Many today are interested in the question of how to make karambit at home. Moreover, it is necessary that it be possible to make it from improvised elements, without using expensive factory materials.

Manufacturing technologies

How to make karambit? The manufacturing technology is very easy and simple. To get started, you need a disk from circular saw. It is necessary to clean it from rust and grease, using Then, with the help of gasoline, it is necessary to carry out a complete degreasing.

For these purposes, you can use absolutely any solvent. Degreasing is necessary in order to protective layer The varnish held up well and did not fall off during electrical corrosion. You can use nitrocellulose varnish. It is good because it keeps well on the surface of the product and dries very quickly. For the best effect, it is necessary to apply three layers of varnish on each side of the disc. Apply varnish with a brush.

But if there was no brush at home? How to make karambit? It does not matter at all, since you can use an ordinary ear stick. The necessary model of karambit can be found in the shortest possible time. For convenience, you can print a picture that shows a karambit (drawing) so that it is always in front of your eyes. Then you need to carefully cut out the drawing of the knife. And with the help of undiluted nitro-varnish, glue the cardboard knife to the steel disk. We circle it with tin wire, which we connect to the negative contact from the power supply and, of course, to the disk itself. You can fix the wire with superglue, which will do an excellent job of this task.

Training

Then circle the knife model over its entire area and prepare for the oxidation process. It is quite long, but silent, which is positive moment in this case. The electrochemical reaction must be carried out until the knife model is separated from the steel disk. Three long reactions of this kind are enough to achieve the desired effect. The knife after such manipulations is quite easily separated. Then, using sandpaper and a file or a special electric tool, you need to move on to the process of turning the knife and bringing it into perfect shape.

Then using grinding tool it is necessary to carry out grinding on both sides of the knife.

How to make a karambit handle

How to make karambit with ease? In order to make a handle for it is necessary to use high-strength material. In this case, getinaks is perfect - resistant high-strength plastic. In addition, it is very well processed. It can be cut. The surface of the handle pads must be treated with coarse sandpaper.

Apply hydrochloric acid to the surface of the karambit handle for etching. The completion of the reaction can be determined by the matte surface of the metal. The reaction products can be washed off with ordinary cold water from the tap. Then dry the knife thoroughly and apply epoxy. You also need to apply it on the lining for the handle. When heated, excellent bonding will occur. After we carry out the final grinding of the knife to give beautiful view. And in the end, you can enjoy a karambit knife made with your own hands.

Precautionary measures

In taking up this business, you should understand that it can be easy for those who are familiar with and well versed in metals and all kinds of chemical reactions. When applied epoxy resin you need to be careful not to touch the knife with your bare hands. Carry out the sanding carefully. This kind of work should be carried out in a room that is well ventilated.

In this instruction, we will look at how easy it is to make a knife like a karambit. A feature of these knives is the curved shape of the blade. There are many versions of what these knives were intended for and where they originated. In most cases, these knives are associated with a tiger claw, and its purpose is self-defense. Such a knife lies comfortably in the hand and will instantly force the attacker to change his outlook on life.

There is also a version that these knives resemble a cockspur, and according to another legend, such knives were used for cockfights. There are also versions that such a knife can be used for some craft purposes, for example, to cut some plants. One way or another, let's hope that you will use such a tool for good.

It is not difficult to make such a knife, and you can get by quite simple tools. The product is all-metal, so no Additional materials you won't need. The author cut out the profile with a grinder.

If you need such a knife on the farm, then it makes sense to make it from high-quality steel. Steel with a high carbon content can be hardened. When cutting, carbon steel produces thick yellow sparks and is found in cutting blades, files, and other tools. So, let's take a closer look at how to make such a knife!

Materials and tools used by the author:

List of materials:
- carbon steel.

List of tools:
- Bulgarian;
- belt sander;
- drilling machine;
- drill;
- various files;
- sandpaper;
- forge furnace;
- polishing machine.

