Chair children's adjustable drawings. Homemade children's chair "grow up"

Growing chairs are a type of children's orthopedic furniture, in which the height is adjustable, the position of the back and legs changes. At correct setting it is almost impossible to sit on such a chair incorrectly or keep your back crooked. The chairs are made of wood or plastic. Orthopedic doctors advise choosing popular models that are certified and safe, both in terms of material and structure.

The Stokke brand is made in Norway. In addition to chairs under this brand, they produce the entire range of furniture for children, as well as. As for growing chairs, consumers, in addition to high quality, will be interested in their bright appearance.

There are models for boys, for girls, for every taste, only 15 color solutions. The main material is natural beech, varnished. Since the Norwegian company has been producing its furniture for a long time, from natural materials and guarantees the quality, the cost of the chair is correspondingly high.

Kid Fix

Kid-Fix is a domestic manufacturer. He specializes in chairs that are suitable for six-month-old babies and can perform their functions right up to the first grade of school. The frame is designed in such a way that it can easily withstand a weight of more than 100 kg.

There are fewer color options than Norwegian competitors, only 8. Production material - birch. The material is also natural and safe, the company has sufficient experience, product quality is excellent.

The Little Humpbacked Horse

Chairs The Little Humpbacked Horse Russian production made of natural wood (walnut, birch and other species), and the coating is made of German varnish. The material is safe for children, fastenings are reliable, and transformation mechanisms are diverse. The manufacturer gives its products a 10-year warranty.

The buyer will be surprised by the colors. There are monochromatic models, as well as two-color ones, for example, white-pink, white-blue, or white-orange.

On the official website of the company www.kon-gor.com you can evaluate the full range of products.

In addition to high chairs, this company produces transforming beds, desks for growing children and a huge number of accessories. All furniture has a variety of adjustments, which allows you to use it for more than one year.

Kotokota

Kotokota chairs are produced in 6 colors. The furniture is ergonomic, changes and transforms according to age. The main production material is birch. Coating - German varnish of excellent quality. Chairs are safe for health and can be used from an early age.

Accessories

Each manufacturer produces a large number of accessories for their furniture:

Stokke - baby seat with the ability to lie down, seat cushion, plastic tray and seat belts;
Kid-Fix - highchair cushion and seat belts, as well as a table;
The Little Humpbacked Horse - a large number of accessories, including a pocket for toys, a table with limiters;
Kotokota - from additions only limiters and a table.

Some are sold as a set with growing chairs, others are purchased separately. The cost varies depending on the brand, material of manufacture. All accessories are also certified and meet safety requirements.

Price

High-quality orthopedic furniture cannot be cheap, since natural wood is expensive in itself:

Stokke - 12,000 rubles for the chair itself, the cost of accessories is from 2500 to 6000;
Kid-Fix - the price of a high chair is from 5500 rubles. Pillow for him - 750 rubles. Table with safety straps - 490;
"Humpbacked Horse" - 6000 the price of a chair. A pocket costs 1,000. A table with a limiter - 1,500 rubles. A knee chair can be purchased for 5990 rubles, and a growing table-desk for 6090 rubles;
Kotokota - 6200 and accessories - a table with a limiter 1800 rubles.

Despite the high cost, many parents purchase growing chairs, taking care of the child's posture.

How to choose

When choosing a growing chair, take your baby with you to the store. So you can try on the chair and make sure that the little one fits comfortably. Be sure to ask the seller to show a certificate of safety and quality, check the environmental friendliness of the materials from which the furniture is made.

Ideally, the highchair should please the baby and fit the interior of the children's room. If suitable color it didn’t turn out, it’s better to take the classics in black or white.

A good quality orthopedic chair should not have a slippery base and have a transformation mechanism so that with the age of the child until graduation, the furniture can be adjusted to the growing body. Also, parents should check the strength of the mechanisms and their quality so as not to be disappointed in the future.

How to DIY

You can make a growing humpbacked horse chair with your own hands. First of all, you need drawings. If the design is incorrectly calculated, then orthopedic furniture will not work. Plywood is suitable for a home folding chair, since natural wood requires the use of highly specialized tools.

After carefully studying the instructions and all the schemes, the master will need:

Plywood for racks - 22 mm;
Plywood for the seat, footrests can be thinner - 16 mm;
Hexagon bolts are only 4. 2 are 0.6x7 cm in size and 2 are 0.6x5 cm in size;
Countersunk nuts measuring 1x2 cm and 1x1.2 cm;
You will also need materials for decoration - stain, varnish, primer, paint;
If you wish, you can upholster the chair with leatherette or oilcloth.

In addition to the main ones, you will need related materials: a pencil, drawing paper, a jigsaw, wood glue, milling machine and cutters to it, sandpaper and brushes.

Assembly steps:

A pattern is created, the legs of the chair are cut out of plywood;
In total, we cut out 2 pairs of legs with a margin;
With the help of a cutter, we bring all the legs to the optimal size;
WITH inside the legs are cut with a cutter: depth - 1 cm, and width - 2.4 cm;
In the middle of the recess, holes are made for the seat and footrest;
Then a slider is made, which is responsible for securing the footrest in the desired position;
A groove is constructed in the center of the slider, into which a rail is glued;
The slider and rail need to be glued and dried;
In the slider, you need to make 2 bolts, they are responsible for the selected position;
The back and footrest are designed, they can be of any shape, both oval and square;
Be sure to make a transverse crossbar that fixes the legs from below;
As a result, we clean everything with sandpaper, then apply paint and varnish;
We collect the rest of the parts after drying.

The master must necessarily supply his work with armrests, since the child will not fall like that. Parts must be removable in order to get rid of them at the right time. It will not be difficult for an experienced furniture maker to make such a chair with his own hands, and the result of the work will delight for a long time.

A growing chair will serve the little one for a long time, keeping a straight back and creating a comfortable environment for children to study. Orthopedists consider such furniture the only the right choice. A real, high-quality chair is expensive, but if available necessary materials and the correct drawing, you can do it yourself. The main thing is to use safe material, and when painting, avoid toxic compounds and use a special varnish.

The difficulties in caring for children are largely due to the fact that buying everything you need can be quite a task for the family budget. Another question is whether parents manage to find exactly what they would like in stores, or in fact there is nothing ideally suitable among the assortment. Both reasons that prevent the purchase of a particular product, one way or another, suggest that it would be nice to make it yourself. For instance, high chair- if dad has enough experience with various tools, he may well make it with his own hands.

