The armchair is good place both for work and leisure. Before you make a chair with your own hands, you need to familiarize yourself with its models, since there are a large number of chairs. For some models of chairs, willow or rattan is needed, as when presented in other materials, they lose their charm. This piece of furniture can also be made of metal - forged rocking chairs look like jewelry in the interior.
Chair drawing.
DIY chair - wooden chair
Solid wood furniture is a symbol of solidity and reliability, even if it is a lattice model. It does not take much time to make a chair from a bar, and it can serve for many years without needing restoration. For manufacturing you will need:
- medium thickness timber;
- plywood;
- wood glue;
- primer;
- stain;
- furniture dowel;
- self-tapping screws;
- sandpaper 3 types;
- Bulgarian;
- screwdriver;
- hand drill;
- plane;
- clamps;
- sponge or foam rubber;
- brushes;
- pencil or marker;
- square;
- dye.
Chair making tools.
The thickness of the beam does not matter much, but when buying, you need to pay attention to a single section, which simplifies work and shows the quality of the workpieces.
Ideally, all blanks should be of the same thickness and with good linearity.
If one of the parts is twisted, this will greatly affect the integrity of the product, it may warp or crack during operation.
How to make a chair - manufacturing process
The beam is sawn into the required number of transverse slats and bearing additional seat crossbars. Good and fast work allows the availability circular saw. The edges of the resulting bars are marked, and drilled at the same distance through holes. The distance from these future fasteners to the edge of the bar must be at least 25 mm, otherwise the chair, made by hand, will not be strong enough. A drill stand will help you accurately maintain all the parameters for a variety of holes, on which you can set parameters such as the perpendicular of the holes, their dimensions and distance.
Before making a chair, one more safety concern is required - to process the ends and surface of the slats in order to prevent the appearance of splinters during operation.
In this case, all existing ribs are rounded with a grinder or planer. When the longitudinal slats are ready, the remnants of the beam are divided with a circular saw into squares, which will be used to separate the slats from each other in the structure.
Scheme of assembly of a garden chair.
Holes are also drilled in them, coinciding with those already on the finished bars, they need to be sanded and the ribs smoothed. Each master will determine the number of long bars and squares for himself, starting from the size of the chair and the thickness of the bar.
Dowel fasteners are inserted into the holes, a few drops of glue are added, after which each bar on both sides is connected to a pair of cubes. The blanks are aligned along the edges by attaching a rail, then left to dry, tightened with clamps. After drying, the wood is treated with stain. A rope can be threaded through the holes in the parts and the painted parts can be hung to dry. In the same way, varnishing occurs.
To make a chair with your own hands, the back and seat for the chair are cut out of plywood. They are twisted together using a pair of screws on the right and left. Additional strength can be given by dowels if holes are drilled under them and glued before use. All parts are painted in the desired color and varnished after drying. It remains only to make the final assembly of the body with the help of bushings and screw the seat. This unusual shape A bright and catchy armchair complements the interior well.
Do-it-yourself garden easy chair
Not everyone likes plastic chairs, which are currently used everywhere for decoration in the country house or in the garden of the recreation area. Garden light chairs made of wood look more appropriate on the site, and their manufacture does not take much time. Before you make a chair, you need to consider that its design should be light and comfortable, it is best to prefer a folding chair. This will allow you to quickly transfer furniture under the roof in case of rain, because even well-treated wood should not be exposed to moisture.
Scheme of connecting the legs of the chair.
Wood, in order to make a chair, you need to choose from hardwoods such as beech, walnut or oak. Pine, cedar, larch or aspen are also little susceptible to decay, but at the same time, pine is not resistant to mechanical stress, large dents remain on the surface. Boards should be chosen well dried or dried under a canopy before starting work. Materials and tools will need the following:
- Circular Saw;
- milling cutter;
- hacksaw;
- plane;
- screwdriver;
- drill;
- clamps;
- grinder;
- roulette;
- square;
- pencil;
- sandpaper;
- screws or screws;
- wood glue;
- drying oil or furniture varnish;
- stain.
