Wooden beach chairs. A simple chaise lounge from the boards

A simple deck chair made of wood. How to make a deck chair with your own hands, photos, diagrams, drawings of a deck chair, video.

Chaise lounge is an indispensable attribute garden furniture for summer holidays on the banks of the river or in the country. You can make it yourself, in this article we will look at the process of making a simple and practical folding deck chair.

The design is quite simple, folding chair- a sun lounger will not be difficult.

How to make a deck chair: drawings.

The figure shows a drawing of a folding deck chair, if necessary, the dimensions can be slightly changed.

1 - rail 20 x 50 x 1300 mm - 2 pcs.

2 - rail 20 x 50 x 1930 mm - 2 pcs.

3 - rail 20 x 50 x 590 mm - 2 pcs.

4 - rail 20 x 50 x 580 mm - 1 pc.

5 - rail 20 x 40 x 520 mm - 2 pcs.

6 - rail 20 x 40 x 560 mm - 2 pcs.

7 - fabric 530 x 1400 mm - 1 pc.

8 - screw M8 x 50 - 4 pcs.

9 - screws 6 x 45 - 2 pcs, and 6 x 60 - 8 pcs.

Scheme of a folding sun lounger.

How to make a deck chair: materials and tools.

To make a deck chair, you will need hardwood: - birch, oak, yew, walnut, ash, beech, pear, elm or white locust.

Hard woods are more difficult to process, but the deck chair will be durable and will last you quite a long time.

Also, for fastening the groove joints, you will need carpentry glue.

Of the tools you will need:

Wood saw.
Drill with drills.
Chisel.
Hammer.
Sandpaper.
Screwdrivers.

How to make a sun lounger

We saw off the slats of the required length according to the drawings, it is desirable to round the edges of the slats. We grind the rails with sandpaper.

The figure shows frames "A" and "B" and the backrest tilt adjuster "C".

Collecting frames. We fasten the rails together with groove joints on carpentry glue, the joints must be strong and not stagger.

On frame "B" we cut out grooves for adjusting the inclination of the back of the deck chair.

We drill holes for fastening, the diameter of the holes for the bolts is 8 mm.

We connect frames "A" and "B" with screws through the holes, then we connect frame B.

Assembling the frame.

We try on the fabric, stretch it, wrap it on the crossbars and sew it by hand or with a sewing machine.

Chaise lounge chair is ready!

Making a sun lounger video.

Main advantages

In their functional purpose, sun loungers are the same chairs, but more stable and with a low seat. In them you can relax in a semi-lying position, which allows you to relax the spine and all muscle groups as much as possible.

The indisputable advantage of sun loungers is their comfortable shape. The garden chair can be folded so that you can sit or lie down on it, depending on the personal preferences of the person.

Traditionally, summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.

Sun loungers are ideal for observing nature, as they are lightweight and very comfortable. Therefore, it is not surprising that many owners install them in their garden or in the country. Such furniture can stand outdoors throughout the summer, and winter period it can be removed to some suitable room, for example, a pantry.

Most often, garden beds are made from materials such as:

tree;
plastic;
rattan.

If you do not have the desire to spend time and effort on self-assembly of a garden lounger, you can always order it in a furniture store.

Types of structures

If you have finally decided to start making a sun lounger for yourself, then at first it will not hurt you to get acquainted with the main types of sun loungers for a summer residence. There are a lot of them, so only the most popular will be considered below:

These are just some of the sunbeds that can be purchased for a summer residence. If you wish, you can independently make a deck chair in the form of a swing, as well as using ordinary tree branches as a material. It all depends on your preferences.

Making a wooden deck chair

First you need to prepare a certain set of materials and tools that you will need to make a homemade deck chair:

self-tapping screws;
jigsaw and screwdriver;
boards for sheathing the frame 2.5 cm wide;
timber 40x40 mm for the frame;
corners for fastening boards (4 pcs.); wooden boards 20 mm thick.

When going to the store for boards and slabs, we advise you to choose a material made from coniferous wood. It tolerates the negative effects of precipitation much better and has a wonderful aroma.

Stages of work

Now that you have everything you need prepared, you can proceed to the assembly of a wooden lounger.

First you should decide on the size of the garden chair. You can use a ready-made drawing or make it yourself. Usually standard sun loungers have dimensions of 60 x 200 cm.

Now you can start making the frame. For it, you will need bars, from which you need to make four sidewalls - two of them should turn out to be 200 cm long, and two more - 60 cm. The finished sidewalls must be further connected to each other using mounting corners.

WITH outside the frame must be sheathed with a board 2.5 cm wide.

We take long sidewalls and attach 4 legs to them, having previously stepped back from the edge of 8 cm. The legs can be made from bars 10 cm long. We use self-tapping screws to attach them to the frame.

Having finished the work on the manufacture of the frame, we begin to assemble the lattice. For it, we need wooden plates, from which we need to cut boards with dimensions of 60 x 10 cm using an electric jigsaw.

We attach the boards to the deck chair frame with self-tapping screws. Be sure to leave a gap between the boards of about 1.5 cm. Then the lounger grill will look neat and beautiful.

If desired, you can make a deck chair with an adjustable back. In this case, the lattice must be divided into two parts. One of them will serve you as a sunbed, and the other as a headboard. We mount both parts to the connecting boards. For reliable connection of elements, it is best to use door hinges.

So that the headboard can be fixed in a certain position, the frame structure with inside add a cross bar. To it with the help of self-tapping screws you need to attach a support stand for the headboard. If you don't have one, you can buy it at any hardware store.