The process of making a karambit knife:

Step one. We make a template
First of all, we need to make a knife template. To do this, we produce some drawings on a computer or manually. Next, print the resulting drawing and cut it out with a clerical knife. That's all, the template is ready, circle it on the workpiece with a marker and you can start cutting. Before drawing the drawing, the author cleaned the metal on a belt grinder.

Step two. Hole
First, drill a hole with a bit in the workpiece. This strategic hole is designed for fingers. To securely hold the blade, most karambit-style knives have it. We drill a hole slowly, lubricate the bit well. We always securely fix the workpiece and in no case hold it with our hands, because if the metal breaks out, it will cause serious injuries to the hands.

Step three. Cut out the main rough profile
Let's start cutting out the main profile. For these purposes, the author used an ordinary grinder. To cut out the bends, we make a lot of transverse cuts, and then cut them out in parts. As a result, cloves will remain, which can also be removed with a grinder by installing a grinding disc.

Step four. Grinding
We go to the belt grinder and carefully grind the blade along the contour. It is important for us to remove all the notches and grind the blade of the shape that it was originally planned to be. In most cases, the author uses 400 grit tape.

Next, we have to manual processing. We clamp the workpiece in a vise and work with files different shapes. We process the blade along the contour, where we could not get close draw frame and also grind the hole.

Step five. Cut windows in the pen
In the handle, the author decided to cut out the windows, so the knife looks more interesting. To solve this problem, we take a drill and drill a series of holes of the desired shape. As a result, all the holes obtained are then combined using a file or the same drill. We carefully process the resulting windows with files.

Step six. We form bevels
It's time to form the bevels on the knife. To do this, we clamp the blade into a special bracket from the corners, since it will be difficult to hold it with your hands due to heating. The author forms bevels by eye using a belt sander. But first it would be nice to mark everything. The grit of the tape for such work can be in the region of 400 units. You should have completed all the basic metal work in this step, as the next step is to harden it and the metal will become strong.

Step seven. hardening
It is time to temper the blade, this will make it very strong. For proper hardening, it is important to know the grade of steel. We send the blade to the forge furnace, it is necessary to heat it until the metal is no longer attracted by the magnet, but these are only approximate figures. Well, then we cool the blade in oil.

Now the blade should be hardened, but after that the metal will become brittle, the blade can crumble just when it falls. We need to make the blade more elastic so that it springs back under load. For this, the metal is tempered. Commonly used household oven, the time and temperature regime choose depending on the grade of steel. On average, the blade is heated for about an hour at a temperature of around 200 degrees Celsius. The straw color of the metal will indicate the vacation. That's it, now we got the blade excellent quality.

Step eight. Finishing
Now, after hardening, the metal needs to be sanded again, or you can leave it as it is, this patina will act as a rust protection. We grind the planes on a belt grinder, with the help of which we also sharpen the blade. As for the holes, they can be processed with a drill. Alternatively, the author wound a piece of sandpaper onto the rod and clamped it in the drill chuck, this nozzle also works fine.

That's all, as a finish, you have to polish your creation on a polishing machine. That's all, the project is over,

Many boys, although there are probably also adult men, fans of the computer game Counter-Strike: Global Offensive think about how to make karambit from wood It turns out that everything is not as difficult as it might seem at first.

tiger claw

"CS: GO" is a popular computer toy for boys of all ages, over 13-14 years old. Its plot is primitive, but the arsenal used by the characters is amazing in its vastness. From bladed weapons to firearms - everything is used to carry out a rather controversial mission. Among the knives included in the KS-ki collection, as gamers briefly call the toy, the most notable knife is the karambit. It has the shape of a tiger's claw - the same curved and inflicting the same lacerated wounds. The handle of the knife has round hole under the finger - for a better grip, and also to flaunt such a weapon, scrolling it with all sorts of somersaults. You can buy an almost real karambit by ordering it in one of the online stores. And you might ask yourself,how to make karambit from wood with your own hands, and find a solution.