Preparing and assembling parts
A garden chair will require two rear and two front legs, with the rear legs being longer. You need to cut out 2 supports for the armrests, a backrest and a jumper. For the rear pair of legs, armrests, backrest and seat, boards matched in color and texture are glued together until the desired width is obtained. To qualitatively glue the tree, grooves for the dowels are chosen at the ends. Paired parts can be sawn out at the same time by pulling two boards with clamps.
Rocking chair drawing.
Details are then adjusted to size using a milling cutter or planer. When cutting the back, the glue line, if present, should be placed in the middle of the part. The upper edge is rounded, and after that you can start assembling the garden chair, adjusting other elements as needed.
The rear legs are attached to the backrest with screws reinforced with glue. To ensure that the workpieces do not crack during assembly, the holes for the fasteners can be drilled in advance. The strength of the assembled seat will depend on the correct location of the boards on it. They should lie in the direction from one leg to another. The front legs are also screwed onto screws or self-tapping screws reinforced with glue.
Reliability and stability of the chair is given by a proleg - a jumper located between the front legs. Fasten it similarly to everything else, using glue and screws. Then the armrests and the support for them passing behind the back of the chair are attached.
The heads of all screws used for fastening should be sunk flush with the surface, and then closed with special plugs. The wood of the finished chair is impregnated with hot drying oil or stain, dried, varnished in several layers. You can opt for a special furniture varnish, but parquet or yacht varieties have the strongest coating.
Design for rocking chair
This chair can be used both in the garden and at home. By expanding the seat, it is possible to make not an armchair, but a whole bench on which several people can fit. For manufacturing you will need:
Chair seat assembly diagram.
- electric jigsaw;
- grinder;
- drills for wood of different diameters;
- screwdriver;
- square;
- roulette;
- pencil;
- plywood;
- self-tapping screws;
- confirmations;
- slats.
If the rocking chair is made by hand from start to finish, it is better to use high-quality materials so as not to spoil the work.
Making a rocking chair
The sides of the chair with a rounded bottom are cut out according to the developed pattern in the first place. They should be completely identical, and there should be no protruding corners on their lower part. Then a beam for the seat and back is cut, the number and length of which must be calculated separately for each model. The surface of each bar is sanded and polished, the corners are smoothed. If you plan to use the chair on the street, the ends of the boards should be given special attention. They are varnished at least 3 times, since it is there that the wood is especially loose and needs protection from atmospheric influences. In order to protect the street and garden furniture, the ends are impregnated several times with hot drying oil, and the fibers are flattened with a hammer.
The sidewalls are pulled together to the desired size by several drawers, drilling through the sidewalls. Then holes are drilled in the ends for fastening the bars. The bars themselves are also drilled in advance to avoid cracks during operation. It is more convenient to fasten the bars not between the sidewalls, but on top, somewhat going beyond the contour. In such a rocking chair there is more space, and it looks neater. Each screw should then be covered with an antiseptic and a plug placed on top. After that, it is made finishing products with waterproof types of varnishes, with drying of each layer for at least 12 hours. At least 3 layers are put, smeared with a thick layer, trying not to leave gaps. Only after this, the rocking chair can be considered finished.
You can buy anything in modern stores. A little imagination, a mouse and keyboard with Internet access, how a huge number of offers from social networks and online stores. It also happens that the financial situation is not the most prosperous, and purchases in online stores are considered luxury items. And sometimes you just want to do something with my own hands, they itch like that. Here is a small selection of examples of how you can make some furniture with your own hands.
DIY bean bag chair
In the first example, we will see the manufacture of frameless furniture, the most popular item in stores today is a bag chair. A photo of the chair with your own hands is presented below.
