Houses finished with a block house from the outside. Block house wooden

If all the necessary points are taken into account in this process, then the result will meet all your expectations.

We install the block house

Metal crate

The installation of a block house is always carried out according to, regardless of the surface on which the installation is carried out, be it wood, brick or any other material.

To do this, it is necessary to attach bars with a thickness of 30 to 40 mm to the wall. It is also necessary to observe the interval between them about fifty to sixty centimeters.

Then they should be aligned in height. One of the huge advantages of this design inside the structure is the sheathing with a block house, in which there is no need to later level the wall before the finishing process.

Wooden crate for a block house

When interior decoration of a room with a block house, thermal insulation is not necessarily necessary, which usually occurs when finishing facades. In a special order, such a procedure is not required for wooden and brick structures. Such a question about the insulation of the room before you begin to install the crate. If you still decide that you need insulation, then the thickness of the bars, respectively, should be increased. And one interesting fact- sound insulation will be improved, since there will be free air space between the wall and the sheathing.

Installation of a block house with insulation

The standard way to install a block house inside the building itself is horizontal execution along a vertical grid. But sometimes another way is used - vertical mounting boards. Often this method is used in rooms with a higher humidity coefficient: baths and saunas. This fact is a prevention for the destruction of wood, which can be the cause of the accumulation of water in the grooves of the board itself.

If we turn to the example of gluing wallpaper with an overlap, then it is here that we can draw an analogue with the installation process. The installation of the spikes of the first board and the rest must be directed to the light source, which will make the joint of the boards not so noticeable. But this method can be regarded as an exception, not a consequence. The main way is still setting, with the position of the spike on top, horizontally, and on the bottom of the board - a groove.

Hidden fastening of the block house

One of the important references will be for you that in order for the material to acquire the humidity of the environment, it is necessary to hold the block house without packaging before the installation process itself in a closed room for several days.

You can start the installation itself not only from above, but also from below. Fastening with a nail or self-tapping screw at an angle into a spike is one of the most common methods. To start, for easier and more convenient installation work in the best possible way must start from the bottom. It would also be appropriate to mention another way - the use of kleimers. And kleimers are special brackets for fastening. If in this way we fix the block house, then its cost increases accordingly, but the installation itself inside the room remains reliable, durable and of high quality.

Successfully completed exterior decoration of the house is the achievement of several goals at once: improving the appearance, the appearance of a protective layer that protects from external influences and ensuring the correct functioning of the wall cake.

One more should be added to this list. important point: the ability to install the skin with your own hands.

The main selection criterion is usually appearance, since the rest of the functions are performed imperceptibly and are greatly extended in time.

The decorative qualities of the sheathing material depend on the taste of the consumer, on his preferences. The wooden paneling of the house is traditional for our country and is well perceived visually. One of the most common and spectacular types wood paneling is a block house.

Block house - one of the varieties of siding. The appearance of the skin is a convex oblong strip, in the set the material imitates log house. The classic type of block house is made of wood and, according to the type of panel connection and common features, is one of the types of lining. The wall, sheathed with a block house, has the appearance of a wooden house built of logs, but is devoid of the disadvantages of this type of building.

Advantages of a block house:

During manufacturing, the material goes through a cycle of special procedures that reduce the ability to change linear dimensions, warp, crack and absorb water.
Has high mechanical strength, resistant to external influences and easily amenable to different ways local recovery.
The light weight of the block house does not create an excessive load on the supporting structures of the house.
environmentally friendly material.
It has high frost resistance.
It has high heat-saving properties.

However, there are some disadvantages:

Wood is flammable, even with regular impregnations with flame retardants, the risk of fire remains high.
The material needs periodic maintenance - painting, impregnation, etc.
The vapor permeability of the block house is very low, which makes it necessary to take measures to increase the ventilation of the lining space.
A wooden block house is much more expensive than other types of sheathing.

The properties of the block house are somewhat different from the usual types of wood paneling. Operating conditions, experienced loads and temperature changes put forward certain requirements for the quality of the material. In the manufacture of wood, it undergoes special processing, deep drying, impregnation with compounds that reduce moisture absorption and the ability to burn.