Peculiarities

Contrary to seeming simplicity, a do-it-yourself highchair is not so simple task to perform it without any preparation. Do not start work until you have a clear understanding of how the end result should look like, and what operations will have to be performed to achieve this.

Also, don't ignore the calculations. Any chair should be strong enough to withstand its “passenger”, and the child, although not heavy, will not sit neatly on it, especially since the dimensions of such furniture are also small.

Strength requirements are relevant not only for basic materials, but also for fasteners, be it self-tapping screws, glue or grooves. In addition, the baby is constantly growing, and it makes sense to make a high chair with a margin of at least a couple of years in advance. For all its strength, the product should be comfortable, that is, approximately correspond to the dimensions of the owner.

Also try to ensure the proper lightness of the furniture being made - it should be convenient for the owner to independently move his chair to where he wants to sit at the moment.

Don't forget to stay safe. Furniture, in any case, cannot be traumatic, and children's furniture even more so. No sharp edges are allowed, and if wood is the main material, as happens in most cases, then it must be carefully sanded to avoid peeling splinters. When covering the finished product with varnish or paint, give preference to natural - children tend to put everything in their mouths, and can be poisoned by a toxic coating.

Finally, remember that this chair is for a child. Apart from suitable sizes, it is desirable for a piece of furniture to be also beautiful. If complex decor is not for you, try to at least paint it in bright colors.

Drawings, dimensions, diagrams

Before proceeding directly to the manufacture of parts, it is necessary to draw up a drawing with dimensions - this is the only way all the components will ideally fit one to the other. You can use either one of those ready-made options that are already posted on the World Wide Web, or draw up a diagram yourself. It is important to note here that there are blueprints and instructions on the Internet explaining how to make a standard look table and chair, so they are usually not suitable for those who want to create something original - for example, an elephant chair.

Drawing a table and chairs, which can be made in the form of a kit, it is not necessary to strictly follow the principles of drawing: there are not so many details in them that they cannot be kept in the head. For us, the main thing is to make sure that all dimensions converge, and the parts fit perfectly with each other, but the ways of connecting individual parts must be present on the drawing. In general, it can be presented schematically, without a high accuracy of the drawing.

Think over the dimensions (or choose ready-made drawings based on them), based on the convenience of the child. Those chairs are considered comfortable, the seat of which is at the level of the knee or slightly lower. In the case of a highchair, it is recommended to make the seat a little higher, because the child will probably still grow. At the same time, do not overdo it: if it is difficult for the baby to climb onto the seat, then the product can be considered unsuccessful.

Determining the size of the seat itself, keep in mind that the owner should fit freely on it, but do not make it too big - this will make the chair heavier and difficult to carry. The normal height of the back is about two thirds or three quarters of the wearer's back, making it higher than the neck is already impractical. When determining the thickness of future parts, rely only on the strength of the selected material and the weight of the child.

materials

In terms of ease of processing and environmental friendliness among the materials for the manufacture of children's furniture, wood and its derivatives undoubtedly hold the palm. Therefore, most often you can find a wooden chair. However, you can not choose any tree - here, too, it is worth considering before proceeding with the manufacture. The most popular among all types of wood is beech. They have a strength reminiscent of oak, but are easier to work with and less expensive. In general, it is hardwoods that are considered a priority. From inexpensive options birch is often chosen, linden can also be considered.

From softwood, spruce and pine are suitable for making furniture, but the resin contained in any such wood is dangerous - it can stain clothes, and it can also pose a health hazard. Regardless of the specific species, choose a homogeneous tree, without knots and cracks, with an even texture.

The material of the seat may be similar to the material of the body, or it may be fundamentally different. In order to save money and achieve greater flexibility, the seat is also made from plywood, and even from chipboard. When choosing them, give preference only to the most durable types, but remember that in any case they are inferior in terms of durability to solid natural wood.

For increased softness, the seat can be additionally equipped with a small foam cushion, sheathed with a fabric that is pleasant to the touch.

There is also such an option for sitting as made from plastic bottles - both whole and chopped. Harmful plastic, present in the form of garbage in any apartment and polluting the environment, could get a second life, especially since its strength and durability are very high. This option is still much less common due to the difficulty of securely attaching individual parts, as well as not too attractive appearance. finished product.

Colors and decor

For all its practicality and convenience, the baby will definitely not like the chair if it cannot be described with the word “beautiful”. No one makes any special chairs for teenagers, and for young children, brightness and attractiveness are very important. Therefore, do not limit yourself to only one colorless varnish or discreet monochromatic solutions. A solid color is generally acceptable only if a light or very bright shade is chosen - often it is red or yellow, the so-called "warm" tones.

If drawing is not alien to you, please your child with interesting design solutions. You can go the "adult" way, painting the frame in one color, and the seat and back in another, or you can focus on the children's desire for a bright and defiant one. The simplest option is the “rings” on the legs of the chair, any patterns and even just blots are also acceptable - provided that it looks cute and positive. Regardless of how much and what kind of paint you use, do not forget - it should not be toxic.

If you have a creative streak and a desire to complicate the task a little for the common good of the cause, you can perform a more complex decor. As an option, decorate the legs or the back of the chair with carvings, but adults would like this solution more. But for a child, an ornament in the form of one or another animal will be a chic solution. Classic variant- when the back is cut out so as to resemble an elephant, or any other animal that is cute for a child, and then painted to look more like a "cartoon" character.

Covers can also become a kind of decor. In addition to their typical functions, such as simplifying the cleaning of furniture and increasing the comfort of its use, they can also decorate the back of the chair. Ideally, they should depict the child's favorite hero, characters from popular fairy tales, or the same animals. Mom can help with making a cover for dad, especially if she knows how to embroider or has skills in appliqué fabric. If the mother does not have such talents, you can simply change the cover from the clothes on which the necessary pictures were applied by the factory method.

For the youngest children

The youngest children so far sit on the highchair for only one thing - eating. It is important and necessary to teach a child to eat while sitting, and indeed to sit, in particular, at the table. However, the features of its development at this stage do not allow the use of ordinary chairs for this. The problem lies in the fact that a simple chair does not have a back with handles, and a tiny child himself will not be able to sit on it evenly, and will simply fall.