Base - thin plywood

It is enough just to cut karambit from several pieces of plywood, then glue them together, sand and paint. Such work resembles - the middle of the knife is the largest part, then the parts are evenly distributed on both sides, decreasing in scale. Such a toy will be safe enough, but quite realistic. A graphic layout of karambit is proposed in the figure.

And here are the individual parts indicating the thickness of the material used and the number of pieces.

Model Assembly

Having cut out all the necessary parts from plywood with a jigsaw, they must be cleaned of dust and degreased. For gluing parts, synthetic glue is suitable for wooden surfaces or casein. It is necessary to use glue strictly according to the instructions so that the layout does not crumble over time. When the kerambit dries well, a hole for the thumb is drilled or sawn out on the handle. This stage of work should be as accurate as possible so that the layout does not break. When everything is ready, the karambit must be sanded with a zero-sandpaper and again cleaned of sawdust dust. As we can see, the question of how to make a karambit knife from wood has a not too complicated answer.

solid wood

There is another option,how to make karambit from wood. But it is available only to those who confidently work with wood, feeling the wood, knowing the techniques and principles of working with tools for such creativity. Most suitable wood for crafts by hand - linden. The bar should be well dried, without cracks. The dimensions of the workpiece are taken slightly larger than the desired dimensions of the karambit. In order to correctly solve the problem -how to make karambit from wood, you need such tools for handicrafts:

• knives with a fixed blade made of carbon steel having a hardness of 55-60 RC (blades must be different in size and configuration);
• chisels of different shapes of the cutting edge;
• vise;
• drills of different diameters.

For such work, not only a drawing-scheme of karambit is necessary, but spatial imagination, which helps in the correct construction of the stages of work.

Below is a photo of what solid wood karambit will look like.

Artistic creativity

Little to knowhow to make karambit from wood, you also need to color it so that it looks like a real one. There are several options for coloring (skins) of a knife in the game Counter-Strike: Global Offensive: from " Pure water"to" Murder. "There are professional artists who, for a fee, manually paint karambit models like real ones.

But you can try to color your own karambit yourself. Best to use acrylic paints- they mix well, are harmless, dry quickly and do not get dirty. The skin can be viewed on the CS: GO website, or you can come up with it yourself. The main thing is to turn on the imagination and desire to make beautiful thing, similar to the real knife "Tiger Claw". Good luck!

Every CS:GO player wants a cool knife to show off to their friends.
To get a knife you need to: do, be able to trade or just buy for your money. But what if you don't feel like spending your money? That's right, you can print yourself a knife using the drawings.
Naturally, this knife will not be in the game, but at least somehow you can rejoice.

Drawings of knives

If you want to print a knife, and then draw it in high quality or make a knife out of corrugated cardboard, then we have attached screenshots for this, and with the help of them you can first print the knives, and then do what you want. I will say right away that making a real copy of a knife is not so easy, so set yourself up for the fact that you will sweat well. Having made a knife, throw links to photos in the comments and I will publish the best ones in the article.

Butterfly knife

This knife will be the hardest to make. Therefore, I advise you to make some simple knife first, for example - hunting knife. Butterfly will be the most difficult to make, because you will need to come up with something in order for it to spin. And to do this will not be so easy.

The screenshot is made in real size, so that you do not look for unnecessary sizes. By printing the knife, you yourself can measure what you need.

hunting knife

The peculiar shape makes the dagger a very interesting melee weapon. First of all, it is distinguished by its small size - from 3 cm, which is easy to hide in the palm of your hand, up to 10 cm. Although in games there are, of course, much larger specimens - up to 30 cm long. It is intended for inflicting ripping blows, that is, for removing the enemy from battle, immobilizing, and not killing. It is impossible to inflict a piercing deep blow with them, however, a ripping blow along the muscle completely disables this muscle.