Material costs for one bean bag chair are $40. This includes: polystyrene balls (filler), inner cover, outer cover.
First, the inner cover is sewn and filled with foam balls, then the outer one. Then just insert the inner cover into the outer one and you get a finished bag chair.
The most difficult thing is to collect the balls in a bag, they are trying to jump out of it, I had to use a vacuum cleaner. This short instruction how to make a bag chair with your own hands.
DIY home chair
Now consider making your own ordinary home chair. Unfortunately, there were quite a few photos, there was no time to take pictures. The main stages were fixed in a timely manner, switching from a tedious workflow.
Wanted to get it regular chair, and not just some incomprehensible rookery. To make it strong and stable, like store options. I had to look on the Internet for views and drawings of chairs in order to correctly assemble my design. I suggest you immediately look at the photos of the process of assembling the chair.
At the first stage, the basis-frame for the future chair is made in the form of a semicircle. Used chipboard with timber. The base of the chair is 10 cm thick. This will just be enough to fix the walls. And vertical racks have the same final function.
Hardboard was perfect for the back, and plywood for the front wall. All the curves and outlines of the future chair were drawn by eye from the remaining wallpaper. For the base, children's wooden cubes were used.
In the next step, I started gluing cardboard to fill inner space. In the process of work, even the glue had to be changed, the initially selected PVA did not fit. The walls swelled and became like a waffle, the glue was replaced with ordinary carpentry glue. turned out to be the most the best choice from all that is offered. There was even an idea for a rocking chair with my own hands, but I will implement the idea a little later.
After looking at the photo, you can immediately easily figure out how the finished walls were obtained. For leveling, I used an ordinary knife, the material is easily cut and deformable.
At the next stage, work with glue and foam rubber, glue the entire surface with a layer of foam rubber, do not leave any bald spots and uncovered places. On a monotonous surface it is necessary to sew a cover.
Well, we have reached the final stage, when we pull the cover and get a beautiful finished chair. The product turned out to be very heavy, but it will be completely safe for children, can be attributed to the pluses. As for the fabric used, nothing was bought anywhere. The scraps available at home and the remnants of sewing were used.
We wanted to get temporary furniture, no one planned to make a chair for centuries. The sieve on the armrests, despite a good tack with glue, will peel off over time. If you say a little about the design of the chair, then it turned out to be simply indestructible.
Chair made of plastic bottles
What people don't do plastic bottles. And rafts in their youth, and bird feeders in kindergarten. This material has excellent inclinations for creativity.
Plastic bottles are a real find; in ordinary life, brooches, scoops, curtains and buckets are made from them. They are used to decorate flower beds, lay them out instead of pipes, make a hanging chair.
We wanted to try to make a chair out of bottles, why not? At first it all started with great enthusiasm for collecting bottles, and then everyone unanimously realized that there was simply nowhere to store them in such quantity in a small home area of the room.
Even at the initial stage of storage, it immediately became clear that the necks of the bottles were not needed, more precisely, half of the bottles. We decided to stack them in blocks of two bottles, carefully cutting off the throat and fastening 2 pieces to each other. One was cut off the neck, turned over and inserted into the second bottle. Of course, a wooden chair looks much more attractive and solid.
For the complete manufacture of the chair, it took about 90 bottles to collect, they were fastened together with adhesive tape, and covered with stretch film on top. It will not work to talk about the entire process of assembling the chair; at the time of writing the article, the chair was ready.
In short, we can say that you should not regret attaching bottles of scotch tape, because. during assembly, they can simply diverge from each other, you will have to spend a lot of time in order to redo the structure later. In this regard, I had to resort to stretch film and finalize the chair to the final stage.
DIY armchair photo
An armchair is one of the most comfortable, cozy, and therefore popular interior items. All chairs are usually divided into 2 categories: with or without a frame. The finished product is often expensive. But for home masters, nothing is impossible. A do-it-yourself chair is a completely solvable issue. In the article we will consider detailed master classes for the manufacture of soft products, as well as original wooden products for summer cottages.