The reverse side of the panel is flat with two or more grooves that compensate for dimensional changes during swelling and exclude surface swelling. The front side is a segment of a circle that imitates the surface of a log in a log house. The connection is made in a tenon-groove, available on opposite edges. A set of panels repeats a neatly made frame made of turned calibrated logs, making the appearance of the facade neat and solid.

Types of block house - which one to choose?

Block house is a material that has many varieties. traditional look - wooden panels, according to the principle of connection and general appearance, standing close to the lining.

They have several varieties, divided by the quality of the material:

E- Extra. Perfectly glued wood, straight-grained, without knots and surface defects.
BUT— A clean surface without damage, chips or burrs. A number of small intergrown knots may be allowed.
IN— Some defects, knots or slight flaws in the material are acceptable.
FROM- There are quite a few shortcomings. The material is used for finishing auxiliary buildings that are not visible from the facade.

In addition to the wooden block house, there are analogues from other materials:

Vinyl.
Metal (galvanized steel),

The panel may have one wave, two or more. Vinyl or metal panels, as a rule, have 2 waves. Wooden - mostly one, but options are possible.

Vinyl and metal panels are devoid of the disadvantages inherent in wooden samples, but have their own pros and cons.

Main advantage alternative species material is as follows:

Water resistant.
Lack of ability to burn.
They do not rot, fungus or mold does not appear on them.
They do not require maintenance, painting, etc.
They have many color options.

The disadvantages include:

Vinyl siding is brittle in freezing temperatures.
A high coefficient of thermal expansion creates certain difficulties during installation.
Low level of heat and sound insulation.

Vinyl and metal panels are much cheaper than wood, which contributes in no small measure to the greater popularity of these types of material.

Necessary tools for installation and additional elements

Installation of vinyl and metal siding is the same for almost all types and types of material. Therefore, the installation of a wooden block house will be considered, since there are fundamental differences here.

For installation you will need:

Electric drill.
Screwdriver, screwdriver.
Roulette, level, hammer.
Awl for pricking the centers of holes for self-tapping screws.

The list of tools can be greatly expanded, since the order installation work largely depends on the condition and material of the walls.

As additional elements for a wooden block house, some metal elements can be used - near-window trims, corner overlays, spotlights, internal corners, etc. There are no special wooden elements, the fitting of corners or junctions is carried out by conventional carpentry methods.

Facade surface preparation

Preliminary preparation is the most important stage of work, on the thoroughness of which depends on the durability and quality of service of the wall cake and cladding.

Procedure:

Removing all foreign objects, dismantling of air conditioners, gutters, brackets, etc.
Inspection and detection of all existing deficiencies.
Removal of old paint, peeling or crumbling areas. The surface must be completely monolithic and durable, all weak areas are removed as much as possible.
Repairing potholes or dents resulting from removal problem areas . Putty is used. In the presence of a large number of dents or at a large depth, continuous plastering of the surface is recommended.
The last stage of preparatory work is the application of a double coat of primer with intermediate drying according to the user's instructions.

NOTE!

In no case should you neglect the preparatory work. The condition of the walls should be as close to ideal as possible. After installation of the cladding, there will be no access control or change in the state of the walls. All possible actions should be done in advance.

Wall cake and ventilated facade

A wall cake is a collection of all the layers that make up the wall of a house.(photo of the device below):

The inner wall itself is the enclosing structure.
Warming material.
Vapor waterproofing membrane.
Crate (or, as it is otherwise called, subsystem).
Ventilation gap.
External cladding (in our case, a block house).

Listed the maximum composition of the wall cake. In some cases, there is no need for a ventilation gap or insulation material. At the same time, if there is no ventilation gap, then the insulation is impervious to vapor (polystyrene or EPS). The absence of insulation, most often, requires a ventilation gap to organize the removal of steam from under the skin.

Selection and installation of the crate

The lathing is a supporting structure for the installation of sheathing, which simultaneously performs:

Leveling function in the presence of imperfections in the geometry of the walls.
Forming a ventilation gap.
Supporting insulating material (not the best way, but used quite often).

The design of the crate is a one- or two-layer system of slats. The first layer is leveling, it forms a plane and supports the insulation. The second layer is installed across the first, it forms a ventilation gap and directly carries the skin.