Now that your homemade summer cottage is ready, all that remains is to sand the boards, cover them with drying oil or a special paint and varnish material to protect them from moisture.

Making a fabric lounger

If for some reason a wooden folding deck chair does not suit you, then you can try to make a deck chair out of fabric instead.

Materials and tools

To make a chaise lounge from fabric material, you will need the following:

bolts with nuts 8 mm;
a piece of durable fabric 200x60 cm;
slats of circular cross section 2 cm thick (one bar 700 mm long, two 650 and two 550 mm each);
rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 and two 600 mm each);
sandpaper.

To make a frame lounger, it is best to use tarpaulin, camouflage or denim. They are strong enough and resistant to wear.

Action algorithm

Now you can proceed directly to the assembly of the sunbed from the fabric.

As you can see above, making a deck chair for a summer residence from a fabric is no more difficult than a similar deck chair made of wood.

Buying a garden chair

Perhaps some summer residents will not want to spend time and money on making a deck chair with their own hands. In this case, you can go to the store and buy a ready-made garden lounger there. In the furniture salon you will be able to offer a variety of such products to choose from. Surely among them you will find both budget options and unusual designs of designer models of sun loungers for the street.

After studying the proposed options and comparing their characteristics, you will only have to decide on the amount that you are willing to pay for a sun lounger. The cost of such sunbeds depends on the size and material of manufacture:

wooden deck chairs will cost you between 6000-15000 rubles;
for plastic sunbeds you will have to pay from 1500 to 9000 rubles;
folding frame deck chairs, which can be purchased for 1350-9500 rubles, will not hit your pocket too much.

When traveling to the dacha, many are warmed by the thought that they will have the opportunity to lie down in the fresh air for at least a few minutes and enjoy the surrounding nature. But it is in the power of everyone to make their vacation more enjoyable if you equip a place for it in advance. To do this, you must have special furniture like a deck chair.

The easiest way to buy such a lounger is in the nearest furniture store, although some owners often make a deck chair for themselves and thereby save a lot. You can do the same, especially since it does not require special skills and knowledge. Even the most ordinary wooden lounger for a summer residence can be made from a material that is sure to be found in any household.

But in any case, you will have to prepare for this work, because without drawings you are unlikely to be able to make exactly the deck chair that you want, especially if you do not have the slightest experience in this matter.

A homemade deck chair for a summer residence is much preferable to a store lounger, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end, all this will be offset by the comfort that your homemade deck chair will provide you.

Do-it-yourself deck chair

The summer season is approaching and it's time to think about creating a deck chair with your own hands. It will allow you to enjoy outdoor recreation to the fullest.

Chaise longue means long chair in French. This is a relaxing chair. It can, at the request of the owner, change the position of the back.

Do-it-yourself deck chair

Sun loungers are widely used on the beaches, by the pools. On household plots, dachas.

Chaise lounges are made of various materials:

tree;
plastic;
aluminum;
rattan;
PVC pipes;
durable fabric.

Wooden deck chairs are the most popular and environmentally friendly. They are distinguished by a variety of shapes and designs. The disadvantage of monolithic wooden deck chairs is their weight. But this problem is solved with the help of wheels.

Plastic deck chairs are characterized by easy mobility, ease of care, and relatively low cost. Their minus is fragility.

Fabric beds are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and don't take up much space.

Rattan sun loungers look great in the bosom of nature. They are environmentally friendly. However, their purchase is expensive. With sufficient skills, you can simply weave a rattan lounger yourself.

In the article we will tell you how to create wooden deck chairs with your own hands.

Monolithic deck chair made of wood

Solid models are heavy. Therefore, to facilitate carrying them, wheels are added to the headboard. Further instructions will help you make a deck chair on wheels with your own hands.

You will need tools:

electric jigsaw or hacksaw;
drill;
screwdriver;
self-tapping screws;
sandpaper with fine grain;
spirit level;
roulette.

When choosing a tree, pay attention to conifers. They are sold by affordable prices, are characterized by high water resistance.
For a sun lounger you need materials:

glued board made of wood, its thickness should be 2 cm or more; not less than 2 cm thick.
boards 0.25 cm thick.
wooden beam with a square section of 50x50 mm;
4 wheels with a diameter of 10 cm;
corners to strengthen the bed;
door hinges;
varnish or paint.

We suggest you make a deck chair according to this scheme.

Legend:

Front legs.
Rear legs.
Bearing longitudinal.
Back carrier.
Back pressure.
Bearing cross.
Fixing strap.
Backrest support.
Wheels.
End bar.
Back planks.
Seat planks.
The support bar is transverse.
Fixing strap.

You can independently determine the size of the desired sun lounger and make calculations. Or use standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Assembling a sun lounger on wheels

We fold the base frame from the bars. We fix the supporting parts with corners, similar to those that fix the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for legs from a bar. Their height usually fluctuates between 5-10 cm. We choose a comfortable one for ourselves and the household.

We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We fix the legs with long bolts. The horizontal side is controlled by a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the elements of the lattice. We cut boards 8x60cm with a hacksaw or electric jigsaw.

Using self-tapping screws and a screwdriver, we screw the slats to the deck chair frame. Since the boards are not screwed tightly, we use spacers to get even gaps.

We should have two pieces. The smaller one is for the headboard. We connect both lattices with door hinges. Under the opening part we install a bar for support.

It remains to sand the flaws of production. Apply wood primer. Paint in your favorite color and your deck chair is ready.

For a more comfortable stay, you can sew additional mattresses that fit the size of the bed.

Simple sunbed

To create a deck chair made of wood with your own hands, you need the following materials, as well as tools:

tape measure and square;
pencil;
saw;
electric drill;
screwdriver or screwdriver;
screws, self-tapping screws and studs for fixing;
sandpaper or grinder;
putty for wood;
dye.

The work uses wooden beams:

for the back of a deck chair, take boards 5 × 10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
2 longitudinal bars for a frame 215 cm long;
2 transverse beams -50 cm;
6 legs -35 cm;
13 rails for a seat measuring 2.5 × 8 × 60 cm;
6 slats for the back - 2.5 × 8 × 88 cm.

The first task is to create a very strong frame. We take two parts 215 cm long, connect them with screws with half a meter transverse parts.

Let's move on to the seat. Take all the 60 cm rails. Attach them to the frame with self-tapping screws, leaving small gaps. In order for the gaps to be even and uniform, use spacers 1 cm thick.

We create the legs of the sunbed. To give maximum stability to the deck chair, two legs are nailed “at the feet” at once. One at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you

We make the back of 2 boards measuring 88 cm and 3 - 39 cm. The resulting frame should easily enter the base, leaving a small gap between the structures.

We securely fasten the longitudinal strips. We round them for a more beautiful look.

We attach the back to the base of the sunbed. To do this, you need to drill holes, stepping back from the edge of the seat 9cm. Fasten with pins.

We make 2 grooves for the support bars at the base of the deck chair. The first 5x10 cm notch should be about 9 cm from the hairpin. The second is 20 cm from the first. But its depth will be only 5x5 cm.

A 60 cm bar is inserted horizontally into the first recess. To change the position, the plank is transferred vertically to the second recess.

Sand all the roughness, shortcomings. Process. Cover with paint or varnish. The chaise longue with your own hands is ready.

> DIY garden lounger video

Fabric chaise longue

A chair with a frame, complemented by fabric, is one of the most comfortable, budget types of sun loungers. It is convenient to fold, easy to carry. Can be stored in flat view. It takes up little space.

To create a deck chair with your own hands you will need:

bolts, nuts with a diameter of 8 cm;
small nails with round caps;
sticks of round section (1pc - 65cm, 2pcs - 50cm, 2pcs - 60cm);
rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
needle file, sandpaper with fine grain;
glue;
durable material measuring 200 by 50 cm.

Choose materials carefully so that your work is not in vain. Hardwood bars are perfect for a lounger. Opt for:

birch;
oak;
beech.

Choose fabrics with maximum durability. Great fit:

teak for mattresses;
tarpaulin;
canvas;
camouflage;
denim.

These materials are highly durable and will serve you for a long time. We turn to the creation of a deck chair with our own hands. The base consists of three frames:

A.1200x600 mm.
B.1100x550 mm.
H.650x620 mm.

We cut the boards to the desired length. Sanding with sandpaper.

In the longitudinal bars we make indents of 70 and 40 cm, we drill holes with a drill with a diameter of 8 mm, as with bolts. We grind with a round file.

We make cutouts in detail B. They will allow you to change the position of the backrest later. To do this, step back 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We grind well.

According to the scheme, we drill holes in the bars for connecting parts.

We collect the base of the sunbed. Frames A and B are connected with screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round rails with PVA before assembly. The frame of the sun lounger is ready.

Now you need to sew the seat. Attach the material to the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. Thus, you will increase the wear resistance of matter. The chair will look neater.

We attach the fabric base to the sunbed. We wrap round slats on parts A and B. We nail with small carnations with round caps. The chair is ready.

ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on rails.

Fabric chaise longue with your own hands. Model 2

For this chair you will need:

wooden slats size 2x4 cm. Two slats 122 cm, 112 cm, 38 cm long. One piece 61 cm, 65 cm, 57 cm. And four slats 60 cm long;
slats measuring 2x6 cm. One each 61 and 57 cm;
65cm wooden rod with a diameter of 1.2cm;
piece of fabric 137 cm long and 116 cm wide;
bolts, washers, nuts, screws;
glue;
round file, sandpaper or grinder;
electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them with a machine or fine sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbars at the bottom of the legs help to fix the position of the back. Make them. Or cuts, stepping back from the edge of about 20, 25, 30 and 35 cm.

Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.

On the seat frame, step back from the top 43cm. Make holes.

On the part that supports the back, drill holes in the center of the edges.

Finish all holes with a file with a round section.

Mounting the model

First assemble the back frame. A bar with a length of 61 cm will carry a large load of the body. Fasten it as securely as possible. Leave a small gap between the two rails. Through it will pass the fixation of the tissue.

Assemble the seat. Fold it with the back frame. Between them, be sure to put the washer. Bolt the frames.

ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut from above. For greater reliability, put nuts on glue, varnish or paint. Tighten the nut first. Then slightly loosen it so that the parts rotate freely.

Install the back support piece with washers and bolts.

Sand all the flaws. Lacquer or paint as desired.

Bend the fabric in half, sew, stepping back from the edge of 1.5 centimeters. Turn out. Bend the edge of the material for the rods that fix the panel between the slats. Sew.

Now slide the fabric between the planks. Fasten with a rod. This model mounting allows you to remove the fabric for washing without much effort.

Chaise longue made of PVC

Another example of a sunbed with a fabric base. Only in this case, wooden slats are replaced by PVC pipes. Chair sizes may vary.

In this do-it-yourself deck chair model, we used:

2" PVC pipes;
L-shaped connectors - 8 pieces;
T-shaped connectors - 6 pieces.