Upholstery types
Upholstery for upholstered furniture- one of them important points. The presentable appearance of the product largely depends on it. Before you make a chair, decide on the type of upholstery fabric. Here are the most popular options:
- Velours. Noble fleecy fabric, reminiscent of short fur.
- Chenille. A fleecy, durable fabric made from a blend of natural and synthetic fibres. Doesn't roll, long lasting beautiful view.
- Flock. Outwardly, matter resembles velor, but even more practical. Flock is easily cleaned of dirt, so it is recommended to use it for upholstered furniture in a nursery.
- Jacquard. Durable dense patterned fabric, which is distinguished by increased durability. The disadvantage is that due to careless handling, puffs may appear.
- Artificial suede. High-strength material, which is great for making your own chair. Embossed faux suede looks especially beautiful.
- Tapestry. Solid expensive fabric made of natural fibers, with visible weaving. Threads of different shades form a pattern.
A set of necessary materials
When it comes to frame construction, the easiest option for a frame is plywood cut according to a template. The best option- birch plywood. From Supplies- screws and nails.
You will also need a set of carpentry tools:
- Metal ruler, compasses, protractor - for marking.
- Vise: manual and desktop.
- File.
- Hacksaw.
- Hand scissors.
- Hammer.
- Adjustable wrench set.
- Soldering iron.
- Pliers.
- Drill.
- Kerner.
- Chisel.
- Punch.
Important! If you want to make a fashionable and non-standard bean bag chair with your own hands, then the set of necessary equipment will be significantly reduced. It only takes sewing machine and stuffing material.
Work planning
The beginning of any business is drawing up a clear plan of action. Consider the design of future furniture. It is more difficult and expensive to make frame chairs, but they look more respectable than those of frameless structures.
Success in the manufacture of a bean bag chair depends on how accurately and correctly the patterns are drawn up. This is not so much furniture production as the art of tailoring. Do not forget to calculate the budget of the event.
Important! Not bad if you have an old, but quite decent and durable chair. In this case, much is simplified, since you can restore it and get an interesting vintage thing.
Classic soft product
Such a thing as a do-it-yourself easy chair requires a long preparatory phase. From the materials you will need:
- Plywood 20 mm thick.
- Sandpaper.
- Electric drill.
- Sets of screws and thin nails.
- Electric jigsaw.
- Metal bands.
- Foam rubber.
- Glue for joinery.
- Painter's tape.
- Line, roulette.
- Stain, glossy black dye.
- Pencil.
Now you can get to work:
- Download the drawing of the chair you like, calculate the consumption of materials.
- Make cardboard templates to scale, transfer the outlines to plywood, then cut out the details with a jigsaw.
- Clean and sand the surface of the wooden parts. Pay special attention to the end areas, soaking them well with drying oil.
- Paint or stain the sides. Reinforce the end parts of the sidewalls with metal rims. Fasten the rims with screws.
- The next step is the wrapping of the product. Start fitting from the back of the back, using artificial leather. Next, proceed to tightening the rest of the parts of the product. Secure the fabric with wallpaper nails.
Important! It is advisable to treat the attachment points with carpentry glue. The chair will be more solid.
Bag chair
This product is also known as the pear chair. To make it you will need:
- Coarse calico or satin fabric - 3.0 m.
- Fabric for the manufacture of the outer cover - 3.5 m.
- Zipper - 1.0 m.
- Filler.
- Pieces of contrasting fabric for decoration.
The procedure for the manufacture of this chair model is as follows:
- Download the bean bag chair patterns that you like the most.
- Make cardboard patterns to scale.
- Transfer the contours of the chair to the fabric. You will need to sew the inner and outer covers separately. As a result, you will get 2 bottoms (top and bottom) and 6 cloth wedges.
