DIY transformer tables. DIY transforming kitchen table for a small kitchen: drawings and assembly diagrams

Have you been dreaming of a folding table for a long time? Can't find the right model? Do not despair. Indeed, it is possible to do

Benefits of transforming tables

The modern world is full of technological innovations. This applies not only to electronics, but also to furniture. Transformer furniture is at the peak of popularity. This is especially true for tables. They can be placed in any room: living room, kitchen, dining room. Due to the compactness of this furniture, you have a great opportunity to save a lot of space. In addition, it can carry several functions at once. For example, today the table-bed-transformer is in great demand. You can also make it with your own hands. During the day, you can seat all your friends at it and have a meal, but at night this table turns into a bed on which you can relax. Interesting, isn't it?

Transforming tables are especially relevant for a small kitchen. Their functionality depends on the mechanisms that are the most important aspect such furniture.

Often these tables change not only in size, but also in purpose. So, for example, a small box that can serve as a chair can easily turn into a festive one. dinner table. Now you can organize a feast and not worry that you will have nowhere to seat guests.

What is the secret of the mechanism of transformer tables

The mechanism for the transforming table is so simple that even a child can handle it. It works with special built-in iron parts that move certain parts of your table, thus making it powerful and big.

As a rule, stores today offer a wide selection of modern folding furniture. It is durable and can please everyone with its long service life. In addition, transforming furniture can please with its wide selection in color scheme. Thus, you can choose the shade that suits your interior.

The only drawback is the high cost. Not every average citizen of our country can afford to purchase this element of the interior. But for those who want to acquire it, we suggest making a transforming table with your own hands.

How to make a book table yourself: materials and tools

Before you make a transforming dining table with your own hands, you need to make all the calculations correctly and prepare a drawing. There are certain parameters for this product: height - 75 cm, width - 80 cm, tabletop length - 152 cm. Therefore, you will make a table of just such dimensions or deviate slightly from them, but you need to build on these parameters.

For the basis of such furniture, you should opt for moisture-resistant chipboard, although non-moisture resistant is also allowed. Fasteners in this case are 12 pieces of butterfly loops in the amount of 4.5 cm.

To attach the tabletop to the side of the table, 4 corners are needed. In addition, 2 limiter corners are also needed here.

We collect a table-book

The first thing you should do is process the saw cuts. To do this, use a simple iron. Remove excess material with a sharp construction knife.

After that, start assembling from the legs. Attach the hinges using special modern screws. The mechanism for the transformer table is ready. For an aesthetic appearance, confirmations are closed with plugs.

Take the bottom edge, which should be at the bottom of the table, and the two side walls. Fasten them so that the edge is 10 cm from the floor. In this case, the rib should be between the walls. Take the second crossbar and fasten it to the side pieces parallel to the first. It should be about 40-45 cm from the floor. Here it is worth considering the moment that the distance from the ends of the inner ribs to the side ends of the side walls should be approximately 3 cm less. Otherwise, the tabletop wings will not fit snugly and loosely against the table base when folded.

After that, on the sides, first attach a small one in the middle parallel to the inner ribs, and then two large parts of the table top on the sides.

Strengthen the legs and tighten all the mechanisms.

One do-it-yourself transformer table is ready.

What you need for a folding table for the kitchen

The transforming table for the kitchen is a leader in space saving. It is ideal for small spaces, as its base is attached to the wall.

In order to make such round table- do-it-yourself transformer, you must have the following components at hand: the bearing part, 2 struts, shelves and a tabletop rounded on one side.

To get started, also prepare a drawing with the dimensions you need. For the material, it is better to take laminated chipboard with a thickness of at least 1.5 cm. But if you do not have one, then it can be replaced with or planed boards. But in the latter case, they must be rubbed with fine sandpaper. In addition, such material requires painting or varnishing.

Assembling a kitchen folding table

The base is attached to the wall by hanging. For this, experts advise using special anchors. And its parts themselves are assembled using self-tapping screws and This process is less time-consuming compared to the previous one, but it still requires a lot of effort and attention.

So, the mechanism of a transforming table, made by oneself, in this case is concluded only in fastening the moving elements to the base, which is already tightly adjacent to the wall. After the ends are glued with an edge, staple the back surface and attach the shelf parallel to the upper small part of the countertop, fix it with self-tapping screws. After that, follow the instructions above and continue to fasten the parts of the table one by one.