As for highchairs, their dimensions usually do not allow you to choose a normal table for them. In this situation, a special highchair for feeding will be an excellent way out.

Such furniture should be comfortable for both the child and his mother - so far the child cannot eat on his own, so the mother will have to spoon-feed him. For the convenience of this operation, the chair is made at a normal height, or even a little higher - so that the mother does not bend over. The actual period of use of such a chair is about a year, so if you have one child and the family does not plan a second one at all, you can choose not the most durable materials for manufacturing.

In terms of manufacturing, the highchair is perhaps the most complex - it has the largest number of parts. The relatively small seat is raised high above the floor, which makes it necessary to resort to installing additional stiffeners between the legs - for improved structural stability.

Given the specifics of the child of the appropriate age, both the backrest and the railing are simply necessary - they must completely exclude the possibility of the baby falling. Moreover, the barrier should also be in front, although it has another useful function - it plays the role of a countertop on which food will be placed. The space under the tabletop is left free - the baby will stick his legs in there.

Cutting and assembling such a chair is quite simple. First, according to the drawing, two identical side halves are cut out, which are then interconnected by the seat, backrest and stiffeners using grooves, glue or self-tapping screws. Before assembly, all individual parts should be sanded to a perfectly smooth state, the finished product is varnished or painted - ready.

Models for an older child

The peculiarity of highchairs for children who have finally come out of infancy lies in a significant variety of design options, limited only by the creator's imagination. The back is still considered a mandatory attribute, but the railing is no longer there, as are the front barriers. Saving on materials in this situation is not worth it - if the furniture is made with a margin of size, then the child will be able to use his high chair for many years.

The manufacturing process consists of a few simple steps:

Think over the design to the smallest detail and draw up a drawing. Decide on the number of body parts - whether it will simply consist of two solid halves or from separate legs and separate supports for the seat, whether the backrest base will be a continuation of the rear legs or it is attached separately, and so on. Calculate everything, including the thickness of the seat and legs, provide stiffeners and additional supports for the seat in advance. Provide grooves, designate places for screws.
If doubts about the correctness of the selected parameters still remain, try to assemble a temporary cardboard chair according to the drawing. Unfortunately, it does not have the same strength to test the product from all sides, and it differs in thickness from wood or plywood, which must also be taken into account when specifying dimensions, but you will get a visual idea of the future product.

Start cutting out individual parts from wood or plywood. It is advised to start with the body. Well, if there are a lot of identical parts in the set, then the subsequent ones can be cut out by simply tracing the already finished first one. If your design allows, don't put off assembly until after you've cut everything out - start as soon as you have at least two pieces that need to be connected. This will help you immediately notice any design flaws, if any. After the parts are ready, sand them to a smooth state.
When all the elements are ready, proceed to the final assembly. Do not limit yourself to one type of fastener, in particular, glue the grooves - this will significantly strengthen the product and increase its durability. Ensure that the grooves go as deep as possible - tap on the joints with a hammer to make the fastening more reliable.
The last step is varnishing and staining.

No matter how detailed and intelligible a theoretical explanation is, it is unlikely to be compared in terms of information content with a good example, because it is better to see once than hear a hundred times.

H and the video is one of the best examples of how to make a highchair with your own hands. The master tells literally everything, including the dimensions of the parts he used, so you can even do without a drawing, just repeating what he says. The resulting chair is quite simple in design, but easy to make. You can find many other similar videos on the network, but the models there are always approximately the same, but here the process is shown in great detail and clearly.

Watch a master class on making a highchair with your own hands:

The principle of making a baby highchair, in general, is similar, but it is worth studying in more detail both because of the increased complexity of the design, and simply because another master is already talking, who can reveal some new points.

How to make a baby highchair, see the video:

Children's health depends on many different things. For the younger generation, it is important to have not only proper nutrition, play sports and develop thinking. An important factor is the correct posture when sitting at the table. Correct posture forms the skeleton of the child and gives a balanced development to the whole body.

Decorating elements are chosen at the discretion of the master.

For very young children, it is better to upholster with leatherette or oilcloth in order to be able to clean the surfaces.

V independent work it is also necessary to focus on this figure.

A growing chair copes with several tasks at the same time.

Is orthopedic furniture.
Allows you to use it from 6 months.
Saves family budget.

To decorate the finished product, you will need - putty, primer, varnish or stain, paint of the desired color.

A properly made chair allows you to adjust the base, seat and backrest in various combinations.

Preparation for work begins precisely with the creation of a drawing of a chair.

Experienced craftsmen who have some experience in assembling furniture with their own hands will not be difficult to complete this model on their own. For those for whom the growing chair will be the first independent product, we advise you to carefully read the instructions. It is also necessary to first assess not only your capabilities, but also the availability of tools that you cannot do without in the process of work.

For the younger generation, it is important to have not only proper nutrition, exercise and develop thinking.

Regardless of the source of the drawing, the pattern should be made only in full size.

For the manufacture of a folding chair that grows with the child, not all materials are suitable. The product can be made either from plywood or processed wood. It is also possible to make a chair from an array, but it will be very bulky and heavy, which is inconvenient for the child directly. Therefore, plywood is still considered the best material.

For racks, you will need plywood of at least 22 millimeters, on the basis that two blanks will go to each rack, which will subsequently be glued together. Seats, footrest and backrest can be made of 22mm or 16mm plywood.

The humpbacked horse chair has only one significant defect - the high cost when buying a finished product.

A preliminary pattern of all elements is made on paper or thick cardboard.

It is important to consider that some elements of the chair for the child should be right and left, that is, "mirror" each other.

2 pcs. dimensions 6x70 mm,

2 pcs. size 6x50 mm.

To decorate the finished product, you will need - putty, primer, varnish or stain, paint of the desired color. Decorating elements are chosen at the discretion of the master. You can make the seat soft by upholstering it with foam rubber and decorating it with upholstery on top. For very young children, it is better to upholster with leatherette or oilcloth in order to be able to clean the surfaces.

To make a growing chair for children, you will need the following tools.

Paper or cardboard for drawings.
Pencil.
centimeter or tape measure.
Glue for wood.
Electric jigsaw with files.
Copy cutter.
Frazier.
Sandpaper.
Paint brushes.

It is also necessary to first assess not only your capabilities, but also the availability of tools that you cannot do without in the process of work.