The material can be used wooden bars or, much more efficiently, metal guides for gypsum boards. The lathing is mounted on pre-installed brackets or direct hangers for gypsum boards. To fasten the strips, self-tapping screws with a tip for a drill are used.

Insulation installation

The heater performs at least two tasks:

Reduces home heating costs.
Eliminates the formation of condensate on the walls and wetting of materials, leading to their destruction.

The choice of insulation is enough difficult task. In order to use the most appropriate type, one must understand the physical nature of its operation. The main property is vapor permeability, i.e. the ability to pass through itself water vapor passing through the walls.

If the insulation vapor permeable(for example, all types of mineral wool), then a ventilation gap must be made.

Impenetrable types of insulation(polystyrene, EPPS) do not require the formation of a ventilation gap, but to remove water vapor, you will need to create effective system ventilation.

The insulation is installed on the prepared wall surface.

The most successful course of action:

Installation of brackets for the crate.
Insulation lining. The material is tightly installed on the surface without cracks or gaps. The brackets are passed through the incised sections of the insulation. If necessary, the gaps should be filled with mounting foam.
A hermetic layer of a vapor-hydroprotective membrane is mounted on top of the installed insulation, protecting the insulation from external (atmospheric) moisture.
Wall waterproofing and vapor barrier

Hydro and vapor barrier is made using a special film ( best option- vapor-waterproofing membrane). Protection can be installed either from the inside or from the outside.

Internal installation is carried out using impervious types of insulation(polystyrene, foam plastic, EPPS, etc.). It performs the role of cutting off the internal steam from wall materials, preventing the appearance of condensate and wetting of the walls.
External installation of protection is made on top of the insulation. In this case, the film protects the material from external moisture, while releasing steam from the inside. This option makes it possible to remove moisture from the walls and keep them dry and efficient.

The film is installed in rows with an overlap of 15-20 cm with gluing the joints with special adhesive tape.

How to cut a block house at an angle

Cutting at an angle is carried out either with an electric saw installed in a special jig with markings. Such a device allows you to adjust the position of the saw so that the cut will be made exactly at the set angle.

Another option is to make a miter box - the simplest device in which a hacksaw moves in the grooves of two bars. It takes quite a bit of time to make a miter box, but you will need to precisely cut the guide grooves.

How to join panels on external and internal corners

Docking corner joints of the block house can be done in different ways:

No special action is taken the corner connection is made by installing the corresponding profile additional element.
A planed beam of square section is installed along the axis of the corner, against which the ends of the panels abut. The option is good, but you will need to accurately calculate the thickness of the timber and the length of the panels in order to make the connection as tight as possible.
The panels are cut at 45°, after installation, the panels corresponding to each other on different sides of the corner are connected with self-tapping screws. To do this, in one panel, it is necessary to drill a blind hole at an angle into which the screw head will pass. Thus, the panels will be attracted to each other, you will get a tight and neat connection. The holes should then be plugged with plugs and ground flush.
The most difficult option - the corners of the panels are sawn at 45 ° and precisely adjusted to each other without joining each other.

How is the joining along the length

The following options can be used to dock the block house:

Straight vertical slats against which the ends of all panels abut (similar to H-slats for vinyl or metal siding).
Tight end-to-end butt (needs precise 90° cut).
One end is cut at 90°, the second is also cut at 90°, but in the opposite direction. The joint can be pulled together with a self-tapping screw, providing a strong and tight connection. The screw is screwed in at an angle, the hole is closed with a cork and sanded flush.

Methods for attaching a block house and the procedure for sheathing a house

How to sheathe a wall with a block house? Panels can be attached in different ways:

Through fastening front surface . The easiest way, but the appearance will be spoiled by the presence of nail heads or self-tapping screws.
Fastening with self-tapping screws screwed into the spike. After installing the next panel, the screws are not visible, which will greatly improve the appearance of the canvas. The disadvantage of this method is the need to screw the screws into the edge of the stud, which will cause a loose connection, it will be necessary to trim the counterpart at the places where the screws are installed, the stud may be chipped.
Using clamps. The simplest and reliable way. The fastener tongue is inserted into the groove, the clamp is screwed or nailed to the crate. The connection is tight, strong and non-destructive.

Panels are mounted with a spike up or down:

The first option is used if the fastening is made on screws, the second - on clamps.
The first panel is installed with a small gap between the supporting surface to form a ventilation gap.
A similar gap is made in the upper part of the canvas so that the air under the skin can circulate freely. The thorn-groove connection should be made as tightly as possible, avoiding gaps in which moisture can accumulate.
When connecting, do not hit the panel hard with a hammer, as there is a danger of flattening the tenon or groove and complicating the connection of the next panel.

pediment finishing technology

Before starting work, you should consider the layout of the panels to get a symmetrical pattern. All end connections are best done in one place so that the vertical strips installed symmetrically create a kind of decorative element.

This is especially important with a large gable area, when the length of the panel is not enough. Panel cutting at an angle can be done both on the ground and directly in place, for greater accuracy, but this option is possible in the absence of a soffit or an unshielded roof overhang.

Block house is a natural material that allows you to imitate a log cabin with a high degree of realism. Accuracy, dimensional accuracy and ease of installation make this cladding one of the most preferred materials, and the ability to periodically tint the canvas and update the facade of the house allows you to constantly have new look walls, which is not achievable with other types of sheathing. The high quality of the material contributes to a long service life of the skin.

Useful video

Instructions for sheathing a block house house using an example of interior decoration:

In contact with

Eco-friendly houses natural materials have become very popular in recent decades. One of the most common are traditional wooden buildings. Such structures are suitable both as a summer country house or capital cottage for year-round use, and for small office buildings.

And enthusiasts say that it is worth using a practical block house.

Why wooden houses often need cladding

Houses made of any wooden building material have long been a priority among citizens. The leaders of sales in this segment are profiled or glued beams, logs. Such materials are already dried, equipped with saw cuts, connecting elements, and prepared to the maximum for the construction of reliable walls.

Supporters of naturalism prefer to use a traditional log, which implies a long period of shrinkage of the structure - with this method, the flaws in the blanks will always be in sight. In this case, sheathing the house with a block house is recommended no earlier than a year or two after the completion of construction.

The walls of self-built houses often have visible defects or need additional insulation, since the climate in most regions of the country is very unstable. It would be quite a reasonable step to clad a wooden structure on the outside, which does not reduce the usable space of the premises and gives the building a special charm. Exterior wall cladding required frame houses- this method will create a cozy atmosphere inside the building and ennoble its appearance from the outside.

A separate category is capital old buildings, which lose their external attractiveness and become less comfortable. Additional presentable wall protection will extend the life of the house: it will protect against precipitation, mechanical damage. The insulation is laid outside and combined with a hydro-barrier, and the surface of the old tree is cleaned of paint, varnishes, covered with antiseptic compounds. Diligent owners can do all the work with their own hands.

Block house: advantages, species diversity and selection rules

Block house is considered the most successful and presentable type of wall paneling. Its environmental friendliness is undeniable. More often source material for the panels is softwood. Many consumers are attracted by the ability of lamellas for many years to release phytoncides that inhibit the development of bacteria.

Strength, excellent insulating properties in combination with maintaining natural air exchange are arguments that can be decisive when choosing a facing material. Also important is the ease of installation of the structure - any craftsman can do it with his own hands - and the absence of "wet" work.

Professionals note that the pine block house is indispensable for the external cladding of the walls of a residential building, but for saunas and baths, dense hardwood panels will be a rational choice. In order to choose the best variety and not be disappointed in the material, you need to decide on the price category before the start of purchases:

Class A - elite block house excellent quality without the slightest error. It remains the most expensive and very presentable.
Class B - implies the presence of minor knots - up to 3 cm - on front side, which, with a skillful arrangement, can even decorate the facade. And on the back side, small chips are acceptable.
Class B - the number of knots and their configuration is not regulated.

The grade of material for the walls is selected depending on the purpose of the building and the aesthetic preferences of each. If you plan to build a house with your own hands, then with self-selection lamellas should carefully examine each segment and put aside specimens with cracks, moldy deposits.

Masters draw the attention of beginners to special nuances: the closer the lines of annual rings are to each other, the stronger and denser the wood. The implementation of sheathing with a blockhouse of the building from the outside involves a wider modification of the board - about 150 mm.

Sheathing the house with a block house is made on a prepared frame, which is easy to build with your own hands from slats or ordinary boards. A similar crate is located along the walls in increments of 500-700 mm. And the resulting gap is great for laying insulating materials. The layer thickness is calculated depending on the region. For example: in winter, the thermometer shows from -8 to -12 o, which means that a five-centimeter thickness of the material is enough.

If you plan to use mineral wool, then the step is selected in proportion to the available plates. And in front of the block house panels there is a layer of wind protection. Any type of waterproofing will extend the life of the base material.

To do the work yourself, you will need a screwdriver that can be replaced conventional drill. A square, saw or grinder with a set of disks will also come in handy.

When constructing the frame, plumb lines and levels are used - the rails must be installed strictly vertically. Only in this case, the lining will have the correct geometric shapes. If samples of class B or C are available, then before work, you need to scrupulously inspect them and plan the location of the panels. Defects should be masked with a special putty. Any block house is treated with impregnations.

It is important to correctly cut the material, carefully measuring all the parameters of the walls with your own hands, taking into account the presence of door and window openings.

For sheathing the outer walls of a wooden structure, the block house is laid horizontally. The spikes should be located on top: in this way they will protect the grooves from rainwater. Sealed connection - "thorn-groove" ensures the tightness of the structure.

Experienced craftsmen prefer to build corners by perfectly washing down the lamellas at an angle of 45 degrees. And for those who do such work for the first time with their own hands, it is worth using a decorative outer corner. To ennoble the joints near the window or door, you need to purchase cashiers.

For fastening to the frame of a wide block, clamps and self-tapping screws are used: holes are carefully drilled in the panels, which are then masked with the help of selected putty or closed with special plugs.

The finishing stage is the application of varnish or paint to the block house. Renewal of the coating must be done every 5-7 years.

A block house is a special type of house cladding that looks like a wagon board, on the one hand, which looks like a high-quality rounded log. Possessing high practical and aesthetic characteristics, the block house is the most demanded material today, and it is used both outside the house and inside. The main advantage of the material is the presence of a thorn-groove connecting system, so each owner can sheathe the house with a block house without much hassle.

When should this finish be used?

As a rule, if the building is made of bricks, sheets, slabs or blocks, there are no questions about why sheathe your house with clapboard. And here's how to deal with wooden frame? Definitely sheathe, here's why:

In the case of building a log house "in the paw" inside the house, finishing will be required, the block house is ideal for this.
If the log house was built from profiled timber, the finish will help to achieve the “Russian hut” style and additionally protect Wall panels from negative impact.
For all buildings, a block house is an ideal finishing material that will last for many years, while it is easy to place additional heat-insulating material under the cladding.

Important! All cladding work can be carried out only after complete shrinkage of the structure.

When choosing a product on the market, you should be careful, many manufacturers offer a false log - an option that is not equipped with connecting grooves, which creates certain difficulties during installation. In the case of sheathing a house with a block house with your own hands, the procedure is simple, of course, if you do not have to create intricate designs.

Finishing: work in stages

How to sheathe a house with cladding, we will understand this in detail:

At first preparatory work, consisting in the creation of a preliminary crate. It will come in handy both inside the house and outside, depending on which areas get off.
Square bars 30 * 30 mm are stuffed vertically in increments of 0.5-0.6 m, fastening can be done with nails, planks and do not forget about the processing of the bar.
At this stage, it is worth deciding on the need for additional insulation and be sure to align the installation of the crate with a level.
Once the crate on the walls is ready, proceed with the installation of the block house. Regardless of the type and type of panels, fastening always starts from the bottom to the top.

As for fixing the slats, there are two ways:

Using Galvanized Claymore, which is bent into a groove with one part, the other is attached to the crate bar using a screw. After that, the panel is linked to the next one and the process is repeated. The positive aspects of the type of fastening are the strength and reliability of the masonry. Sometimes it is acceptable to use liquid nails to enhance strength. At the same time, the panel itself does not require screws and nails, so the risk of panel deformation is reduced to zero. Watch videos from professionals to understand the whole process in detail.
The second option involves fastening the panel to the lathing bar with self-tapping screws. To do this, you need to make a hole in the board equal to half its thickness. After that, a screw is heated into the hole, and then the hole is caulked flush with the board, as shown in the video. Now the block house is securely fixed, while the screw head is not visible. The method is laborious and there is a risk of damage to the lamella during installation.

Advice! If you have extensive experience in facing work, you can apply the option of driving nails into the groove of the board at an angle of 45 degrees. The method is complex, requires skill and a minimal shift of the nail immediately injures the lamella.

There are several difficulties that can be encountered home master who wants to finish the walls inside the house with a do-it-yourself block house:

Docking panels in the corners. It is better to use special corners of the plinth, fitting parts of the lamellas under them. To do this, both walls of the corner are driven out, then the joint is hidden with a semicircular or flat element and fastened with liquid nails.
Particularly sharp corners should be hidden behind a wooden rail; it can be decorative if it is an interior decoration and plain in color if an external facade is clad.
Laying a panel fitted to the ceiling can also complicate the process a bit. If the ceiling is not finished, then in the process of facing all the irregularities will hide later, and if the ceiling is finished, the decorative cornice will skillfully hide the cracks.
Window openings and doors require the use of special platbands. Thus, all cracks and backlashes are hidden, and the risk of snow, rain and wind entering the room is minimized. Platbands can be mounted on nails, glue, self-tapping screws.

Regardless of the choice of technology, there is no need to carefully prepare the walls for cladding with a block house. The crate can be stuffed on old paint, plaster, uneven panels, the main thing is that the frame holds well, and everything else will be covered with a block house.

After completing the installation, it is better to walk with varnish on the surface. except additional protection, tint varnish will give the building the desired color scheme and complement the interior if the rooms in the house were lined.

Features of facing with a wooden block house

Wooden cladding requires its own technological subtleties:

Do not use ordinary nails, self-tapping screws - they will quickly rust. It is best to use galvanized metal fasteners.
The construction of the frame is an obligatory step; under the cladding, you can lay a heater, a vapor-permeable and windproof membrane.
As soon as the installation of the crate is completed, the panels are laid out according to one of the methods described earlier.
To prevent the possible process of decay, damage to the wooden block house, the panels should be treated with compositions at least once every 5-6 years.

As a rule, a block house goes well with the decoration of the basement with artificial stone, natural stone or slab finishing materials. The combination of siding and block house looks good.

Finishes

There is a variant of cladding made of plastic, wood, metal:

wooden blockhouse it is made from coniferous wood and has class A or B. The latter is characterized by the presence of cracks and cannot be used for exterior cladding - such material will spoil the very first winter.

Important! To pick up good material, it is worth looking at the thermal regime and strength. If these are strips with a “winter” indicator, then the strength of the material meets all the requirements of the customer: the panels will not crack, deform or peel off from frost.

Metal blockhouse – new material, which is devoid of the disadvantages of wood, but does not at all differ in the warmth and naturalness of wood.
Vinyl blockhouse- the most popular product on the market finishing materials. The low price and high quality indicators made the products in demand. In this case, the developer can always choose the right shade. And if it is a stable manufacturer and supplier, the vinyl block house will stand flawlessly for decades without losing its original qualities.

Knowing how to sheathe a house with clapboard, looking at the photo and choosing suitable option decor, it remains only to clarify how much the material costs and proceed with the facade cladding, internal walls premises of your home. As you can see, the sheathing does not carry any difficulties, special tools and special knowledge are not required: to give the house a perfect look and achieve this with minimum investment- this is the main task that can be solved with the help of the "American lining", as the block house is also called.

For exterior decoration, you can use different panels, and the sheathing of the house with a block house is considered very popular. This material has many advantages, and also has a great appearance, and you can veneer it with absolutely any house, regardless of the material from which it was built.

This type of cladding is most often chosen in accordance with the preferences of the homeowners. Sheathing a house with them is quite simple, and the resulting cladding has the following positive parameters:

the outer layer is very durable, so various external mechanical influences cannot cause a violation of the integrity of the finish;
even if the cladding of the facades with an imitation of timber is broken as a result of a strong blow, it can be restored, for which it is simply polished, after which it can be easily;
a block house is suitable for timber and other materials from which a house can be built;
its cost is considered acceptable;
block house for exterior finish has an attractive appearance, so it provides excellent;
it is lightweight, so it does not create a significant load on the foundation of the building;
imitation trim is simple work, which can be performed even by a non-professional, and at the same time an excellent result of the process is guaranteed;
when a facing layer is created, it is possible to additionally produce high-quality insulation of the building, which ensures high thermal insulation parameters of the house;
facade decoration is considered a block house the best choice, insofar as .

Its disadvantages include a short service life, and to increase the period beneficial use it is important to regularly paint the resulting coating, as well as cover it with high-quality varnish and create other protective coatings. This leads to a regular waste of money and time.

The choice of material for finishing

An important point is right choice allowing you to get the perfect result of the work performed. Elements may differ from each other in the material from which they are made, as well as in other important parameters.

The right choice is based on the following recommendations of experts:

the most popular material is considered to be wood, and most often a larch block house is chosen, which has beautiful view and good parameters;
important to choose quality material, therefore, all boards used in the process of work must be exactly the same;
it is advisable to buy a house block represented by long ones, as this will reduce the number of joints;
it is not advisable to purchase material whose appearance is unattractive, and there are also visible defects, which include various rotten areas, cracks or knots;
it is important to make sure that the moisture content of the boards does not exceed 20%, and this information should be indicated in the accompanying documentation;
metal block houses are considered quite popular, and they also imitate wood;
metal material is easy to lay on the beam, however, it is taken into account that it has a significant load on the foundation of the structure, so it is important to make sure in advance that the base can cope with a significant impact;
when buying a material, it is important to make sure that the packaging in which it is sold is intact and reliable.

Thus, choosing a block house or imitation timber is quite simple if you follow certain recommendations and carefully study the appearance.

Cladding rules

Sheathing a house with imitation timber should be carried out only taking into account the basic rules of this work, which include:

the cladding is created exclusively on a pre-created frame, therefore it is not allowed to mount an iron or wooden block house directly to the walls of the building;
fixing is best done using metal clamps or staples, and if boards of considerable thickness are used, then self-tapping screws are suitable for this, on which a special anti-corrosion coating is applied;
before sheathing the house with an imitation of a beam with your own hands, it is recommended to leave all the elements for some time in the conditions in which they will be used for acclimatization;
should be made in such a way that the groove is at the bottom, and the spike is at the top, which will ensure the durability of the skin, and also prevent the accumulation of a large amount of dirt in the joints;
between separate elements a small gap is left to ensure that the finish of the block house is not damaged by changes in temperature or humidity.

After studying the basic requirements and rules of work, you can proceed to the direct lining.

Finishing technology

Finishing a house is considered an important process. Home decorations are usually carried out by the owners of the structures themselves. This is due to the fact that it is quite simple to sheathe houses from the outside with the chosen material, and this process is divided into the following stages:

if wooden panels are selected, then they are covered with antiseptics and flame retardants;
you need your own house;
a crate is formed, since the material should be fixed only to the frame;
the selected insulation is placed in the cells of the created frame;
attached to the crate of the panel, and this work starts from the bottom corner, and the elements are located in a horizontal position;
clamps are used to fix the panels.

Thus, the decoration of the walls of the house with the help of this facing material is a simple and understandable work that can be performed even by the owners of buildings. The coating will imitate natural wood, therefore, an unsurpassed view of any structure is provided. Houses sheathed with block houses are attractive, durable and resistant to various influences.

Coating Care

A house finished with a block house needs specific care, because without proper maintenance, the finish will not last too long. For this, special processing is used, which consists in performing the following simple and understandable actions:

the cladding is covered with a high-quality primer;
painted with colorless paint or varnish.

How to paint the cover? For this, only a high-quality coloring composition should be selected, and it is desirable that it be colorless so as not to be disturbed. A painted house will serve for a long time, and also various influences of the atmosphere will not negatively affect the cladding.

Thus, a house lined with a block house is considered very beautiful, bright and unusual. It is protected from various negative influences, and a long service life is also guaranteed. At the same time, its thermal insulation parameters are improved, which leads to a reduction in the cost of heating a house.