Blows are applied to the arms and legs, where they are most effective. You can strengthen the blow if you scroll the karambit around the axis before the blow and inflict damage using the force of inertia.

The games use paper and wooden models of the CS:GO dagger. Well, how to make a karambit knife from wood can be found on the forums.

Manufacturing methods

How to make a CS GO dagger out of paper, plywood, wood or plastic is clear from the scheme used for this, of which there are many. In practice, they all come down to a few of the most popular ways, where ready-made templates make the largest parts and fasten them together.

Game weapons, as a rule, are distinguished by their elaborate appearance and complex configuration. It is much easier to fulfill this condition using paper. But to do the same from plywood or wood, experience is required. As easy as it is to process this material, it takes a lot of experience to make thin parts.

2 methods of working according to do-it-yourself drawings are implemented.

• In the first case, the main part is cut out of a material 12 mm thick and 2 nozzles 4 mm thick are fixed. The assembly of the product is easier, but it will take a long time to grind the blade to give it a conical shape.
• In the second case, the CS GO dagger is assembled from 5 plates cut from a material 4 mm thick. This option exactly follows the contours of the weapon, but close up it looks far from the picture. However, the imitation of a knife in close combat fulfills its function. In the photo - a knife made of wood.

Materials and tools

In fact, a karambit pattern made of wood is quite rare. Much more often, plywood is used as a material. Firstly, it is highly durable, secondly, it has an affordable cost, and thirdly, you can always find a material of any required thickness.

So when they talk about a wooden knife, they most often mean plywood.

From the tools you will need:

• a manual jigsaw or milling cutter, as a last one, you can use a grinder with a saw blade or a circular saw. The jigsaw is categorically not suitable for such delicate operations;
• ballerina or pen drill for sampling holes on the handle;
• sandpaper or a disc grinder is an indispensable participant in do-it-yourself manufacturing.

In addition, you will need PVA glue, impregnation - it is best to choose bakelite glue, and a coloring composition - use alkyd enamel or oil paint, as it is more stable.

How to make wood karambit

The manufacturing scheme is simple: you need to find a suitable drawing - there are quite a lot of them due to the wide variety of models. In addition, you need to sensibly evaluate your ability to work with wood or plywood. Then complete the blanks and fasten them.

The work is simple, but differs in a number of nuances.

1. A drawing of a karambit made of wood is transferred to cardboard or paper - this is how templates are obtained. The number of them depends on the complexity of the model. In the simplest case, 3 parts are required: the main part of the dagger - the blade and handle, and two curly attachments that provide a recognizable karambit relief.
2. The templates are outlined with a pencil and cut out with a jigsaw or cutter. The latter takes quite a long time. In the photo - cutting with a jigsaw.
3. The hole in the handle is cut with a pen drill. If there is no such device, you can do the work with a jigsaw. To do this, pierce with an awl through hole, then insert a file into the hole, fix it on a jigsaw and cut out the hole.
4. The parts cut out according to the drawing are lubricated with PVA glue and glued together. The structure is installed in a vice or clamped with a clamp until the glue is completely dry - usually a day.
5. Then the product is cleaned with sandpaper or a grinder. The knife must be perfectly smooth. If there is a desire to make it more durable, then the workpiece is impregnated with bakelite glue.
6. If the product is used in a role-playing game, it is dyed as in the picture.

The video discusses in detail the manufacture of kerambit from wood with your own hands.

Karambit knife - drawings for making this knife from different materials.

The knife is the oldest type of weapon. The first knives were made of stone and bore little resemblance to modern knives. Knife weapons, similar to modern ones, appeared when a person mastered metal processing.

The knife is considered a fairly versatile weapon, as it can be used both for peaceful purposes and in defense, defense, as an attack weapon. There are a great many varieties of knives, but the “karambit” knife is popular with the modern consumer of such products. What kind of knife is this, what are the features of its device and whether it is possible to make kerambit on your own, according to a diagram or drawing - we will try to answer all these questions in detail in the next section of the article.

