Do-it-yourself ottoman 5 in 1 drawings. Do-it-yourself chipboard stool

In order to have a new comfortable and original piece of furniture in your home, it is not at all necessary to go to the store and spend a lot of money. Of course, it’s better to buy a sofa or a bed, but it’s not difficult to make such an interior detail as an ottoman with your own hands.

In addition, if you decide to start making an ottoman, you can make it the one that best suits your design.

You can choose the desired shape, material and color. However, this is not the only advantage of homemade ottomans, since its manufacture may cost nothing at all.

Soft puffs

The easiest way is to sew a frameless soft ottoman yourself. To make it, you only need a piece of fabric, stuffing material and a sewing machine.

Although if there is none, then it is quite possible to do without it by sewing all the details by hand. In order for your ottoman to be even and look beautiful, you need to make a pattern out of paper. It should be a square, at the ends of which triangles will be located.

According to this template, it is necessary to cut out 8 identical parts from the fabric, not forgetting to leave allowances for the seam. Moreover, you can use both one piece of fabric, and materials of different colors and textures for each of the parts cut out according to the pattern.

After all the details are ready, you need to stitch them together to form a figure similar to a ball. And in order for the ottoman to be stuffed, bend the top on the triangle of each of its parts inward.

Filler

In order for the pouf to keep its shape, a synthetic winterizer or foam rubber is well suited. But other materials can also be used. As such, even scraps of fabric are suitable.

To give the ottoman a finished look, you need to close the remaining hole by sewing a circle of material with finished edges. If the edges of the part round shape difficult for you to process, then it can be cut in the shape of an octahedron.

You can simplify the task and sew a pouffe from two round parts that will be the top and bottom of the product, and two rectangular parts that are the sides of the pouffe.

The height of the ottoman can be adjusted by the width of the rectangle. But the length should always be equal to half the length of the cut circle.

By sewing rectangular parts, stitching a circle to them and filling them with filler, you can get a round ottoman that will be soft and light. It will become not only a practical piece of furniture, but also a wonderful toy for children, which is impossible to get hurt.

A cube-shaped ottoman is made in the same way. In this case, instead of two rectangular parts and two circles, you will need 6 squares. Making a cube out of them is not difficult. And if a hidden zipper is sewn into one of the faces, then it will be possible to change the filler and wash the cover.

Pouffe from plastic bottles

An ottoman can be made with your own hands and from plastic bottles. They, of course, must have the same volume.

To do this, the upper part of the bottle, where it begins to narrow, must be cut off and put on the part left without a lid on another bottle of the same type. Repeating this procedure with other bottles, we form a round design of them.

In order for the bottles not to deform and the pouffe not to lose its shape, we fasten them with adhesive tape.

A little trick is that the bottle, which is inside other similar ones, fastened with ordinary transparent tape, can be pasted over with double-sided tape and glued to inside the rest of the bottles.

Note!

In order to close the upper and lower areas, it is necessary to cut a circle from cardboard or chipboard according to the diameter of the connected bottles. We glue foam rubber to these circles, and wrap the pouffe outside with it.

It remains only to sew a cover for the finished ottoman. On the circle of its upper part, you can sew a zipper.

Such furniture will save filler. And if the cover is made of raincoat or water-repellent fabric, then such furniture can even be placed on the street.

In addition, as you can see in the photo, round ottomans made without a frame and containing inside plastic bottles, are virtually identical in appearance.

Pouffe with cover

In order to make a pouffe similar to those sold in stores, carpentry skills and some tools are needed. To begin with, it is worth cutting out 4 rectangular parts from chipboard 33 wide and 40 cm long.

Note!

Use wooden blocks to fasten them together. A square with a side of 40 cm is attached below. As a result, you should get a kind of box.

This blank from the inside with the help of a construction stapler can be sheathed with material. The square, which will act as a cover, is also sheathed with material from below. And the top, before being covered with upholstery fabric, is pasted over with foam rubber in order to give the ottoman softness.

Along the entire outer perimeter, the pouf, like the lid, is wrapped with foam rubber. And only then upholstered with material. Loops are used to attach the lid to the cube. To give this piece of furniture mobility, you can attach furniture wheels to the bottom.

It is even easier to make an ottoman with a lid from a bucket, large pot or other utensils and equipment.

The main thing is that, like a pouf, they have a removable or opening lid. Then you just need to wrap the workpiece with foam rubber or other soft material and put a cover on it.

All homemade ottomans can perfectly fit not only into the interior of the apartment, but it is also a great option for giving or outdoor recreation. After all, ottomans are light, mobile due to their size and comfortable pieces of furniture.

Note!

They are very suitable for children's rooms, giving the kids the opportunity to comfortably sit on them, or even build castles using pouffes as blocks.

It is much more convenient to use such a piece of furniture to sit down at a low coffee table, because a homemade pouffe can be made of any height.

DIY ottoman photo

Sometimes you really want to update the interior, give it a new style, and additional pieces of furniture will become the most suitable assistants in this matter. And if it’s easier to buy a wardrobe or a sofa in a store, then making an ottoman with your own hands is very simple.

Ottomans came to us from the East many centuries ago, and immediately gained popularity. In the recent past, they occupied an important place in city apartments with small footage, since they simultaneously served as a table, an armchair, and a footstool.

