house is used monolithic slab, then before filling it is necessary to lay a system of plastic pipes with a knee. The plate is formed in such a way that on all sides there is a slope towards the drain hole. The sewer pipe is brought out of the shower room and connected to the general sewage system. You can bring the drainage to the drainage well.
Useful advice! For the construction of a similar sewer for a booth installed on a different type of foundation, it is not necessary to fill the floors with concrete. It is enough to buy a summer shower for giving with a pallet made of acrylic. This element will serve as the floor.
With connection to sewer system – best option for a large family, since the pit will not be able to accommodate the volume of drains that will be formed during operation. If the design is designed for 1-2 people, it will be enough to drain directly under the booth. But this type of system is suitable for areas with a loose type of soil, when the shower is installed on a columnar or pile foundation. This option can also be used on a tape basis.
First you need to remove a layer of soil with a depth of 0.5 m. The formed depression is filled with gravel or stone to half its height. The rest is covered with crushed stone with a fine fraction. After the cabin structure is assembled, a pallet made in the form of a wooden lattice is installed on a layer of rubble. The system is designed in such a way that wastewater passes through the drainage layers and gradually soaks into the soil.
Sometimes the owners of summer cottages bring the sewer into the garden, which cannot be called a good solution. If you still resort to a similar method, it is desirable that the place where the water drains is well warmed by the sun. Otherwise, the liquid will accumulate, and a swamp full of mosquitoes will form around the shower.
Making a cabin for a summer shower: photo and construction technology
For the construction of a cabin for a homemade shower, any available materials can be used.
Suitable for these purposes:
- wood;
- polycarbonate;
- corrugated board;
- brick.
Each type of material has its own advantages, features and properties.
How to build a shower in the country with your own hands: economy cabin
There is a little trick that will help you achieve savings in the process of building a shower house. To reduce costs, it is enough to use one of the blank walls of the building as a side for a booth.
Before you build a budget-type summer shower, you need to fix a small water tank equipped with a watering can on the wall. Here you can also install elements related to comfort, for example, hooks for clothes, shelves, etc. At the top of the future structure is a partition. It is fixed on the wall of the building. As front door a tarpaulin or film (necessarily opaque) can be used. The curtain is suspended with rings.
The floor is arranged so that the drains are diverted as far as possible from the foundation part of the house. To do this, a platform is concreted or you can get by with installing a pallet made of acrylic.
Useful advice! If you use the inner corner of the building, which has an L-shape, you can generally avoid the construction of the sides of the booth. Their function will be performed by the walls of the building.
Building a wooden cabin for a country shower with your own hands
The most common version of a country shower is a cabin made in the form of a wooden house. This type of building is considered one of the most affordable. Wood is easy to process. At the same time, it perfectly retains heat, which is a definite advantage if the shower is to be used in cold weather.
For the construction of a summer shower in a private house with your own hands, it is advisable to use a wooden beam. For the manufacture of corner posts of the booth, a material with a section size of 10x10 cm is required. A tank for 200 liters of water is installed in the upper part of the shower, so the beam must be thick enough to withstand such a weight load.
To hang the door, you will need to install two additional racks in front of the booth. These elements are placed between the corner posts. For their manufacture, you can take a bar with a section size of 5x5 cm.
To form a small slope angle for shed roof cabins, it is recommended to install the front corner posts 0.2 m higher than the rear ones. This is not required if a square-shaped tank is used as a container. In this case, the racks are mounted on the same level.
All supports are attached to the wooden frame of the lower trim. For fixing it is necessary to use hardware and metal corners. At the top of the structure, strapping is done in a similar way. You can use spacers to secure the racks more firmly. On the upper trim of the frame part of the booth, a basis for mounting the container is formed. In this case, you need to read not only the size, but also the shape of the tank.