Having prepared the pattern, materials and tools, you can safely get to work.

Remember - work does not tolerate haste and fuss.

A properly made chair allows you to adjust the base, seat and backrest in various combinations. Furniture manufacturers put at least 10-15 positions in a growing chair. In independent work, you must also focus on this figure.

For the manufacture of a folding chair that grows with the child, not all materials are suitable.

An experienced craftsman knows that it is necessary to measure several times, weigh everything and only then cut it off.

The dimensions of the seat for the child are selected independently and depend on his age and the calculated stock.

Preparation for work begins precisely with the creation of a drawing of a chair. You can make a product for a child with your own hands, only by correctly calculating not only the dimensions, but also the angles of inclination of the parts.

On the Internet, you can easily download a finished project or, focusing on GOST 19301.2-94, which describes what parameters tables and chairs for children should have, you can make a pattern yourself.

Regardless of the source of the drawing, the pattern should be made only in full size. A preliminary pattern of all elements is made on paper or thick cardboard. It is important to consider that some elements of the chair for the child should be right and left, that is, "mirror" each other.

It is also possible to make a chair from an array, but it will be very bulky and heavy, which is inconvenient for the child directly.

The shape of the parts can also be arbitrary - square, semicircular or oval.

The growing chair for small children can be additionally equipped with armrests and a safety front bar so that the child cannot fall off it.

Having prepared the pattern, materials and tools, you can safely get to work. Remember - work does not tolerate haste and fuss. An experienced craftsman knows that it is necessary to measure several times, weigh everything and only then cut it off.

We apply the pattern made according to the drawing to the plywood and cut out the first part of the side legs. It is necessary to make a workpiece with a small margin of a few millimeters. This margin will prevent mistakes when cutting.
Using a copy cutter, we bring the workpiece to the ideal size.
Cut out three more legs with a margin.
Fold all four legs in a pile.
According to the first ideal detail, we grind the remaining three legs. This approach will save time on turning.
Glue two blanks together and let them dry.
Using a milling cutter, we make grooves on the inside of the legs. The dimensions of the groove should be 10 mm deep and 24 mm wide. This groove plays a key role in the further adjustment of the positions of all elements.
Exactly in the middle of the groove must be done through holes in which the seat and footrest will be fixed. Holes must be made at equal distances from each other. It is important to place a block under the leg when drilling to avoid chips and deformations on the outside.
Ready for runners. The slider allows you to fix the seat or footrest in the desired position. They will need 4 pieces - two on each side. Runners must fit the size of the foot and not look beyond it - height 20 mm and width 24 mm.
All corners and edges are rounded in the slider, and a gutter is made in the center. The gutter is designed for further gluing a rail into it, which will be inserted into the groove of the leg.
The rail must be made based on the width of the gutter into which it will be inserted on one side and the groove on the other side.
The slider and rail are glued and dried.
A hole is made in the slider for a bolt that will secure the selected position.
Next, cut out the back and footrest. The dimensions of the seat for the child are selected independently and depend on his age and the calculated stock. The shape of the parts can also be arbitrary - square, semicircular or oval.
The next step is to make the back of the chair. The back can have a wide solid surface or be made of several slats of various sizes.
Do not forget about the transverse crossbar that fixes the legs in their lower part.
Finished parts are not assembled by the final method, but rather by the bait method. This will help evaluate the final result and identify flaws that need to be addressed.
If the chair for the child corresponds to the initial plan and drawing, it is necessary to disassemble it and do the final processing with sandpaper. We clean the surfaces, preparing them for painting.
The color of the paint is chosen independently. Some craftsmen prefer to prime and then varnish, thereby emphasizing the existing wood pattern. Plywood, however, is better to paint because it does not have a uniform appearance.
The dried parts are assembled into a structure and are ready for use.

Seats, footrest and backrest can be made of 22mm or 16mm plywood.

These parts can be mounted with bolts, and subsequently removed from the chair.

For classes at the school table, armrests are not needed, since the hands are always on the table.

The growing chair for small children can be additionally equipped with armrests and a safety front bar so that the child cannot fall off it. These parts can be mounted with bolts, and subsequently removed from the chair. For classes at the school table, armrests are not needed, since the hands are always on the table.

Fastening parts of a chair for a child are made using hex bolts and furniture countersunk nuts.

Plywood, however, is better to paint because it does not have a uniform appearance.

50 photo ideas on how to make a growing chair Gorbunek horse with your own hands

Most of the things that the manufacturer offers us can, if desired, be done by hand, and with the experience gained over the years, you can invent something better than the factory one. This homemade product was made by the author, as it took place, because it was intended for a child, and its creation was the first experience, which is also interesting in such endeavors.

In this article we will talk about the “grow-up” chair, the creation of which I will now tell.

In order to make a homemade chair, you will need:
* Fiberboard sheet
* Ruler, pencil
* Electric jigsaw
* Screws
* Screwdriver or screwdriver
* 15 mm thick plywood sheet
* Random color paint
* Hand router with 16mm cutter

Step one.
For an exact product, it is better to make a template, and then make details on it. We apply the template drawing to the fiberboard sheet with a pencil and a ruler, outwardly it should turn out approximately the same as in the photo.

Step two.
We cut out the fiberboard template using a jigsaw. When working with power tools, be careful and remember to wear safety goggles and gloves.

Step three.
According to the template, we cut out two side parts with the same jigsaw from a sheet of plywood.

The details should be identical to each other. On each of them, on the inside, we make several grooves. manual router with cutter 16 mm, in order to adjust the height of the seat. After that, according to the previously presented drawing, we cut out the remaining components of the chair, this is the back, two rectangles as a seat and footrest, as well as two cross beams for structural strength.

Step four.
Each of the details must be painted in the color you like, but if the child himself chooses the color of his chair, then it will be even better. After the paint dries, you can move on to the finish line, namely the assembly of all the parts into one. Armed with a screwdriver and a small number of screws, we assemble a chair from finished parts, to prevent the seat and legs from turning, it is necessary to tighten them with two screws.

On this, the home-made “grow-up” chair is ready, now you can try it in action, and as the child grows up, the screws can be unscrewed and the seat can be moved to the desired, and most importantly, convenient level.

Thank you all for your attention and more useful ideas for homemade products.