- Sew the wedges together. Leave in the received bag small plot unwired. Sew the top and bottom bottom. After you have finished sewing the top cover, sew the inner cover in the same order.
- Cut out decorative elements appliqués and sew on the outside.
- Insert the "zipper" into one of the wedges. In case of contamination, you can remove the outer part and wash.
- Stuff inner bag synthetic filler by about ⅔. Now it remains to put the inner bag in the outer one. Zip up.
The armchair is ready! As you can see, there is nothing particularly complicated here.
How to make an easy chair with your own hands for a children's room?
Making a frameless easy chair for a nursery is no more difficult than a regular bean bag chair. The difference is only in color.
Important! It is better to choose a fabric that is bright, attuning to positive and cheerfulness. Shades should not be too “flashy” and annoying.
Here is one of the options for upholstered furniture in the child's room:
- The frame chair can be made in the form of a semicircular sandwich. For the back wall, hardboard is used, for the front - plywood.
- Carefully glue the furniture foam rubber onto the base, on top of which the upholstery will lie.
Important! the best options upholstery material are flock or eco-leather. Even if a young artist paints the upholstery with felt-tip pens or paints, you can remove the traces completely.
- The maximum height of the baby seat must not exceed 600 mm.
Wooden chair for giving
Here's another interesting option: armchair made of wood with your own hands. Wood is a practical, beautiful and durable material, which, moreover, is perfectly processed. In addition, wood self-manufacturing home or country furniture has the following advantages:
- The availability of a variety of lumber, their relatively low cost.
- Naturalness, ecological cleanliness.
- Nice smell of wood. Coniferous wood smells especially pleasant.
- Unique wood grain.
Important! It must be taken into account that the conditions in which country furniture, if not extreme, then close to them. Therefore, special attention should be paid to the processing of parts with an antiseptic. In this case, the furniture will serve you much longer.
Best for home furniture production suitable pine, spruce, ash, oak, larch or beech. Details that are not heavily loaded can be made from linden or alder.
So, we make a garden chair with our own hands. Choose simpler drawings to start with. When choosing a design, be guided by two “golden rules”:
- Choose the design that is completely clear to you. Mentally work through the entire procedure. Prepare in advance the tools that are convenient for you.
- Consider the place of use of furniture and the design of the room in which this very furniture is to be entered. For example, the best option for giving is a folding product or an antique rocking chair.
Manufacturing procedure
Consider a simple model, which consists of the following components:
- Sidewalls - 2 pcs.
- Tsargi - 3 pcs.
- Cross rails - 35 pcs.
It is these 35 rails that will form the surface of the seat.
The most difficult part of the work is cutting out the side parts:
- First, make a pattern on cardboard, and only then, making sure that the steps are correct, transfer the outline to the material. The best option for making sidewalls is plywood with a thickness of 3 cm. Use an electric jigsaw to cut out parts.
- Sand the ends of the sidewalls. With help manual router or grinders chamfer.
- Now cut out 3 drawers from plywood. The length of each is 120 cm, the width is 10 cm. Sand these parts, no need to chamfer.
- From a 50x25 mm bar, cut 35 segments, each of which is 120 cm long. Next, as usual, is sanding and chamfering. For fastening, prepare 12 confirmations 5x120 mm and self-tapping screws for wood 4x45 mm (40 pieces).
- Mark the places for fastening the tsarg. There are 3 of them in total: in the foot, head and in the middle of the outer arcs of the sidewalls. Drill through 8mm holes for the sides.
- Pull off the side parts of the product with three sides. For holes in the end parts of the drawer, use a 5 mm drill.
- Now fix the pre-prepared segments of the bars to the seat using self-tapping screws.
- The final stage is to cover the zenoks and cracks with putty on wood. After that, sand the product, prime the surfaces and paint with varnish or acrylic paint.
footage
As you can see, making a chair with your own hands is quite realistic. In self-made chairs different types there is nothing particularly difficult. Good luck to you!
In this article, we will consider the topic of making classic furniture for almost all apartments and houses - a do-it-yourself chair. This chair made of solid wood with armrests will not be bulky and best use of such a product is tableware. According to these instructions, it will be possible to make it at home.
The production of the chair will take place in several stages. All of them will be presented below and you can easily make it in a few evenings if you have tools and materials, because all the schemes will be presented below. There will be no ready-made drawings in this article, since everything is done from improvised means: from boards, plywood bars, which are available.
frame
Let's call this stage - the frame of the chair.
Of course, almost the entire skeleton will be covered with foam rubber, cloth. Only part of the legs will remain visible.
The back legs are the most important parts of the wood chair because you have to make them at some angle.
Without thinking for a long time, for the manufacture of the back of the chair structure, we took the usual dining chair, which was available, although it was without a seat. But he was well suited for the role of a template. You can take some old grandmother's chair.
Markup was made on the board 50x150.
Be sure to mark the level of the seat of the chair, make it the same as for the chair. In this case, it was approximately 410 mm from the floor.
To cut the legs of a homemade fireplace chair, use a jigsaw.
Then we used the finished part as a template to make three more legs, because we make two chairs at once with our own hands from improvised materials.
The front legs will be straight and square - 55 × 55 mm. To obtain such a section, you can glue the boards together, and then saw them to the required size. We glued 2 pairs of 2 boards 120 wide and 30 mm thick.
There is no glue between boards 2 and 3
Note. A chair that has a solid structure is called a frame chair.
While the front legs are drying, we finished assembling the back frame - we made the upper part, in which the upper part has a slight rounding. Then they made the rear crossbar of the seat support.
We assembled all parts of the back using self-tapping screws 60 mm long. Before tightening the self-tapping screws, it is necessary to apply carpenter's glue to all connections, drill mounting holes.
Mounting holes are also called - auxiliary or guides. They must be drilled so that the self-tapping screw does not go to the side when screwing and so that the workpiece does not crack. The diameter of this hole is approximately equal to ⅔ of the diameter of the self-tapping screw.
We continue to make our wooden chair with our own hands. The blanks for the front legs stuck together and dried. We cut them to the required size 55 × 55 mm.
Lay them on the backrest structure and check the length of the legs and whether they lie on the same surface so that the chair does not wobble when in use. If the lengths are different, then align them.
The ends of the front legs need to be narrowed. To do this, make small bevels on all four sides.
Make side rails 400 mm long and fasten them as shown in the figure below. For better fixation, it is advisable to use screwing screws at an angle, having previously made auxiliary holes.
Install the front seat support bar. It is the same length as the back bar.
To make the English armchair with ears strong, we prepared four parts, the ends of which were cut at an angle of 45 degrees. We applied glue and fixed them with self-tapping screws in the corners of the frame.
Then they sawed off a piece of plywood to fit the size of the seat. Plywood thickness 18 mm. We fixed them with self-tapping screws, having previously applied glue.
If you want to make the seat softer, then you need to use furniture textile tapes instead of plywood. We will use such tapes in the manufacture of the back.
The chair must be with armrests, otherwise it will be a chair. Consider the stages of their manufacture.
The A-pillar and armrest bar should be set at right angles. Determine the height of the armrest yourself, it will be equal to 200-300 mm. The cross section of the bars is square - 50 × 50 mm.
Secure them with self-tapping screws, screwing them in at an angle.
A classic chair should be with “ears”. To make them, prepare a board and a bar of the same thickness for each side. Examine all the photos of the “ear” making process. Connect the blanks with self-tapping screws, then draw a rounding and cut along the lines. Fasten the finished assembly to the back and armrest.
For the right side, use the left “ear” as a template
You might think that making a chair with your own hands is not so simple task, but I want to assure you that the hardest part is over.