For sheathing the frame part of the building, you can use a board 2 cm thick. This material is also suitable for making a door. It is necessary to lay the boards in one row and knock them together with the help of two jumpers. To prevent the door from skewing, the structure can be strengthened obliquely using a long rail. door frame for a country summer shower it is made of boards, the thickness of which is 4 cm. It is recommended to use self-tapping screws as fasteners.
When the booth is completely ready, it can be opened with a colored varnish composition. WITH inside the entrance is curtained with a film, otherwise the doors will swell from moisture.
Useful advice! Often, a large barrel for a shower in the country is used for construction. By installing a watering can over the structure, you can get a budget version of a wooden booth.
Polycarbonate garden shower technology
Since wood is subject to deformation changes under the influence of moisture, many site owners are thinking about how to make a shower in the country with their own hands from more practical and resistant materials, such as polycarbonate. The frame part of the cabin is made in the same way as in the case of a wooden shower, however, a metal profile must be used as the material. The optimal section size is 4x6 cm.
The frame part of the cabin is formed with the help of racks and jumpers between them. In this case, are used metal elements, therefore, to fasten them, it will be necessary welding machine. Moreover, the assembly order can be performed in several ways. In the first case, the frame part is welded separately, after which it is installed on the base and fastened with anchor bolts. The second method involves concreting racks during the pouring of the foundation. Then the strapping is formed, spacers are attached.
It is desirable to use as a covering for a shower made of polycarbonate sheet material 1 cm thick. It is fixed on a metal frame with the help of hardware, which must necessarily have sealing gaskets.
Installation of the tank and features of the construction of a shower in a country house with heating by one's own hands
At the last stage of the construction of the shower, a tank is installed. The container can be made independently using any container made of stainless steel or plastic. To do this, it is necessary to form a hole in the bottom, the diameter of which is 1.5 cm. A pipe segment with a thread on both sides is attached to it with the help of nuts. The length of this element should be 30 cm.
In the roof of the booth in the center, you need to make a hole where the pipe will be inserted. After installing the tank, a tap and a watering can made of plastic are screwed onto the free end. Then the container is firmly fixed on the frame of the frame part of the booth, filled with water and covered with a lid.
To create a summer shower with heating for a summer residence, it is enough to install a heating element in the tank. Of course, the natural energy of the sun can be used to heat water. In this case, there will be no electricity costs. However, the sun's rays are not able to heat a large volume of liquid. In addition, not every region has the necessary climatic conditions.
On the network you can find many schemes necessary for connecting a summer shower for a heated cottage to electricity. The advantage of these devices is that the water warms up in the tank quickly enough, regardless of the time of day and the weather outside. At the same time, a person can adjust temperature regime. If you attach a piece of foam to the hose, the warmest water will flow into the watering can. For the same reason, liquid is taken from the upper zone of the tank.
Useful advice! To speed up the process of heating the liquid, you can add a coil to the circuit.
Is it possible to buy a summer shower for a summer residence inexpensively: prices for finished structures
To simplify the construction technology, you can buy a ready-made outdoor shower and install it on a prepared base. The cost of cabins is varied and depends on various factors.
The following points affect the price of products:
- material of manufacture;
- modification (presence of a locker room);
- the shape of the water tank (in the form of a barrel, a square tank);
- complete set (availability heating element, tank, temperature sensor, etc.);
- tank capacity;
- the material from which the water tank is made.
Average prices for finished structures
| Name | price, rub. |
|
Metal frame and PVC fabric |
|
|
garden shower |
|
|
Garden shower with water heater |
|
|
Garden shower with water heater and dressing room |
|
|
Polycarbonate construction |
|
|
Cabin with 130 l tank |
|
|
Cabin with 200 l tank |
|
|
Cabin with 130 l tank with heating |
|
A wide variety of materials suitable for construction, as well as manufacturing technologies, allows any summer resident to acquire a comfortable and convenient shower in the country. Moreover, you can make a booth yourself from improvised means or purchase it ready-made in a specialized store.