The choice of mechanism and the design of a coffee table-transformer

Before doing coffee table-transformer with your own hands, you need to decide on its functionality, which fully depends on which mechanism for the transformer table you choose. After all, its appearance (with a spring or gas lift) directly affects how your table will fold and unfold.

The second stage in the assembly of folding furniture is its design. As a rule, here you should be guided by the recommendations that are included with the mechanism itself. Project coffee table may be different. The simplest option is the usual small table, consisting of two halves of tabletops, which are further moved apart and another part of the tabletop is inserted in the middle. Thus, a transforming coffee table, which almost everyone can do with their own hands, increases in size.

Assembling a folding coffee table

After all the details are cut out of chipboard, their ends must be glued with an edge. After that, try on all the details. Mark with a pencil. If your product is dark in color, then it is recommended to use a sticker for this purpose. In this case, the previously made marks will not be erased and will be clearly visible on the surface of the laminated chipboard of any color.

We assemble the transformer table with our own hands using a special drill for confirmations. After assembling the base, proceed to fixing the mechanisms. To do this, do it in the right places through holes and fasten the parts with special bolts.

Many owners of small kitchens prefer to use them only for their intended purpose - for cooking and storing food. A place for family meals has to be found in the living room. Not the most convenient and hygienic option. The exit lies on the surface. Rather, on the countertop of the transforming kitchen table. Its compactness and functionality allows you not to run more with plates around the apartment, have breakfast and lunch in the kitchen. Their popularity and demand is growing. The range includes premium models and budget products made from different materials.

Small table big possibilities

Compared to a bulky dining table with a limited set of functions, it has a lot of advantages.

Compactness. The ability to change the size of the tabletop and the height of the table, depending on the currently selected function and the area of the room;
Ergonomic and easy to adjust, which even a child can do;
Safety in use;
Height adjustment allows it to be used by a person of any height;
Saving room space;
Multifunctionality.

Transformer magazine-lunch

The coffee-dining table can turn a cozy living room into a dining room in a few seconds.

The stability of the model in the unfolded state is provided by supports with constrictions that move when folded.

Metal for the kitchen

Similar models, often combined with wooden elements, are purchased mainly for use in the country house, in the park, and the gazebo. Multifunctionality allows them to be used not only for their intended purpose, but also for cooking grilled products on an open flame. Very good option for picnics, guaranteeing not only comfort, but a spectacular spectacle in the dark. Compact when folded. How to transform an ordinary table by decorating it ceramic tiles, find out in .

Plastic

Lightweight, easy-to-care products made of decorative plastic also have their fans. The elements of the sliding mechanism are usually made of metal, which guarantees the reliability of the design. Basically, these models of tables are used in country houses.

Do-it-yourself transforming kitchen table, drawings, diagrams

Buying furniture is easy. But high-quality transformers are not so cheap. In addition, the commercially available may not fully meet your taste and wishes in terms of functionality. Making a transformer is within the power of any person who not only knows the names of different tools, but also knows how to handle them. Skills in this field are desirable. For manufacturing, even leftovers and trimmings of the right size and tools are suitable:

Saw;
Electric drill, socket and other keys, drills;
Fasteners, screws, nails;
Sandpaper, paint;
Long brass hinges;
Wooden blocks, corners or pipe trimmings for table legs;
Details for load-bearing rails made of wood.

If you used a drawing from the Internet, it is better to make sure that it is accurate and that there are no errors before starting work.

The order of work, how to make a compact transformer

When making a transformer yourself, it is very important to observe all the parameters. A discrepancy of a few millimeters can deprive you of such a desired product.

Work algorithm:

Prepare all the elements of the future design, making sure that they fully comply with the desired dimensions. Details for the legs must be absolutely identical to ensure the stability of the table;
Drawing a line on inside countertop exactly in the center, cut it into two identical parts. On each of them, attach support tires;
To connect the legs through each pair, drill holes of the desired diameter. Attach loops parallel to each other;
Assemble the product.

There are many options for making a transformer. The principle is the same everywhere. Availability of skills, dexterity, the right tools. The main thing is not to be afraid and follow the schemes and all sizes.

Transforming table (sliding table, butterfly table) - great option for small kitchens. It takes up minimal space, is mobile, easy to fold and can expand up to the right sizes when you need it. Also read about how to choose the right inexpensive for the kitchen.