Karambit knife: what is this knife

Karambit differs from other knives in that it has a curved blade and sharpening with inside. The length of the karambit blade can be different - from five to nine centimeters. The key feature of this knife is in the small ring on the handle, which is designed to make the weapon more comfortable to hold in the hand and prevent it from slipping in the palm of your hand.

The historical birthplace of the kerambit knife is the island of Sumatra. Local warriors of the Minangkabau tribe used such weapons in wars with other tribes.

You can buy a karambit knife in a specialized store, or you can make it yourself, both a real knife, made of metal, and decorative karambit - made of paper, cardboard or wood. If you have not found a ready-made kit for making karambit, then for future crafts you will need to find a drawing of a karambit knife.

One of the most popular materials for making a karambit knife is plywood. A plywood knife, of course, is not a real weapon, but it can be used in martial arts to practice weapon techniques, the same weapon can also be used in fantasy role-playing games that are so popular with today's youth.

The drawings of a plywood karambit knife can be the same as the drawings of a metal knife. You just need to find a sketch of the blade and modify it to fit the finished dimensions. You can easily download drawings of a karambit knife from specific sites about weapons - there you can even find templates that are quite ready for work.

Cs Go is an abbreviated version of the famous Counter-Strike game. One of the types of weapons in this game is just a karambit knife, and therefore many fans of this military toy are interested in where to get a drawing of a kerambit knife from Cs Go?

The drawing can be found in ready-made sketches that are posted on forums and sites dedicated to this game, but you can also draw a drawing yourself. However, remember, if you have never made knives with your own hands before - do not be zealous with an abundance of details, but choosing a karambit knife from ready-made drawings - look for pictures that will clearly show all the details and marks.

You can also make drawings for a karambit knife in a graphic editor - modern programs will allow you to create a high-quality sketch of a karambit knife, even if you don’t know how to draw at all.

For karambit knives made of wood or paper, drawings can be adapted to any you like. The finished drawing of a karambit knife can be printed on the desired scale, and then made into convenient templates or simply transferred to the material to cut blanks.

You can also see how to make a drawing of a karambit knife on detailed video instructions that are posted on the sites by craftsmen who have perfectly mastered the secrets of making a karambit knife with their own hands.

Edged weapons have been attracting with their brilliance, hidden power since the time when people just started to master metal processing. The legendary karambit is a knife with a rich history. The first mention of it dates back to the 14th century among the Minangkbau people inhabiting the island of Sumatra. There it was used in wars with other islanders, and in civilian life it was used for household needs. How a novice artist can cope with the task of creating an image of a weapon on paper with the greatest realism, how to draw a karambit easily and quickly so that the image turns out beautiful and original, we will consider below.

Origin story

Easily recognizable due to the peculiar curved shape. On the handle, it has a hole for the index finger, and the sickle-shaped blade, ranging in size from 3 to 10 centimeters, is sharpened on the inside. In order to use a knife in combat, it is important to have special equipment. Hold it with a reverse grip, directing the blade away from you. There are three main versions of the origin of karambit, each of them is interesting. If you believe the first version of the origin, then this knife came from a sickle for harvesting crops - indeed, there is a similarity in the shape and processing of the blade. The next version says that for greater expression in cockfights popular on the island, small curved blades were tied to the birds' paws. This hypothesis is supported by the translation of the phrase Karambit Lawi Ayam - "rooster's spur". The third option claims that from the very beginning it was a military weapon, and the Indian brass knuckles served as a model for it. Without discussing the excellent qualities of these knives in close combat, it is worth noting that they are valued for the elegance of lines and external beauty. How to draw a karambit in order to fix its image on paper, consider below.

Preparation for work

It is very important to prepare for the drawing process. To engage in creativity, you should understand in what technique the drawing will be performed. Minimum set necessary materials- a sharpened simple pencil, an elastic band, a sheet of paper. Consider the instructions on how to draw a karambit step by step with a pencil.

Drawing technique

Karambits can be different. There are several modifications of classic Malay knives. How to draw a karambit that will look organic? The curved shape and the hole on the handle are its main difference. The basis of the image is a set of simple shapes.

1. The first step is the orientation of the silhouette on a sheet of paper - we draw the contours of the future knife strictly in the center.
2. Next, we improve the handle, carefully drawing the details - a round hole for the finger, the bulge and unevenness of the handle, the heads of the fixing bolts. With a soft pencil, add volume to the drawing with the help of shadows.
3. The next step is the blade. In order to give the blade the effect of sharpness, use a hard pencil to draw.

The initial sketch of the image is ready.

final stage

The final stage of the description of how to draw a karambit in stages, we will consider in detail. Gently remove excess contours with an elastic band. Pay attention to the relief details - carefully blending the lines, form dark and light areas on the paper. Now that the sketch is finished, you can draw a picture with colored pencils.

The essence of phased drawing is the gradual reproduction of the image. Detailed description, which describes how to draw a karambit, is useful to a novice artist. Consider the diagram in detail, the technique for creating a drawing will become clear even to an inexperienced amateur.

I want to apologize right away for such an accordion and bearded post, because the topic is already hackneyed and everyone is tired of it. But nevertheless, I still come across questions everywhere, such as: how to make kerambit out of paper with your own hands, where to get a kerambit scan, throw off the kerambit drawings and so on. At the same time, the Internet is already bursting with all sorts of drawings of this knife, but in order to already stop these questions on our website, and just so that we also have it, I post three karambit scans in pdo execution.

The first scan of Karambit made of paper in a performance that is not quite familiar to us. It's more of a drawing. But in fact, making paper karambit with your own hands thanks to this scheme is easier than it seems. Details in such a scan act as stencils. We translate them into blueprint/cardboard/wood/plastic and cut out as many parts as needed to build up the required thickness. Then we glue the whole thing together in a certain sequence of overlays. Next, we sand the corners, finish, paint ... in general, then we already bring to mind. If you really need it, I will make a video, but without much desire, to be honest.

The second version of Karambit made of paper is already in a more familiar form for us, but the scan, to be honest, is not very good. Firstly, it is not as close to the original as we would like. Secondly, the blade, ring and lining are not connected to the handle with valves, you need to glue them yourself, pervert them. Thirdly, the complexity of the assembly is quite high, but still takes place. Well, what kind of sweep to choose to make karambit with your own hands, it's up to you.

The third unfolded drawing of Karambit paper was made and provided by the user Replica. Quite an interesting development and approach. One half is the Pepakur version that we are used to (but it seems unrealistic to glue it together), the second is a model in section, which must be assembled from parts, like the first. However, this version of the "setting plates" will turn out to be much more textured than the first option. But there are no upper linings. Perfect option combine the first version of Karambit and this one.

The history of knives goes back to the time when people only mastered the processing of materials. The first copy was made of stone, although it is very difficult to call it a normal knife, it looked more like a scraper. Then metal casting was mastered, and the weapon began to take on a shape closer to the modern one. A knife is an almost universal tool that can be used both for peaceful purposes, for example, for cooking, creating clothes and other products, and for military purposes - to resolve various kinds of conflicts.

There are a huge number of knives. Some are made for everyday use, while others are in service. One of the most versatile products is the Karambit knife. It can be used by civilians, although some models are in service with various armies. What does a karambit knife look like? What is the price? It is very difficult to find answers to such questions, as manufacturers use different metals to receive the product.

What is "karambit"?

"Karambit" has a slightly curved blade, as well as sharpening on one side, usually on the inside. On average, the length of the blade varies from 5 to 9 centimeters. It is very rare to find one and a half sharpening of such a product. The main feature of "karambit" is a small ring. It sets the knife apart from all other products. The ring is located on the back of the handle. It is designed to prevent the hand from slipping onto the blade, as well as for a more comfortable and secure grip.