Nothing relaxes so much after a hard day's work in the country as a summer shower. Water not only calms, but also refreshes, distracts from unpleasant thoughts and relieves stress. But what to do if there is no shower on the site? If there is no desire to splash in a trough or basin, you need to take care of comfort in field conditions and design a refreshing summer shower for your favorite dacha with your own hands, using finished photos and drawings.
How to build a summer shower with your own hands
Summer shower occupies one of the first places among all summer cottages. Sometimes this is not just a way to wash up after a day of cultivating the land has come to an end, but also the only way to cool off in the heat.
First you need to choose a place to install a shower facility. To do this, you should study your site for secluded places.
On the other hand, this place should not be far from the main building, so that you do not have to freeze on the way to a warm house if you decide to take a shower on a cool day.
Advice! If a solar heated tank is foreseen, make sure nothing is obscuring the water tank.
After you have found a suitable place, choose the optimal dimensions for your cabin. Please note that a person needs a room of at least 1 m 2 for ease of movement. If a dressing room is planned for changing clothes and storing dry things while bathing, the building is increased by another 60-70 cm. The height of the shower cabin is approximately 2.5 m. So, the estimated dimensions of the shower for giving are 170x100x250 cm.
If the structure is supposed to be wooden, then the next stage of construction will be the construction of a frame from wooden beam or metal corner.
Next are the walls. Please note that for better ventilation, the walls should recede from the ceiling and the pallet by at least 20-30 cm. The walls are built mainly from the materials that remained during the construction of the main summer cottage.
Water supply in the country shower
When installing a shower for a summer residence with your own hands, it is imperative to provide for the supply and discharge of water in advance. The drain system is laid at the stage of foundation construction, and the supply of clean water is organized during the installation of the tank.
In summer, along with beautiful sunny weather and bright colors from plants, we get the need to take a shower more often than usual. In addition, swimming in the fresh air under the streams of fresh water is a real pleasure, especially if you live in an apartment and went out into the countryside. On cold days, when the water is not heated enough from the sun, you can make a heated shower.
As always, the most ingenious is simple. In our case, making a summer shower with your own hands is very simple; nevertheless, there are many options for implementing the idea.
Summer shower options for giving
Let's start with materials. It is realistic to assemble the frame from any beams, whether it is a metal-profile pipe, or wooden beams. The walls can be from a wide range of materials, here are examples: sewn up with wood, profiled metal sheets. The best quality and price converge if the summer shower is made of polycarbonate, but you can even use an opaque oilcloth or tarpaulin stretched over the frame.
OPTION #1
More expensive, but also more reliable, will be a brick or building block shower. The structure can be made combined and a toilet can be built nearby, as can be seen in the photo. Masonry can be lined with any material available for this.
OPTION #2
To assemble a shower from a profile pipe, welding is most often used, but if you do not have the opportunity to use it, then you can fasten the beams through holes and bolts. In order for the corners to become rigid, a “scarf” plate or a diagonal strip of metal is attached to them. Such frames look good covered with tarpaulin or oilcloth, as can be seen in the photo.
Also, corrugated board can be easily attached to the tighter metal base, which will add reliability to the structure in many moments.
OPTION #3
In building hypermarkets, you can find a ready-made shower for outdoor conditions. But there is an opportunity to save money and make a summer shower with your own hands. The general concept has already been described above - the frame is made of corrugated pipe, and the casing is made of polycarbonate. See photos for original examples.
Such designs are designed for the use of a summer shower storage tank, heating will be carried out due to the flat shape of the tank.
OPTION #4
Another interesting solution there will be a combination. For example, three walls can be made of rigid material, sewn up with wood or a sheet of metal or polycarbonate, and the fourth wall can be a screen of opaque film. Unfortunately, it will not work to immerse a water tank on such a design, and therefore water can be let in from a home water supply.
This can simplify the task of providing shower water and heating. Thus, with your own hands, you can make a shower with heated water from a home column or boiler.