Before proceeding with the upholstery, we will strengthen the frame a little - add crossbars to the back and armrests, as shown in the photo.
Add a plank to level the surface of the armrest, round it and sand it.
Upholstery
Now you can start the upholstery process.
Cut foam rubber 50 mm thick to the size of the seat, glue it to the surface of the plywood.
Fasten the horizontal textile straps to the back of the chair with a construction stapler, and then the vertical ones.
Take 10 mm foam rubber, cut off a piece from it, which will be 40-50 mm larger than the seat area.
Now cover the top with furniture cloth. Then, using a furniture stapler, fasten the cover, synthetic winterizer and foam rubber to the chair seat structure on all four sides.
We fix foam rubber 25 mm thick on the sidewalls and armrests of the chair. To bypass roundings, make several cuts as shown in the photos below.
Then remove all unnecessary.
We continue to consider the topic of how to make a fireplace chair with your own hands. The furniture fabric at the back must be fixed, as shown in the photo.
At the front of the seat, we made a slit so that the fabric can be folded over and secured.
An overview photograph of the intermediate stage of manufacturing the chair without drawings.
Then we covered the sidewall and armrests with padding polyester. To fix the synthetic winterizer, it is better to use aerosol glue so that the bonding occurs over the entire surface.
We wrap the almost finished chair with armrests with a cloth.
And on the front, at the junction of the armrest with the seat, we bend at an angle.
See how the skin is fastened from the inner invisible part, the excess is cut off.
Most likely you have already noticed that the sidewall itself is not sheathed. Because for this we will use a separate piece of fabric, it is easier to fit all the bends and roundings - we do all this at home.
And here is the view from the outside and what will remain in the invisible part.
Finally we got to the back. We use the same foam rubber (25 mm thick), synthetic winterizer and go through all the steps that were made with the armrests, sidewalls.
We close everything neatly with a cloth.
Video on how to make a do-it-yourself chester chair with leather coating
Before sheathing the back, remove all unnecessary, cut the fabric, threads. Nothing should be left protruding beyond the frame.
To give volume and a complete look, we need the back of the wooden chair to be beautiful and even, for this we will fix the straps and the lining fabric on top of them, as shown in the photo.
In the manufacture, we do not use the drawing of the chair with exact dimensions, we do everything locally. But if you will make 2 or more products and you want them all to be the same, then based on the first chair, take all the necessary measurements and transfer them to paper.
Fasten the synthetic winterizer and then the fabric on it.
Close-up of the back of the top of the back.
We offer you to watch a video with different chips and useful tips. Video on foreign language, but it's understandable.
DIY sofa chair master class
We fix the textile straps with outside sides and armrests. Then cover with a cloth.
Then we attach the fabric along the back edge.
Catch the fabric pattern so that the picture does not have any overlaps at the fold.
How to sew the corners of fabric beautifully
Chair examples
You can also make a round chair with your own hands
Wooden chair-sofa
Wooden chairs with their own hands. Examples of self-made products
Not only craftsmen know how to make an exclusive out of improvised materials. comfortable furniture. The advantage of such an occupation is obvious - it is the possibility of translating into reality the most daring ideas for a variety of living space. An additional bonus is the low cost of making homemade soft chairs with your own hands. Following the advice of designers, you can make an easy chair for a pleasant pastime in your own home. At home, you can exactly repeat all the stages of factory production of this modern and convenient attribute for decorating a nursery or living room. On the Internet, you can find both the simplest and most complex schemes.