It is quite convenient to hold the "karambit" knife with a direct or reverse grip, while the little finger or index finger is threaded through the ring, as with a reverse grip. At present, the production of this type of product is on a grand scale, and each time more and more new models appear. Thanks to this, now you can find not only knives that have a ring near the heel of the blade, but even products with two rings located on both sides of the handle.

For greater ease of wearing, a folding knife "karambit" was created - this option does not require the purchase of a sheath and is more convenient for everyday use. It is worth noting that folding "karambits" are no longer what they mean by the classic name of this cutting product. There is no limit to the fantasies of the masters.

The history of "karambit"

The islands belonging to the Malay Archipelago are considered to be the birthplace of this legendary knife. Some historians and researchers geographically more accurately determine the place of origin of this element - this is the island of Sumatra.

It was the Minangkabau people, who inhabited mainly the western part of the island, who used such curved knives in their wars with the rest of the islanders. The oldest image of "kerambit" was dated to the fourteenth century.

Versions of occurrence

There are several different versions of the origin of "karambits". It is worth noting that none of them can be accepted as 100% true.

The first version says that "karambit" is a kind of derivative of the tool that was used in agriculture the peoples of Malaysia. Simply put, according to this version, the product is based on an agricultural sickle, which was used to harvest rice fields. In favor of this version, one can draw a certain parallel between the modern knife and the combat sickle called "kama", which was popular on the territory of modern Japan.

The second hypothesis says that the "karambit" knife was used during the formation of the Malaysian archipelago for cockfighting. To give greater dynamics and drive, small knives were tied to the paws of the fighting birds, which had a curved shape, which resembled a cock's spur. Based on this, there are two options for translating the word "karambit" itself: "cock spur" and "feather from the tail of a rooster."

There is a third version, which says that a military weapon was originally created, and its ancestor was a certain brass knuckle equipped with special claws. Such a device was common in the territory of modern India.

Variety

On the modern market knife products, there are several varieties of Malay "karambit", which are considered to be classic. These are the so-called "fathers" of all modern knives, from which the further improvement of products began.

"Minang"

This knife can be considered a classic "karambit", which has the shape of a weapon of the Minangkabau people. This product is distinguished by a characteristic ring, which is made of wood and is used to hold the weapon with a finger. Another sign that the "karambit" knife possessed was a strongly curved blade. Based appearance and analysis of the shape of the blade, the researchers came to the conclusion that just the ancestor of the "minang" is the sickle, which was used in agriculture.

Knife "karambit" in service

Due to all its almost unique properties, this product is used by many police officers. Such a knife acts as a kind of addition to the main firearms. IN Lately in the United States, police officers were often attacked, so many officers preferred a folding "karambit" and began to carry it with them.

Folding knives are also available for marshals who escort aircraft under the guise of ordinary passengers. This is necessary to prevent the seizure of the aircraft by terrorists. Although some carry firearms, the specifics of air transport are such that they cannot be used during the flight, only in exceptional cases.

Work technique

The Karambit knife is a personal weapon. In terms of its size and diameter of the ring, it should correspond as closely as possible to the anatomical parameters of the owner.

"Karambit" can be used as a primary and secondary weapon. It is often used in pairs. With one knife, a fighter must be active enough with his free hand to perform a variety of grips, blocks and strikes. Therefore, you should carefully read design features weapons to take it into account in combat.

Since the "karambit" knife is used only at fairly close distances, how a person moves during combat is very important. To date, there are two main grips - direct and reverse, as well as their varieties. Where can I buy a karambit knife? How much does such a product cost? It all depends on the technique of execution and the type of metal from which the weapon is made.

Reverse grip

Reverse grip "karambit" is the classic way holding the knife. In this case, the handle is covered with all fingers, while the index is threaded into the ring, and the blade is placed at the base of the fighter's fist. At this time, the thumb can be pressed, as when punching, or it can lie on the surface of the ring. How to hold a karambit knife correctly? The photo in the article will help you figure it out.

Direct grip

This type of grip is very different from the reverse in that the blade comes out from the side. thumb, while the little finger is threaded through the ring. People who use the "karambit" knife in the computer game Counter-Strike are familiar with such tricks. CSGO- a new version team shooter that captures from the very first minutes. Here the player can freely use both firearms and melee weapons, including "karambit". Although in real life, such a product looks intimidating. It is this "karambit" knife, the photo of which is given below, that is used by gamers in the virtual world.

Basically, a direct grip is used to hold small knives, as well as karambit-like products, which are often used for personal self-defense.

Making at home

Many people, after acquiring a "karambit", decide to try to make it on their own. As practice shows, this is not always as simple as it might seem at first glance, although many succeed. In order to create a "karambit" knife with your own hands, you must have at least basic knowledge in the field of metal processing, as well as have the appropriate tool and material. There are several options for performing "karambit".

The first method is the use of a blade from a pendulum saw as a blank. As a rule, steel grade R6M5 is used in such construction tools. The essence of the method lies in the fact that a blade of a certain shape must be cut out of the workpiece using a grinder or an emery wheel. For accuracy, the "karambit" knife scheme is used. When using this method, there is no need to apply heat treatment, but it is worth remembering that the main thing is not to overheat the product during the manufacturing process. For achievement desired result you definitely need an exact drawing of the "karambit" knife, only then an almost perfect copy will be obtained.

A more complicated way is to make a knife from a spring. As a rule, 5160 steel is used in this case. In order to obtain the desired product, the spring is drilled along the contour of the future knife, then the initial shape is given with the help of a metalwork tool. For knives that are made in this way, further heat treatment is necessary. You need to harden and release the blade. If necessary, this can be done on a home gas stove.

Most best option making your favorite knife - buying a ready-made kit that is designed to create a tool. This, as a rule, includes an excellent blade, a small piece of wood for a future handle, as well as a piece of leather or other material for creating a scabbard. Such kits are mainly supplied by the Norwegian company Helle.

The forged billet consists of three layers of alloy steel. This material is great for making knives. In the case of using a set of work, much less. This is a great way to turn your fantasy into metal. Do-it-yourself "karambit" knife will be of excellent quality, but at the same time it will have a unique design. Much depends on your imagination. To simplify the task, you can find a ready-made drawing of the "karambit" knife and make your own version of it.

Price

The price of a "karambit" knife can vary due to several factors: the manufacturer, the manufacturing technology and the material from which the blade was made.

On average, the minimum price is from 35 to 40 dollars - these are small folding knives. For 450-500 dollars you can buy high-tech branded products. Sometimes the price of a blade directly depends on the company, namely on the brand, on how it is promoted. In this case, do not be surprised if two almost identical knives, but only from different manufacturers, will have different values.

conclusions

In the article, we examined in detail what a "karambit" knife is. Now let's write down its main advantages and mention some disadvantages.

Advantages of "karambit":

• Due to the specific design, the owner has an advantage in a fight with an opponent.
• Regardless of the type of grip on the handle, there is the most efficient transfer of all body energy that can be put into a strike.
• Excellent control, as well as a high degree of sensitivity when compared with a conventional knife.
• It is very difficult for an opponent to disarm a fighter.

Cons of the product:

• Due to the strong curvature of the blade, there may be problems with removing the blade from the sheath.
• A very limited scope for striking, it does not matter - stabbing or cutting.
• In most cases, only the reverse grip is used, since this position is more convenient.

The "karambit" knife (CS:GO is one of the shooters where you can see it) is a fairly popular product, as it is implemented even in computer games. It is worth remembering that this is a very dangerous weapon that has a long history. This fact should be remembered by every owner and those who only plan to purchase a "karambit" knife. The price of such a product is not always high, but when choosing, you should pay attention to the quality of the blade, on which its cost depends.