Connect first for the vertical bar pvc pipes 30 and 45 cm long with a T-connector. Put L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Please note that one horizontal bar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed inside the structure. The second side consists of two 30 cm pipes, combined with a T-piece, turned at an angle of 45 degrees from the long side of the bar.

Do not hurry. Measure your pipes accurately. As a result, you should get a rectangular design.

Now it's time to make the connection on which the seat will rotate. To do this, insert a 5 cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For the crossbars, use a 30cm continuous tube. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you got a rectangle within a rectangle.

The seat is located between the long section of the vertical section and the short horizontal section. Adjust the incline level that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the desired length. Insert the back brace.

Take measurements of fabric consumption for your chair. Use a thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and pin the fabric to the chaise longue. Enjoy your vacation.

Portable lounge chair

Sturdy, lightweight chair quickly assembles and disassembles. It is convenient to take it with you to nature. The model is so easy to manufacture that it is suitable even for beginners.

The collapsible chair consists of 2 parts:

backrest covered with dense, wear-resistant fabric;
wooden seat.

In addition to tools, the following materials are used:

2 legs for the backrest measuring 20x40x800mm;
2 legs for the seat - 20x40x560mm;
2 lower crossbars - 10x50x380mm;
1 top bar - 10x40x380mm;
1 crossbar for the seat - 20x40x300mm;
5 rails - 20x40x400mm;
piece of fabric - 600x500mm.

The procedure for assembling a portable deck chair is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame dries, the fabric is tucked and stitched. Then it is nailed with the help of brackets and a construction stapler to a wooden blank.

We connect the back and seat of the deck chair.

We are enjoying our new armchair.

Pay attention to another interesting deck chair model in the video.

Original deck chair

Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, covering from the scorching sun. The cost of such a sunbed is 5970 euros. We will tell you how to save money and make an original deck chair with your own hands.

To create a sunbed, you will need the following materials. Also the tools:

2 sheets of plywood 2 cm thick with a size of 160x180 cm;
6 planks with a circular cross-section with a diameter of 30mm and a length of 92cm;
12 planks from the remnants of plywood measuring 94x10cm;
thick fabric with a width of 92 cm;
building glue;
screws;
roulette;
cardboard for the layout;
Circular Saw;
electric drill.

Let's start creating a sun lounger.

Transfer the diagram to cardboard or thick paper. To facilitate the task, you can first draw it into squares 10 by 10 cm. The template makes it easy to correct all the flaws on paper. Subsequently, you will only circle it 2 times. Or maybe you will get a taste and make some lounge chairs.

We transfer the drawing to sheets of plywood and cut out the side parts of the disk or band saw. At the junctions with a round beam, we cut out recesses with a diameter of 30 mm.

We grind all the bumps and trimming defects.

We assemble a rigid structure. Lubricate the ends of the timber with carpentry glue, or PVA. We insert the beam into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Put the weights on the gluing points. And let the sun lounger dry completely.

We begin to fasten the slats to the ribs of the structure. At the same time, we make an indent between them 10-12 cm long. Tighten the screws deeper so that their caps do not cling to the fabric and do not tear it.

We polish the product again. Now we hide the assembly flaws.

With putty for wood, we hide all the heads of the screws in the places of fabric tension. We paint a sun lounger.

You most likely noticed that in the description only the approximate width of the awning is given. The fact is that you can decide on your own to cover the deck chair completely with a cloth, or to make only a canopy. Decide for yourself. Measure the dimensions and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.

Chaise lounge on the backyard of an ordinary private house, cottage, townhouse or country cottage is the most important furniture attribute, which provides a useful and most comfortable pastime of free time for all family members, friends or guests. In addition, the original do-it-yourself deck chair for giving is characterized by the ability to bring an extraordinary uniqueness to the design of absolutely any adjacent territory. An armchair of this kind, made using natural materials, it will be absolutely appropriate to look, both in the shade of trees, under a canopy of wood, and in the sun. The rocking chair will harmoniously fit into any backyard exterior, in addition, it can be used for newborns by placing this piece of furniture under a canopy, or for dolls.

A wooden deck chair for a summer residence or a private house, which can be easily made today with your own hands, is characterized by a number of positive properties and has many advantages. It is thanks to the large number of advantages that a folding wooden deck chair for the home has gained such popularity.

The main advantages of such a piece of furniture as a do-it-yourself deck chair are:

Chaise lounges (as well as swings) have a special design, the structure of the backs, seats and armrests, which allows everyone who uses them to feel as comfortable as possible. Moreover, this applies to both semi-lying and semi-sitting positions, which contribute to the maximum relaxation of the human body. The rocking chair has the same characteristics, which can also be made with your own hands using ready-made drawings from the Internet;
This piece of furniture can be used in the process of sunbathing, as well as placing it under a canopy - for newborns (or dolls);
The lightness of materials and the primitive simplicity of the designs of deck chairs make it possible to move this piece of furniture to any place convenient for the owner;
Folding sun loungers, which are made by hand, are now widely used not only for their intended purpose, but also as benches for relaxation;

Most modern sun loungers are characterized by small dimensions when they are folded - this greatly facilitates the process of storing them;
Qualitative wooden deck chair, which can be made with your own hands, is famous for its high degree of durability and has great strength.

At the present time, using competent drawings, even an amateur in such matters has the opportunity to make a folding or hanging wooden deck chair for a wooden house, which, from the point of view of aesthetics, will be very attractive and can harmoniously complement any exterior of a house, cottage, summer house, townhouse or garden plot. The same applies to such a piece of furniture as a rocking chair, which can be placed under a canopy and used for newborns or even for dolls.

Types of sun loungers

Depending on certain features that the design has, all sun loungers are conditionally classified as follows:

A monolithic product is an armchair in which all components are connected to each other during the manufacturing process, figuratively speaking, fastened “tightly”. Such a lounge chair for the home has an excellent level of strength and can withstand heavy loads - it is safe and indispensable in the country for newborns. Nevertheless, during the operation of a piece of furniture of such a plan, certain difficulties and inconveniences sometimes arise. For example, in such products it is impossible to make changes regarding the angle of the backrest, they cannot be folded, and therefore the issue of moving from one place to another is a problem, and storing them is also quite problematic;

Monolithic chairs with special inserts. This type of similar pieces of furniture made of wood is characterized, in terms of attractive appearance, by a rather large decorative effect. The fact that such products have additional fragments made of different materials, reduces the level of strength and degree of reliability. At the same time, such a chair for the home looks quite aesthetically pleasing and neat;
Portable sun loungers. In such products there are special mechanisms, thanks to which it becomes possible to simply, easily and without hassle change the position of the seats. The same applies to their configuration as a whole. A person who uses this kind of furniture has the ability to change the angle of the footrests, headrests or their backs. In addition, folding sun loungers are a compact cargo that can be easily transported, including taking on trips outside the city;
Armchairs with metal bases. The process of making such sun loungers for the home with your own hands is more complicated, so it is more profitable to purchase them ready-made. Such products are characterized by aluminum or steel frames, on which fabric durable canvases are attached. The advantages of this kind of chairs include low weight, mobility, a high degree of compactness, as well as a high level of resistance to various contaminants during operation.

Components, tools and basic materials for creating a standard do-it-yourself deck chair

Today, using competent drawings, it is relatively easy to make a multifunctional and decorative deck chair for your site or home. In addition, designs of such a plan are now presented on the World Wide Web, for the manufacture of which do-it-yourself drawings are not needed. But in without fail it will be necessary to make certain efforts, theoretical knowledge and physical labor in order to create an attractive and reliable structure of this kind during operation for spending leisure time in the country house under a canopy or for sunbathing (if there are no comfortable swings in the country house).

Scheme of a deck chair with dimensions

TO necessary tools and components, without which it is simply impossible to do in the process of creating a product of such a plan as a deck chair for a home or a rocking chair for newborns (or for dolls), there is a certain list of tools and materials.

In such a process, you can not do without:

saws;
self-tapping screws;
putties for wood;
roulettes;
sandpaper;
marker
paints of a certain (desired) color range;
drills (preferably electric);
square.

In addition, it is impossible to make with your own hands such a piece of furniture as a deck chair or rocking chair for newborns (dolls) without:

wooden boards, the size of which is 400 cm x 2.5 cm × 8 cm, in the amount of four pieces;
wooden bars, 400 cm x 5 cm x 10 cm in size, in the amount of three pieces;
studs, which are intended for fixation, in the amount of two pieces.

Step-by-step process of making a sun lounger

The primary task is to create the most durable frame. In the process of this, it is necessary to create four parts, the material for the manufacture of which is a wooden beam good quality. You need 2 longitudinal parts 215 cm long and 2 transverse parts, the length of which is 50 cm. Then the seats should be made. In the process of this, a wooden board is taken and cut evenly into bars, the length of which is 60 cm. It should be remembered that in order to create a structure as a whole, it is necessary to create 13 elements of this kind.
After that, it is necessary to fix, using self-tapping screws, the frame of the future deck chair with these segments so that the distance between them is 1 cm.

The scheme of attaching the slats to the frame of the deck chair

The next step is to create the legs of the product. In order to give the maximum level of structural stability in the area where the seat will be, double supports should be created, the length of which is 35 centimeters. They should be made from high quality wooden bars. In the headboard area, you can limit yourself to attaching single legs, which will have a similar length.
Next, you need to make the back. In the process of creating the frame, two parts should be prepared, the size of which is 88 centimeters, as well as three parts, the length of which will be 39 centimeters. These dimensions must be strictly observed - only in this case the frame can become part of the main structure. Moreover, small gaps should be left on all sides.
At the next stage, it is necessary to securely fix the boards on the back frame of the product in the direction of the length of the deck chair. In order to obtain the most aesthetic appearance of the structure, the top of the planks should be rounded off.
After that, it is required to attach the back to the base of the chair - this is necessary so that during operation it can easily change its position (be raised or lowered). In the process of this, it is necessary to drill holes, retreating 9 centimeters from the edge of the seat. Grooves must be made through and through - to ensure free passage through 2 structures.

The scheme of attaching the straps to the back of the sun lounger

Then, with the help of studs, the structure should be fixed on 2 sides of the deck chair. After that, 2 grooves should be made at the base of the structure, in which the support bars will be located. As a result, this will provide an opportunity to fix the back of the deck chair for the house in one position or another. One notch (which should measure 5 x 10 centimeters) should be made at a distance of approximately 9 centimeters from where the pin is located. The location of the second groove is about 20 centimeters from the location of the first notch, while the dimensions of the slot should be 5 x 5 centimeters. In the first recess, it is necessary to place a support beam in a horizontal position, whose length is 60 centimeters. This approach will provide an opportunity to lean on the back, i.e., ensure its maintenance and fixation in a semi-sitting position. To be able to change the angle of inclination and create a semi-lying position, it is necessary to pull out the 1st beam and install the board in the second recess in a vertical position.

Process handmade sun lounger almost finished! It remains only to complete the final Finishing work- sand the design of zero sandpaper (you can manually, or you can use electric grinder) and cover the deck chair or rocking chair for newborns or dolls with high-quality varnish or paint.

In order for the hand-made deck chair to serve as long as possible, initially all of it wooden surfaces it is desirable to carefully process with special protective liquids. This will prevent damage to the deck chair (or swing) structure during operation as a result of the aggressive action of various natural factors, including direct sunlight, rain, high humidity, insects, etc. For these purposes, experts recommend using wood vinegar, oil, high-quality wood varnish or glaze.

For additional protection as well as a more comfortable lounge chair, like wooden swing for giving, it is possible to equip with an awning. Most of all, this is necessary if products of this kind are planned to be used in areas with a hot climate or with high humidity. The process of mounting the awning is simple and does not require much - just four bolts with washers, as well as wing nuts. The head of each bolt must be carefully cut off, and the end on which there is no thread sharpened so that it looks like a four-sided flat wedge. It remains only to securely attach the fabric awning to the top of the awning and the side rails of the back of the deck chair (or swing), using bolts for this.

It is very nice to relax in the fresh air after a hard day's work. In order to make the rest as comfortable as possible, special sunbeds - sun loungers can be placed on the site.

They should be comfortable and fit well with the overall design of your garden. Currently, many retail chains and online stores offer a huge range of summer lounge chairs, but it is much more pleasant to make them yourself.

In this article, we will provide a detailed guide to the construction of wooden and fabric sun loungers, talk about how to protect them from moisture and pests.

Types of sun loungers

Before proceeding with the manufacture of a deck chair, you should consider the main types of country loungers. There are a lot of them, let's focus on the most popular:

Wooden sun loungers. Wood is one of the most environmentally friendly materials, it is absolutely safe for human health. On sale you can find wooden sun loungers different forms and designs: from reclining back to full-fledged loungers, repeating the curves of the human body. The disadvantages of such sun loungers are the rigidity of the material and the rather laborious movement of sun loungers around the site;
Plastic deck chairs. If you have chosen this option for yourself, then it will be much easier to purchase a ready-made deck chair and, if desired, decorate it to your liking. The advantages of plastic deck chairs are relatively low cost, ease of care and mobility. Plastic is a fairly light material and, moreover, is not afraid of moisture;
Chaise lounges from pallets. Pallets or pallets are called supports designed to move various cargoes. Most often, pallets are made from boards. From the pallets that have served their purpose, you can make a fairly comfortable deck chair;
Fabric sun loungers. This type of bed is very easy to store and move. The basis of a fabric deck chair is a folding wooden or metal frame with a seat sewn into it. The disadvantage of such a deck chair is only the fragility of the fabric.

Of course, these are far from all types of sun loungers, there are also sun loungers in the form of wicker branches and even sun loungers for cats and dogs. The choice depends only on your preferences. Next, we will focus on the process of manufacturing a wooden and frame lounger.

Making a wooden deck chair

Materials and tools

We will need the following materials and tools:

wooden plates, the thickness of which is 20 mm;
timber 40x40 mm for the frame;
boards for sheathing the frame, 2.5 cm wide;
jigsaw and screwdriver;
4 corners for fastening boards;
self-tapping screws.

How to make a sun lounger out of wood

Consider the main stages of assembling a wooden lounger:

1. Starting to manufacture, you need to decide on the dimensions of the future deck chair. For convenience, you can make a drawing of a sunbed or find it ready on the Internet. Most often, the design has a size of 60x200 cm;
2. The next step is to make the frame. To do this, you need to make 4 sidewalls from the bars: 2 long, 200 cm long and two shorter - 60 cm, respectively. To fasten the sidewalls, we need mounting corners;
3. The outer part of the frame is sheathed with a board, the width of which is 2.5 cm;
4. We fix 4 legs on the long sidewalls, stepping back from the edges of the structure by 8 cm. In order to make the legs, bars 10 cm long are used. Attach them to the frame using self-tapping screws;

When the frame is completely ready, we proceed to the assembly of the lattice - the main part of the lounger. From prepared wooden boards, boards 60x10 cm wide are cut with an electric jigsaw;
Finished boards are attached with self-tapping screws to the deck chair frame. Do not forget to leave a distance between the boards of 1-2.5 cm, so that the lounger grill has a neat and aesthetic appearance;
If you want to assemble a chaise lounge with an adjustable back, then the lattice should be divided into two parts. One of them will play the role of a sunbed, and the other - a headboard. We install both parts on the connecting boards. It is best to fasten the lattice elements using door hinges;
In order for the headboard to be fixed in a certain position, a transverse bar is fixed from the inner edge of the frame. A support stand for the headboard is attached to it with self-tapping screws (it is better to purchase a ready-made stand at a hardware store).

The deck chair is ready, all the boards should be sanded and covered with drying oil or a special coating to protect against moisture.

Making a deck chair out of fabric

Materials and tools

To build a frame deck chair from fabric material, you must have the following available:

Rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 and two 600 mm each);
Round slats 2 cm thick (one bar should be 700 mm long, two 650 and two 550 mm each);
A piece of strong fabric measuring 200x60 cm;
Bolts and nuts 8 mm;
Sandpaper

Stages of work

Consider the installation of a frame lounger in stages:

1. In order for the deck chair to fold easily, it is necessary to assemble three frames from prepared and cut slats. Frame A is 120x65 cm, frame B is 100x60 cm and frame C is 70x60 cm. Holes should be made in the longitudinal rails at a distance of 75 and 45 cm. In frame B, it is necessary to make 2-4 cutouts, at a distance of 6-10 cm, to adjust the angle of the lounger. Detailed scheme the manufacture of frames is shown in the figure;
2. To assemble the sunbed frame, frames A and B must be fastened to each other using screws that are inserted in advance drilled holes on planks. Frames A and B are fastened similarly;
3. After the frame is made, the seat of the future lounger is cut out and sewn. To determine the appropriate length of material, the fabric is applied to the lounger in the folded position. The fabric should be in a slightly taut position, but no effort is needed;

The edges of the material must be processed and hemmed to increase its wear resistance;
We fasten the fabric to the round slats, which are located on frames A and B. You need to wrap the slats with fabric and secure with small nails. On the prepared fabric, you can make loops and simply put them on the slats.

As you can see, a folding deck chair is also quite easy to mount on your own.

How to process a finished deck chair

To make the deck chair last longer, you can use the following material processing techniques, both during manufacture and during operation:

Special impregnations and antiseptics for wood will help protect wooden deck chairs from the negative effects external environment(moisture, decay, harmful insects). Wood materials are best processed before mounting the structure;
Lacquer, drying oil, paint. These coatings will also help extend the life of wooden deck chairs. It is best to cover the product with any of these products immediately after manufacturing;
Water repellent fabric. They will help to increase the wear resistance of fabric products and preserve bright colors. The effectiveness of such impregnations is maintained for 2-4 weeks.

Where to buy a ready-made deck chair

Currently, there are no problems with buying ready-made deck chairs. You can find them in various furniture stores and online stores. There are both budget options and original design models of outdoor sun loungers.

The cost will depend on the size and materials of manufacture:

Prices for wooden deck chairs range from 6,000 to 15,000 rubles;
Plastic sun loungers will cost you less, from 1500 to 9000 rubles;
Folding frame deck chairs do not differ in high cost either, they will cost you about 1350-9500 rubles.

To learn how to inexpensively make a wooden deck chair with your own hands, see this video.

Hot summer brings a lot of trouble to a person. How sometimes you want to lie down somewhere and take a nap under the dense canopy of trees. Such rest both relaxes and allows you to gain additional strength.

To please yourself with such a relaxing relaxation, you need to come up with something. Something that is both quite easy to do and does not take much time. And here it is worth paying attention to the unusual long chair-chaise lounge. It's pretty simple and handy.

And in order not to lose sight of anything, it is enough to use photographs of a sun lounger set by yourself, which can be found in large numbers on the Internet.

Long... chair?

A chaise longue is a long and lightweight wooden chair that is designed to relax. Most often, sun loungers can be seen at tourist camps, recreation centers, sanatoriums and hotels. They are installed next to a pool or an artificial reservoir, where any vacationer can lie down and relax calmly.

The deck chair fits very well into the overall interior, so a person can install it in his country house, house or plot. Nice appearance will decorate any corner of your home.

A person can either buy it for himself or make a deck chair with his own hands.

What do we have?

Comfortable long chairs look completely different. And before proceeding directly to work, you should understand what type of deck chair you need to make. They are:

in the form of a rocking chair (the back is at an angle, so the process of rest is very comfortable. You can not only sit, but also lie down and even sleep);
as ordinary chair(elements of a folding bed or a crib are taken as a basis; armrests are mounted at will);
in the form of a monolithic product (during manual assembly, all parts are tightly fastened, so disassembly is impossible; it has strength and reliability. Backrest adjustment is not provided, the product itself does not fold);
in the form of a soldered product with beautiful hand-made inserts (chaise lounge self made with amazing beauty; can fit into any interior);
in the form of a sunbed (a strong and reliable deck chair made of plastic or wood; beautifully sanded and varnished);
in the form of a portable product (it is compact and reliable; a position regulating mechanism is provided).

Cheap but angry

The materials that should be used when working on a sun lounger are very diverse. The myth that a sun lounger is wooden chair, is unreliable.

When working on its creation, the most various materials, which are at the same time quite cheap, and you can find them in any hardware store. Chaise longue can be made from:

tree. At the same time, the deck chair will differ in strength, reliability, and environment it will not suffer. Minus - it weighs quite a lot (to facilitate the transfer, wheels should be attached);
fabrics. The basis of a chaise lounge differs in pleasant comfort and convenience. The frame is made of wood;
rattan. Chaise longue, heavily made to decorate the home. It is environmentally friendly, but there is one big drawback - the price;
plastic. Plastic sun loungers are very light, so you can safely take them on a hike. The frame is made of wood or a special pipe. Minus - poor reliability;
PVC material. Chaise lounge on a fabric base, but the base is made of PVC pipes.

Beginning of work

After the type is selected and the material is selected, the work starts with the outline of the drawing of the deck chair. The drawing plays the main role, since during its creation the dimensions, shape, additional inserts and much more are determined that will be included in the final work.

Not everyone can draw such a scheme, so if necessary, you should contact the experts.

Helpers

After the approval of the drawing, in order, for example, to make a wooden deck chair with your own hands, a person will need such improvised assistants:

wood for the legs of the back, seat;
wooden rod to support the back of the part;
fabric for the back itself;
bolts;
nuts;
screws;
self-tapping screws;
washers;
special glue;
drill;
hand saw;
marker;
roulette;
sandpaper;
round file.

Using these simple devices, you can make a beautiful and comfortable lounger for relaxation in one day.

Fabric deck chair on a wooden frame

If you need to make a small version of the chair, then folding chaise lounges come to mind. A folding deck chair is very easy to make. First:

you need to take the base from a folding bed or crib;
drill holes in the main frame;
make four cutouts in the auxiliary frame (to adjust the tilt of the back);
make holes for both ends of the rails (for installing the seat);
Lubricate the round cross-sections with an adhesive solution and install in the holes.

In the second phase, the seat itself is made. To do this, take the fabric, and measure out the right dimensions(the fabric must sag after installation).

Then on sewing machine fabric edges are processed. At the very end, the fabric is stretched over the crossbar and nailed.

Conclusion

Making a deck chair for a summer residence or at home is not a big deal. If everything is done correctly, then in the end you can get a great assistant who will serve as a place of rest in the hardest part of the working day.

Photo of sun loungers with your own hands

Not so long ago, a deck chair was considered exotic, and only wealthy people could afford it. We saw sun loungers in colorful magazines and American films, but even with a strong desire, an attempt to buy something like this for ourselves would have turned out to be a failure - there simply were no sun loungers on sale.

Well, everything passes sooner or later, and the information revolution generously endows us with new opportunities. Now anyone can find on the Internet a manual on how to make a sun lounger with your own hands. However, such plans are often difficult to implement, especially for a beginner. They require the use of a large number of expensive tools, and therefore remain unfeasible for many.

This master class is a pleasant exception to the rule. The deck chair presented by the author has simple design and a clear system of folding and adjusting the backrest. If you approach the issue of choosing materials correctly, you will need a very modest arsenal of power tools and in last resort, you could easily borrow some of them from friends and acquaintances.

In addition, given the fact that the deck chair is made of natural wood, it can easily be used at home as well, instead of a couch or armchair in the living room. It quickly folds and unfolds, has a completely finished appearance. A beautiful textile mattress will complement the image, and the deck chair will perfectly fit into the interior of your home.

In order to make a deck chair with your own hands, you will need:

Materials:

Pine board 20 - 30 mm thick;
- slats with a section of 30 x 30 or 40 x 40 mm for the manufacture of a backrest folding system;
- natural or mineral oil for woodworking, drying oil or varnish for woodworking;
- screws and small nails;
- glue for gluing wood materials;
- metal one-piece loops for fixing the back: two larger ones and a smaller pair;
- a ready-made mattress with ties for fixing it or fabric, batting, foam rubber and threads for its manufacture.

Tools:

Miter saw, circular saw or wood saw;
- a grinder if you are using old or unpolished boards;
- screwdriver or Phillips screwdriver;
- electric drill;
- a clamp with a device for drilling pocket inclined holes (optional, but greatly facilitates the work);
- paint brushes;
- construction tape measure and square;
- pencil.

Step One: Sketch and Layout the Chaise Longue

A product layout is simply necessary if it itself consists of a large number of parts. It will not allow you to get confused in their countless list and will significantly speed up the entire work process. In addition, you will have a complete list of parts and their Exact size. Well, without this, then?

But everything is preceded by a sketch. This sketch on a sheet of paper by hand gives rise to an idea and lays the main outlines of the image of the future product. That's where you should start.

In your case, the computer layout of the deck chair is already ready and you can safely take all the dimensions indicated in this master class as a basis. But first, write down on paper the entire list of parts that you have to make. Specify their sizes opposite and only after that proceed to work.

Step two: making parts

The detailing you have collected should be transferred to the material in the form of markings. Use a pencil for this to easily correct crept in errors. Also use a construction square. Especially if you plan to resort to help for sawing boards. hand saw. It will allow you to mark angles at 45 and 90 degrees, and accuracy is never superfluous.

So, mark up the parts and start making them. Saw the boards into pieces of the length indicated on your list. You will need:

Two longitudinal frame parts 1850 mm long;
- five transverse frame parts 470 mm long;
- four blanks for legs 280 mm long;
- four - five boards for the base of a deck chair 1270 mm long;
- two side long boards for the base of a deck chair 190 mm long;
- two small slats for supporting the backrest when folded, 580 mm long;
- three bars for the manufacture of the backrest 43 mm long;
- four - five boards for the base of the back;
- two slats for the backrest folding system, 230 mm long;
- one horizontal rail for the backrest folding system, 460 mm long;
- six small pieces of rail for the backrest folding system - three on each side.

All indicated dimensions should be specified, since the author indicated them in inches. They also depend on the thickness of the boards you are using. To figure out the dimensions in your case, always start with the general values and work your way down to the finer details.

Step three: assembling the sun lounger

Start by assembling the deck chair frame. Remember that it is customary to assemble any frame with screws. This ensures the relative strength of the entire structure. However, it often happens that screws alone are not enough. Then glue is also used. Such combined connections serve very well and do not require repair for a long time.

Assemble the chaise lounge frame with glue and screws and fix the legs. Fasten the base parts to the frame with small nails. In parallel, make the back panel.

Inside the hole for the backrest on the sides, screw two support rails on which the backrest rests when folded and on which sections of the rail (teeth) are attached to adjust the inclination of the backrest. Fix your teeth.

Connect the back to the frame using a pair of one-piece metal hinges. Also make a U-shaped piece for the back and secure it in place with the smaller loops. Check backrest adjustment.

Step Four: Wood Protection

Any furniture sooner or later is subject to wet cleaning. Untreated wood hardly tolerates such processing, and the result often turns out to be zero. Therefore, the tree must be treated with suitable paints and varnishes.

The author decided to leave the wood unpainted so that it could be seen that it was made from natural wood. In this case, the most reasonable option would be to varnish the deck chair with a matte or semi-gloss transparent varnish.

Since furniture is usually used very intensively, you should choose a varnish that will give the most durable and wear-resistant coating. For example, profile furniture varnish. Apply it to the surface of the wood in several layers and let each one dry thoroughly.