OPTION #5
A shower similar to the previous one can be made by attaching it to the house, or rather to its wall. Cover the wall with a material that will not allow water to penetrate the wall and bring the pipe for the watering can to a height of about 230 centimeters. In this case, the frame is not needed at all, but if the open version does not suit you, then you can make a screen or curtain that will move along a curved pipe. The floor can be laid out with tiles or other convenient material, having previously made a drain.
OPTION #6
If possible, you can lay out shower enclosures from natural stone. This solution fits perfectly into landscape design the entire area. In the variant in the photo, water is supplied from a domestic water supply, since the presence of a barrel can disrupt the aesthetics of the building. The stone was laid out without mortar, because its flat shape allows the whole structure to stand securely.
OPTION #7
A budget option for a summer shower is the use of materials from tree branches. The frame can be made from thick and even branches, and the walls from bending vines or long branches.
This option is not only quite cheap, but also looks original. The water supply due to the fragility of the frame is carried out from the water supply.
Finished blocks and prices
Factory-made outdoor shower cabins have a lot of variety. First of all, they can be made in different colors, since the colors of polycarbonate and corrugated board can be different. Also, the lining can be made of synthetic fabrics, for example, from a film or tarpaulin. You will also find two configurations: with and without a locker room.
On average, the prices for cabins packed in an awning are 15 thousand rubles. The package includes a tank with a volume of 200 liters. If you want to have a locker room, then the amount will be about 18 thousand or more.
The same options, but with polycarbonate walls and a heated tank, will cost 20 and 25 thousand rubles, respectively.
Of course, these prices are approximate and you can find the exact figures in local hardware stores.
What do you need to build an outdoor shower with your own hands?
Earlier we already talked about the materials from which you can make a shower stall, the frame is best made from a professional pipe; sheathing has a wide range of materials to choose from: profile flooring, polycarbonate, awning and even oilcloth. When choosing a material, consider the tools that you have for installation.
Also consider the durability of materials. For example, polycarbonate will retain its properties longer than wood, but it does not respond well to high temperatures and harder to assemble.
Preparation plan
- Drawing and plan. On average, a shower cabin on the street is made with dimensions of 1000 * 1000 * 2200 millimeters. Such dimensions allow, inside, to feel comfortable for the average person. At the request of the owner, the width and length can be more, but in no case less. Reducing the parameters will create difficulties in accepting the procedure. And this height is due to the fact that the part will take away the lunge of the watering can from the ceiling and the pallet.
In addition, the drawing will be useful if you decide to include a dressing room or other extensions in the building. Such a calculation will help to avoid additional costs and be fully prepared for construction.
- The choice of material for the frame. It is recommended to use metal: corner or profile pipe. For the frame, you will need a corner 50 by 50 millimeters or a professional pipe 40 by 20 millimeters. Calculate the footage of the blanks based on the dimensions of the shower: height, perimeter and length. Also consider tank dimensions when designing frame dimensions. The structure must be strong enough to bear the weight of the full container. In addition, such material will last much longer than any tree. Maintenance is minimal - touch up in time to avoid rotting.
If choice will fall on a tree, then in order for it to fulfill its role for a long time, it must be treated with special moisture-resistant agents, and then with paint or varnish. The part of the tree that will be in the ground must be covered with bitumen or resin.
- Cladding material. The list to choose from is very large, but the most practical and most popular are brick, corrugated board or polycarbonate. All these types differ in the way they are assembled and how they need to be serviced: for brickwork: you will need a solution, after which it would be useful to varnish it on the inside; it will be enough to attach the corrugated board to the bolts, having previously drilled holes; polycarbonate is also bolted, but it will already need washers.
- Water source. Equip your shower with a capacity that is sufficient for the use of all those living on the site. On average, 20-30 liters of water are required per person (fortunately, the choice in stores is huge). Since the weather can bring surprises, heating will not be superfluous. It is possible to equip your tank with electric heating using a heating element. If possible, run water supply from the house to the shower, this will allow the use of water heated by a boiler or gas water heater.