When the child becomes taller, it is enough just to rearrange the seat with the footrest to the required height, adjusting their position according to their height. A reliable and convenient fastening system will ensure the safe operation of the chair.

Tip: the only downside of the grow chair is its rather high price, but if you take into account its service life together with functionality, it turns out that this is more of a profitable investment than rash spending.

A chair that grows with the child has an impressive list of advantages:

Versatility - products are suitable for children 6-18 years old. Some models are also designed for a younger age group (from 2.5 years old), and due to the installation of special limiters, the chair can be used for very small ones (from 6 months). There is no upper age bar, so the growing chair is suitable even for adults.
Multifunctionality - the chair can be used both for and for, as well as for creative activities.
Provides correct posture and reduces the load on the spine due to the possibility of adjusting the position of the seat and back.
The child does not get tired while sitting at the table, as the correct position of the body is ensured. As a result, the child's interest in reading, drawing, lessons, etc. is significantly increased.

On such a chair, the child feels independent, because he can easily and without outside help sit on it and go down.

The service life of a growing chair is almost unlimited, so when the baby grows up, this item can safely migrate from the kitchen or even behind the bar.
The chair is very stable due to the large area of support, and the design itself is designed for a load of up to 100 kg, so it is very difficult to break it.
Safety during operation. Most models of growing chairs have a special Teflon coating on the legs, which helps the base to glide gently on the floor, while the child will not tip over or fall.

Chairs are made from safe, certified materials. The most common option is natural wood coated with a water-based varnish that does not emit harmful substances and does not cause allergic reactions. Also chairs or their individual elements can be made of high quality plastic, metal.

Advice: stylish design The growing chairs make it easy for them to fit into anyone. Among the proposed assortment, you can choose an option for almost any color or design.

Among other things, a growing chair for a child can be made even more comfortable by equipping it with restrictive straps, pockets for toys or small items, and a tabletop for feeding. These accessories are offered by the same manufacturers, so it is easy to find the right ones.

Both ordinary citizens who have already tried this item, and orthopedic doctors strongly recommend buying a growing chair for a child, the reviews speak for themselves. But it is important to choose the right model of such a chair so that it meets the expectations as much as possible and fully meets the needs of the baby.

First of all, you should pay attention to the material from which the chair is made:

, as a rule, they have two seats at once - the upper and lower, which is used as a footrest. Both levels are easy to move in height in a fairly wide range, which makes it possible for children from 1.5 to 16 years and older to use the chair.

Plastic looks spectacular, weighs less, but will not last so long. The most durable options with a wooden frame and plastic seats.

The next thing to pay attention to is the age of the child. Some models, in particular those made of wood, can even be used by adults, while less durable plastic ones are more suitable for kids of a younger age group. The same applies to design: for kids, bright chairs with plastic inserts are better suited, and as universal options “for growth”, it is better to choose a model made of wood in a neutral color.

Tip: to make it even more comfortable for a child to sit on a chair, you can supplement it with a soft one on the back or seat, which will also add individuality to the appearance.

Not the last role is played by the ease of use and transformation of the chair. In particular, some models allow you to change the position of the seat using a system of grooves on the frame, while others use a stronger bolt-on mount.

The stronger the fastener, the longer the product itself will last, and its operation will be safer.

Among trusted manufacturers that offer only high-quality and reliable products, you should pay attention to the growing chair for the child Kidfix, Kotokota, Millwood and the Little Humpbacked Horse.

All of them are similar in design, have a base and stands made of wood, and are also equipped with special limiters:

Kid-Fix is a growing chair made of simple construction and versatile design. The position of the two seats is adjustable in a wide range, and the impressive width of the product allows it to be used even by adults. The wide base will appeal to active children who can’t get into a comfortable position. Additional advantages of the chairs of this manufacturer will be the ability to install restraints for babies, as well as soft covers for greater convenience.

Kotokota is a simple design made from wooden frame with the ability to adjust the height of the backrest and two seats. Most models are equipped with a limiter, which is used as a table for feeding, so the chair is suitable even for babies from six months. Seat fastening at the right level is carried out by means of slots-runners in the side parts. Chairs are made from high quality wood, which can be painted in any color.

Millwood - differs from its predecessors only in the materials used in the production. In particular, the frame is made of solid wood, but the seats and restraints are made of high-quality plywood (chipboard). The seats are fixed by inserting them into the side slots and fastening with a special key, resulting in a stable, durable structure that is equally well suited for preschoolers and teenagers. The transformation mechanism is very simple and convenient, you can change the position of the elements in a few minutes.

The Little Humpbacked Horse - inexpensive models of chairs have simple design, consisting of a solid base with a backrest and two mobile seats. They are extremely easy to transform, have universal design, quite stable, suitable for children from 1.5 years. Products differ from foreign analogs in low price. Reliable fastening is provided by lateral openings.

According to orthopedic doctors, a chair that grows with the child is extremely effective because it helps prevent spinal problems such as scoliosis, curvature, etc.

All children develop differently, so standard furniture cannot take into account all the features of the body. The ability to adjust the height and position of the chair allows you to choose the optimal landing position that is suitable for a particular child, taking into account his individual characteristics. This is especially important to consider if the child sits at his desk for a long time and often, doing his homework, studying at the computer, drawing or reading.

From the point of view of psychologists, a growing chair is also necessary, because if the baby feels comfortable at his workplace, does not fidget, does not experience discomfort, then his emotional development will be harmonious. Psychological comfort should be provided from a very early age, so every parent is obliged to buy an adjustable high chair. The kid will be more willing to engage in creativity or other activities at his table, he will feel like a part of the process.

Tip: a children's chair can always be placed next to the common table, thereby involving the child in any family process. Being on the same level with adults, the baby will not feel defenseless, he will be happy to communicate with his parents, being less capricious and becoming independent faster.

Even chiropractors don't stand by, insisting on. After all, many parents are still trying to force a baby to sit on an “adult” chair, thereby depriving the child of the usual comfort. As a result, blood circulation is disturbed, since the baby simply does not have support under his feet. Shoulders and elbows will also be out of place, causing a curvature of the spine. A child sitting on an uncomfortable chair will constantly be naughty, twitch, try to get up, and such anxiety can grow into serious problems with the nervous system (sleep, vision, memory will worsen, irritability, fatigue will increase, attention will decrease).