For modern small apartments folding furniture becomes a real salvation. For example, a transformer table can be used daily as a very small cabinet for magazines and newspapers. But if guests suddenly come to you, then such furniture unfolds into a full-fledged dining table, designed for 6-8 seats.

And if you do not have the funds to purchase transforming furniture, then you can easily make it yourself.

Such an elegant table, made independently, is useful not only in a city apartment. It can become an indispensable assistant in the country. These items are very mobile. Usually they are placed in the garden or on the veranda.

Preparatory stage of work

As a rule, softwood is usually used to make the frame of a transformer kitchen table. Pine, spruce and other coniferous trees are suitable. But experienced craftsmen prefer to assemble home furniture from linden. It is easy to process, and such interior items serve much longer.

The tabletop is usually cut from a finished wooden furniture board. But if desired, you can do it with a plastic or aluminum cover. The last option is well suited for giving. Ready-made metal countertops can be purchased at stores that sell products for making and repairing furniture.

If you want to use plastic as a countertop, then give preference to decorative chipboard plates coated with polystyrene. These panels are usually used to decorate walls in bathrooms and kitchens. But the kitchen table can also be made from scraps of wood left after repair. In this case, the countertop is made of type-setting, consisting of several scraps of boards.

In addition to the materials needed to create the frame, you will need long furniture hinges. They are needed to assemble the folding lid. It is wiser to give preference to brass or copper hinges. They cost a little more than their counterparts, but such a table will last you longer.

Back to index

Table materials

If you prefer to buy materials, then you will need the following:

board or finished furniture board, 2-2.5 cm thick. If the furniture will serve you only as coffee table, which from time to time turns into a dining room, then the tabletop can also be made from a sheet of thick plywood. But for the kitchen table, more durable and reliable materials are needed.
Material for decorating the edge of the tabletop. Previously, strips cut from thin plywood or thin veneer were used for this. But now you can buy a ready-made plastic edging, which is easy to install yourself.
Timber or furniture shield for table legs. The choice of material depends on the furniture model. If desired, the legs can be replaced, for example, metal pipe or corners.
Bearing tires. It is wiser to purchase ready-made ones, and not to make them yourself. In modern stores, you can buy both wooden and metal tires designed for transforming furniture. In addition, such parts are sold complete with all necessary fasteners, and you do not need to purchase them separately.

You may be interested in: How to choose the right furniture for the kitchen?

You will need nails and self-tapping screws, which, if desired, can be replaced with eurobolts. If you plan to use furniture outdoors, then it is wiser to close the fastener heads with special plastic plugs. But experienced craftsmen do not recommend using wooden spikes as fasteners. The fact is that the load on the transforming table is much higher than on ordinary kitchen furniture, and the dowels may not withstand it. But such spikes can be used to fix the stiffeners to the countertop.

Back to index

Necessary tools and drawing

You will need the following tools:

hacksaw (electric jigsaw);
plane;
electric drill with a set of drills designed for woodworking;
grinder or a special nozzle designed for grinding;
a set of sandpaper of varying degrees of grit.

Don't forget to prepare your measurement tools. You will definitely need a centimeter ruler, a construction tape measure and a square. And the building level will help to install the countertop correctly.

The appearance of the finished transforming kitchen table depends on the model you have chosen. You can simply paint the furniture, stain or varnish. If desired, the table is decorated using decoupage technique, decorated with carvings or patterns. The required set of tools also depends on the type of final finish chosen. In any case, you will need brushes and paint foam rollers.

Before you start making, prepare detailed drawing furniture, indicating the dimensions you need and the image of the main fasteners. An example of such a scheme is shown in Fig. one.

https://website/youtu.be/dFCkrggszzU

In this case, a fairly simple, but reliable and stable design is used. If you wish, you can change not only appearance details, but also the specified dimensions. The table given as an example is quite low. When folded, its height is only half a meter, and when unfolded it is 75 cm. If you have a large family or you like to gather large companies in your country house, the table can be made much larger.

You may be interested in: Countertop for the kitchen: how to choose the right one?

If you want to make a figured countertop of a complex shape, then it is wiser to make a pattern in real size in advance, transferring it to graph paper or tracing paper. This will help you not to make a mistake in the sizes.

Back to index

Making a transforming table

From the furniture board, it is necessary to cut blanks for the following parts:

countertop elements (in the above example, the cover consists of 2 parts, but 3 or 4 segments can be made);
legs - 2 pcs.;
stiffening ribs to which tires are attached - 4 pcs.

The drawing does not show the dimensions of the stiffeners, as they depend on the type of tires you have chosen and the method of fastening. But it is worth remembering: the longer the parts, the more stable the unfolded tabletop will be.

First, it is wiser to cut out the elements of the countertop from the furniture board. This will allow you to avoid unnecessary trimming and save material. Mark all the details in a single block, without allowances. Try to arrange them so that the edges of the shield coincide with the edges of the elements. Be sure to check the direction of all lines and the correctness of the marked corners.

After that, cut the countertop and cut it into fragments. This simple method will help you make absolutely identical blanks. If you are using plywood or glued composite furniture board, then pre-glue the cut lines with masking tape. So you will avoid chipped edges, and there will be much less debris. In addition, the markup can be applied to the surface of the adhesive tape, and not to the tree.

https://website/youtu.be/Ky8DnqBFOgI

Then cut blanks for the legs. First, rectangular parts are formed, leaving an allowance of 1.5 cm for fillets and curly cutouts. And only after the blanks are cut out, cut off the round corners. This is most conveniently done with a jigsaw. But you can get by with an ordinary hacksaw, trimming the irregularities with a planer and a carpenter's knife.

You may be interested in: How to decoupage a cabinet?

Lastly, blanks are made for stiffeners. They don't have to be shaped. Ordinary bars are also suitable. All blanks are carefully ground, getting rid of burrs.

Most owners of modern housing note a common problem - the lack of free space. In an effort to place all things as compactly as possible, you have to resort to all sorts of tricks. One way to free up space without sacrificing comfort is to make a do-it-yourself transforming table using a ready-made lifting mechanism. Multifunctional furniture, which in the folded position is very modest in size, can be organically fit into a variety of interiors due to the large number of options. It is not difficult to make a transforming table at home, you only need basic skills and a correctly cut cut. constituent parts designs.

Transforming tables are found in various modifications. There are products for work, eating, reading. Each of these categories has unique characteristics and capabilities. According to the purpose of the model are divided into the following types:

Storage table. Is different unusual design, includes two or three drawers and a countertop. This product is opened by rotation along the axis.
Lunch magazine. The model is recognized as the most common transforming table. When folded, the product is inconspicuous and does not take up much space. On ordinary days, it is used as a coffee table, and if necessary, the structure can be expanded into a comfortable, full-fledged dining table. With just a few movements, 5-7 people can comfortably fit behind it.
Journal worker. This is a transformer table similar to the previous model, for the manufacture of which a different type of tabletop is used. There is no need to completely unfold or change the shape. This design is used to transform the table into a desk with the ability to adjust the height. It also provides additional storage boxes. In addition, the coffee table top can change position by changing the order of fasteners.
Picnic table. The product assumes the presence of two benches, shifting and unfolding which you can get a full comfortable furniture. This model does not contain particularly complex devices; in fact, there is one mount with swivel mechanism and fixing bolt.

There is a turntable, which is equipped with an interesting folding mechanism. Design schemes suggest the presence of additional surfaces superimposed one on top of the other. Special metal guides are used here. At the moment of unfolding, the upper part shifts, and additional elements appear. Subsequently, all the components are combined into a single countertop.

Rotary table-transformer involves the use of inserts responsible for the extension of additional parts of the tabletop. They are either gas lift or spring loaded. The first insert features quiet operation, sliding is carried out thanks to internal processing, while the spring operates with little noise. At the same time, the gas lift has its own resource, after which the mechanism weakens and wears out. The spring is recognized as a more durable insert, however, and more traumatic, since it can fail and break.

Rotary tables - the most demanded model. On the sides there may be additional parts of the countertop. The design of this piece of furniture suggests that all its elements can undergo transformation. At the same time, there are products that can change the height. As a rule, the regulation function is provided for tables with a more complex automatic device.

A fairly common model is the round table. Thanks to its shape, it helps to “soften” the interior. Round products after unfolding become oval, due to which their size increases significantly. At the same time, up to 8-10 people can fit behind them. Such a transformer has many advantages: when unfolded, it increases significantly, accommodating many people sitting, it becomes a central, unifying element in the room. At the same time for the table round shape many times more space is required than for similar rectangular structures. Simplicity self-manufacturing a round version of transforming furniture is a moot point, since it is possible to cut a tabletop for it only with the help of special equipment.

Rectangular tables-transformers are no less popular. This model is considered classic version. Among the advantages note the spaciousness and compactness. When folded, the product is small-sized, and after decomposition it becomes a full-fledged dining table. There are various variations of sliding models, the size during transformation may vary slightly or quite significantly. Rectangular design it is easiest to make it yourself, even a novice master can make such a table.

Journal worker

Lunch-magazine

Turning

Picnic table

storage table

Types of transformation mechanisms

Each model of discussed furniture is equipped with a transforming mechanism. There are several types of such devices. All of them have their own disadvantages and advantages, focusing on which it is worth choosing the most acceptable option for yourself. There are the following transformation mechanisms:

One of the most improved and modernized is the "acrobat". The design implies the presence of a metal frame with a spring axis, the main tabletop is attached from above. The plugs that hold the sliding part are located on the sides of the furniture. Furniture with an acrobat mechanism looks like a small coffee table; it is easy to assemble it with your own hands. Transformation into a standard dining model occurs in a few seconds.
The sliding mechanism of the transforming table increases the tabletop thanks to hidden sections fixed under the product. It is enough to pull the main parts to the side, as a free space appears, along the edges of which grooves are installed, an additional part is placed in them. Experts advise giving preference to metal mechanisms, since plastic parts significantly reduce the period of operation of the table.
The lifting mechanism (“book”) is the very first transforming device. During the Soviet period, furniture equipped with such a design was in almost every home. The table-book unfolds by lifting the side tabletops and installing supports under them. Previously, similar pieces of furniture were equipped metal frame, which increased the size and weight of the structure. Now such products are made of chipboard. Regardless of the lightness and compactness of such tables, such models are considered obsolete options.

The transformation device can be made with your own hands. But since this will take a lot of time, financial resources and effort, it is more rational to purchase a factory model of the lifting mechanism.

Mechanism Acrobat

sliding mechanism

Table-book

Self assembly

For the most part, all transforming tables suggest the possibility of self-assembly, so if you wish, you can do without the services of a master and save money. The assembly instructions included with each model detail the entire process step by step.

As standard, any model of the table is equipped with:

legs;
lifting mechanism;
structure frame;
shelves and drawers (if any);
fittings;
accompanying instructions with a scheme for assembling a transformer table.

Separately, you will need to prepare a set of tools. First of all, you will need a screwdriver and a screwdriver. A ruler with a pencil and a building level will not be superfluous. After all the tools are prepared, you should study the instructions for assembling the transformer with your own hands. This will save time and eliminate the possibility of errors and damage to the structure. You need to assemble the transformer table step by step according to the factory scheme:

Attach the legs to the frame.
Install the tabletop lifting mechanism in the same place.
If shelves or drawers are provided, assemble them.
Install the additional worktop on the lifting mechanism.
The assembly of the table is completed with the installation of the main tabletop, after which it is necessary to once again check the reliability of all fasteners, tightening the bolts if necessary.

When assembling a transforming table with your own hands, you must strictly adhere to the instructions and diagrams. The correct sequence of actions will provide the owner with a long and safe period of operation of the product.

Assembly diagram

Ready product

How to make your own

Stores offer a variety of transforming pieces of furniture. The cost of such models is sometimes quite high. Making a transforming table with your own hands will help save money.

For self-assembly, you will need to prepare the following tools:

drill driver and bits to it;
electric jigsaw;
drills for wood;
disc grinder.

It is allowed to use a disc for a grinder as an analogue of a grinder, as an option - you can use a special nozzle for a drill.

Before assembling the table, it is important to prepare the materials:

canvas;
timber;
double tabletop and underframe (it is better to order a cut with an indication of the required dimensions when buying);
lifting mechanism;
fixing screws.

For the manufacture of a transforming table with your own hands, drawings are one of the most important stages. They can be made using special computer programs: draw a table diagram, create a cut map, calculate the amount of materials required. Using the program is not difficult, it will take one or two days to prepare the project.

At the time of purchasing materials in the store, it is better to order the sawing of parts in accordance with the required dimensions and quantity. The finished elements will only need to be fixed with bolts by mounting the transforming mechanism. Also, before you make a transforming table with your own hands, you should start preparing holes for fixing parts. It is better to make markings with a pencil and a ruler. This will ensure an even installation.

The assembly algorithm is as follows:

When the holes are ready, fit the parts.
Assemble the frame of the product, securely fastening the constituent elements together.
Fasten the table legs and underframe.
Install the main countertop on top.