The first step in the manufacture of home upholstered furniture is the choice of fabric for the external design of the soft parts of the structure. Each master selects upholstery depending on physical properties and price aspects and features that different drawings have. Consider the most common fabrics for decorating chairs in our time:
- velor - velvety to the touch, gives the furniture a certain charm;
Velor upholstered
- flog - a distant analogue of velor, easy to clean, so designers use it to decorate children's upholstered furniture;
Flog in upholstery
- chenille - a fabric based on a combination of natural and synthetic fibers, has a special wear resistance (a well-thought-out structure prevents the formation of pellets);
Chinille in upholstery
- jacquard - the upholstery is considered durable, but over time, the loops turn into puffs;
- natural tapestry - the most expensive and beautiful type of fabric for upholstery;
Jacquard in upholstery
- artificial suede - a universal option for armchairs in a sunny room, resistant to UV rays and easy to clean;
Upholstered faux suede
- leatherette is a durable material that allows you to play with decorative embossing.
Leatherette in upholstery
Material, fittings, tools for frame attribute
Creating a frame chair from scratch presents some difficulties. But the finished product will have a more respectable appearance. You can verify this by looking at the photo. finished products home craftsmen. You can also use the old Soviet "grandmother's" chair for the base.
To make a simple frame for a soft chair, you need to pick up strong sheets of 20 mm plywood for cutting out parts with your own hands. Also useful is a standard repair tool kit with an electric drill, jigsaw, steel ruler, emery cloth, metal rims, masking tape, pencil, tape measure, thin nails, self-tapping screws, wood glue, stain, glossy paint. For upholstery you need: artificial leather or fabric, foam rubber (filler).
Step-by-step creation of upholstered furniture with a wooden base
- If you do not know how to make a drawing for the base, then look for ready-made schemes on the net. As a rule, they are transferred to a cardboard template with a pencil. Only after that proceed to perform the operations of the described algorithm. This will help save on excess material, or vice versa - do not buy the missing parts.
- According to the cardboard template, future constituent elements are cut out of plywood sheets:
- banana-shaped sidewalls;
- cross bars.
It is important to determine the desired angles of inclination, bending and dimensions of the future frame. This will help the photo of the finished chair, created according to your scheme.
- The next stage is the surface treatment of wooden parts by cleaning and grinding. With special care, the ends are worked out to improve the quality of the work done. Previously, these parts are impregnated with heated drying oil and only then bends are formed with a hammer, if they are provided for in the sketch. Each component is cut with an electric jigsaw.
- Stained or treated with varnish-stained sidewalls. The ends of the side parts are reinforced with metal rims.
- The next course of action is connected with the close-fitting of the frame. Using an electric drill, make the necessary holes. The rims are fixed with screws.
- First, the back of the back is covered with artificial leather or fabric, then the remaining fragments of the structure, incl. and seats.
- The upholstery is fixed with wallpaper nails, which are characterized by large hats. In the back of the frame chair, the upholstery is fixed along the edge, along the transverse parts to better cover the slats.
Pattern of a round chair wooden frame We sheathe the frame with fiberboard cardboard
Experienced furniture makers advise the attachment points to be additionally treated with wood glue. Such a move is needed to increase durability created furniture with your own hands.
Secrets of reliable upholstery: how to sew
The process of stretching the upholstery of soft chairs has its own nuances:
- Foam rubber is cut to the size of the seat (average thickness - 5 cm). The part is glued to the surface of the plywood sheet.
- Horizontal and vertical fabric straps are fixed to the back with a construction stapler. Similar belts are added to the armrests and sidewalls from the inside along the form.
- From a piece of foam rubber 0.1 cm thick, a part is cut off, which will be larger in size than the area of the seat (difference by 4-5 cm). They take a flap of synthetic winterizer fabric of the same size with an elongated front part and fix it with their own hands.
- After the done manipulations, the upholstery is covered with furniture fabric. With the help of a stapler, textiles are fixed in all corners of the cover, the synthetic winterizer-foam layer to the seat frame of the chair.
- The sidewalls and armrests are also covered with synthetic winterizer, fixed with aerosol glue over the entire surface. Only after that, the parts are sheathed with a cloth, securing the flap along the staples.
We sheathe the chair with foam rubber. In addition, we put a synthetic winterizer