Receiving an order 3-5 days (depending on the availability of colors in stock and logistics). While WITHOUT COLLECTING the minimum wage, your order is immediately forwarded to the supplier! The KI*D-FIX chair grows with your child and is suitable for children from 6 months to 16 years of age. Budget analogue of Tri*pp Tr*app. Perfect option for schoolchildren - my daughter makes me happy with her straight back! (the photo shows a natural color and mahogany with a red tint) » The supplier's website is uninformative in my opinion, I will try to collect all the information here. Discount 20% and.

For every stage of development, the Stokke Steps highchair

Stokke® Steps™ is a modern Scandinavian-style modular children's chair that changes step by step with the needs of a growing child. This year, the design possibilities of the chair have expanded, you can choose the color of the wood of the chair according to your own taste, to the color of the interior. For infants, use the Stokke® Steps™ Bouncer The Stokke® Steps™ Bouncer pairs perfectly with the Stokke® Steps™ Bouncer to provide a soft, cozy seat for infants. The sun lounger has.

Chair for a child, school age. What do you recommend, by August we want to buy a good chair, we will be in the first class in the fall. The table has already been purchased, but we want to buy a good and comfortable chair. I heard about growing chairs. what do you say, and what brand are they?

Take a Moll chair, you definitely won't go wrong. We have a table and a chair from this company, we are very pleased with the quality and functionality. The chair model Maximo, it is also called growing, it is adjustable in height and seat depth, the back height is also adjusted. The mechanisms are of high quality and safe, it is difficult to break them for sure. The covers are removable and can be washed or changed later. Another feature is the dynamic seat, for good posture. I advise!

Who has what chairs for children? uu88uu's blog on 7ya.ru

Who has what chairs for children? We have already bought a desk for the school (ordinary), and we want to take a good, orthopedic chair. it is also called trapsformer. what company do you recommend, what do you have? I'm waiting for advice.

We have a growing Moll chair, the model is called Maximo, it is set for any height and size of the child, not only the height, but also the depth of the seat is adjustable. The chair is very comfortable, the seat is dynamic, the back is comfortable and fits well to the back. The rollers are suitable for different surfaces, you can not use them at all, the covers on the chair are removable, you can wash or change. Great chair, I recommend!

Need children's furniture .. Irina35's blog on 7ya.ru

Help me choose a table and chair for a child, a 13-year-old girl, she loves to draw and do crafts, she sits at the table a lot, I want a good and comfortable chair and table. What do you recommend, what do you have?

For our daughter, we took a desk from the Vikos manufacturer. Its dimensions are 1200x900x750, just for a girl of 12-13 years old. If you are interested, you can make it to order with your favorite color at [link-1] Let your daughter have her favorite desk, at which she enjoys doing her homework and drawing.

Moll is a good company, made in Germany, the quality is high, I read a lot about this company before buying. We bought a moll table, Champion model, a table with a split top, it is convenient for drawing, reading and drawing. The table is made from good stuff, convenient and safe mechanisms. The table grows with the child, so it is suitable for any age and height, everything can be adjusted individually, in height. We also want to buy a chair from the same company, we like the Maximo model, a chair with the same functions, the height and depth of the seat, as well as the height of the back, are adjustable.

Need a good chair for a child. The child is 11 years old. I want to give a gift, he asks for a gaming chair, but I read they are not the right size and they will bend the back, and we already have scoliosis. So you need a good chair for a schoolboy to support the back and correct posture.

And whoever heard about Kotokota, it doesn’t look very convenient, but they praise him like that. it doesn't seem very comfortable at all. Who knows what?

Good Moll chairs, we bought such a chair a year ago for our child. Model Maximo, a very good purchase, the chair is still like new, the covers can be removed and washed, even the fabric is good and has kept a good look even after washing. The chair can be adjusted to the height of the child, the height and depth of the seat, as well as the height of the chair and the height of the backrest, everything can be adjusted. The chair grows with the child, our son has stretched out a lot in a year. The quality is very good, all mechanisms are safe, a good stable platform on which the chair stands. There are no armrests, there is a comfortable handle on the back of the chair.

There is a first-grader and an Ikeev table + chair. In terms of height, he sits perfectly behind him. BUT! When he moves in a chair, he catches the bottom of the table, in short, his legs close to the bottom of the table. I thought that while they were asking little, we would hold out. But I see that it’s a bit cramped for him on the table - he put the textbook, put the notebook => his elbow hangs. Share your impressions of your tables or desks. I do not want to buy anything and for one year. Thanks in advance.

Feedback from client Alena from Ufa: “The time has come and we thought that our child needs a growing chair. We asked in the search for an adjustable transforming chair and found a bunch of different brands. Best Choice was the chair Kotokota (Kotokota). Why he? Because it was in stock, because it is made in Russia, wooden, environmentally friendly, regulated. There is an adjustable footrest and seat. The husband said that it would work both as a high chair and as a chair for a schoolchild, he would not necessarily buy it.

Toy bag
- Shelf for books
– Hammock up to 6 years
— Hammock Maxi

Every modern parent cares about the health and comfort of the baby from birth. It is important to provide the child with all the conditions for active growth, recreation and study, surrounding him with functional furnishings, including furniture. One of these elements of the interior is the universal chair "grow-up". This design has external differences from the usual models.

Model Features

The "grow" chair is a unique piece of furniture that bears little resemblance to standard models chairs. The main feature of such structures is the functionality.

Growing furniture is able to change the height of the seat. Based on the age and individual characteristics of the child's body, at any time you can easily adjust the position of the backrest.

To create growing children's chairs, high-quality and safe materials are used. The most popular are the designs made of wood.

According to the manufacturers themselves, this furniture grows with the child. To change the position of the chair, you must use the set of fasteners that are available at the base of the model.

The device often provides a footrest, so that the child can experience maximum comfort and convenience while sitting on a chair.

How to choose?

A growing chair for a child involves use in different cases. This furniture is considered a good addition to dining table. Often children use these chairs to perform homework or creativity.

In order for the chair to be really useful for the child, it is necessary to choose the right model. It is important to build on several significant criteria, starting with the choice of material.

photos

Raw materials for the production of this furniture are diverse.

In addition to the tree recognized the best choice, plastic products are relevant. However, if brands consider such designs strong enough, practice shows the opposite.

Plastic - modern material, it looks beautiful in the interior, but the maximum where it can be used is in the additional elements of the chair. More often it is support for the design, which is in models for the smallest (from 6 months).