Homemade ottomans have a lot of advantages compared to store-bought ones. You will be able to choose suitable shape, size, color and material type. In addition, in the manufacture of such an ottoman, you can use any means at hand, and such a piece of furniture will cost you almost free.

Soft ottomans: simple and easy from what is at hand

Taking up the manufacture of an ottoman, tune in to the fact that you can handle such a simple and easy job without any special worries, and we will help you practical advice and advice. You will need:

Sewing machine;
Textile;
stuffing material;
Paper to apply the pattern.

First, prepare a pattern using the diagram below. Lines B and C on it indicate the places where the paper is folded. It also shows how the template will look in expanded form.

1. Take the unfolded template and attach it to the fabric. You will need to cut 8 identical pieces of fabric. Not to spend money on new material, use old clothes.
2. On each blank, bend an acute corner inward by 5-6 cm and sew so that after assembling the pouffe, an octagonal hole remains in the upper part, into which the stuffing will be placed.
3. Stitch the blanks from the inside in pairs to each other (during cutting, do not forget to leave a seam allowance of 1 cm over the size of the pattern). Thus, you will get 4 parts from 2 blanks stitched together on one side.
4. Sew 2 pieces in the same way: these will be the two halves of your pouffe. Sew them together and turn the cover inside out.
5. Stuff the finished pouf cover with the selected material (it can even be scraps of fabric). Cut another piece to fit the remaining hole, finish the edges and sew by hand.

Tip: It is not necessary to use fabric of the same color for the ottoman. A multi-colored ottoman will enliven the interior, especially in a children's or teenage room.

Such an ottoman is very soft and light, small children will be happy to play with it, and you don't have to worry about their safety.

An even simpler scheme for making an ottoman

There is not always time and desire to mess around with patterns, so we offer you another, very simple option.

Cut out 2 circles from the fabric. Their diameter should be equal to the diameter of the top and bottom of the product. Don't forget to leave seam allowances!
Now cut out 2 rectangular pieces of the same size. Their width will be the height of the pouffe, and their length will be half the circumference of the upper and lower parts.
Sew the rectangular parts together across the width on one side to make a long ribbon. Baste one of the circles to it and stitch along the seam. Do the same with the second circle. If the seam is not even or neat enough, you can sheathe it with a decorative border.

In this way, you will quickly and easily make a pouffe cover that is easy to stuff with any suitable material. It remains only to sew a zipper into the unstitched edges of a rectangular tape.

In the same way, you can make a cube-shaped pouffe. The only difference is that the pieces need to be square in shape, and for the sides you will need four pieces of fabric instead of two. Sew the details together, and in order to more clearly indicate the edges of the cube, use a canvas in a contrasting color. A denser fabric will give extra elasticity and help keep the shape.

Please note: a synthetic winterizer and foam rubber are perfect for stuffing such a pouffe. These materials do not deform and keep their shape perfectly.

Make a hole through which you will place the stuffing material from the bottom of the pouffe so that it is invisible. Optionally, you can stitch it tightly after the pouffe is stuffed, or sew in a zipper to be able to change the material if necessary.

We use improvised means: an ottoman made of plastic bottles

This option will allow you to significantly save on stuffing materials. The interior space of the ottoman is filled with plastic bottles. So, you will need to stock up on the following:

Plastic bottles of the same shape and volume;
Thick cardboard (use cardboard boxes, just make sure that they are not damaged);
or synthetic winterizer (you can also use insulation or several layers of dense fabric);
Scotch;
Glue;
Scissors.

Cut out two identical circles of the diameter you need from cardboard - these will be the top and bottom of the ottoman. Set the bottles on the bottom circle so that they fill the entire space and tie them tightly with tape. Cover with the top circle and rewind with tape so that all the parts are evenly and firmly connected to each other.

The base is ready, now we start finishing the ottoman.

From the insulation (foam rubber, synthetic winterizer), cut out two circles and a rectangle. Details should be slightly larger than the base elements, taking into account seam allowances. Connect them together and sew by hand with tight stitches.
Sew a cover for your ottoman according to the same principle as in the second paragraph of this article.
You can add to finished product additional functional element in the form of a strap. It will make it easier to carry and will surely appeal to children who will be happy to carry such an ottoman with them as a toy.
If you plan to make an ottoman that you will use yourself, take a denser fabric for the cover and insert a border along the seams. For a children's ottoman, you will need soft material with colorful colors. It is advisable to use a denser layer of foam rubber.

This ottoman is not only easy to perform. By making it yourself, you will save yourself from the need to recycle plastic bottles, and this is already a great reason to take part in the fight for a clean environment!

A new look at old things: we make furniture from clothes

This is not a fairy tale or fantasy, an old sweater can really turn into an original ottoman, not only very comfortable, but also a noticeable element of the interior. Making such a piece of furniture is very simple, because the main condition is an original, bright, beautiful or funny pattern on the sweater that you will use in your work.

So, you will need:

A sweater that you will no longer wear, but it is a pity to throw it away;
Scissors;
Threads and a needle;
Felt;
Fabric for the cover (lining material is perfect);
Styrofoam for stuffing.

From the felt, cut the bottom of the ottoman into a round or square shape. This part will serve as the primary blank. Take the sweater and turn the sleeves inside out, sew the remaining holes with an even seam. Sew the felt blank to the bottom of the sweater to make a bag-cover.

Tip: Using plain sweaters with large ribbed knits, such as rhombuses or braids, you will get an amazing classic-vintage ottoman that will look great in any interior. Such knitted patterns are suitable for square and rectangular shapes.

Now you need to prepare a cover made of lining dense fabric for expanded polystyrene. If your primary blank of felt is round, then you will need one piece of fabric of the required size (for example, 50 cm wide and 70 cm long), but if you decide to make a square ottoman, then calculate the required dimensions for four parts.

Sew all the pieces together, and leave a hem at the top for the lace, which will tighten the lace after you fill it with stuffing. The cover should be filled after you place it inside the sweater. Tighten the lace as tight as possible so that the filler does not wake up, straighten the sweater and enjoy your new piece of furniture!

Non-standard solutions in the manufacture of ottomans

Soft ottomans can be of any shape, even spherical. It will be easy great option for, which will become one of your child's favorite toys.

An ottoman ball is easy enough to make yourself, for this you will need:

Sewing machine;
Threads;
Needle;
Scissors;
High density fabric, two colors;
Graph paper for pattern making;
Polyethylene;
Silicone filler in the form of balls.

The process of creating an ottoman ball consists of the following steps:

1. First of all, you need to make a pattern on graph paper, observing the required dimensions. To make it easier, use a round object, such as a large balloon or floor lamp shade. Measure its circumference, and divide the resulting size in half. Divide this number into 5 parts so that 3 middle and 2 extreme are the same size. You will get the diameter of the base in the form of a circle and the width of the stripes that make up the spherical cover of the ottoman.
2. Transfer the resulting markup to the item you have chosen, starting with the circle part. Draw the next line down the pre-calculated bandwidth.
3. Take it, cut it along one side and cut off the bottom. Straighten and lay on the marks of the first strip, secure the edges with tape. Transfer a quarter of the strip to polyethylene and cut it out. In the same way, prepare the part of the middle strip. Transfer the pieces to graph paper before cutting.
4. Now the details of the ottoman need to be cut out of fabric in two colors, leaving 1 cm for a seam allowance. Sew them into strips, leaving one side open, and iron them out.
5. Attach the first strip to the round piece. The ends of the strip must exactly converge with each other. Stitch them and connect the round base with the strip with a seam, stepping back 1 cm from the edge.
6. Sew a similar blank for the opposite side of the cover and stitch to the middle strip. At the same time, do not overfill the ends of the middle strip. In the same way, grind the second semicircular blank with middle lane and iron the seams.

The cover for the ottoman-ball is ready, you just have to fill it with filler. To make the shape elastic, add small pieces inside. Close the hole with a hidden seam.

We complicate the task: a wooden ottoman with a box for all sorts of little things

If you have skills in working as a carpenter, then you can easily make a fairly simple, but very beautiful and functional ottoman with a wooden drawer on wheels. In such an ottoman you can put toys, magazines, shoes or clothes. For it you will need:

laminated board or chipboard sheet for making a circle with a diameter of 30 cm and 4 rectangles 40 X 33 cm;
4 wooden beams with dimensions 4 x 8 x 8 cm;
PVA glue;
furniture wheels - 4 pcs;
metal corners- 4 things;
self-tapping screws;
screwdriver (screwdriver, drill);
foam rubber for stuffing;
fabric for the design of the cover;
sewing machine.

Take the pre-cut chipboards and connect them to make a box 40 x 40 cm wide and 30 cm high. Additional glue the joints.

Place on the bottom corners of the box. Fix them with self-tapping screws, smearing with glue for a more reliable fastening. Attach furniture wheels to these bars. Install the cover with glue and screws.

The frame of the ottoman is ready, now you need to sew the cover. Take a special furniture fabric, it wears out less. According to the shape of the lid, open the top of the cape, and sew a strip of fabric 10 cm along the contour. Here you can also sew ruffles, drapery, canvas to your liking.

Lay a layer of foam rubber on the cover of the ottoman to ensure softness. Pull the cover over the top. For its implementation, you can use any fabrics and decorative elements.

Video about creating an ottoman with your own hands

As you can see, it is very easy to make an ottoman with your own hands, and the photos that we posted in this article will help you. Share with us in the comments your experience in the manufacture of such pieces of furniture, and we will be happy to discuss with you all the subtleties and features of such work! Comfort to your home!

Who would not like to update the interior of an apartment or house? In such cases, various additional furniture is used. Traditional sofas are much easier to get in furniture showroom, but it is more interesting to make ottomans on your own. You can learn how to make an ottoman with your own hands from this article.

The ottoman appeared in Eastern Europe many centuries ago, the birthplace of ottomans is the East. These items quickly gained great popularity. Recently, they were given an important place in small city apartments - a soft ottoman is multifunctional.

Someone will say, why do it yourself, if now you can buy everything? Yes, this is true, but home-made furniture has a lot of advantages compared to factory-made furniture. So, the color, size, shape, type of upholstery is independently selected. For the production of poufs, any improvised materials that are in the house are suitable. So, you can make puffs with almost no investment. See how easy it is to make a pouffe with your own hands from different materials.

Before starting work, you need to tune in to simplicity and ease. For those who decide to make poufs with their own hands, master classes by the best needlewomen will help in their work - all operations are described step by step. So, for this to work, you need the following - this is sewing machine, fabrics, padding materials, and paper. A pattern template is applied to it.

How to make a soft pouf:

1. First of all, we will make a pattern - there are many options, they are easy to find and choose what you like. Then the template is transferred to paper, and then to the fabric. Eight blanks are cut according to the template from the prepared fabric. You can buy new fabric or use old clothes as material.

2. On each of the eight blanks, an angle is folded inward by 5-6 cm, and then stitched. This is done so that after assembly a hole is obtained in the upper part - through it the stuffing will be laid into the puffs.

3. Then we sew the workpieces from the wrong side with each other in pairs. In the process of cutting, do not forget to leave an allowance - 1 cm from the size of the pattern. So, you should get 4 parts.

4. Two more elements are also sewn - these are two halves of the product. Then they are stitched together and the product is turned inside out. The finished cover is stuffed with pre-selected material, and then another piece is cut out according to the shape and size of the remaining hole and manually sewn to the cover.

Sewing a cover for an ottoman is not difficult at all, and the result is a cute and original furniture. It is not necessary to use fabrics of the same color - multi-colored products will make the interior more alive. Especially different colors relevant for children's rooms. A bright pouf will appeal to young children - they will play with it.

On video: soft handmade pouf

Classic ottoman

We make ottomans with our own hands in a classic style:

1. It is recommended to start with the legs. To do this, take two boards - the length is 48 cm, the section is 5 × 5 cm. They are cut at 45 degrees, and then knocked together - the result should be a cross. Then another bar is glued to the cross with glue on wood - its length is 35 cm. For reliability, it can also be fixed with a self-tapping screw. The same crosspiece is attached to this bar.

2. The seat is made of plywood or chipboard - they take material 10 mm thick, dimensions - 40 × 60 cm. Foam rubber is placed under the plywood sheet. The layer thickness is 10 cm. Foam rubber is also laid - the material must be cut off with a certain margin so that it bends. The foam rubber must be bent and nailed to the plywood sheet. Take upholstery fabric and fasten from the wrong side of the sheet. Upholstery is best fixed with decorative nails.

3. Cross-beam boards are additionally nailed to the crosses. Then wooden structure treated with stain. The seat is attached to the base and legs. The result is a cute pouf.

Option from an old tire

Motorists in the garage accumulate tires - they will make original furniture. Let's see how to make a round ottoman with your own hands:

1. Take plywood and cut two round pieces out of it. One circle should measure the inner diameter of the tire, the second is cut out along the outer diameter. The legs are made according to the pattern. The template is circled and the workpiece is cut out from a suitable board. For a do-it-yourself ottoman, you will need four elements.

2. The legs are fixed on a circle with a large diameter - this is the base. Details are fixed at the same intervals. You can strengthen the structure with bars. Pre-blanks for the legs are painted and glued to the base. Additionally, you can strengthen the fastening with corners.

3. Then a layer of glue is applied to the base with legs and a tire is applied on top with rim. Next, the glue is smeared on the cover, and also glued to the top of the wheel. Then the tire is wrapped and pasted over with a rope - you can glue it on hot glue. Great if you use a rope of different colors. After that, the legs are painted.

These pieces of furniture will not be too soft, but this is an original solution that can decorate any interior.

On video: pouf from car tire with your own hands.

Wooden model with storage box

For manufacturing, you must have skills in working with wood. It will be a practical and soft ottoman with a convenient and multifunctional drawer. Wheels will be installed at the bottom for better movement.

For production, a laminated chipboard is required - a circle will be made from it (circle diameter 30 cm), and 4 rectangular blanks (dimensions 40 × 33 cm). You should also prepare four bars with a section of 4x8x8 cm. You will need glue, furniture wheels, fasteners, self-tapping screws. Of the tools, only screwdrivers are required, but a drill or a screwdriver is better. Foam rubber will be used for stuffing, fabrics for decoration.

To sew covers for an ottoman with your own hands, it is advisable to have sewing machine. Consider a step-by-step instruction:

1. Take sheets of chipboard and connect them to make a box. At the joints, the box is glued. Bars are placed at the lower corners, fixed with self-tapping screws and additionally coated with glue. Wheels are fixed on the bars from below. The cover is attached with screws and glue. The frame is ready - now you need to decorate what has been done.

2. They take furniture fabrics - they are less prone to wear. According to the shape of the lid of the box, a pattern is made for the upper part of the cape. A strip of fabric 10 cm wide is sewn to it and we sew a cape. How to sheathe an ottoman, fantasy will tell. A layer of foam rubber is placed on the lid for softness. Pull the cover over the top. The soft pouffe is ready.

To update the interior of the room, it is not necessary to start a renovation. An additional piece of furniture made by yourself will help to change and revitalize the interior. One of the practical and stylish things in the room can be a do-it-yourself ottoman. Homemade pouffes have a lot of advantages over store-bought poufs, as you can choose the shape, size and material for making them yourself. In addition, when creating a masterpiece, you can use any materials at hand, so a do-it-yourself pouffe will cost almost free. Today we invite you to get acquainted with non-standard ideas that will help you create a unique and striking piece of furniture for any room.

How to make an ottoman with your own hands from improvised materials?

Ottomans came to our everyday life from the East many centuries ago and almost immediately gained popularity, since this piece of furniture could serve as an armchair, a table, and a footstool at the same time. Today, craftsmen offer a lot interesting options making cute options from improvised materials. Making an ottoman with your own hands is not a difficult job, but very exciting, besides, a thing created by yourself radiates special warmth and has an aura of home comfort.

Plastic bottles as a basis for a pouffe

If you do not have the desire to cut out, cut out the base for the pouffe, then you can use plastic bottles for this purpose, which are available in any home in unlimited quantities.

Important! The color of the bottles in the finished product does not matter - you can use any bottles of beer or water with a volume of 1.5-2 liters.

To make a high-quality and stable ottoman, you will need:

16 bottles of 1.5 liters or 9 bottles of 2 liters. Use bottles with caps

Important! From round bottles you can create a large circle, square or rectangle. Choose the shape of the product according to your desire and preference.

Packaging cardboard. Any cardboard from household appliances, which has not been thrown away for years, can be used to make a pouffe.
Scotch.
Foam rubber.
Upholstery. The fabric must be durable and of high quality so that it can be wiped, cleaned and washed. You can use leather or furniture fabric, which is sold in a specialized store.
Hot glue gun.
Zipper for cover.
Scissors.

Important! If you are planning to create a large ottoman that will serve as a table or chair, then for the convenience of manufacturing the bottles, connect them into separate sectors and sections, fixing them with adhesive tape, and then begin to form the overall structure.

Step-by-step instruction:

Take bottles with tightly closed lids and connect them to each other with adhesive tape. If the future product will have a round shape, then start connecting the bottles from the middle: take one bottle and, moving along the radius, attach new elements to it with tape.
After completing the circle, cut out two circles of the same diameter from cardboard, which should be slightly larger than the bottle design. This will be the top and bottom of the base.
Tape the cardboard tightly to the plastic structure with tape. The frame for the pouffe is ready.
Cut out 3 blanks from foam rubber: 2 circles of the same diameter and 1 rectangle, which will wrap vertically around the frame.
Secure the blanks with a construction stapler or thread.
Sew a cover for an ottoman with your own hands from furniture fabric.

Important! It is better to make a cover with a zipper, so that later it can be easily removed and washed. You can sew several options for covers and update appearance products from time to time.

Cardboard boxes can also be used for the frame. The main thing is that they should not be damaged. Instead of foam rubber, you can use a synthetic winterizer, insulation or several layers of dense fabric.
If you plan to use the ottoman for personal needs, then use a thick fabric to make the cover, and process the seams with a border. For a children's ottoman, use a brighter, more colorful fabric, as well as a denser layer of foam rubber. Add an additional functional element in the form of a strap to the finished product, which will make it easier to carry. The child will be happy to carry such a pouf with him as a toy.

Pouffe from a plastic bucket

An interesting solution to create a furniture masterpiece is to use an unnecessary plastic bucket for the frame of the pouffe. To make a useful and beautiful thing you will need:

Plastic bucket.
Thick jute rope.
stapler.
Hot glue gun.
Scissors.
Cardboard or thin plywood.
Upholstery fabric.
Microfiber (several new cloths).
Velcro tape.
A large button or handle from a furniture cabinet.

Step-by-step instruction:

Wash the bucket, remove the metal handle from it.
Turn the bucket over, tightly wrap the outer surface with a rope.

Important! Plant each stitch on glue so that the rope sits tightly.

Cut the end of the rope, carefully hide.
Put the bottom of the blank on the cardboard, circle it.
Cut out the circle according to the outlined pattern.
Lay out the template on the upholstery fabric, cut out the blank with an allowance of 5-10 cm.
Connect the fabric and cardboard. Make a hole in the center, thread a bolt from the furniture handle through the cardboard and fabric. Screw the knob onto the bolt. If you use a large button, then connect the fabric with the cardboard in the middle with it.
Roll the microfiber into a tube, wrap the bolt radially between the cardboard and the fabric, creating a kind of roll. Fix the microfiber securely with glue so that it does not unwind.
Stretch the upholstery fabric, secure it on the back with a stapler.
close reverse side seat with another piece of fabric, put it on the glue to hide the traces of cardboard.
Cut the Velcro into 4 equal pieces, stick them on the bottom of the bucket and the base crosswise.

Important! The fluffy part of the Velcro should be facing the seat, and the bristles should be facing the bucket.

Connect the cover and base.

Do-it-yourself ottoman is ready and now you can sit on it comfortably!

Pouffe from a stool

A stool well-knitted from durable wood can please the owners for many years to come, if you make a stylish ottoman out of it. To convert an old stool into a modern piece of furniture, you will need:

Plywood.
Foam for the seat.
Glue.
Upholstery fabric.
stapler.
Self-tapping screws.

Pre-strengthen the structure of the old stool with self-tapping screws and proceed as follows:

Shorten the legs of the stool a little. Check the work with a level so that the product does not subsequently stagger.
Attach 4 sheets of plywood to the stool legs with self-tapping screws.
Screw the fifth sheet of plywood on the bottom. This will be the bottom of the future crafts.
Cut out the foam for the seat with an allowance of 5 cm.
Coat the top of the pouffe with glue so that the foam does not get stuck in a lump.
Attach the upholstery fabric along with the foam using a stapler.
Decorate the rest of the structure with a fabric, fix it with staples.
Screw the wheels (optional) or legs.

Important! The foam rubber on the sides can be attached with slats to give the design a round shape and make the ottoman more beautiful.

Wooden ottoman with storage box

For those who like to work with wood and have the skills of a carpenter, we offer to make a fairly simple, but very functional and beautiful pouffe with a drawer. In such a pouf you can put children's toys, magazines or shoes.

To make a practical product you will need:

Laminated board or chipboard sheet. The material is needed to make a circle with a diameter of 30 cm and rectangles with a size of 40x30 cm.
Wooden bars in the amount of 4 pieces and 4x8x8 cm in size.
Glue for wood.
Furniture wheels with special fasteners (4 pieces).
Metal corners (4 pieces).
Self-tapping screws.
Screwdriver, screwdriver.
Foam rubber and upholstery fabric for the cover.

Step-by-step instruction:

Connect the pre-cut chipboards in such a way that you get a box 40x40 wide and 30 cm high. Use metal corners and self-tapping screws to fix the material. The corners of the structure must be straight. Spread additional glue on the joints.
Glue the bars to the bottom of the structure, on which the wheels will be attached in the future.
Install the cover with glue and screws. Choose any base you like.
The frame is ready, start sewing the cover. Cut out foam rubber and furniture fabric according to the shape of the lid. Sew a strip of fabric 10 cm along the contour. You can sew on canvas, frills, drapery as desired and to your taste.
Lay a layer of foam rubber on the lid and pull the cover over the top.

How to sew a pouf?

If you like to sew, then you can make a soft ottoman with your own hands at home, not only from multi-colored fabric, but also from old clothes. Any sweater can turn into a very noticeable and comfortable piece of furniture. The main thing is desire and imagination.

Option number 1. Simple fabric pouffe

If you don’t have time to fiddle with patterns, then use a simple way to make an original piece of furniture:

Cut out 2 circles from the fabric with the corresponding diameters of the bottom and top of the product and allowances for the seams.
Cut out 2 rectangular pieces of the same size. The width of the rectangles should be equal to the height of the pouffe, and the length should be half the circumference of the upper and lower parts of the product.
Sew the rectangular parts along the width on one side to make a long ribbon.
Sweep the resulting tape and circles. Stitch circles along the seam. If the seam is not even enough, close it with a decorative border.
Fill the finished case with any suitable material.

Important! For internal filling of the pouffe, use foam rubber or synthetic winterizer. These materials hold their shape perfectly and do not deform.

Sew the zipper into the open edges of the rectangular ribbon.

Important! Make a hole for the stuffing material at the bottom so that it is not noticeable. Optionally, you can sew it tightly or sew a zipper into the hole to be able to change the material if necessary.

You can make a pouffe in the shape of a cube. Details for the product must be square in shape. On the sides you will need 4 parts, and on the base and bottom - 2. Stitch the parts to each other, and to clearly mark the edges of the cube, use a canvas in a contrasting color.

Important! For the manufacture of the cube, use a denser fabric to give the product strength and elasticity.

Option number 2. Multicolour fabric pouffe

Sewing a bright piece of furniture is not difficult at all. For work you will need:

Fabric in different colors.
Lining fabric.
Large buttons (2 pieces).
Filler.
Needle with threads.
Sewing machine.

The process of making a bright masterpiece is quite simple:

Draw a circle on paper right size(such as the pouf you want to get). Divide it into 12 parts. If you have fewer flowers, you can divide the circle into 6-10 parts.
Attach the finished patterns to the fabric, cut out triangular blanks with a small margin for seams.
Cut out the lining fabric in the same way.
Grab the petals of the circle with threads, and then sew them on a typewriter. You should get two round bases - upper and lower. Sew the bases from the inside out, leaving one piece unsewn.
Unscrew the cover, place the filler inside it.
Sew carefully last part. Close the sewing place with large buttons.

Important! In order not to spend money on buying new fabric, use shreds from old clothes.

If you like to crochet or knit, you can make a soft frameless ottoman with your own hands:

For work, you will need the most thick knitting needles with a diameter of 9 mm and fairly thick wool. You can also use cotton ropes (20-30 pieces).
Tie them into a long rectangle.
Fasten the side of the workpiece with a rope to make a spacious skirt, and pull the bottom with the same rope to make a bag.

Important! To fill the bag, you can use old things or purchase foam rubber (holofiber).

Option number 3. Furniture from an old sweater

To make an original piece of furniture, you will need:

Old sweater.
Scissors.
Needle and thread.
Felt.
Lining fabric for the cover.
Stuffing material.

Step-by-step instruction:

Cut out the bottom of the felt for a round or square ottoman. This element will serve as the primary blank.
Take a sweater, turn the sleeves inside out.
Sew the remaining hole with an even seam.
Stitch a piece of felt to the bottom of the sweater to make a pouch.
Prepare a cover for stuffing from the lining fabric. If the primary felt blank is round, then you will need a piece of fabric in the form of a rectangle, for example, with a length of 70 cm and a width of 50 cm. If you decide to make a square ottoman, then calculate the required dimensions for four parts.
Sew all the details together and leave a hem at the top for the lace, which will tighten the hole after filling the cover with material.
Place the cover inside the sweater.
Fill the case with material. Pull the string as tight as possible.
Straighten your sweater, enjoy your new piece of furniture.

Option number 4. Ottoman-ball

If you do not know how to make a round ottoman with your own hands to decorate a children's room, then this option is for you. To make a children's ottoman with your own hands, prepare the following materials:

Fabric with a high density of two colors.
Paper for making patterns.
Scissors.
Needle and thread.
Sewing machine.
Polyethylene.
Silicone filler in the form of balls.

The process of creating an ottoman ball is as follows:

Make a pattern on paper, observing the required dimensions. You can use any round piece of furniture to create a pattern, such as a table lamp shade or a large ball. Measure its circumference, and divide the result in half. Divide the number into 5 parts so that 3 middle and 2 extreme are the same size. As a result, you will get the diameter of the base in the form of a circle and the width of the stripes that make up the spherical cover of the pouffe.
Transfer the resulting markup to the item of your choice, starting with the part in the form of a circle. Draw the next line below, along the pre-calculated bandwidth.
Cut the plastic bag along one side and cut off the bottom. Lay out the bag on the marks of the first strip, and secure the edges with tape. Transfer a quarter of the strip to the bag and cut it out. Similarly, prepare the part of the middle strip.
Transfer all the details to graph paper, cut out the details of the ottoman from the fabric of two colors, leaving 1 cm for the seams.
Sew the strips, leaving one side unsewn.
Attach one strip to the round piece. The ends of the strip should converge. Stitch them and connect the base with a strip of seams, stepping back 1 cm from the edge.
Sew a similar blank for the opposite side of the cover. Stitch the workpiece to the middle strip. Do not sew up the ends of the middle strip.
Stitch the second semicircular blank with a middle stripe. Iron the seams.
Fill the case with silicone balls, and to make the shape elastic, add small pieces of foam rubber.
Sew up the hole with a hidden seam.

What can you make an ottoman with your own hands?

Above, we told you how to make ottomans with your own hands, a master class for each product option will help you realize your plan. However, it is impossible to fit all the materials for the manufacture of an original piece of furniture into the framework of one article, since there are a huge number of items around that are suitable for creating a masterpiece, such as these.

Tires

A wonderful do-it-yourself ottoman from tires can be put at home, on the veranda personal plot or right in the country, replacing expensive rattan furniture with almost free.

To make practical furniture, it is enough to cut two circles from plywood and attach them to the top and bottom of the tire. Then - fix the bases with self-tapping screws and decorate the entire workpiece with twine. To make the ottoman a little higher, you can screw two legs.

Important! With the help of 2 car tires and a sheet of bendable plywood, you can make a chair with a back.

Plywood and vinyl

Sheets of plywood with dimensions of 45x45 and cuts of 45 degrees are used to make the frame. Vinyl is cut out according to the size of the plywood with a margin of 2-3 cm. Put a soft cloth and not thick foam rubber on top of the vinyl, cover the entire structure with a plywood sheet. Bend the vinyl upholstery and secure with a stapler. To fix the frame, use metal corners and self-tapping screws.

Important! You can decorate the vinyl trim with decorative carnations. Lay the tracing paper pattern on the vinyl and create an interesting pattern with studs. The paper is easily removed, resulting in a beautiful plywood ottoman with an original pattern.

Artificial fur

The fluffy material can be used to make a seat or to create an entire product.

plastic pipes

Making a pouffe plumbing pipes as follows:

First you need to cut the pipes into pieces 30 cm long (about 9 pieces), then paint the pipes acrylic paint in several layers and treated with a protective varnish.
After drying, the pipes must be fastened with an adhesive gun.
Polyurethane bathroom mats can be used for the seat. Fold them in half and make cuts along the perforations (the length of the cuts is 5 cm). Fold the rug to make a bud and insert the rolls into the pipes. The buds should enter tightly, then no additional fastening is required.

Important! When making a pouffe, pay attention to the floor in the room:

Since the laminate is very sensitive to any mechanical stress, it is better to make a pouffe without wheels and legs for such a coating.

We hope that after reading our article, you have chosen for yourself suitable option making an original, functional piece of furniture and decorating the interior of the house with it. Now, in a soft homemade ottoman or chair, you can relax, watch TV, read, or you can place an ottoman in the hallway and it is convenient to take off your shoes on it. And most importantly - in the manufacture of your masterpiece, you used unnecessary things and materials, while spending a minimum of money!

More than a decade ago, ottomans were very popular. Today, these elements of the interior are back in fashion. On the market, this multifunctional product is presented in a large assortment. But, if desired, the ottoman can be made with your own hands. To do this, you just need to select the type of construction and prepare necessary materials and tools. So, how to make an ottoman with your own hands? What will be needed for this?

Puffs made of chipboard are very popular. Such designs can withstand heavy loads and can be used as a full-fledged stool. They may also have different design features. This may be a hinged lid design or other options. In any case, to build a simple ottoman from chipboard, you will need:

Chipboard sheet. Its size should be 240x175x1.6 cm. You can also use plywood. Its thickness should not be less than 1.3 cm. This will be enough for adults to use the ottoman.
A beam with a section of 4x4 cm and a length of 150 cm.
If desired, the product can be made on wheels. In this case, you need 4 rollers.
If the ottoman is made with a hinged lid, then 2 more loops will be needed.
Foam rubber or synthetic winterizer is used as a filler.
Tapestry or other dense fabric is suitable for upholstery.

As for the tools, to make an ottoman with your own hands you will need:

a hacksaw with fine teeth or a jigsaw, which will allow you to cut chipboard or plywood with high quality;
hammer;
self-tapping screws;
screwdriver or screwdriver;
construction stapler or furniture studs with wide hats;
wood glue.

To simplify and speed up the process, you can use a box with legs. It is made from bars, which are interconnected by self-tapping screws. But what could be better than a handmade square ottoman on wheels with a hinged lid. Thus, the design will be used not only for sitting, but also for storing various small things or toys. A step-by-step master class will show how easy it is to organize the production of such furniture at home.

Manufacturing

So, do-it-yourself ottoman in your house is done step by step, with the exact observance of each item. So, we make a pouffe:

First of all, markup is applied to the chipboard sheet. For the construction of the frame, you will need 5 identical squares, 40x40 cm in size. The result will be 4 walls and the bottom of the box. Here it is worth remembering that a rather thick material is used for the manufacture of the structure, which will ensure its resistance to various loads.

As for the lid, it can be round, square or oval. A simplified version involves the manufacture of a square cover. In size, it will be slightly larger than the box. So, a workpiece measuring 43x43 cm will be enough. As a result of all the work, a pouffe will be obtained, the height of which will be 53 cm. All dimensions are taken into account here, starting with the height of the box and ending with the thickness of the skin.

When the markup is applied, you can safely proceed to cutting the material. Do not worry if this process results in somewhat uneven workpieces. All defects as a result will be hidden under the skin. It is also worth cutting the bar into 4 equal parts. As a result, the length of one segment will be 40 cm.
Next, you need to make a box, for which ready-made blanks are used. A wooden cube is formed from plywood, in the corners of which bars are installed. Initially, they are fixed with glue. When it dries, the plywood is screwed to the bars with self-tapping screws. This will give the structure rigidity and reliability. The hats go deep into the plywood, which in the future will prevent damage to the upholstery. Also, metal corners are widely used to strengthen the structure. The bottom of the box is attached using the same technology.
At the next stage, a cover for the pouffe is made. On the inside of the workpiece, four bars are attached around the perimeter. This will prevent the cover from moving while sitting. Before fixing the bars, you need to make sure that the lid closes easily.

At the final stage, the wheels are attached to the structure. For greater reliability, they should be fixed in the corners of the box, directly into the bars.

Thus, a do-it-yourself pouffe according to the given master class can be considered ready. It remains only to test it for strength and carry out the skin. At this stage, it will still be possible to eliminate the shortcomings.

Upholstery

First of all, you need to cut a piece of foam rubber. It must match the dimensions of the lid. It is fixed to it with wood glue. The next step is to cut out the fabric for the upholstery of the seat. In size, it is made somewhat larger so that it is possible to completely cover the seat and wrap the material for fastening a little. Fix the fabric with furniture nails or a construction stapler.

When the cover is ready, you can start upholstery on the sides of the pouffe. To do this, you need to take the fabric and cut out a piece from it, the length of which will be the size of the box. Since the sides are 40 cm high, the length of the workpiece should be 160 cm. In this case, you need to make a margin of several centimeters, which will allow you to bend the material for fastening. After that, you can fix the upholstery fabric on the product.

A few ideas for creating ottomans

At home, a pouffe can be made with your own hands from improvised materials. So, many are wondering how to make a round ottoman with their own hands. It is very easy to make such furniture. As a base, plastic bottles are used, which are interconnected with ordinary adhesive tape.

Round blanks are attached above and below. The material used is thick cardboard or plywood. Fastening is carried out using glue or self-tapping screws. At the final stage, it remains only to wrap the structure with foam rubber and sheathe it with a cloth. In this case, you need to form the appropriate shape of the pouffe. Also for the manufacture of such furniture, you can use 20-liter plastic bottles.

A good option would be a pouffe bench with a back. It can consist of several puffs or a one-piece design. Often, ready-made stools are used to make such furniture, which will somewhat simplify the process. If desired, a pouffe bench can be made of wood yourself. It can be equipped with a folding side, which will open access to inner space. It can be used to store shoes and other small items.

In fact, there are quite a few options for making such furniture in the hallway. As a material for the frame, improvised materials are used, such as a cardboard barrel, pipe sections, and even plastic boxes. If desired, you can make an ottoman without a frame. As a filler, foam rubber scraps and fabrics, foam rubber granules and other fillers are used.