- Roof. The important part, because while you are swimming, there will be a rather heavy load on top. In order not to be injured, the material must be rigid. As a roof, it is better to use slate or corrugated board. Polycarbonate under a large load will simply burst.
- Drain. Drainage is best done about two meters from the structure. This will help prevent bad odors. Convenient parameters for the pit will be 500 millimeters in diameter and 1000-1500 deep. The walls and drainage are poured with concrete using formwork.
- Tools and consumables. At a minimum, you will need: a hammer, a saw and a hacksaw, a grinder, a drill. For bonding metal frame welding is well suited, and for it you will need electrodes. You will also need to acquire nails, bolts, drills with a diameter corresponding to the bolts.
You will also need a watering can, a mixer, if supply is provided hot water, adapters, nozzles, pipes and hoses for water supply.
Sequence of operations
To assemble a shower cubicle, you must:
- According to the drawing in the photo, we weld or assemble with bolts, parts of the frame. When assembling, take into account the loss in length.
- We put the halves vertically and connect them using welding seams or the same bolts.
- We pour the screed-concrete and control that the legs plunge 10-15 centimeters into the screed. Using the level, make sure that the structure becomes even. For a brick building, concrete and screed are poured. For draining, a plastic pipe is used, which must be placed in concrete during the pouring process.
- After the concrete has hardened, proceed to the sheathing and installation of plumbing, accessories, as well as the final arrangement of the booth.
Upon completion of the assembly of the frame, it remains only to veneer it with the selected material. Consider the dimensions of the material based on the dimensions of the "skeleton". It is better to arrange a drain using a pallet or, at the stage of concrete formation, make a current by placing it there plastic pipe, which will lead to a sewer pit.
The source of water can be either a plastic tank on the cabin roof or a pipe from a domestic water supply.
As you can see, with just a little involvement of imagination, you can build an outdoor shower by spending a minimum of money and getting a maximum of aesthetics and quality.
Most best holiday after hard work in your summer cottage, this is a pleasant, warm, relaxing shower that will not only have a calming effect, but also relieve nervous tension accumulated throughout the day.
To install the shower use epoxy resin for the manufacture of which special fillers for resins are used.
Therefore, many gardeners equip their plots with summer showers.
Summer shower at your dacha
The outdoor shower stall is perhaps one of the most important buildings on the property. With it, you can not only wash your body after a whole day of work on your site, but also refresh yourself in the summer heat.
Before installing a shower cabin on your site, you need to choose the best place for this. The shower should be located at a small distance from the main building, most often behind the house.
After the owner of the site has decided on the area for the shower and the size of the shower cabin, he can proceed with the installation. This room must be at least 1 sq.m. area, but preferably a little larger.
If a shower dressing room is planned in order to undress and hang dry things, the building area is doubled. The height of the building is usually approximately 2.5 meters.
In general, the dimensions of our cabin are 1.0x2.0x2.5 m, this is the best option. If the cabin is planned to be mounted from wood, then it is necessary to mount the frame using wooden beams or metal corners.
Walls in the shower better way ventilation should recede from the ceiling and floor by twenty centimeters. They can be built from materials left over after the main construction of the homestead.
Shower equipment with water supply
When installing a shower stall in your summer cottage, the owner needs to without fail think in advance how to equip the supply and drainage of water. Since the drainage and supply system is mounted at the time of laying the foundation of the future shower cabin.
Water in the shower is very often served from a source located at a remote distance. Such a source can be a well drilled on the site, or a standard water supply.
Nowadays, due to the presence of plastic pipes of small diameter, it will not be difficult to connect the cabin to the main source of water supply. What are the benefits of these pipes, they are more durable and do not rust and various erosions, like metal pipes.
They are sold in coils, and there is not much trouble during the laying of the pipe for the water supply, it is only necessary to provide a connection to the main source, which can be done with a small, rubber piece of hose.
You can also easily connect a plastic pipe to a storage tank for a shower. The advantage of such pipes is that if they were not installed thoroughly, they can be easily removed from the site for the winter period.
Shower drain
Water drainage after washing can be done different ways. Some owners of summer cottages absolutely do not drain the water.
One of the most normal ways is to drain water into a centralized sewer, but, unfortunately, not every owner of a summer cottage has such an opportunity.
The best way, of course, is then the waste and drainage pit. This is inexpensive and allows wastewater to go deep into the ground. Pit for drainage water, can be placed under the shower stall, or in the immediate vicinity of it.
It is dug to a depth of no more than 50-60 cm, the size of the sides is 1.0x1.0 m. After the pit is dug, the soil in it is tightly rammed and it is covered with rubble or broken brick.
On top of the filled pit, put a plastic, steel or wooden pallet.
After that, a shower cabin is mounted. If a sewage pit is nearby, it is best to drain it from sewer pipe from plastic.
Photo ideas on how to make a summer shower in the country
To give with your own hands, then properly prepare for the hot season. Cool and refreshing, it will bring pleasure to both adults and children. From what and how you can build a shower, and where it is better to place it.
Do-it-yourself summer shower for a summer residence: varieties
The simplest designs of a summer shower were erected on six acres by our grandparents. Today, when new technologies, materials, and the dachas themselves have stepped over the status of tiny panel houses, the appearance of shower cabins has also changed. With a strong desire, you can take a swing at a capital summer shower for a heated cottage, on a solid foundation and with a large shower cabin. You can limit yourself to a light frame option, using improvised means.
And yet, which design option is preferable if you are planning to build an outdoor shower yourself. The choice depends on three main factors:
- financial opportunities
- construction skills
- dacha status
The simplest summer shower in the country can be assembled from metal tubes, shower curtain and a plastic barrel.
The stationary option involves the construction of a solid shower cabin made of wood, with the construction of a drain and a connection to the water supply. You can collect a shower from wooden frame covered with film. In addition, the shower can be freestanding or attached to the house. And here, too, there are a lot of options.
The simplest structure connected to the house looks like this: brick wall a water pipe, a wooden tray with a drain, and a shower head made of a metal arc attached to the wall and hung with a bathroom curtain.
If you bring the shower to the corner of the house, then it remains to build only two walls and close the booth from prying eyes.
In the design of man-made showers, be guided by your own preferences and the materials that you have.
Advice! To simplify construction, use a portable shower model sold in stores as communications.
Where to put the shower
If the shower cabin is tied to the house, complex calculations for its installation will not be required. Naturally, it is placed on the back wall, not far from the entrance to the house. For ease of use, it is desirable to lay plastic track to the soul.
If you are planning a do-it-yourself summer shower in the country house in a separate version, you should choose the right place. It is necessary to observe several important conditions that will affect the accessibility, convenience and practicality of the design.
So that the water from the shower head does not make you want to rush into the house and wrap yourself in a warm blanket, we choose a place under the sun. On a platform open to the sun, the water in the barrel will naturally heat up.
Checking the terrain. It is desirable that it be slightly inclined, this will simplify the outflow of water from the shower.
For the convenience of laying water pipes and a short transition, we have a shower stall near the house.
We check the wind rose and choose a place in a summer cottage that is not blown by all the winds.
Advice! Great, if you have a pool in your country house, place the shower next to it.
We build a summer shower
Getting Started practical advice, let's try to build a simple, but aesthetically beautiful and comfortable outdoor wooden summer shower for a summer residence, with minimum consumption materials.
Let's cook:
- boards and slats
- shower set (faucet, curved tube, bracket, adapter and nozzle)
- garden hose
- self-tapping screws
- fasteners
- level
- drill
- Bulgarian
- concrete mixer (tank for mixing cement mortar)
- shovel
- Master OK