Plastic does not provide comfort, does not withstand significant mechanical damage, and if located near heating devices, it releases harmful substances into the air.

In addition to the material, it is important to take into account the age of the child and the features of the device. Manufacturers offer buyers models designed for children of different, including school age. The stores offer a wide range of growing chairs for first graders.

Compared to varieties for young children, these options have more extensive functional features.

Due to this, the chair can be used by a first grader and a senior student.

Designs based on two seats are in demand. One of these elements can be used instead of a footrest. The main advantage of these wooden models is their high functionality, as the seats easily adjust to the child's height.

In the process of choosing a suitable model, experts recommend paying attention to the transformation of the chair.

Various elements are used to fasten the seat. Most often, sawn grooves or bolts are used for these purposes.

The choice is important to make in a trusted store with a good reputation of real buyers. This will allow you to purchase a quality product that will last more than one year.

An important factor is convenience: if the child is uncomfortable, the product will cause negative emotions. It is important to choose a model in such a way that this chair is a favorite piece of furniture in the nursery.

How to do it yourself?

If you don’t like store-bought growing chairs, you can start creating furniture yourself. First you need to decide on the material.

It is best to use wood for the manufacture of a children's chair, as it is durable, reliable and attractive in appearance.

Then you need to prepare a template for work. In the drawings, it is necessary to draw each element of the structure, indicating the parameters. This will greatly simplify the manufacturing process.

After creating the template, you can proceed to the blanks. All prepared elements must be painted. The design of the chair should be chosen taking into account personal preferences and features of the children's room. After staining, all elements are assembled into a single structure.

Chair adjustment

It often happens that after prolonged or not entirely careful use, the chair staggers, the fasteners weaken, the furniture loses its former functionality.

You can solve this problem yourself, without asking for help from the master. All you need to do is tighten the fasteners tightly. First check whether these details really caused the chair to loosen.

Many companies present adjustable models to the attention of buyers. In this case, you can independently change the height of the seat, the position of the backrest and other components of the device. To do this, you need to study the manufacturer's instructions, and then set the desired dimensions.

Please note that many models are supplemented with a special stand for feeding small children. In the future, this element can be removed so that it does not interfere with the child.

We assemble a growing chair with our own hands.
I think it would be superfluous to once again talk about the relevance of the problem of maintaining correct posture in children. One of the most important conditions is to ensure the correct posture when sitting, which depends on many parameters. Ordinary chairs will not fit. Unfortunately, office chairs with a gas lift, they are also not able to solve this problem, since they do not have an adjustable footrest or seat adjustment, and seat height and back angle adjustments alone are not enough. In such a situation, a special adjustable chair will be a great solution!

On the Internet you can find many different options for every taste. From all the variety, I chose the design I liked.

The design is not as simple as it might seem at first glance. She is very technical. It is important to take into account the ratio of the dimensions of the elements, their relative position, strength and stability of the entire structure. Of course, no drawings could be found either on the manufacturer's website or on the Internet. Therefore, I had to develop the drawings myself. The more interesting. It took several days to design.

Unfortunately, I do not have a plotter at my disposal to display images. right size, and the program in which I worked does not know how to print large images in parts (or simply could not figure out how to do it). Therefore, we had to solve the problem in a roundabout way. The detail drawings were saved as regular high resolution photos. Further using free program PosteRazor are converted into PDF documents containing drawings in the correct scale and split into separate A4 sheets.

Do I have the right to publish them? Am I violating someone's copyright? After all, I spied a chair on the Internet and someone developed it! Let's figure it out.

This situation can be viewed from two points of view: ethical and legal. We will omit the ethical side of the issue, because here a whole range of well-reasoned opinions is possible, and most likely it will not be possible to come to the truth. But from a legal point of view, the search for truth is not so hopeless.

So, legally, a chair cannot be an object of copyright. In this case, according to the Civil Code, it can be either a utility model or an industrial design, which are recognized and protected only subject to state registration, on the basis of which federal agency The executive branch for intellectual property issues a patent. There is no mention of any patents on the manufacturer's website, most likely, no one patented this chair. To be honest, I don’t see what can be patented there - in comparison with analogues, neither special novelty nor originality. Although the design is quite successful. And I didn't find it on www.freepatent.ru either. This means that I will not violate anyone's patent rights for lack of such.

But the drawings, according to the Code of Administrative Offenses, are objects of copyright and are protected without any registration by default, as a type of work visual arts, (computer programs, by the way, as literary works). The drawings developed by me are not an exact copy of the original, which is not available to me, but are the result of intellectual work and reflect my vision of the design, the general features of which I saw in the photographs. And I have every right to publish the results of my work as an author. Unlike those who, without permission and reference to the source, post articles from my blog on their sites to attract visitors. Photographs need to be copyrighted.

Well, enough tediousness, it's time to get to work!
Drawings of a growing chair can be downloaded from the link: https://yadi.sk/d/-nS9on3WmbxdF
If there is no part in the archive, then its description will be further down the text.

We print them like a regular multi-page document on A4 sheets. At the same time, in the Acrobat Reader print wizard, it is important not to forget to specify the "Actual size" scale. As a result, after gluing individual sheets, we get a drawing of the part on a scale of 1: 1.

We cut out the drawing of the racks along the contour and paste it on a sheet of plywood.

Plywood 22 mm thick was chosen as the material for the racks. Cut out the first part, stepping back from the contour of 5 mm. In general, the quality and accuracy of the cut is not very important. If only there was some reserve.

Now the resulting rough edges of the workpiece must be aligned exactly according to the drawing. I usually use the term "comb" to refer to this action. To do this, we press a flat rail to the workpiece along the line of the drawing and pass along the edge with a copy cutter with an upper bearing. The roundings were processed by guiding the milling cutter by hand, followed by the adjustment of the roundings grinder. You can spend more time on this blank, because. it will serve as a template and the quality of the rest of the racks depends on the quality of its processing.

Now, having a template, we mark and cut out the rest of the blanks for the racks

Next, using self-tapping screws, we fix the template on the blanks. To tighten the screws in the template, we make holes in those places where there will be holes for attaching the seat and footrest. In this case, the head of the twisted self-tapping screw should not protrude from the template.

And with the help of a copy cutter, we align the edges of the workpiece according to the template.