The finished product will not differ from store models. According to a similar algorithm, you can also make transforming coffee tables with your own hands. A definite plus homemade design in that it will fully comply with all individual wishes, and its cost will be quite low. Regardless of the model chosen, these are multifunctional pieces of furniture that will be indispensable for furnishing small-sized housing.

Table design

Sawing parts

Most apartments cannot please with a wide area. Residents have to get out in order to deceive the space and not deprive themselves of the necessary items. Multifunctional furniture helps win extra square meters, and belongs to this group.

Transforming tables are well suited for the kitchen, living room and even for the bedroom. Such a piece of furniture can be made in different ways, depending on the functions that you want to endow it with.

This table is also called folding. It is classified by function:

magazine-lunch;
Coffee table - workplace;
table - storage system.

The magazine-lunch option can be found most often, because the number of friends and acquaintances who come to visit increases over the years, but the living space does not.

The transforming dining table is hardly noticeable and does not detract from valuable space. On ordinary days, it plays the role of a coffee table, and on holidays it turns into a real dining table. In order to seat 5-7 people, a few simple manipulations are enough. This is suitable when all space is connected into one.

When creating a coffee table - a workplace, a different type of countertop is used. It does not need to unfold completely or change shape. This version of the transforming table turns into a desk, taking the required height. Additionally, furniture is equipped with drawers to store stationery. Depending on the system of fasteners, the table can be given several positions.

Models with smooth adjustment mechanisms are more convenient to use. With their help, you can organize a workplace in any corner of the apartment.

Table-storage system has original design. It consists of two or three drawers and a table top. The table is opened by turning around its axis.

Folding device

You can’t skimp on it, because ease of use depends on it. The table should be laid out with a few movements and not require much effort.

Folding tables with a complex automatic mechanism provide a simultaneous change in the area and height of the tabletop.

Table frame

Duration of operation depends on its durability. Frames come in different materials:

wooden;
metal;
with plastic parts.

Structures made of metal and wood are considered the most reliable. They withstand repeated folding and unfolding cycles well. Frames with plastic components are cheaper, but do not withstand long-term operation. But if the table will rarely transform, this option can be considered.

legs

They serve as a support, so they must withstand a large load, which increases when the table is unfolded. Thick glass supports have proven themselves well. They themselves are quite weighty and able to withstand considerable weight. glass legs perfect if you need a transforming table for the living room.

Wooden poles also handle the load well. This option is suitable for classic interiors.

Additionally, you should read. The appearance of the product depends on the material from which the top is made.

Such furniture can be of several varieties, which depend on the mechanism for transforming the table:

Using inserts. It is considered the most popular type. A countertop is built into the design, which diverges along the guides at the time of transformation. The additional part of the tabletop can be placed in the center or on the sides of the table.
Using the automatic mechanism. It has one or two additional surfaces located under the tabletop. When the main part starts to move, the additional parts also move. This type of table can have several layout options and have a gas lift or springs. The latter option is considered more reliable.
Double expansion. The model consists of two surfaces stacked on top of each other. To expand such a table, it is enough to fold the top.
Rotary table. An interesting option, in which the main top and additional countertops do not form a single whole when decomposed. To create such a table, special metal guides are used.

What do you need to create a transforming table?

Many people decide to make such a piece of furniture on their own after getting acquainted with the prices of transformer tables in stores. The finished table will cost about 15 thousand rubles. If you do it yourself, you can save at least 5 thousand rubles.

Project cost:

Transformation mechanism - from 3 thousand rubles.
Chipboard panels for countertops and legs - from 500 rubles.
Fasteners - from 50 r.
A set of screws and self-tapping screws - from 200 rubles.

A folding table can really be made for $100.

Manufacturing consists of several stages:

The choice of folding mechanism.
Project creation.
Cutting parts from a chipboard panel.
Initial fit of parts.
Frame installation.
Table support installation.
Tabletop installation.

To make a high-quality transformer table, it is better to create drawings in special computer programs. They not only draw the layout of future furniture, but also calculate how much materials are needed and create a cutting map. The programs are quite simple to manage, so the creation of the project will take one to two days.

The number of parts and their dimensions can be ordered at the same store where chipboard panels are sold. The cut planks will only need to be bolted together, after which the transformation mechanism is installed. For even installation, it is necessary to make markings with a pencil before drilling the holes for the screws.

The finished table will not differ in any way from store exhibits if you choose a high-quality transformation mechanism and materials for the frame. Such furniture should be chosen if you do not know how to create