Using a milling cutter inserted into the table, we make a groove in which the elements fixing the seat and footrest will move. For simplicity, I decided to call them runners. The depth of the groove is 10 mm, the width of the groove is 24 mm (maybe it would be more convenient to make the width of the groove equal to the width of the existing plywood - 22 mm, but there was no such cutter in the workshop).

In the middle of the groove, we make holes at equal distances. On the reverse side of the workpiece, at the exit point of the drill, it is imperative to place a bar so that the drill does not break out the bottom layer of veneer. It will be extremely difficult to close or mask such a chip.

We do the same with runners. We print the drawing in real size, cut it out and paste it on a plywood sheet. Next, cut out with a margin and "comb" as we did with the rack template.

From the same sheet of plywood 22 mm with a jigsaw, roughly cut out future runners with a margin.

With the same screws we fix the template on the workpiece

And on milling table using a copy cutter, we align the edges of the blanks according to the template.

Using an edge molding cutter, we round the edges on all the resulting parts. Rounding radius 4.8 mm.

Next, a rail is cut out, with the help of which the runners engage with the chute on the uprights. Rail height 20 mm, width 24 mm. Because I didn’t have either 20 mm or 24 mm plywood, it was decided to make the rail from massive ash. This wood has excellent strength characteristics.

A corresponding groove was made in the runners on the milling table and the slats were glued into it. At the same time, when you make a gutter, you must not forget that the runners are right and left.

After the glue dries, the slats are sawn and ground flush with the body of the runners. Also, holes are made in the runners for fixing them on the racks.

Also in the runners, grooves are milled parallel to the floor. Gutter depth 10 mm, width 16 mm. Seats and footrests will be fixed in these gutters. In the next photo you can see the finished runners.

We do the same with the seat and footrest templates: we print the drawing, glue it on plywood and cut out the blank.

In order to make even roundings, I used a thin rail of 5 mm plywood, passed between the self-tapping screws that set the desired radius. It bends well and creates smooth transitions. How it is done can be seen in the photo:

As a result, we get two templates - footrests (left) and seats (right). Next, we work with them according to an already worked out scheme - we mark the blanks (circle the templates with a pencil) and cut them out using a jigsaw with an indent of 5 mm. 16 mm plywood was used for them, although 22 mm is also possible. We fix the template on the workpiece with self-tapping screws and work out the edges with a copy cutter. Having ready-made templates the whole operation takes a few minutes. The small holes left on the finished parts from self-tapping screws can either be simply ignored due to their small size, or hidden with putty at the grinding stage. Personally, I went the first way. Don't forget to round off the edges with an edge cutter.

The template for the back did "in place". Therefore, there is no drawing of the back. I made the top and bottom edges according to the seat template. Backrest height 100 mm, Width 464 mm (depth of the groove for the backrest in the uprights 10 mm). After the template is ready, we make a couple of backs on it using an electric jigsaw and a copy cutter in a few minutes.

There are three crossbars in the chair. They are made from the same 22 mm sheet. The dimensions of the crossbars that fix the runners are 399x50x22 mm. The lower crossbar (in the lower part near the floor) - 444x30x22 mm. Using a 10 mm straight cutter, we make grooves for countersunk furniture nuts - barrels.

Next, we make a groove for the backrest. The angle of the backrest was chosen in accordance with GOST 19301.2-94. "Children's preschool furniture ..." The angle of inclination of the back along it is at least 5 degrees or more. My chair has an angle of 11 degrees - I find it a very comfortable angle.

We get a small pile of details

Each chair is assembled on hexagon bolts and furniture countersunk barrel nuts. Bolts have dimensions 6x70 and 6x50, nuts - 10x20 and 10x12. The mounting kit is shown in the photo.

Ready. As they say, "it seems to be true." During assembly, the quality of workmanship and fitting of parts is checked, minor flaws are eliminated, and “finishing with a file” is carried out. At this sawing-drilling-milling stage is completed.

The sanding and painting phase begins. Now the chairs are completely disassembled and all parts are sanded before coating. I used paper 180. In some places I had to fiddle with 80 and even 40.

Painting work is a separate discipline. A bad finish can ruin the whole job. Winter on the street and the lack of heating in the workshop made their own adjustments to the usual process. I had to paint the chair right at home. Therefore, neither an airbrush nor multi-component smelly varnishes can be used - only non-stinky water varnish and a brush.

Because the chair was made from the remnants of plywood, some parts were dirty. Unfortunately, it was not possible to completely get rid of them by grinding, so I decided to cover one chair dark color- "mahogany", the second - glossy opaque milky enamel. So far, only the first one is ready. The second, dairy, is waiting for its time.

If, after applying the first layer of varnish, the color lay unevenly, the details are covered with bald spots due to varying degrees of absorption, the pile has risen and the surface has become like sandpaper, and in general it all looks terrible and you want to quit everything, then you are on the right track. After the first layer has dried (after three or four hours), we take sandpaper with a grain size of 180 and grind all the raised pile. Next, we put the second layer, after which the surface became a little better after drying - there is no pile and the color is smoother, but still far from the picture on the label of the varnish can. Therefore, we matte the details with the same sandpaper and put the third layer. Behind him is a fourth. Etc. Continue until you are satisfied with the result. Five layers were enough for me, for which two days were spent.

The growing chair is ready. The cost of two chairs is a sheet of plywood 1500x1500 mm 22 mm thick, fasteners for 50 rubles. and a can of varnish. This also includes electricity, depreciation of fixed assets, the salary of a worker.

I saw similar designs on Amazon for 250 US dollars - not a price, but some kind of tin. We have them, of course, much cheaper.

Despite the questionable design, the design is quite well thought out.
This is not just a children's chair, it's more of an office furniture for a student. Because it is schoolchildren who spend many hours first at home, and then at computer games and for them, the correct comfortable posture is important for posture, less fatigue and preservation of vision. At the same time, students are still actively growing.

For greater comfort, you can make removable soft pads on the seat and back. As an option. But I do not see a special need - usually school furniture without pillows. Armrests are also unnecessary, because during writing or when working on the keyboard, the elbows should lie freely on the table so as not to cause tension in the shoulders. All these calculations are described in a whole set of GOSTs and the growing chair corresponds to them. In general, I am pleased with the result.

You can purchase some items from this blog in our VKontakte group: